! Started logfile: J2345-0717_S_2017_07_09_pus_uvs.log on Wed May 8 14:59:18 2019 obs J2345-0717_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J2345-0717_S_2017_07_09_pus_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9482 visibilities/baseline/integration-bin. ! Found source: J2345-0717 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 24236 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2345-0717_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 823 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.939774Jy sigma=0.008408 ! Fit after self-cal, rms=0.929522Jy sigma=0.008324 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=7.05 mas, bpa=-5.21 degrees ! Estimated noise=884.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0528207 Jy ! Component: 100 - total flux cleaned = 0.0669295 Jy ! Total flux subtracted in 100 components = 0.0669295 Jy ! Clean residual min=-0.003601 max=0.006405 Jy/beam ! Clean residual mean=0.000005 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.0669295 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0669295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081067Jy sigma=0.000693 ! Fit after self-cal, rms=0.081056Jy sigma=0.000692 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767245 Jy ! Component: 100 - total flux cleaned = 0.0124014 Jy ! Total flux subtracted in 100 components = 0.0124014 Jy ! Clean residual min=-0.002951 max=0.004551 Jy/beam ! Clean residual mean=0.000005 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0793309 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.0793309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080018Jy sigma=0.000683 ! Fit after self-cal, rms=0.080012Jy sigma=0.000682 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=8.198 mas, bpa=-3.936 degrees ! Estimated noise=593.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526462 Jy ! Component: 100 - total flux cleaned = 0.00829565 Jy ! Component: 150 - total flux cleaned = 0.0104986 Jy ! Component: 200 - total flux cleaned = 0.0121549 Jy ! Total flux subtracted in 200 components = 0.0121549 Jy ! Clean residual min=-0.002314 max=0.002552 Jy/beam ! Clean residual mean=0.000008 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0914858 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 67 components and 0.0914858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079631Jy sigma=0.000679 ! Fit after self-cal, rms=0.079626Jy sigma=0.000679 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.98 KP 0.98 ! LA 0.96 MK 1.04 NL 0.95 OV 1.03 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.02 HN 1.04 KP 0.97 ! LA 0.93 MK 1.07 NL 1.02 OV 1.08 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.99 KP 0.96 ! LA 0.94 MK 1.05 NL 1.03 OV 0.95 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.89 KP 1.00* ! LA 0.95 MK 1.07 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.079626Jy sigma=0.000679 ! Fit after self-cal, rms=0.079577Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=8.244 mas, bpa=-3.628 degrees ! Estimated noise=592.643 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012706 Jy ! Component: 100 - total flux cleaned = 0.00164584 Jy ! Component: 150 - total flux cleaned = 0.00190439 Jy ! Component: 200 - total flux cleaned = 0.00199004 Jy ! Total flux subtracted in 200 components = 0.00199004 Jy ! Clean residual min=-0.002043 max=0.002218 Jy/beam ! Clean residual mean=0.000004 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0934758 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 81 components and 0.0934758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079547Jy sigma=0.000677 ! Fit after self-cal, rms=0.079553Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079553Jy sigma=0.000677 ! Fit after self-cal, rms=0.080714Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=8.304 mas, bpa=-3.563 degrees ! Estimated noise=595.635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104485 Jy ! Component: 100 - total flux cleaned = 0.00134769 Jy ! Component: 150 - total flux cleaned = 0.00141645 Jy ! Component: 200 - total flux cleaned = 0.00147865 Jy ! Total flux subtracted in 200 components = 0.00147865 Jy ! Clean residual min=-0.001782 max=0.001977 Jy/beam ! Clean residual mean=0.000004 