! Started logfile: J2342-0322_S_2017_07_09_pus_uvs.log on Wed May 8 14:59:11 2019 obs J2342-0322_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J2342-0322_S_2017_07_09_pus_uva.fits ! AN table 1: 264 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.986364 visibilities/baseline/integration-bin. ! Found source: J2342-0322 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 46872 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2342-0322_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1463 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.935408Jy sigma=0.008480 ! Fit after self-cal, rms=0.916024Jy sigma=0.008311 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=7.148 mas, bpa=-7.434 degrees ! Estimated noise=648.722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0590127 Jy ! Component: 100 - total flux cleaned = 0.0771365 Jy ! Total flux subtracted in 100 components = 0.0771365 Jy ! Clean residual min=-0.007031 max=0.021650 Jy/beam ! Clean residual mean=0.000031 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.0771365 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0771365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093616Jy sigma=0.000816 ! Fit after self-cal, rms=0.093489Jy sigma=0.000814 ! Inverting map ! Added new window around map position (5.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190331 Jy ! Component: 100 - total flux cleaned = 0.0302784 Jy ! Total flux subtracted in 100 components = 0.0302784 Jy ! Clean residual min=-0.005571 max=0.015242 Jy/beam ! Clean residual mean=0.000022 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.107415 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.107415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087296Jy sigma=0.000754 ! Fit after self-cal, rms=0.086185Jy sigma=0.000745 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141132 Jy ! Component: 100 - total flux cleaned = 0.0214655 Jy ! Total flux subtracted in 100 components = 0.0214655 Jy ! Clean residual min=-0.004337 max=0.007798 Jy/beam ! Clean residual mean=0.000015 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.12888 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.12888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082872Jy sigma=0.000714 ! Fit after self-cal, rms=0.082171Jy sigma=0.000707 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00931477 Jy ! Component: 100 - total flux cleaned = 0.013861 Jy ! Total flux subtracted in 100 components = 0.013861 Jy ! Clean residual min=-0.003506 max=0.003624 Jy/beam ! Clean residual mean=0.000010 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.142742 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.142742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080750Jy sigma=0.000695 ! Fit after self-cal, rms=0.080465Jy sigma=0.000692 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539195 Jy ! Component: 100 - total flux cleaned = 0.00730898 Jy ! Total flux subtracted in 100 components = 0.00730898 Jy ! Clean residual min=-0.003067 max=0.002907 Jy/beam ! Clean residual mean=0.000007 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.150051 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.150051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079989Jy sigma=0.000689 ! Fit after self-cal, rms=0.079900Jy sigma=0.000688 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=8.108 mas, bpa=-5.125 degrees ! Estimated noise=420.196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360804 Jy ! Component: 100 - total flux cleaned = 0.00414937 Jy ! Component: 150 - total flux cleaned = 0.00404193 Jy ! Component: 200 - total flux cleaned = 0.00395302 Jy ! Total flux subtracted in 200 components = 0.00395302 Jy ! Clean residual min=-0.002236 max=0.002961 Jy/beam ! Clean residual mean=0.000011 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.154004 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.154004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079702Jy sigma=0.000687 ! Fit after self-cal, rms=0.079648Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 0.95 KP 1.04 ! LA 0.99 MK 1.02 NL 0.93 OV 1.05 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.97 HN 1.06 KP 0.99 ! LA 0.98 MK 1.02 NL 1.05 OV 1.07 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.97 KP 1.00 ! LA 0.99 MK 1.03 NL 0.99 OV 0.99 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.81 KP 1.00* ! LA 0.89 MK 1.09 NL 1.00* OV 1.00* ! PT 1.08 SC 1.00* ! ! ! Fit before self-cal, rms=0.079648Jy sigma=0.000686 ! Fit after self-cal, rms=0.079296Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=8.116 mas, bpa=-5.04 degrees ! Estimated noise=421.331 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103408 Jy ! Component: 100 - total flux cleaned = 0.000888526 Jy ! Component: 150 - total flux cleaned = 0.000730684 Jy ! Component: 200 - total flux cleaned = 0.000627986 Jy ! Total flux subtracted in 200 components = 0.000627986 Jy ! Clean residual min=-0.001770 max=0.002253 Jy/beam ! Clean residual mean=0.000003 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.154632 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 72 components and 0.154632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079227Jy sigma=0.000684 ! Fit after self-cal, rms=0.079194Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079194Jy sigma=0.000684 ! Fit after self-cal, rms=0.079422Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.204 mas, bmaj=8.123 mas, bpa=-4.99 degrees ! Estimated noise=422.422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571415 Jy ! Component: 100 - total flux cleaned = 0.000346361 Jy ! Component: 150 - total flux cleaned = 0.000287533 Jy ! Component: 200 - total flux cleaned = 0.000236519 Jy ! Total flux subtracted in 200 components = 0.000236519 Jy ! Clean residual min=-0.001434 max=0.001903 Jy/beam ! Clean residual mean=0.000005 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.154868 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.154868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079385Jy sigma=0.000681 ! Fit after self-cal, rms=0.079383Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160705 Jy ! Component: 100 - total flux cleaned = 0.00213094 Jy ! Component: 150 - total flux cleaned = 0.00244133 Jy ! Component: 200 - total flux cleaned = 0.00269704 Jy ! Total flux subtracted in 200 components = 0.00269704 Jy ! Clean residual min=-0.001403 max=0.001466 Jy/beam ! Clean residual mean=0.000003 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.157565 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 98 components and 0.157565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079335Jy sigma=0.000680 ! Fit after self-cal, rms=0.079327Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079327Jy sigma=0.000680 ! Fit after self-cal, rms=0.079500Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.204 mas, bmaj=8.127 mas, bpa=-5.003 degrees ! Estimated noise=421.