! Started logfile: J2342-2223_S_2017_01_21_pus_uvs.log on Sun May 5 16:07:13 2019 obs J2342-2223_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2342-2223_S_2017_01_21_pus_uva.fits ! AN table 1: 233 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.492489 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2342-2223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 16524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2342-2223_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 842 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 842 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 842 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1289 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883340Jy sigma=0.005490 ! Fit after self-cal, rms=0.864792Jy sigma=0.005385 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.268 mas, bmaj=6.032 mas, bpa=-7.059 degrees ! Estimated noise=1437.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112883 Jy ! Component: 100 - total flux cleaned = 0.137498 Jy ! Total flux subtracted in 100 components = 0.137498 Jy ! Clean residual min=-0.004896 max=0.006867 Jy/beam ! Clean residual mean=0.000008 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.137498 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.137498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118987Jy sigma=0.000662 ! Fit after self-cal, rms=0.118960Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=7.096 mas, bpa=-5.88 degrees ! Estimated noise=988.288 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00626724 Jy ! Component: 100 - total flux cleaned = 0.00768103 Jy ! Component: 150 - total flux cleaned = 0.00784397 Jy ! Component: 200 - total flux cleaned = 0.0080545 Jy ! Total flux subtracted in 200 components = 0.0080545 Jy ! Clean residual min=-0.004554 max=0.004309 Jy/beam ! Clean residual mean=0.000026 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.145553 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.145553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118703Jy sigma=0.000659 ! Fit after self-cal, rms=0.118709Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.08 LA 1.04 ! MK 0.97 NL 0.97 OV 1.02 PT 0.98 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.08 LA 1.00 ! MK 0.99 NL 1.01 OV 1.05 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.13 LA 1.02 ! MK 1.03 NL 0.95 OV 0.96 PT 0.94 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.00 LA 0.97 ! MK 0.99 NL 1.00* OV 0.95 PT 0.94 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.118709Jy sigma=0.000659 ! Fit after self-cal, rms=0.120047Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.025 mas, bpa=-5.634 degrees ! Estimated noise=984.443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000603309 Jy ! Component: 100 - total flux cleaned = -0.000639241 Jy ! Component: 150 - total flux cleaned = -0.000670648 Jy ! Component: 200 - total flux cleaned = -0.00072611 Jy ! Total flux subtracted in 200 components = -0.00072611 Jy ! Clean residual min=-0.004085 max=0.003693 Jy/beam ! Clean residual mean=0.000030 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.144827 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.144827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120017Jy sigma=0.000658 ! Fit after self-cal, rms=0.120156Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120156Jy sigma=0.000657 ! Fit after self-cal, rms=0.125884Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=7.023 mas, bpa=-5.663 degrees ! Estimated noise=988.701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028003 Jy ! Component: 100 - total flux cleaned = 0.000335149 Jy ! Component: 150 - total flux cleaned = 0.000381313 Jy ! Component: 200 - total flux cleaned = 0.000421085 Jy ! Total flux subtracted in 200 components = 0.000421085 Jy ! Clean residual min=-0.002639 max=0.002442 Jy/beam ! Clean residual mean=0.000007 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.145248 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.145248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125872Jy sigma=0.000655 ! Fit after