! Started logfile: J2343+1543_S_2017_05_01_pus_uvs.log on Wed May 1 18:45:41 2019 obs J2343+1543_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J2343+1543_S_2017_05_01_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.940912 visibilities/baseline/integration-bin. ! Found source: J2343+1543 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 29300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2343+1543_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 744 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.907837Jy sigma=0.034724 ! Fit after self-cal, rms=0.898905Jy sigma=0.034687 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.877 mas, bpa=-7.073 degrees ! Estimated noise=533.369 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542807 Jy ! Component: 100 - total flux cleaned = 0.0596477 Jy ! Total flux subtracted in 100 components = 0.0596477 Jy ! Clean residual min=-0.021823 max=0.021135 Jy/beam ! Clean residual mean=-0.000228 rms=0.007692 Jy/beam ! Combined flux in latest and established models = 0.0596477 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0596477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102271Jy sigma=0.002153 ! Fit after self-cal, rms=0.102222Jy sigma=0.002150 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=8.206 mas, bpa=-3.921 degrees ! Estimated noise=388.389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101627 Jy ! Component: 100 - total flux cleaned = 0.00968713 Jy ! Component: 150 - total flux cleaned = 0.00929441 Jy ! Component: 200 - total flux cleaned = 0.00940173 Jy ! Total flux subtracted in 200 components = 0.00940173 Jy ! Clean residual min=-0.022353 max=0.019989 Jy/beam ! Clean residual mean=-0.000178 rms=0.006692 Jy/beam ! Combined flux in latest and established models = 0.0690494 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.0690494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097926Jy sigma=0.002472 ! Fit after self-cal, rms=0.097910Jy sigma=0.002472 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.76 HN 0.81 KP 0.81 ! LA 0.79 MK 0.85 NL 0.77 OV 0.82 ! PT 0.81 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.78 HN 0.86 KP 0.77 ! LA 0.76 MK 0.84 NL 0.82 OV 0.85 ! PT 0.77 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.82 HN 0.80 KP 0.79 ! LA 0.81 MK 0.88 NL 0.86 OV 0.80 ! PT 0.76 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.90 HN 0.97 KP 1.00* ! LA 29.33 MK 0.91 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.097910Jy sigma=0.002472 ! Fit after self-cal, rms=0.792619Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=7.805 mas, bpa=-2.496 degrees ! Estimated noise=388.397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220837 Jy ! Component: 100 - total flux cleaned = 0.00331586 Jy ! Component: 150 - total flux cleaned = 0.00378724 Jy ! Component: 200 - total flux cleaned = 0.00384395 Jy ! Total flux subtracted in 200 components = 0.00384395 Jy ! Clean residual min=-0.001551 max=0.001693 Jy/beam ! Clean residual mean=-0.000017 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0728934 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.0728934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.792458Jy sigma=0.000682 ! Fit after self-cal, rms=0.792953Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.792953Jy sigma=0.000673 ! Fit after self-cal, rms=0.684147Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=7.798 mas, bpa=-2.133 degrees ! Estimated noise=389.913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118093 Jy ! Component: 100 - total flux cleaned = 0.00171417 Jy ! Component: 150 - total flux cleaned = 0.00175402 Jy ! Component: 200 - total flux cleaned = 0.00174401 Jy ! Total flux subtracted in 200 components = 0.00174401 Jy ! Clean residual min=-0.001287 max=0.001313 Jy/beam ! Clean residual mean=-0.000010 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.0746374 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.0746374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.684084Jy sigma=0.000666 ! Fit after self-cal, rms=0.684085Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.67576e-05 Jy ! Component: 100 - total