! Started logfile: J2346+3011_S_2017_02_19_pus_uvs.log on Sat May 4 19:02:28 2019 obs J2346+3011_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2346+3011_S_2017_02_19_pus_uva.fits ! AN table 1: 221 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.694017 visibilities/baseline/integration-bin. ! Found source: J2346+3011 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 27608 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2346+3011_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 358 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 358 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 358 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1026 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914639Jy sigma=0.008010 ! Fit after self-cal, rms=0.899750Jy sigma=0.007871 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=5.115 mas, bpa=-4.235 degrees ! Estimated noise=882.486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0833517 Jy ! Component: 100 - total flux cleaned = 0.103639 Jy ! Total flux subtracted in 100 components = 0.103639 Jy ! Clean residual min=-0.018412 max=0.062646 Jy/beam ! Clean residual mean=-0.000007 rms=0.004842 Jy/beam ! Combined flux in latest and established models = 0.103639 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.103639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126610Jy sigma=0.001034 ! Fit after self-cal, rms=0.126419Jy sigma=0.001033 ! Inverting map ! Added new window around map position (-12.5, 13.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495933 Jy ! Component: 100 - total flux cleaned = 0.0642225 Jy ! Total flux subtracted in 100 components = 0.0642225 Jy ! Clean residual min=-0.011302 max=0.029776 Jy/beam ! Clean residual mean=-0.000010 rms=0.002910 Jy/beam ! Combined flux in latest and established models = 0.167862 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 10 components and 0.167862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108756Jy sigma=0.000878 ! Fit after self-cal, rms=0.103472Jy sigma=0.000833 ! Inverting map ! Added new window around map position (4.5, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309837 Jy ! Component: 100 - total flux cleaned = 0.0470862 Jy ! Total flux subtracted in 100 components = 0.0470862 Jy ! Clean residual min=-0.007710 max=0.008288 Jy/beam ! Clean residual mean=-0.000006 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 0.214948 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.214948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092698Jy sigma=0.000744 ! Fit after self-cal, rms=0.091561Jy sigma=0.000735 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132142 Jy ! Component: 100 - total flux cleaned = 0.0215121 Jy ! Total flux subtracted in 100 components = 0.0215121 Jy ! Clean residual min=-0.006769 max=0.006467 Jy/beam ! Clean residual mean=-0.000005 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.23646 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.23646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088982Jy sigma=0.000715 ! Fit after self-cal, rms=0.088865Jy sigma=0.000714 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=6.053 mas, bpa=-2.343 degrees ! Estimated noise=538.097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00921963 Jy ! Component: 100 - total flux cleaned = 0.0159441 Jy ! Component: 150 - total flux cleaned = 0.0213531 Jy ! Component: 200 - total flux cleaned = 0.0257973 Jy ! Total flux subtracted in 200 components = 0.0257973 Jy ! Clean residual min=-0.005625 max=0.006159 Jy/beam ! Clean residual mean=-0.000007 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.262257 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 60 components and 0.262257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087224Jy sigma=0.000704 ! Fit after self-cal, rms=0.087174Jy sigma=0.000703 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 0.97 KP 0.96 ! LA 0.97 MK 0.98 NL 0.90 OV 1.03 ! PT 1.00* SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 1.00 KP 0.92 ! LA 0.95 MK 0.98 NL 1.19 OV 1.06 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.96 KP 0.81 ! LA 0.73 MK 1.01 NL 1.41 OV 0.97 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.03 HN 0.86 KP 1.00* ! LA 0.80 MK 1.34 NL 1.00* OV 0.99 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.087174Jy sigma=0.000703 ! Fit after self-cal, rms=0.080706Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=6.121 mas, bpa=-2.067 degrees ! Estimated noise=522.373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-74, 36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00448059 