! Started logfile: J2343+7003_S_2017_02_19_pus_uvs.log on Sat May 4 19:02:22 2019 obs J2343+7003_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2343+7003_S_2017_02_19_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.718056 visibilities/baseline/integration-bin. ! Found source: J2343+7003 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 18612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2343+7003_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 226 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 627 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918917Jy sigma=0.007404 ! Fit after self-cal, rms=0.908255Jy sigma=0.007322 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=3.595 mas, bpa=50.62 degrees ! Estimated noise=1213.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0705976 Jy ! Component: 100 - total flux cleaned = 0.0923597 Jy ! Total flux subtracted in 100 components = 0.0923597 Jy ! Clean residual min=-0.004729 max=0.008821 Jy/beam ! Clean residual mean=0.000002 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.0923597 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0923597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090548Jy sigma=0.000685 ! Fit after self-cal, rms=0.090377Jy sigma=0.000684 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101499 Jy ! Component: 100 - total flux cleaned = 0.0153819 Jy ! Total flux subtracted in 100 components = 0.0153819 Jy ! Clean residual min=-0.004496 max=0.004480 Jy/beam ! Clean residual mean=-0.000002 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.107742 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.107742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088740Jy sigma=0.000672 ! Fit after self-cal, rms=0.088681Jy sigma=0.000672 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=4.261 mas, bpa=54.6 degrees ! Estimated noise=707.356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649939 Jy ! Component: 100 - total flux cleaned = 0.0100943 Jy ! Component: 150 - total flux cleaned = 0.0124782 Jy ! Component: 200 - total flux cleaned = 0.0141764 Jy ! Total flux subtracted in 200 components = 0.0141764 Jy ! Clean residual min=-0.002731 max=0.002379 Jy/beam ! Clean residual mean=0.000002 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.121918 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 50 components and 0.121918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088100Jy sigma=0.000668 ! Fit after self-cal, rms=0.088015Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 HN 1.02 KP 1.07 ! LA 1.01 MK 1.01 NL 0.91 OV 1.00 ! PT 1.00* SC 0.91 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.06 KP 1.01 ! LA 0.97 MK 1.00 NL 0.99 OV 1.06 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.04 HN 1.02 KP 0.90 ! LA 0.81 MK 1.02 NL 1.17 OV 0.98 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.05 HN 0.96 KP 1.00* ! LA 0.86 MK 1.27 NL 1.00* OV 0.99 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.088015Jy sigma=0.000668 ! Fit after self-cal, rms=0.085541Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=4.292 mas, bpa=53.97 degrees ! Estimated noise=705.119 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000833804 Jy ! Component: 100 - total flux cleaned = 0.00112973 Jy ! Component: 150 - total flux cleaned = 0.00103537 Jy ! Component: 200 - total flux cleaned = 0.000978919 Jy ! Total flux subtracted in 200 components = 0.000978919 Jy ! Clean residual min=-0.002140 max=0.002150 Jy/beam ! Clean residual mean=0.000001 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.122897 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.122897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085503Jy sigma=0.000663 ! Fit after self-cal, rms=0.085460Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085460Jy sigma=0.000663 ! Fit after self-cal, rms=0.085420Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.68 mas, bmaj=4.298 mas, bpa=55.74 degrees ! Estimated noise=704.026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863917 Jy ! Component: 100 - total flux cleaned = 0.00078762 Jy ! Component: 150 - total flux cleaned = 0.000766883 Jy ! Component: 200 - total flux cleaned = 0.000729693 Jy ! Total flux subtracted in 200 components = 0.000729693 Jy ! Clean residual min=-0.001802 max=0.001823 