flux cleaned = 1.81354e-05 Jy ! Component: 150 - total flux cleaned = 1.82684e-05 Jy ! Component: 200 - total flux cleaned = 1.79091e-05 Jy ! Total flux subtracted in 200 components = 1.79091e-05 Jy ! Clean residual min=-0.001304 max=0.001305 Jy/beam ! Clean residual mean=-0.000010 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.0746553 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.0746553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.684079Jy sigma=0.000665 ! Fit after self-cal, rms=0.684080Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.684080Jy sigma=0.000665 ! Fit after self-cal, rms=0.078540Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=7.777 mas, bpa=-1.847 degrees ! Estimated noise=392.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000758879 Jy ! Component: 100 - total flux cleaned = 0.000977299 Jy ! Component: 150 - total flux cleaned = 0.000959743 Jy ! Component: 200 - total flux cleaned = 0.00094426 Jy ! Total flux subtracted in 200 components = 0.00094426 Jy ! Clean residual min=-0.001132 max=0.001155 Jy/beam ! Clean residual mean=-0.000006 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.0755996 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0755996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078518Jy sigma=0.000664 ! Fit after self-cal, rms=0.078480Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105669 Jy ! Component: 100 - total flux cleaned = 0.00117659 Jy ! Component: 150 - total flux cleaned = 0.0011573 Jy ! Component: 200 - total flux cleaned = 0.00112298 Jy ! Total flux subtracted in 200 components = 0.00112298 Jy ! Clean residual min=-0.001107 max=0.000893 Jy/beam ! Clean residual mean=-0.000005 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.0767225 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.0767226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078440Jy sigma=0.000663 ! Fit after self-cal, rms=0.078440Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078440Jy sigma=0.000663 ! Fit after self-cal, rms=0.078255Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.654 mas, bmaj=10.87 mas, bpa=-3.056 degrees ! Estimated noise=455.696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728657 Jy ! Component: 100 - total flux cleaned = 0.00115557 Jy ! Component: 150 - total flux cleaned = 0.00124348 Jy ! Component: 200 - total flux cleaned = 0.00131435 Jy ! Total flux subtracted in 200 components = 0.00131435 Jy ! Clean residual min=-0.001187 max=0.001083 Jy/beam ! Clean residual mean=-0.000010 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.0780369 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.0780369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078234Jy sigma=0.000663 ! Fit after self-cal, rms=0.078231Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187305 Jy ! Component: 100 - total flux cleaned = 0.000178755 Jy ! Component: 150 - total flux cleaned = 0.000186445 Jy ! Component: 200 - total flux cleaned = 0.000199419 Jy ! Total flux subtracted in 200 components = 0.000199419 Jy ! Clean residual min=-0.001156 max=0.001056 Jy/beam ! Clean residual mean=-0.000009 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.0782363 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 104 components and 0.0782364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078224Jy sigma=0.000663 ! Fit after self-cal, rms=0.078225Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=7.757 mas, bpa=-1.628 degrees ! Estimated noise=394.106 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 7.757 at -1.628 degrees (North through East) ! Clean map min=-0.0010963 max=0.077833 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=7.029 mas, bpa=-3.906 degrees ! Estimated noise=588.842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060678 Jy ! Component: 100 - total flux cleaned = 0.0739139 Jy ! Component: 150 - total flux cleaned = 0.0767595 Jy ! Component: 200 - total flux cleaned = 0.0775877 Jy ! Total flux subtracted in 200 components = 0.0775877 Jy ! Clean residual min=-0.001875 max=0.001795 Jy/beam ! Clean residual mean=-0.000008 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0775877 