! Started logfile: J2343-1351_S_2017_10_09_pus_uvs.log on Sun May 12 13:23:06 2019 obs J2343-1351_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2343-1351_S_2017_10_09_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.580409 visibilities/baseline/integration-bin. ! Found source: J2343-1351 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 9528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2343-1351_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 241 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 806 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.888710Jy sigma=0.007131 ! Fit after self-cal, rms=0.869479Jy sigma=0.006988 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=13.5 mas, bpa=-24.49 degrees ! Estimated noise=1815.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0995945 Jy ! Component: 100 - total flux cleaned = 0.13791 Jy ! Total flux subtracted in 100 components = 0.13791 Jy ! Clean residual min=-0.021428 max=0.032680 Jy/beam ! Clean residual mean=-0.000165 rms=0.007775 Jy/beam ! Combined flux in latest and established models = 0.13791 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.13791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134768Jy sigma=0.001018 ! Fit after self-cal, rms=0.134452Jy sigma=0.001015 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=14.98 mas, bpa=-24.1 degrees ! Estimated noise=1087.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320227 Jy ! Component: 100 - total flux cleaned = 0.052142 Jy ! Component: 150 - total flux cleaned = 0.0664093 Jy ! Component: 200 - total flux cleaned = 0.076792 Jy ! Total flux subtracted in 200 components = 0.076792 Jy ! Clean residual min=-0.023001 max=0.038083 Jy/beam ! Clean residual mean=-0.000019 rms=0.007893 Jy/beam ! Combined flux in latest and established models = 0.214702 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 69 components and 0.214702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125211Jy sigma=0.000938 ! Fit after self-cal, rms=0.124931Jy sigma=0.000936 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.98 HN 0.93 KP 1.08 ! LA 0.89 MK 1.59 NL 1.17 OV 1.00* ! PT 0.79 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.39 FD 1.03 HN 0.95 KP 1.17 ! LA 0.84 MK 0.94 NL 1.18 OV 1.00* ! PT 0.76 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.42 FD 1.05 HN 0.93 KP 0.99 ! LA 0.69 MK 0.96 NL 1.33 OV 1.00* ! PT 0.72 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.19 HN 1.15 KP 1.00* ! LA 1.00* MK 0.64 NL 1.00* OV 1.00* ! PT 0.70 ! ! ! Fit before self-cal, rms=0.124931Jy sigma=0.000936 ! Fit after self-cal, rms=0.137083Jy sigma=0.000873 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=15.98 mas, bpa=-23.53 degrees ! Estimated noise=1093.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222338 Jy ! Component: 100 - total flux cleaned = 0.0158992 Jy ! Component: 150 - total flux cleaned = 0.0107875 Jy ! Component: 200 - total flux cleaned = 0.00674753 Jy ! Total flux subtracted in 200 components = 0.00674753 Jy ! Clean residual min=-0.015527 max=0.031802 Jy/beam ! Clean residual mean=-0.000073 rms=0.005103 Jy/beam ! Combined flux in latest and established models = 0.22145 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 102 components and 0.22145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130008Jy sigma=0.000813 ! Fit after self-cal, rms=0.128719Jy sigma=0.000792 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128719Jy sigma=0.000792 ! Fit after self-cal, rms=0.136862Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=15.84 mas, bpa=-23.45 degrees ! Estimated noise=1054.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143116 Jy ! Component: 100 - total flux cleaned = 0.0161895 Jy ! Component: 150 - total flux cleaned = 0.0158923 Jy ! Component: 200 - total flux cleaned = 0.0153557 Jy ! Total flux subtracted in 200 components = 0.0153557 Jy ! Clean residual min=-0.011267 max=0.017739 Jy/beam ! Clean residual mean=-0.000047 rms=0.003704 Jy/beam ! Combined flux in latest and established models = 0.236805 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 143 components and 0.236805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133903Jy sigma=0.000749 ! Fit after self-cal, rms=0.133546Jy sigma=0.000742 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (33, 