self-cal, rms=0.126035Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103652 Jy ! Component: 100 - total flux cleaned = -8.4171e-05 Jy ! Component: 150 - total flux cleaned = -6.6841e-05 Jy ! Component: 200 - total flux cleaned = -6.61387e-05 Jy ! Total flux subtracted in 200 components = -6.61387e-05 Jy ! Clean residual min=-0.002634 max=0.002432 Jy/beam ! Clean residual mean=0.000007 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.145182 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.145182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126028Jy sigma=0.000654 ! Fit after self-cal, rms=0.126032Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126032Jy sigma=0.000654 ! Fit after self-cal, rms=0.126530Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=7.023 mas, bpa=-5.639 degrees ! Estimated noise=990.074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.29792e-05 Jy ! Component: 100 - total flux cleaned = 0.000115966 Jy ! Component: 150 - total flux cleaned = 0.000115836 Jy ! Component: 200 - total flux cleaned = 0.000116167 Jy ! Total flux subtracted in 200 components = 0.000116167 Jy ! Clean residual min=-0.002477 max=0.002426 Jy/beam ! Clean residual mean=0.000005 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.145298 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.145298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126525Jy sigma=0.000654 ! Fit after self-cal, rms=0.126560Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117335 Jy ! Component: 100 - total flux cleaned = -0.000116686 Jy ! Component: 150 - total flux cleaned = -0.00010523 Jy ! Component: 200 - total flux cleaned = -0.000105221 Jy ! Total flux subtracted in 200 components = -0.000105221 Jy ! Clean residual min=-0.002501 max=0.002396 Jy/beam ! Clean residual mean=0.000005 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.145193 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.145193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126556Jy sigma=0.000654 ! Fit after self-cal, rms=0.126558Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126558Jy sigma=0.000654 ! Fit after self-cal, rms=0.126757Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.883 mas, bmaj=16.43 mas, bpa=5.589 degrees ! Estimated noise=1314.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106417 Jy ! Component: 100 - total flux cleaned = -8.39596e-05 Jy ! Component: 150 - total flux cleaned = -6.69781e-05 Jy ! Component: 200 - total flux cleaned = -5.98543e-05 Jy ! Total flux subtracted in 200 components = -5.98543e-05 Jy ! Clean residual min=-0.002722 max=0.002851 Jy/beam ! Clean residual mean=0.000011 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.145133 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 42 components and 0.145133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126759Jy sigma=0.000654 ! Fit after self-cal, rms=0.126761Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.32002e-05 Jy ! Component: 100 - total flux cleaned = -5.73726e-05 Jy ! Component: 150 - total flux cleaned = -5.11905e-05 Jy ! Component: 200 - total flux cleaned = -4.15051e-05 Jy ! Total flux subtracted in 200 components = -4.15051e-05 Jy ! Clean residual min=-0.002752 max=0.002845 Jy/beam ! Clean residual mean=0.000011 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.145091 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.145091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126764Jy sigma=0.000654 ! Fit after self-cal, rms=0.126762Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.023 mas, bpa=-5.639 degrees ! Estimated noise=991.042 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.779 x 7.023 at -5.639 degrees (North through East) ! Clean map min=-0.0024079 max=0.14539 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.271 mas, bmaj=5.983 mas, bpa=-6.798 degrees ! Estimated noise=1435.