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0775877 Jy ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=7.757 mas, bpa=-1.628 degrees ! Estimated noise=394.106 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627228 Jy ! Component: 100 - total flux cleaned = 0.000869395 Jy ! Component: 150 - total flux cleaned = 0.00100107 Jy ! Component: 200 - total flux cleaned = 0.00100129 Jy ! Total flux subtracted in 200 components = 0.00100129 Jy ! Clean residual min=-0.001180 max=0.000969 Jy/beam ! Clean residual mean=-0.000005 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.078589 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.078589 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.654 mas, bmaj=10.87 mas, bpa=-3.056 degrees ! Estimated noise=455.696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.73417e-06 Jy ! Component: 100 - total flux cleaned = -0.000119182 Jy ! Component: 150 - total flux cleaned = -0.000189037 Jy ! Component: 200 - total flux cleaned = -0.000199011 Jy ! Total flux subtracted in 200 components = -0.000199011 Jy ! Clean residual min=-0.001148 max=0.001065 Jy/beam ! Clean residual mean=-0.000009 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.07839 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.67714e-06 Jy ! Component: 100 - total flux cleaned = 1.10673e-06 Jy ! Component: 150 - total flux cleaned = 1.31877e-06 Jy ! Component: 200 - total flux cleaned = 1.4821e-06 Jy ! Total flux subtracted in 200 components = 1.4821e-06 Jy ! Clean residual min=-0.001138 max=0.001057 Jy/beam ! Clean residual mean=-0.000009 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.0783915 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 70 components and 0.0783915 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=7.757 mas, bpa=-1.628 degrees ! Estimated noise=394.106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011173 Jy ! Component: 100 - total flux cleaned = 7.86544e-05 Jy ! Component: 150 - total flux cleaned = 4.85855e-05 Jy ! Component: 200 - total flux cleaned = -4.62785e-06 Jy ! Total flux subtracted in 200 components = -4.62785e-06 Jy ! Clean residual min=-0.001123 max=0.000933 Jy/beam ! Clean residual mean=-0.000005 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.0783869 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.0783869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078221Jy sigma=0.000663 ! Fit after self-cal, rms=0.078231Jy sigma=0.000663 wmodel J2343+1543_S_2017_05_01_pus_map.mod ! Writing 81 model components to file: J2343+1543_S_2017_05_01_pus_map.mod wobs J2343+1543_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J2343+1543_S_2017_05_01_pus_uvs.fits wwins J2343+1543_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J2343+1543_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000500179 Jy ! Component: 100 - total flux cleaned = -0.000846639 Jy ! Component: 150 - total flux cleaned = -0.00105307 Jy ! Component: 200 - total flux cleaned = -0.00120113 Jy ! Component: 250 - total flux cleaned = -0.00132728 Jy ! Component: 300 - total flux cleaned = -0.0013884 Jy ! Component: 350 - total flux cleaned = -0.00143312 Jy ! Component: 400 - total flux cleaned = -0.0014626 Jy ! Component: 450 - total flux cleaned = -0.00156245 Jy ! Component: 500 - total flux cleaned = -0.00160389 Jy ! Component: 550 - total flux cleaned = -0.00158986 Jy ! Component: 600 - total flux cleaned = -0.00164366 Jy ! Component: 650 - total flux cleaned = -0.00161713 Jy ! Component: 700 - total flux cleaned = -0.0016304 Jy ! Component: 750 - total flux cleaned = -0.00165633 Jy ! Component: 800 - total flux cleaned = -0.00168191 Jy ! Component: 850 - total flux cleaned = -0.0017323 Jy ! Component: 900 - total flux cleaned = -0.00179396 Jy ! Component: 950 - total flux cleaned = -0.00179392 Jy ! Component: 1000 - total flux cleaned = -0.00180602 Jy ! Component: 1050 - total flux cleaned = -0.00179416 Jy ! Component: 1100 - total flux cleaned = -0.00186507 Jy ! Component: 1150 - total flux cleaned = -0.0018768 Jy ! Component: 1200 - total flux cleaned = -0.00187671 Jy ! Component: 1250 - total flux cleaned = -0.00188832 