Jy/beam ! Clean residual mean=0.000000 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.123627 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.123627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085404Jy sigma=0.000661 ! Fit after self-cal, rms=0.085423Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178229 Jy ! Component: 100 - total flux cleaned = 0.000162237 Jy ! Component: 150 - total flux cleaned = 0.000131235 Jy ! Component: 200 - total flux cleaned = 0.000103465 Jy ! Total flux subtracted in 200 components = 0.000103465 Jy ! Clean residual min=-0.001816 max=0.001813 Jy/beam ! Clean residual mean=0.000000 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.12373 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.12373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085414Jy sigma=0.000661 ! Fit after self-cal, rms=0.085413Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085413Jy sigma=0.000661 ! Fit after self-cal, rms=0.085255Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=4.301 mas, bpa=56.46 degrees ! Estimated noise=702.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507216 Jy ! Component: 100 - total flux cleaned = 0.000524991 Jy ! Component: 150 - total flux cleaned = 0.000497719 Jy ! Component: 200 - total flux cleaned = 0.000461124 Jy ! Total flux subtracted in 200 components = 0.000461124 Jy ! Clean residual min=-0.001786 max=0.001745 Jy/beam ! Clean residual mean=0.000000 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.124191 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 95 components and 0.124191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085248Jy sigma=0.000661 ! Fit after self-cal, rms=0.085248Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.18528e-05 Jy ! Component: 100 - total flux cleaned = 5.44549e-05 Jy ! Component: 150 - total flux cleaned = 2.11618e-05 Jy ! Component: 200 - total flux cleaned = -9.50707e-06 Jy ! Total flux subtracted in 200 components = -9.50707e-06 Jy ! Clean residual min=-0.001799 max=0.001709 Jy/beam ! Clean residual mean=0.000000 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.124182 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.124182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085244Jy sigma=0.000661 ! Fit after self-cal, rms=0.085243Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085243Jy sigma=0.000661 ! Fit after self-cal, rms=0.085119Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.329 mas, bmaj=8.881 mas, bpa=55.51 degrees ! Estimated noise=945.096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463444 Jy ! Component: 100 - total flux cleaned = 0.000554416 Jy ! Component: 150 - total flux cleaned = 0.000603531 Jy ! Component: 200 - total flux cleaned = 0.000615274 Jy ! Total flux subtracted in 200 components = 0.000615274 Jy ! Clean residual min=-0.002238 max=0.001935 Jy/beam ! Clean residual mean=0.000001 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.124797 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 114 components and 0.124797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085118Jy sigma=0.000661 ! Fit after self-cal, rms=0.085119Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.70082e-05 Jy ! Component: 100 - total flux cleaned = 9.85618e-05 Jy ! Component: 150 - total flux cleaned = 0.000110631 Jy ! Component: 200 - total flux cleaned = 0.0001108 Jy ! Total flux subtracted in 200 components = 0.0001108 Jy ! Clean residual min=-0.002233 max=0.001936 Jy/beam ! Clean residual mean=0.000001 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.124908 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 123 components and 0.124908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085119Jy sigma=0.000661 ! Fit after self-cal, rms=0.085118Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.655 mas, bmaj=4.303 mas, bpa=56.86 degrees ! Estimated noise=701.412 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.655 x 4.303 at 56.86 degrees (North through East) ! Clean map min=-0.0017395 max=0.089313 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=3.63 mas, bpa=53.68 degrees ! Estimated noise=1202.