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0949545 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.0949545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080697Jy sigma=0.000675 ! Fit after self-cal, rms=0.080729Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332803 Jy ! Component: 100 - total flux cleaned = 0.000390395 Jy ! Component: 150 - total flux cleaned = 0.000407939 Jy ! Component: 200 - total flux cleaned = 0.00042515 Jy ! Total flux subtracted in 200 components = 0.00042515 Jy ! Clean residual min=-0.001798 max=0.001920 Jy/beam ! Clean residual mean=0.000004 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0953796 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.0953796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080721Jy sigma=0.000675 ! Fit after self-cal, rms=0.080722Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080722Jy sigma=0.000675 ! Fit after self-cal, rms=0.081184Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=8.316 mas, bpa=-3.584 degrees ! Estimated noise=595.983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517968 Jy ! Component: 100 - total flux cleaned = 0.00051909 Jy ! Component: 150 - total flux cleaned = 0.000536937 Jy ! Component: 200 - total flux cleaned = 0.000537121 Jy ! Total flux subtracted in 200 components = 0.000537121 Jy ! Clean residual min=-0.001726 max=0.001890 Jy/beam ! Clean residual mean=0.000005 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0959167 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 111 components and 0.0959167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081176Jy sigma=0.000674 ! Fit after self-cal, rms=0.081186Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149522 Jy ! Component: 100 - total flux cleaned = 0.000133737 Jy ! Component: 150 - total flux cleaned = 0.000148888 Jy ! Component: 200 - total flux cleaned = 0.000163258 Jy ! Total flux subtracted in 200 components = 0.000163258 Jy ! Clean residual min=-0.001724 max=0.001861 Jy/beam ! Clean residual mean=0.000005 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.09608 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 113 components and 0.09608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081181Jy sigma=0.000674 ! Fit after self-cal, rms=0.081181Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081181Jy sigma=0.000674 ! Fit after self-cal, rms=0.081304Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.604 mas, bmaj=14.16 mas, bpa=-3.157 degrees ! Estimated noise=746.741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000687827 Jy ! Component: 100 - total flux cleaned = 0.000773059 Jy ! Component: 150 - total flux cleaned = 0.000816479 Jy ! Component: 200 - total flux cleaned = 0.00085465 Jy ! Total flux subtracted in 200 components = 0.00085465 Jy ! Clean residual min=-0.002066 max=0.002309 Jy/beam ! Clean residual mean=0.000009 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0969346 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 118 components and 0.0969346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081303Jy sigma=0.000674 ! Fit after self-cal, rms=0.081304Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187912 Jy ! Component: 100 - total flux cleaned = 0.000210884 Jy ! Component: 150 - total flux cleaned = 0.000242738 Jy ! Component: 200 - total flux cleaned = 0.000280775 Jy ! Total flux subtracted in 200 components = 0.000280775 Jy ! Clean residual min=-0.002042 max=0.002294 Jy/beam ! Clean residual mean=0.000009 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0972154 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 122 components and 0.0972154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081305Jy sigma=0.000674 ! Fit after self-cal, rms=0.081305Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=8.322 mas, bpa=-3.602 degrees ! Estimated noise=596.367 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.24 x 8.322 at -3.602 degrees (North through East) ! Clean map min=-0.0017364 max=0.069566 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=7.182 mas, bpa=-4.619 degrees ! Estimated noise=909.559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0537605 Jy ! Component: 100 - total flux cleaned = 0.0682113 Jy ! Component: 150 - total flux cleaned = 0.075027 Jy ! Component: 200 - total flux cleaned = 0.0793318 Jy ! Total flux subtracted in 200 components = 0.0793318 Jy ! Clean residual min=-0.002541 max=0.002908 Jy/beam ! Clean residual mean=0.000002 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.0793318 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.0793318 Jy ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=8.322 mas, bpa=-3.602 degrees ! Estimated noise=596.367 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00484778 Jy ! Component: 100 - total flux cleaned = 0.00789917 Jy ! Component: 150 - total flux cleaned = 0.010048 Jy ! Component: 200 - total flux cleaned = 0.0116901 Jy ! Total flux subtracted in 200 components = 0.0116901 Jy ! Clean residual min=-0.002117 max=0.002075 Jy/beam ! Clean residual mean=0.000006 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.0910219 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 78 components and 0.0910219 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.604 mas, bmaj=14.16 mas, bpa=-3.157 degrees ! Estimated noise=746.741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020636 Jy ! Component: 100 - total flux cleaned = 0.00340814 Jy ! Component: 150 - total flux cleaned = 0.00432496 Jy ! Component: 200 - total flux cleaned = 0.00495198 Jy ! Total flux subtracted in 200 components = 0.00495198 Jy ! Clean residual min=-0.002147 max=0.002229 Jy/beam ! Clean residual mean=0.000009 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.0959738 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226669 Jy ! Component: 100 - total flux cleaned = 0.000327561 Jy ! Component: 150 - total flux cleaned = 0.000421024 Jy ! Component: 200 - total flux cleaned = 0.000494254 Jy ! Total flux subtracted in 200 components = 0.000494254 Jy ! Clean residual min=-0.002085 max=0.002243 Jy/beam ! Clean residual mean=0.000009 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0964681 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 111 components and 0.0964681 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=8.322 mas, bpa=-3.602 degrees ! Estimated noise=596.367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.2168e-05 Jy ! Component: 100 - total flux cleaned = 6.27426e-05 Jy ! Component: 150 - total flux cleaned = 1.93327e-05 Jy ! Component: 200 - total flux cleaned = 2.00085e-05 Jy ! Total flux subtracted in 200 components = 2.00085e-05 Jy ! Clean residual min=-0.001860 max=0.001822 Jy/beam ! Clean residual mean=0.000005 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0964881 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.0964881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081319Jy sigma=0.000674 ! Fit after self-cal, rms=0.081306Jy sigma=0.000674 wmodel J2345-0717_S_2017_07_09_pus_map.mod ! Writing 127 model components to file: J2345-0717_S_2017_07_09_pus_map.mod wobs J2345-0717_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J2345-0717_S_2017_07_09_pus_uvs.fits wwins J2345-0717_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J2345-0717_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109267 Jy ! Component: 100 - total flux cleaned = -1.66519e-05 Jy ! Component: 150 - total flux cleaned = 1.24723e-05 Jy ! Component: 200 - total flux cleaned = 6.82492e-05 Jy ! Component: 250 - total flux cleaned = 0.000148586 Jy ! Component: 300 - total flux cleaned = 0.000122727 Jy ! Component: 350 - total flux cleaned = 0.000174084 Jy ! Component: 400 - total flux cleaned = 0.000321361 Jy ! Component: 450 - total flux cleaned = 0.000440557 Jy ! Component: 500 - total flux cleaned = 0.00055716 Jy ! Component: 550 - total flux cleaned = 0.000670919 Jy ! Component: 600 - total flux cleaned = 0.000804664 Jy ! Component: 650 - total flux cleaned = 0.00093553 Jy ! Component: 700 - total flux cleaned = 0.000999818 Jy ! Component: 750 - total flux cleaned = 0.00110472 Jy ! Component: 800 - total flux cleaned = 0.00122829 Jy ! Component: 850 - total flux cleaned = 0.00130916 Jy ! Component: 900 - total flux cleaned = 0.00144822 Jy ! Component: 950 - total flux cleaned = 0.00158441 Jy ! Component: 1000 - total flux cleaned = 0.00168018 Jy ! Component: 1050 - total flux cleaned = 0.00179345 Jy ! Component: 1100 - total flux cleaned = 0.00179364 