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112604 Jy ! Component: 100 - total flux cleaned = 0.13716 Jy ! Component: 150 - total flux cleaned = 0.143438 Jy ! Component: 200 - total flux cleaned = 0.144507 Jy ! Total flux subtracted in 200 components = 0.144507 Jy ! Clean residual min=-0.003654 max=0.003676 Jy/beam ! Clean residual mean=0.000001 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.144507 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.144507 Jy ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.023 mas, bpa=-5.639 degrees ! Estimated noise=991.042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602773 Jy ! Component: 100 - total flux cleaned = 0.000659525 Jy ! Component: 150 - total flux cleaned = 0.000708496 Jy ! Component: 200 - total flux cleaned = 0.000708759 Jy ! Total flux subtracted in 200 components = 0.000708759 Jy ! Clean residual min=-0.002650 max=0.002502 Jy/beam ! Clean residual mean=0.000005 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.145216 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.145216 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.883 mas, bmaj=16.43 mas, bpa=5.589 degrees ! Estimated noise=1314.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.41901e-05 Jy ! Component: 100 - total flux cleaned = 9.29917e-05 Jy ! Component: 150 - total flux cleaned = 7.86169e-05 Jy ! Component: 200 - total flux cleaned = 7.78719e-05 Jy ! Total flux subtracted in 200 components = 7.78719e-05 Jy ! Clean residual min=-0.002845 max=0.002829 Jy/beam ! Clean residual mean=0.000012 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.145294 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.06477e-05 Jy ! Component: 100 - total flux cleaned = -1.99298e-05 Jy ! Component: 150 - total flux cleaned = -4.64557e-05 Jy ! Component: 200 - total flux cleaned = -6.28392e-05 Jy ! Total flux subtracted in 200 components = -6.28392e-05 Jy ! Clean residual min=-0.002838 max=0.002831 Jy/beam ! Clean residual mean=0.000011 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.145231 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.145231 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.023 mas, bpa=-5.639 degrees ! Estimated noise=991.042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.27781e-05 Jy ! Component: 100 - total flux cleaned = 7.72743e-05 Jy ! Component: 150 - total flux cleaned = 0.000130713 Jy ! Component: 200 - total flux cleaned = 0.000130979 Jy ! Total flux subtracted in 200 components = 0.000130979 Jy ! Clean residual min=-0.002496 max=0.002486 Jy/beam ! Clean residual mean=0.000005 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.145362 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.145362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126769Jy sigma=0.000654 ! Fit after self-cal, rms=0.126763Jy sigma=0.000654 wmodel J2342-2223_S_2017_01_21_pus_map.mod ! Writing 38 model components to file: J2342-2223_S_2017_01_21_pus_map.mod wobs J2342-2223_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2342-2223_S_2017_01_21_pus_uvs.fits wwins J2342-2223_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J2342-2223_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.96214e-05 Jy ! Component: 100 - total flux cleaned = 0.000467221 Jy ! Component: 150 - total flux cleaned = 0.000693884 Jy ! Component: 200 - total flux cleaned = 0.000910745 Jy ! Component: 250 - total flux cleaned = 0.00115294 Jy ! Component: 300 - total flux cleaned = 0.00132043 Jy ! Component: 350 - total flux cleaned = 0.00145091 Jy ! Component: 400 - total flux cleaned = 0.00151353 Jy ! Component: 450 - total flux cleaned = 0.001544 Jy ! Component: 500 - total flux cleaned = 0.00151378 Jy ! Component: 550 - total flux cleaned = 0.00151448 Jy ! Component: 600 - total flux cleaned = 0.00162723 Jy ! Component: 650 - total flux cleaned = 0.00159965 Jy ! Component: 700 - total flux cleaned = 0.00159986 Jy ! Component: 750 - total flux cleaned = 0.00167998 Jy ! Component: 800 - total flux cleaned = 0.00175794 Jy ! Component: 850 - total flux cleaned = 0.0018343 Jy ! Component: 900 - total flux cleaned = 0.0018846 Jy ! Component: 950 - total flux cleaned = 0.0019342 Jy ! Component: 1000 - total flux cleaned = 0.00205532 Jy ! Component: 1050 - total flux cleaned = 0.00210285 Jy ! Component: 1100 - total flux cleaned = 0.00217249 Jy ! Component: 1150 - total flux cleaned = 0.00217182 Jy ! Component: 1200 - total flux cleaned = 0.00219463 Jy ! Component: 