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0702451 Jy ! Component: 100 - total flux cleaned = 0.093533 Jy ! Component: 150 - total flux cleaned = 0.103878 Jy ! Component: 200 - total flux cleaned = 0.109651 Jy ! Total flux subtracted in 200 components = 0.109651 Jy ! Clean residual min=-0.003512 max=0.003704 Jy/beam ! Clean residual mean=-0.000002 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.109651 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.109651 Jy ! Inverting map and beam ! Estimated beam: bmin=3.655 mas, bmaj=4.303 mas, bpa=56.86 degrees ! Estimated noise=701.412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00564371 Jy ! Component: 100 - total flux cleaned = 0.008782 Jy ! Component: 150 - total flux cleaned = 0.0108741 Jy ! Component: 200 - total flux cleaned = 0.0124 Jy ! Total flux subtracted in 200 components = 0.0124 Jy ! Clean residual min=-0.001998 max=0.001717 Jy/beam ! Clean residual mean=0.000000 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.122051 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 57 components and 0.122051 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.329 mas, bmaj=8.881 mas, bpa=55.51 degrees ! Estimated noise=945.096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152869 Jy ! Component: 100 - total flux cleaned = 0.00233504 Jy ! Component: 150 - total flux cleaned = 0.0027639 Jy ! Component: 200 - total flux cleaned = 0.00280709 Jy ! Total flux subtracted in 200 components = 0.00280709 Jy ! Clean residual min=-0.002341 max=0.001922 Jy/beam ! Clean residual mean=0.000001 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.124858 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18777e-05 Jy ! Component: 100 - total flux cleaned = 2.25529e-05 Jy ! Component: 150 - total flux cleaned = 3.23798e-05 Jy ! Component: 200 - total flux cleaned = 4.12165e-05 Jy ! Total flux subtracted in 200 components = 4.12165e-05 Jy ! Clean residual min=-0.002314 max=0.001928 Jy/beam ! Clean residual mean=0.000001 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.1249 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 93 components and 0.1249 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.655 mas, bmaj=4.303 mas, bpa=56.86 degrees ! Estimated noise=701.412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235913 Jy ! Component: 100 - total flux cleaned = -0.000309744 Jy ! Component: 150 - total flux cleaned = -0.000354831 Jy ! Component: 200 - total flux cleaned = -0.000355133 Jy ! Total flux subtracted in 200 components = -0.000355133 Jy ! Clean residual min=-0.001828 max=0.001670 Jy/beam ! Clean residual mean=0.000000 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.124545 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 106 components and 0.124545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085125Jy sigma=0.000661 ! Fit after self-cal, rms=0.085122Jy sigma=0.000661 wmodel J2343+7003_S_2017_02_19_pus_map.mod ! Writing 106 model components to file: J2343+7003_S_2017_02_19_pus_map.mod wobs J2343+7003_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2343+7003_S_2017_02_19_pus_uvs.fits wwins J2343+7003_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J2343+7003_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000666185 Jy ! Component: 100 - total flux cleaned = -0.00093742 Jy ! Component: 150 - total flux cleaned = -0.00122403 Jy ! Component: 200 - total flux cleaned = -0.00136143 Jy ! Component: 250 - total flux cleaned = -0.00141452 Jy ! Component: 300 - total flux cleaned = -0.00144006 Jy ! Component: 350 - total flux cleaned = -0.00146496 Jy ! Component: 400 - total flux cleaned = -0.00144046 Jy ! Component: 450 - total flux cleaned = -0.00139286 Jy ! Component: 500 - total flux cleaned = -0.00134644 Jy ! Component: 550 - total flux cleaned = -0.00127797 Jy ! Component: 600 - total flux cleaned = -0.00125523 Jy ! Component: 650 - total flux cleaned = -0.00107973 Jy ! Component: 700 - total flux cleaned = -0.000993709 Jy ! Component: 750 - total flux cleaned = -0.00101454 Jy ! Component: 800 - total flux cleaned = -0.000931016 Jy ! Component: 850 - total flux cleaned = -0.000848985 Jy ! Component: 900 - total flux cleaned = -0.000829061 Jy ! Component: 950 - total flux cleaned = -0.000828859 Jy ! Component: 1000 - total flux cleaned = -0.00080944 Jy ! Component: 1050 - total flux cleaned = -0.000829141 Jy ! Component: 1100 - total flux cleaned = -0.000828899 Jy ! Component: 1150 - total flux cleaned = -0.000866177 Jy ! Component: 1200 - total flux cleaned = -0.000847728 Jy ! Component: 1250 - total flux cleaned = -0.000902765 Jy ! Component: 1300 - total flux cleaned = -0.000920936 Jy ! Component: 1350 - total flux cleaned = -0.000938808 Jy ! Component: 1400 - total flux cleaned = -0.0010093 Jy ! Component: 1450 - total flux cleaned = -0.00104435 Jy ! Component: 1500 - total flux cleaned = -0.00106145 Jy ! Component: 1550 - total flux cleaned = -0.00109566 Jy ! Component: 1600 - total flux cleaned = -0.00116331 Jy ! Component: 1650 - total flux cleaned = -0.00121349 Jy ! Component: 1700 - total flux cleaned = -0.00124649 Jy ! Component: 1750 - total flux cleaned = -0.00126294 Jy ! Component: 1800 - total flux cleaned = -0.00134426 Jy ! Component: 1850 - total flux cleaned = -0.00136037 Jy ! Component: 1900 - total flux cleaned = -0.00143992 Jy ! Component: 1950 - total flux cleaned = -0.00139291 Jy ! Component: 2000 - total flux cleaned = -0.00142401 Jy ! Component: 2050 - total flux cleaned = -0.00142406 Jy ! Component: 2100 - total flux cleaned = -0.00139366 Jy ! Component: 2150 - total flux cleaned = -0.00139379 Jy ! Component: 2200 - total flux cleaned = -0.0014238 Jy ! Component: 2250 - total flux cleaned = -0.00137931 Jy ! Component: 2300 - total flux cleaned = -0.0013794 Jy ! Component: 2350 - total flux cleaned = -0.00140891 Jy ! Component: 2400 - total flux cleaned = -0.00143778 Jy ! Component: 2450 - total flux cleaned = -0.00145206 Jy ! Component: 2500 - total flux cleaned = -0.00143767 Jy ! Component: 2550 - total flux cleaned = -0.00143776 Jy ! Component: 2600 - total flux cleaned = -0.00143776 Jy ! Component: 2650 - total flux cleaned = -0.00141 Jy ! Component: 2700 - total flux cleaned = -0.00146553 Jy ! Component: 2750 - total flux cleaned = -0.00145172 Jy ! Component: 2800 - total flux cleaned = -0.00145161 Jy ! Component: 2850 - total flux cleaned = -0.00146516 Jy ! Component: 2900 - total flux cleaned = -0.00145166 Jy ! Component: 2950 - total flux cleaned = -0.00143812 Jy ! Component: 3000 - total flux cleaned = -0.00139837 Jy ! Component: 3050 - total flux cleaned = -0.00141166 Jy ! Component: 3100 - total flux cleaned = -0.00139857 Jy ! Component: 3150 - total flux cleaned = -0.00141164 Jy ! Component: 3200 - total flux cleaned = -0.00141167 Jy ! Component: 3250 - total flux cleaned = -0.00141174 Jy ! Component: 3300 - total flux cleaned = -0.00138632 Jy ! Component: 3350 - total flux cleaned = -0.00141161 Jy ! Component: 3400 - total flux cleaned = -0.00139897 Jy ! Component: 3450 - total flux cleaned = -0.00141159 Jy ! Component: 3500 - total flux cleaned = -0.00143653 Jy ! Component: 3550 - total flux cleaned = -0.00142424 Jy ! Component: 3600 - total flux cleaned = -0.00138743 Jy ! Component: 3650 - total flux cleaned = -0.00143629 Jy ! Component: 3700 - total flux cleaned = -0.00143629 Jy ! Component: 3750 - total flux cleaned = -0.00147248 Jy ! Component: 3800 - total flux cleaned = -0.00148429 Jy ! Component: 3850 - total flux cleaned = -0.00150792 Jy ! Component: 3900 - total flux cleaned = -0.00151973 Jy ! Component: 3950 - total flux cleaned = -0.00153145 Jy ! Component: 4000 - total flux cleaned = -0.001508 Jy ! Component: 4050 - total flux cleaned = -0.00156602 Jy ! Total flux subtracted in 4096 components = -0.0015197 Jy ! Clean residual min=-0.000644 max=0.000617 Jy/beam ! Clean residual mean=0.000000 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.123025 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 372 components and 0.123025 Jy ![Exited script file: muppet] wmap "J2343+7003_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.655 x 4.303 at 56.86 degrees (North through East) ! Clean map min=-0.0014146 max=0.088947 Jy/beam ! Writing clean map to FITS file: J2343+7003_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0889469 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020402 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.688118 0.688118 1.37624 2.75247 5.50494 11.0099 22.0198 44.0396 88.0791 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.655 x 4.303 at 56.86 degrees (North through East) ! Clean map min=-0.0014146 max=0.088947 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2343+7003_S_2017_02_19_pus_uvs.log closed on Sat May 4 19:02:28 2019