Jy ! Component: 1300 - total flux cleaned = -0.00189974 Jy ! Component: 1350 - total flux cleaned = -0.00198957 Jy ! Component: 1400 - total flux cleaned = -0.00204492 Jy ! Component: 1450 - total flux cleaned = -0.00205595 Jy ! Component: 1500 - total flux cleaned = -0.00211057 Jy ! Component: 1550 - total flux cleaned = -0.00217536 Jy ! Component: 1600 - total flux cleaned = -0.0021753 Jy ! Component: 1650 - total flux cleaned = -0.00222834 Jy ! Component: 1700 - total flux cleaned = -0.00229136 Jy ! Component: 1750 - total flux cleaned = -0.00229132 Jy ! Component: 1800 - total flux cleaned = -0.0023224 Jy ! Component: 1850 - total flux cleaned = -0.00235312 Jy ! Component: 1900 - total flux cleaned = -0.00243463 Jy ! Component: 1950 - total flux cleaned = -0.00247502 Jy ! Component: 2000 - total flux cleaned = -0.0024549 Jy ! Component: 2050 - total flux cleaned = -0.00248492 Jy ! Component: 2100 - total flux cleaned = -0.00253446 Jy ! Component: 2150 - total flux cleaned = -0.00258346 Jy ! Component: 2200 - total flux cleaned = -0.00262222 Jy ! Component: 2250 - total flux cleaned = -0.00263187 Jy ! Component: 2300 - total flux cleaned = -0.00267985 Jy ! Component: 2350 - total flux cleaned = -0.00270844 Jy ! Component: 2400 - total flux cleaned = -0.00275572 Jy ! Component: 2450 - total flux cleaned = -0.00276523 Jy ! Component: 2500 - total flux cleaned = -0.0028306 Jy ! Component: 2550 - total flux cleaned = -0.0028584 Jy ! Component: 2600 - total flux cleaned = -0.0028675 Jy ! Component: 2650 - total flux cleaned = -0.00292241 Jy ! Component: 2700 - total flux cleaned = -0.00294064 Jy ! Component: 2750 - total flux cleaned = -0.00299484 Jy ! Component: 2800 - total flux cleaned = -0.0030037 Jy ! Component: 2850 - total flux cleaned = -0.00303942 Jy ! Component: 2900 - total flux cleaned = -0.00306606 Jy ! Component: 2950 - total flux cleaned = -0.00306604 Jy ! Component: 3000 - total flux cleaned = -0.00306603 Jy ! Component: 3050 - total flux cleaned = -0.00310095 Jy ! Component: 3100 - total flux cleaned = -0.0031356 Jy ! Component: 3150 - total flux cleaned = -0.00318738 Jy ! Component: 3200 - total flux cleaned = -0.00318743 Jy ! Component: 3250 - total flux cleaned = -0.003247 Jy ! Component: 3300 - total flux cleaned = -0.00325547 Jy ! Component: 3350 - total flux cleaned = -0.00331438 Jy ! Component: 3400 - total flux cleaned = -0.00333116 Jy ! Component: 3450 - total flux cleaned = -0.00335617 Jy ! Component: 3500 - total flux cleaned = -0.00339766 Jy ! Component: 3550 - total flux cleaned = -0.00343889 Jy ! Component: 3600 - total flux cleaned = -0.00349637 Jy ! Component: 3650 - total flux cleaned = -0.00352092 Jy ! Component: 3700 - total flux cleaned = -0.00359393 Jy ! Component: 3750 - total flux cleaned = -0.00360204 Jy ! Component: 3800 - total flux cleaned = -0.00365818 Jy ! Component: 3850 - total flux cleaned = -0.00372208 Jy ! Component: 3900 - total flux cleaned = -0.00375385 Jy ! Component: 3950 - total flux cleaned = -0.0037934 Jy ! Component: 4000 - total flux cleaned = -0.00384862 Jy ! Component: 4050 - total flux cleaned = -0.00386433 Jy ! Total flux subtracted in 4096 components = -0.00390344 Jy ! Clean residual min=-0.000453 max=0.000426 Jy/beam ! Clean residual mean=-0.000003 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.0744834 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 375 components and 0.0744833 Jy ![Exited script file: muppet] wmap "J2343+1543_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 7.757 at -1.628 degrees (North through East) ! Clean map min=-0.00095585 max=0.077494 Jy/beam ! Writing clean map to FITS file: J2343+1543_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0774944 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146511 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.567178 0.567178 1.13436 2.26871 4.53743 9.07485 18.1497 36.2994 72.5988 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 7.757 at -1.628 degrees (North through East) ! Clean map min=-0.00095585 max=0.077494 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2343+1543_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:45:46 2019