1250 - total flux cleaned = 0.00226163 Jy ! Component: 1300 - total flux cleaned = 0.00228384 Jy ! Component: 1350 - total flux cleaned = 0.00228367 Jy ! Component: 1400 - total flux cleaned = 0.00226221 Jy ! Component: 1450 - total flux cleaned = 0.00232599 Jy ! Component: 1500 - total flux cleaned = 0.00232586 Jy ! Component: 1550 - total flux cleaned = 0.00230546 Jy ! Component: 1600 - total flux cleaned = 0.00232584 Jy ! Component: 1650 - total flux cleaned = 0.00236603 Jy ! Component: 1700 - total flux cleaned = 0.00242555 Jy ! Component: 1750 - total flux cleaned = 0.00238594 Jy ! Component: 1800 - total flux cleaned = 0.00252181 Jy ! Component: 1850 - total flux cleaned = 0.00254094 Jy ! Component: 1900 - total flux cleaned = 0.00254061 Jy ! Component: 1950 - total flux cleaned = 0.00250308 Jy ! Component: 2000 - total flux cleaned = 0.00254013 Jy ! Component: 2050 - total flux cleaned = 0.00255863 Jy ! Component: 2100 - total flux cleaned = 0.0026311 Jy ! Component: 2150 - total flux cleaned = 0.00263078 Jy ! Component: 2200 - total flux cleaned = 0.00268447 Jy ! Component: 2250 - total flux cleaned = 0.00270172 Jy ! Component: 2300 - total flux cleaned = 0.00271941 Jy ! Component: 2350 - total flux cleaned = 0.00275418 Jy ! Component: 2400 - total flux cleaned = 0.00283956 Jy ! Component: 2450 - total flux cleaned = 0.00282247 Jy ! Component: 2500 - total flux cleaned = 0.00290624 Jy ! Component: 2550 - total flux cleaned = 0.00292274 Jy ! Component: 2600 - total flux cleaned = 0.00295564 Jy ! Component: 2650 - total flux cleaned = 0.00300454 Jy ! Component: 2700 - total flux cleaned = 0.00297214 Jy ! Component: 2750 - total flux cleaned = 0.00302046 Jy ! Component: 2800 - total flux cleaned = 0.00308407 Jy ! Component: 2850 - total flux cleaned = 0.00308397 Jy ! Component: 2900 - total flux cleaned = 0.00311512 Jy ! Component: 2950 - total flux cleaned = 0.00311527 Jy ! Component: 3000 - total flux cleaned = 0.00316159 Jy ! Component: 3050 - total flux cleaned = 0.00314615 Jy ! Component: 3100 - total flux cleaned = 0.00314618 Jy ! Component: 3150 - total flux cleaned = 0.00316108 Jy ! Component: 3200 - total flux cleaned = 0.00313126 Jy ! Component: 3250 - total flux cleaned = 0.00317577 Jy ! Component: 3300 - total flux cleaned = 0.00324955 Jy ! Component: 3350 - total flux cleaned = 0.00323485 Jy ! Component: 3400 - total flux cleaned = 0.00329295 Jy ! Component: 3450 - total flux cleaned = 0.00326408 Jy ! Component: 3500 - total flux cleaned = 0.00326428 Jy ! Component: 3550 - total flux cleaned = 0.00336401 Jy ! Component: 3600 - total flux cleaned = 0.00333581 Jy ! Component: 3650 - total flux cleaned = 0.00342028 Jy ! Component: 3700 - total flux cleaned = 0.00344817 Jy ! Component: 3750 - total flux cleaned = 0.00346204 Jy ! Component: 3800 - total flux cleaned = 0.00342066 Jy ! Component: 3850 - total flux cleaned = 0.00343441 Jy ! Component: 3900 - total flux cleaned = 0.00348913 Jy ! Component: 3950 - total flux cleaned = 0.0034756 Jy ! Component: 4000 - total flux cleaned = 0.00350271 Jy ! Component: 4050 - total flux cleaned = 0.00350266 Jy ! Total flux subtracted in 4096 components = 0.00351608 Jy ! Clean residual min=-0.000764 max=0.000852 Jy/beam ! Clean residual mean=0.000003 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.148878 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 313 components and 0.148878 Jy ![Exited script file: muppet] wmap "J2342-2223_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.779 x 7.023 at -5.639 degrees (North through East) ! Clean map min=-0.0014391 max=0.14504 Jy/beam ! Writing clean map to FITS file: J2342-2223_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.145038 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000231174 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.478167 0.478167 0.956333 1.91267 3.82533 7.65067 15.3013 30.6027 61.2053 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.779 x 7.023 at -5.639 degrees (North through East) ! Clean map min=-0.0014391 max=0.14504 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2342-2223_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:07:18 2019