54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153747 Jy ! Component: 100 - total flux cleaned = 0.0208666 Jy ! Component: 150 - total flux cleaned = 0.0225526 Jy ! Component: 200 - total flux cleaned = 0.0223274 Jy ! Total flux subtracted in 200 components = 0.0223274 Jy ! Clean residual min=-0.010001 max=0.010232 Jy/beam ! Clean residual mean=-0.000035 rms=0.003074 Jy/beam ! Combined flux in latest and established models = 0.259133 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 216 components and 0.259133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130450Jy sigma=0.000724 ! Fit after self-cal, rms=0.130148Jy sigma=0.000722 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130148Jy sigma=0.000722 ! Fit after self-cal, rms=0.128090Jy sigma=0.000715 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=15.84 mas, bpa=-23.48 degrees ! Estimated noise=1038.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00896867 Jy ! Component: 100 - total flux cleaned = 0.0121248 Jy ! Component: 150 - total flux cleaned = 0.0129091 Jy ! Component: 200 - total flux cleaned = 0.0129318 Jy ! Total flux subtracted in 200 components = 0.0129318 Jy ! Clean residual min=-0.009256 max=0.008384 Jy/beam ! Clean residual mean=0.000004 rms=0.002530 Jy/beam ! Combined flux in latest and established models = 0.272065 Jy selfcal ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 272 components and 0.272065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126750Jy sigma=0.000708 ! Fit after self-cal, rms=0.126590Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349097 Jy ! Component: 100 - total flux cleaned = 0.00363843 Jy ! Component: 150 - total flux cleaned = 0.00336694 Jy ! Component: 200 - total flux cleaned = 0.00262483 Jy ! Total flux subtracted in 200 components = 0.00262483 Jy ! Clean residual min=-0.008653 max=0.007633 Jy/beam ! Clean residual mean=0.000002 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.27469 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 312 components and 0.27469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125912Jy sigma=0.000703 ! Fit after self-cal, rms=0.125719Jy sigma=0.000701 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125719Jy sigma=0.000701 ! Fit after self-cal, rms=0.125369Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.491 mas, bmaj=19.32 mas, bpa=-14.73 degrees ! Estimated noise=1256.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343389 Jy ! Component: 100 - total flux cleaned = 0.00248733 Jy ! Component: 150 - total flux cleaned = 0.00156175 Jy ! Component: 200 - total flux cleaned = 0.000778372 Jy ! Total flux subtracted in 200 components = 0.000778372 Jy ! Clean residual min=-0.009822 max=0.008668 Jy/beam ! Clean residual mean=0.000024 rms=0.002843 Jy/beam ! Combined flux in latest and established models = 0.275468 Jy selfcal ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 364 components and 0.275468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124778Jy sigma=0.000697 ! Fit after self-cal, rms=0.124616Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218838 Jy ! Component: 100 - total flux cleaned = 0.00315642 Jy ! Component: 150 - total flux cleaned = 0.00281834 Jy ! Component: 200 - total flux cleaned = 0.00231413 Jy ! Total flux subtracted in 200 components = 0.00231413 Jy ! Clean residual min=-0.009289 max=0.007857 Jy/beam ! Clean residual mean=0.000017 rms=0.002623 Jy/beam ! Combined flux in latest and established models = 0.277782 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 414 components and 0.277782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124288Jy sigma=0.000695 ! Fit after self-cal, rms=0.124164Jy sigma=0.000694 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=15.85 mas, bpa=-23.53 degrees ! Estimated noise=1033.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.544 x 15.85 at -23.53 degrees (North through East) ! Clean map min=-0.0077657 max=0.11542 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=13.91 mas, bpa=-23.84 degrees ! Estimated noise=1714.