Jy ! Component: 100 - total flux cleaned = 0.00739989 Jy ! Component: 150 - total flux cleaned = 0.00946175 Jy ! Component: 200 - total flux cleaned = 0.0113095 Jy ! Total flux subtracted in 200 components = 0.0113095 Jy ! Clean residual min=-0.002640 max=0.002939 Jy/beam ! Clean residual mean=0.000001 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.273567 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 103 components and 0.273567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080391Jy sigma=0.000669 ! Fit after self-cal, rms=0.080484Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080484Jy sigma=0.000668 ! Fit after self-cal, rms=0.080217Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=6.119 mas, bpa=-1.983 degrees ! Estimated noise=521.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022444 Jy ! Component: 100 - total flux cleaned = 0.00366633 Jy ! Component: 150 - total flux cleaned = 0.004632 Jy ! Component: 200 - total flux cleaned = 0.00558555 Jy ! Total flux subtracted in 200 components = 0.00558555 Jy ! Clean residual min=-0.001914 max=0.002036 Jy/beam ! Clean residual mean=0.000003 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.279152 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 128 components and 0.279152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080115Jy sigma=0.000662 ! Fit after self-cal, rms=0.080157Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151398 Jy ! Component: 100 - total flux cleaned = 0.00222551 Jy ! Component: 150 - total flux cleaned = 0.00290993 Jy ! Component: 200 - total flux cleaned = 0.00353676 Jy ! Total flux subtracted in 200 components = 0.00353676 Jy ! Clean residual min=-0.001908 max=0.001662 Jy/beam ! Clean residual mean=0.000002 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.282689 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 144 components and 0.282689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080100Jy sigma=0.000661 ! Fit after self-cal, rms=0.080096Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080096Jy sigma=0.000661 ! Fit after self-cal, rms=0.079931Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=6.119 mas, bpa=-1.905 degrees ! Estimated noise=520.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110971 Jy ! Component: 100 - total flux cleaned = 0.00158611 Jy ! Component: 150 - total flux cleaned = 0.00205086 Jy ! Component: 200 - total flux cleaned = 0.00254134 Jy ! Total flux subtracted in 200 components = 0.00254134 Jy ! Clean residual min=-0.001734 max=0.001529 Jy/beam ! Clean residual mean=0.000002 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.28523 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 151 components and 0.28523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079900Jy sigma=0.000661 ! Fit after self-cal, rms=0.079901Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449693 Jy ! Component: 100 - total flux cleaned = 0.000830015 Jy ! Component: 150 - total flux cleaned = 0.00107799 Jy ! Component: 200 - total flux cleaned = 0.00133888 Jy ! Total flux subtracted in 200 components = 0.00133888 Jy ! Clean residual min=-0.001737 max=0.001478 Jy/beam ! Clean residual mean=0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.286569 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 163 components and 0.286569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079886Jy sigma=0.000660 ! Fit after self-cal, rms=0.079885Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079885Jy sigma=0.000660 ! Fit after self-cal, rms=0.079804Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.637 mas, bmaj=8.855 mas, bpa=2.143 degrees ! Estimated noise=688.305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146961 Jy ! Component: 100 - total flux cleaned = 0.00256938 Jy ! Component: 150 - total flux cleaned = 0.0033723 Jy ! Component: 200 - total flux cleaned = 0.003963 Jy ! Total flux subtracted in 200 components = 0.003963 Jy ! Clean residual min=-0.002024 max=0.002034 Jy/beam ! Clean residual mean=0.000005 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.290532 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 190 components and 0.290532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079799Jy sigma=0.000660 ! Fit after self-cal, rms=0.079799Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000546969 Jy ! Component: 100 - total flux cleaned = 0.000911647 Jy ! Component: 150 - total flux cleaned = 0.00125531 Jy ! Component: 200 - total flux cleaned = 0.00151957 Jy ! Total flux subtracted in 200 components = 0.00151957 Jy ! Clean residual min=-0.002039 max=0.001976 Jy/beam ! Clean residual mean=0.000005 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.292052 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 198 components and 0.292052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079797Jy sigma=0.000660 ! Fit after self-cal, rms=0.079797Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=6.118 mas, bpa=-1.845 degrees ! Estimated noise=520.149 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.09 x 6.118 at -1.845 degrees (North through East) ! Clean map min=-0.0016204 max=0.1064 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=5.155 mas, bpa=-3.527 degrees ! Estimated noise=864.449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0936157 Jy ! Component: 100 - total flux cleaned = 0.144318 Jy ! Component: 150 - total flux cleaned = 0.176218 Jy ! Component: 200 - total flux cleaned = 0.19672 Jy ! Total flux subtracted in 200 components = 0.19672 Jy ! Clean residual min=-0.005790 max=0.011255 Jy/beam ! Clean residual mean=-0.000001 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.19672 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.19672 Jy ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=6.118 mas, bpa=-1.845 degrees ! Estimated noise=520.149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161881 Jy ! Component: 100 - total flux cleaned = 0.0273031 Jy ! Component: 150 - total flux cleaned = 0.0353781 Jy ! Component: 200 - total flux cleaned = 0.0416953 Jy ! Total flux subtracted in 200 components = 0.0416953 Jy ! Clean residual min=-0.003310 max=0.003777 Jy/beam ! Clean residual mean=-0.000001 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.238415 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 0.238415 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.637 mas, bmaj=8.855 mas, bpa=2.143 degrees ! Estimated noise=688.305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00902819 Jy ! Component: 100 - total flux cleaned = 0.0158962 Jy ! Component: 150 - total flux cleaned = 0.02145 Jy ! Component: 200 - total flux cleaned = 0.0260459 Jy ! Total flux subtracted in 200 components = 0.0260459 Jy ! Clean residual min=-0.003328 max=0.003878 Jy/beam ! Clean residual mean=0.000000 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.264461 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384177 Jy ! Component: 100 - total flux cleaned = 0.00706939 Jy ! Component: 150 - total flux cleaned = 0.00983238 Jy ! Component: 200 - total flux cleaned = 0.012229 Jy ! Total flux subtracted in 200 components = 0.012229 Jy ! Clean residual min=-0.002381 max=0.002624 Jy/beam ! Clean residual mean=0.000002 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.27669 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 123 components and 0.27669 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=6.118 mas, bpa=-1.845 degrees ! Estimated noise=520.149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229184 Jy ! Component: 100 - total flux cleaned = 0.00332237 Jy ! Component: 150 - total flux cleaned = 0.00422543 Jy ! Component: 200 - total flux cleaned = 0.00510061 Jy ! Total flux subtracted in 200 components = 0.00510061 Jy ! Clean residual min=-0.001719 max=0.002018 Jy/beam ! Clean residual mean=0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.28179 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 141 components and 0.28179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079941Jy sigma=0.000662 ! Fit after self-cal, rms=0.079904Jy sigma=0.000661 wmodel J2346+3011_S_2017_02_19_pus_map.mod ! Writing 141 model components to file: J2346+3011_S_2017_02_19_pus_map.mod wobs J2346+3011_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2346+3011_S_2017_02_19_pus_uvs.fits wwins J2346+3011_S_2017_02_19_pus_map.win ! wwins: Wrote 5 windows to J2346+3011_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508414 Jy ! Component: 100 - total flux cleaned = 0.000507455 Jy ! Component: 150 - total flux cleaned = 0.000628049 Jy ! Component: 200 - total flux cleaned = 0.000715346 Jy ! Component: 250 - total flux cleaned = 0.000770684 Jy ! Component: 300 - total flux cleaned = 0.000931371 Jy ! Component: 350 - total flux cleaned = 0.00103491 Jy ! Component: 400 - total flux cleaned = 0.00118545 Jy ! Component: 450 - total flux cleaned = 0.00128291 Jy ! Component: 500 - total flux cleaned = 0.00144986 Jy ! Component: 550 - total flux cleaned = 0.00151931 Jy ! Component: 600 - total flux cleaned = 0.00161007 Jy ! Component: 650 - total flux cleaned = 0.00161041 Jy ! Component: 700 - total flux cleaned = 0.0016758 Jy ! Component: 750 - total flux cleaned = 0.00167605 Jy ! Component: 800 - total flux cleaned = 0.00175953 Jy ! Component: 850 - total flux cleaned = 0.00184154 Jy ! Component: 900 - total flux cleaned = 0.0019017 Jy ! Component: 950 - total flux cleaned = 0.00194112 Jy ! Component: 1000 - total flux cleaned = 0.00201894 Jy ! Component: 1050 - total flux cleaned = 0.00205711 Jy ! Component: 1100 - total flux cleaned = 0.00213262 Jy ! Component: 1150 - total flux cleaned = 0.00215098 Jy ! Component: 1200 - total flux cleaned = 0.00224256 Jy ! Component: 1250 - total flux cleaned = 0.00227824 Jy ! Component: 1300 - total flux cleaned = 0.00226029 Jy ! Component: 1350 - total flux cleaned = 0.00227796 Jy ! Component: 1400 - total flux cleaned = 0.00229536 Jy ! Component: 1450 - total flux cleaned = 0.00234664 Jy ! Component: 1500 - total flux cleaned = 0.00234651 Jy ! Component: 1550 - total flux cleaned = 0.00232974 Jy ! Component: 1600 - total flux cleaned = 0.00239614 Jy ! Component: 1650 - total flux cleaned = 0.00241261 Jy ! Component: 1700 - total flux cleaned = 0.00241286 Jy ! Component: 1750 - total flux cleaned = 0.00247684 Jy ! Component: 1800 - total flux cleaned = 0.00241355 Jy ! Component: 1850 - total flux cleaned = 0.00239815 Jy ! Component: 1900 - total flux cleaned = 0.00247536 Jy ! Component: 1950 - total flux cleaned = 0.00244463 Jy ! Component: 2000 - total flux cleaned = 0.00244488 Jy ! Component: 2050 - total flux cleaned = 0.00250491 Jy ! Component: 2100 - total flux cleaned = 0.00248991 Jy ! Component: 2150 - total flux cleaned = 0.00250481 Jy ! Component: 2200 - total flux cleaned = 0.002592 Jy ! Component: 2250 - total flux cleaned = 0.00266395 Jy ! Component: 2300 - total flux cleaned = 0.00262108 Jy ! Component: 2350 - total flux cleaned = 0.00269192 Jy ! Component: 2400 - total flux cleaned = 0.00274789 Jy ! Component: 2450 - total flux cleaned = 0.00276176 Jy ! Component: 2500 - total flux cleaned = 0.00283065 Jy ! Component: 2550 - total flux cleaned = 0.00281694 Jy ! Component: 2600 - total flux cleaned = 0.00285764 Jy ! Component: 2650 - total flux cleaned = 0.00287117 Jy ! Component: 2700 - total flux cleaned = 0.00292445 Jy ! Component: 2750 - total flux cleaned = 0.00296406 Jy ! Component: 2800 - total flux cleaned = 0.00297717 Jy ! Component: 2850 - total flux cleaned = 0.00301599 Jy ! Component: 2900 - total flux cleaned = 0.00305439 Jy ! Component: 2950 - total flux cleaned = 0.00302885 Jy ! Component: 3000 - total flux cleaned = 0.0030288 Jy ! Component: 3050 - total flux cleaned = 0.00305389 Jy ! Component: 3100 - total flux cleaned = 0.00304154 Jy ! Component: 3150 - total flux cleaned = 0.00306628 Jy ! Component: 3200 - total flux cleaned = 0.00307867 Jy ! Component: 3250 - total flux cleaned = 0.00311515 Jy ! Component: 3300 - total flux cleaned = 0.00309106 Jy ! Component: 3350 - total flux cleaned = 0.00310307 Jy ! Component: 3400 - total flux cleaned = 0.00312672 Jy ! Component: 3450 - total flux cleaned = 0.00309122 Jy ! Component: 3500 - total flux cleaned = 0.00311454 Jy ! Component: 3550 - total flux cleaned = 0.00310285 Jy ! Component: 3600 - total flux cleaned = 0.00309137 Jy ! Component: 3650 - total flux cleaned = 0.00304557 Jy ! Component: 3700 - total flux cleaned = 0.00306822 Jy ! Component: 3750 - total flux cleaned = 0.00303433 Jy ! Component: 3800 - total flux cleaned = 0.0030231 Jy ! Component: 3850 - total flux cleaned = 0.00301206 Jy ! Component: 3900 - total flux cleaned = 0.00298996 Jy ! Component: 3950 - total flux cleaned = 0.0030118 Jy ! Component: 4000 - total flux cleaned = 0.00302267 Jy ! Component: 4050 - total flux cleaned = 0.00301179 Jy ! Total flux subtracted in 4096 components = 0.00300102 Jy ! Clean residual min=-0.000662 max=0.000641 Jy/beam ! Clean residual mean=0.000000 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.284791 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 466 components and 0.284792 Jy ![Exited script file: muppet] wmap "J2346+3011_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.09 x 6.118 at -1.845 degrees (North through East) ! Clean map min=-0.0012937 max=0.10714 Jy/beam ! Writing clean map to FITS file: J2346+3011_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107139 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193382 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.541491 0.541491 1.08298 2.16596 4.33192 8.66385 17.3277 34.6554 69.3108 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.09 x 6.118 at -1.845 degrees (North through East) ! Clean map min=-0.0012937 max=0.10714 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2346+3011_S_2017_02_19_pus_uvs.log closed on Sat May 4 19:02:34 2019