Jy ! Component: 1150 - total flux cleaned = 0.00186742 Jy ! Component: 1200 - total flux cleaned = 0.00194002 Jy ! Component: 1250 - total flux cleaned = 0.00202965 Jy ! Component: 1300 - total flux cleaned = 0.00213515 Jy ! Component: 1350 - total flux cleaned = 0.00218726 Jy ! Component: 1400 - total flux cleaned = 0.00232407 Jy ! Component: 1450 - total flux cleaned = 0.00244217 Jy ! Component: 1500 - total flux cleaned = 0.00252549 Jy ! Component: 1550 - total flux cleaned = 0.00255859 Jy ! Component: 1600 - total flux cleaned = 0.00270523 Jy ! Component: 1650 - total flux cleaned = 0.00278585 Jy ! Component: 1700 - total flux cleaned = 0.00284922 Jy ! Component: 1750 - total flux cleaned = 0.00299076 Jy ! Component: 1800 - total flux cleaned = 0.00292838 Jy ! Component: 1850 - total flux cleaned = 0.00305144 Jy ! Component: 1900 - total flux cleaned = 0.00306652 Jy ! Component: 1950 - total flux cleaned = 0.00317175 Jy ! Component: 2000 - total flux cleaned = 0.00318645 Jy ! Component: 2050 - total flux cleaned = 0.00323068 Jy ! Component: 2100 - total flux cleaned = 0.00330352 Jy ! Component: 2150 - total flux cleaned = 0.00338973 Jy ! Component: 2200 - total flux cleaned = 0.00343234 Jy ! Component: 2250 - total flux cleaned = 0.00348874 Jy ! Component: 2300 - total flux cleaned = 0.00347478 Jy ! Component: 2350 - total flux cleaned = 0.00350257 Jy ! Component: 2400 - total flux cleaned = 0.00354398 Jy ! Component: 2450 - total flux cleaned = 0.00359846 Jy ! Component: 2500 - total flux cleaned = 0.00366582 Jy ! Component: 2550 - total flux cleaned = 0.0037059 Jy ! Component: 2600 - total flux cleaned = 0.00375867 Jy ! Component: 2650 - total flux cleaned = 0.00381123 Jy ! Component: 2700 - total flux cleaned = 0.00383722 Jy ! Component: 2750 - total flux cleaned = 0.00390185 Jy ! Component: 2800 - total flux cleaned = 0.00394019 Jy ! Component: 2850 - total flux cleaned = 0.00394021 Jy ! Component: 2900 - total flux cleaned = 0.00400302 Jy ! Component: 2950 - total flux cleaned = 0.00406544 Jy ! Component: 3000 - total flux cleaned = 0.00411499 Jy ! Component: 3050 - total flux cleaned = 0.00415165 Jy ! Component: 3100 - total flux cleaned = 0.00418805 Jy ! Component: 3150 - total flux cleaned = 0.00426064 Jy ! Component: 3200 - total flux cleaned = 0.00429663 Jy ! Component: 3250 - total flux cleaned = 0.0043322 Jy ! Component: 3300 - total flux cleaned = 0.00439133 Jy ! Component: 3350 - total flux cleaned = 0.0043796 Jy ! Component: 3400 - total flux cleaned = 0.00443782 Jy ! Component: 3450 - total flux cleaned = 0.0044954 Jy ! Component: 3500 - total flux cleaned = 0.00454127 Jy ! Component: 3550 - total flux cleaned = 0.00460956 Jy ! Component: 3600 - total flux cleaned = 0.00463218 Jy ! Component: 3650 - total flux cleaned = 0.00471065 Jy ! Component: 3700 - total flux cleaned = 0.00475513 Jy ! Component: 3750 - total flux cleaned = 0.00483258 Jy ! Component: 3800 - total flux cleaned = 0.00488762 Jy ! Component: 3850 - total flux cleaned = 0.004975 Jy ! Component: 3900 - total flux cleaned = 0.00500759 Jy ! Component: 3950 - total flux cleaned = 0.00507225 Jy ! Component: 4000 - total flux cleaned = 0.00510432 Jy ! Component: 4050 - total flux cleaned = 0.0051789 Jy ! Total flux subtracted in 4096 components = 0.00524236 Jy ! Clean residual min=-0.000650 max=0.000674 Jy/beam ! Clean residual mean=0.000002 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.10173 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 407 components and 0.10173 Jy ![Exited script file: muppet] wmap "J2345-0717_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.24 x 8.322 at -3.602 degrees (North through East) ! Clean map min=-0.0012368 max=0.070553 Jy/beam ! Writing clean map to FITS file: J2345-0717_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0705533 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200799 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.853817 0.853817 1.70763 3.41527 6.83054 13.6611 27.3222 54.6443 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.24 x 8.322 at -3.602 degrees (North through East) ! Clean map min=-0.0012368 max=0.070553 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2345-0717_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:59:23 2019