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0947171 Jy ! Component: 100 - total flux cleaned = 0.142296 Jy ! Component: 150 - total flux cleaned = 0.173376 Jy ! Component: 200 - total flux cleaned = 0.195346 Jy ! Total flux subtracted in 200 components = 0.195346 Jy ! Clean residual min=-0.012198 max=0.015513 Jy/beam ! Clean residual mean=-0.000080 rms=0.003980 Jy/beam ! Combined flux in latest and established models = 0.195346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.195346 Jy ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=15.85 mas, bpa=-23.53 degrees ! Estimated noise=1033.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224363 Jy ! Component: 100 - total flux cleaned = 0.0385248 Jy ! Component: 150 - total flux cleaned = 0.0490957 Jy ! Component: 200 - total flux cleaned = 0.0548295 Jy ! Total flux subtracted in 200 components = 0.0548295 Jy ! Clean residual min=-0.010908 max=0.009873 Jy/beam ! Clean residual mean=-0.000028 rms=0.003103 Jy/beam ! Combined flux in latest and established models = 0.250175 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 127 components and 0.250175 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.491 mas, bmaj=19.32 mas, bpa=-14.73 degrees ! Estimated noise=1256.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00932955 Jy ! Component: 100 - total flux cleaned = 0.0140303 Jy ! Component: 150 - total flux cleaned = 0.0178598 Jy ! Component: 200 - total flux cleaned = 0.0200374 Jy ! Total flux subtracted in 200 components = 0.0200374 Jy ! Clean residual min=-0.012275 max=0.010288 Jy/beam ! Clean residual mean=-0.000021 rms=0.003283 Jy/beam ! Combined flux in latest and established models = 0.270213 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188708 Jy ! Component: 100 - total flux cleaned = 0.00354631 Jy ! Component: 150 - total flux cleaned = 0.00502532 Jy ! Component: 200 - total flux cleaned = 0.00617915 Jy ! Total flux subtracted in 200 components = 0.00617915 Jy ! Clean residual min=-0.010681 max=0.008790 Jy/beam ! Clean residual mean=-0.000004 rms=0.002802 Jy/beam ! Combined flux in latest and established models = 0.276392 Jy ! Adding 143 model components to the UV plane model. ! The established model now contains 262 components and 0.276392 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=15.85 mas, bpa=-23.53 degrees ! Estimated noise=1033.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101311 Jy ! Component: 100 - total flux cleaned = 0.00175498 Jy ! Component: 150 - total flux cleaned = 0.0020256 Jy ! Component: 200 - total flux cleaned = 0.00227873 Jy ! Total flux subtracted in 200 components = 0.00227873 Jy ! Clean residual min=-0.007649 max=0.007113 Jy/beam ! Clean residual mean=0.000000 rms=0.001961 Jy/beam ! Combined flux in latest and established models = 0.278671 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 297 components and 0.278671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124448Jy sigma=0.000695 ! Fit after self-cal, rms=0.124150Jy sigma=0.000692 wmodel J2343-1351_S_2017_10_09_pus_map.mod ! Writing 297 model components to file: J2343-1351_S_2017_10_09_pus_map.mod wobs J2343-1351_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2343-1351_S_2017_10_09_pus_uvs.fits wwins J2343-1351_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J2343-1351_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.06258e-05 Jy ! Component: 100 - total flux cleaned = -0.00113145 Jy ! Component: 150 - total flux cleaned = -0.00180762 Jy ! Component: 200 - total flux cleaned = -0.00190293 Jy ! Component: 250 - total flux cleaned = -0.00182294 Jy ! Component: 300 - total flux cleaned = -0.00134764 Jy ! Component: 350 - total flux cleaned = -0.000969945 Jy ! Component: 400 - total flux cleaned = -0.000609314 Jy ! Component: 450 - total flux cleaned = -0.000125751 Jy ! Component: 500 - total flux cleaned = 0.000464898 Jy ! Component: 550 - total flux cleaned = 0.000779842 Jy ! Component: 600 - total flux cleaned = 0.0010846 Jy ! Component: 650 - total flux cleaned = 0.00126026 Jy ! Component: 700 - total flux cleaned = 0.00148503 Jy ! Component: 750 - total flux cleaned = 0.00175723 Jy ! Component: 800 - total flux cleaned = 0.00202122 Jy ! Component: 850 - total flux cleaned = 0.00232736 Jy ! Component: 900 - total flux cleaned = 0.00257441 Jy ! Component: 950 - total flux cleaned = 0.00276596 Jy ! Component: 1000 - total flux cleaned = 0.00295173 Jy ! Component: 1050 - total flux cleaned = 0.00308762 Jy ! Component: 1100 - total flux cleaned = 0.00308843 Jy ! Component: 1150 - total flux cleaned = 0.00313198 Jy ! Component: 1200 - total flux cleaned = 0.00313284 Jy ! Component: 1250 - total flux cleaned = 0.00317378 Jy ! Component: 1300 - total flux cleaned = 0.00317363 Jy ! Component: 1350 - total flux cleaned = 0.00317433 Jy ! Component: 1400 - total flux cleaned = 0.00340044 Jy ! Component: 1450 - total flux cleaned = 0.00358245 Jy ! Component: 1500 - total flux cleaned = 0.00361713 Jy ! Component: 1550 - total flux cleaned = 0.00368756 Jy ! Component: 1600 - total flux cleaned = 0.00379039 Jy ! Component: 1650 - total flux cleaned = 0.00379082 Jy ! Component: 1700 - total flux cleaned = 0.0038568 Jy ! Component: 1750 - total flux cleaned = 0.00398637 Jy ! Component: 1800 - total flux cleaned = 0.00401827 Jy ! Component: 1850 - total flux cleaned = 0.00414246 Jy ! Component: 1900 - total flux cleaned = 0.00423314 Jy ! Component: 1950 - total flux cleaned = 0.0042323 Jy ! Component: 2000 - total flux cleaned = 0.00417451 Jy ! Component: 2050 - total flux cleaned = 0.00411656 Jy ! Component: 2100 - total flux cleaned = 0.00406008 Jy ! Component: 2150 - total flux cleaned = 0.00400414 Jy ! Component: 2200 - total flux cleaned = 0.00392245 Jy ! Component: 2250 - total flux cleaned = 0.00400317 Jy ! Component: 2300 - total flux cleaned = 0.00395003 Jy ! Component: 2350 - total flux cleaned = 0.00405462 Jy ! Component: 2400 - total flux cleaned = 0.00413229 Jy ! Component: 2450 - total flux cleaned = 0.0041577 Jy ! Component: 2500 - total flux cleaned = 0.00428308 Jy ! Component: 2550 - total flux cleaned = 0.00428299 Jy ! Component: 2600 - total flux cleaned = 0.0043811 Jy ! Component: 2650 - total flux cleaned = 0.00445392 Jy ! Component: 2700 - total flux cleaned = 0.00450225 Jy ! Component: 2750 - total flux cleaned = 0.00454949 Jy ! Component: 2800 - total flux cleaned = 0.00461979 Jy ! Component: 2850 - total flux cleaned = 0.00468884 Jy ! Component: 2900 - total flux cleaned = 0.00478032 Jy ! Component: 2950 - total flux cleaned = 0.00482585 Jy ! Component: 3000 - total flux cleaned = 0.00493791 Jy ! Component: 3050 - total flux cleaned = 0.00496011 Jy ! Component: 3100 - total flux cleaned = 0.00509175 Jy ! Component: 3150 - total flux cleaned = 0.00522223 Jy ! Component: 3200 - total flux cleaned = 0.00533015 Jy ! Component: 3250 - total flux cleaned = 0.00541568 Jy ! Component: 3300 - total flux cleaned = 0.00554293 Jy ! Component: 3350 - total flux cleaned = 0.00566926 Jy ! Component: 3400 - total flux cleaned = 0.00581554 Jy ! Component: 3450 - total flux cleaned = 0.00589862 Jy ! Component: 3500 - total flux cleaned = 0.0060428 Jy ! Component: 3550 - total flux cleaned = 0.00620636 Jy ! Component: 3600 - total flux cleaned = 0.00632803 Jy ! Component: 3650 - total flux cleaned = 0.00642888 Jy ! Component: 3700 - total flux cleaned = 0.00660928 Jy ! Component: 3750 - total flux cleaned = 0.00668895 Jy ! Component: 3800 - total flux cleaned = 0.00680743 Jy ! Component: 3850 - total flux cleaned = 0.00690577 Jy ! Component: 3900 - total flux cleaned = 0.00696428 Jy ! Component: 3950 - total flux cleaned = 0.00708086 Jy ! Component: 4000 - total flux cleaned = 0.00719674 Jy ! Component: 4050 - total flux cleaned = 0.00731206 Jy ! Total flux subtracted in 4096 components = 0.00740775 Jy ! Clean residual min=-0.001167 max=0.001090 Jy/beam ! Clean residual mean=0.000004 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.286078 Jy keep ! Adding 362 model components to the UV plane model. ! The established model now contains 656 components and 0.286078 Jy ![Exited script file: muppet] wmap "J2343-1351_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.544 x 15.85 at -23.53 degrees (North through East) ! Clean map min=-0.0061788 max=0.11906 Jy/beam ! Writing clean map to FITS file: J2343-1351_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11906 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000380875 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.959708 0.959708 1.91942 3.83883 7.67767 15.3553 30.7107 61.4213 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.119 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.544 x 15.85 at -23.53 degrees (North through East) ! Clean map min=-0.0061788 max=0.11906 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2343-1351_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:23:11 2019