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000721747 Jy ! Component: 100 - total flux cleaned = 0.000816724 Jy ! Component: 150 - total flux cleaned = 0.00100067 Jy ! Component: 200 - total flux cleaned = 0.00109212 Jy ! Total flux subtracted in 200 components = 0.00109212 Jy ! Clean residual min=-0.001320 max=0.001352 Jy/beam ! Clean residual mean=0.000005 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.158657 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 111 components and 0.158657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079476Jy sigma=0.000680 ! Fit after self-cal, rms=0.079479Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.98713e-05 Jy ! Component: 100 - total flux cleaned = 0.000118405 Jy ! Component: 150 - total flux cleaned = 0.000138366 Jy ! Component: 200 - total flux cleaned = 0.000157411 Jy ! Total flux subtracted in 200 components = 0.000157411 Jy ! Clean residual min=-0.001232 max=0.001319 Jy/beam ! Clean residual mean=0.000004 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.158815 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 123 components and 0.158815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079468Jy sigma=0.000679 ! Fit after self-cal, rms=0.079465Jy sigma=0.000679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079465Jy sigma=0.000679 ! Fit after self-cal, rms=0.079702Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.382 mas, bmaj=13.4 mas, bpa=-6.763 degrees ! Estimated noise=534.837 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210477 Jy ! Component: 100 - total flux cleaned = 0.000258497 Jy ! Component: 150 - total flux cleaned = 0.000257018 Jy ! Component: 200 - total flux cleaned = 0.000256812 Jy ! Total flux subtracted in 200 components = 0.000256812 Jy ! Clean residual min=-0.001225 max=0.001721 Jy/beam ! Clean residual mean=0.000010 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.159072 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 144 components and 0.159072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079695Jy sigma=0.000679 ! Fit after self-cal, rms=0.079696Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.74991e-05 Jy ! Component: 100 - total flux cleaned = 7.99286e-05 Jy ! Component: 150 - total flux cleaned = 9.11208e-05 Jy ! Component: 200 - total flux cleaned = 0.000112624 Jy ! Total flux subtracted in 200 components = 0.000112624 Jy ! Clean residual min=-0.001209 max=0.001710 Jy/beam ! Clean residual mean=0.000009 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.159184 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 162 components and 0.159184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079693Jy sigma=0.000679 ! Fit after self-cal, rms=0.079690Jy sigma=0.000679 ! Inverting map ! Added new window around map position (20.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157037 Jy ! Component: 100 - total flux cleaned = 0.00240002 Jy ! Component: 150 - total flux cleaned = 0.00275996 Jy ! Component: 200 - total flux cleaned = 0.00289388 Jy ! Total flux subtracted in 200 components = 0.00289388 Jy ! Clean residual min=-0.001067 max=0.001423 Jy/beam ! Clean residual mean=0.000004 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.162078 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 207 components and 0.162078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079669Jy sigma=0.000679 ! Fit after self-cal, rms=0.079666Jy sigma=0.000679 ! Inverting map ! Added new window around map position (102.5, 121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000909003 Jy ! Component: 100 - total flux cleaned = 0.0010575 Jy ! Component: 150 - total flux cleaned = 0.00105925 Jy ! Component: 200 - total flux cleaned = 0.00108139 Jy ! Total flux subtracted in 200 components = 0.00108139 Jy ! Clean residual min=-0.000931 max=0.001079 Jy/beam ! Clean residual mean=0.000004 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.163159 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 233 components and 0.163159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079648Jy sigma=0.000679 ! Fit after self-cal, rms=0.079647Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=8.134 mas, bpa=-4.998 degrees ! Estimated noise=422.335 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.207 x 8.134 at -4.998 degrees (North through East) ! Clean map min=-0.0010537 max=0.070696 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=7.173 mas, bpa=-7.535 degrees ! Estimated noise=651.195 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0632356 Jy ! Component: 100 - total flux cleaned = 0.0933507 Jy ! Component: 150 - total flux cleaned = 0.111837 Jy ! Component: 200 - total flux cleaned = 0.124009 Jy ! Total flux subtracted in 200 components = 0.124009 Jy ! Clean residual min=-0.003350 max=0.006538 Jy/beam ! Clean residual mean=0.000013 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.124009 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.124009 Jy ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=8.134 mas, bpa=-4.998 degrees ! Estimated noise=422.335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122891 Jy ! Component: 100 - total flux cleaned = 0.019261 Jy ! Component: 150 - total flux cleaned = 0.0235148 Jy ! Component: 200 - total flux cleaned = 0.0264476 Jy ! Total flux subtracted in 200 components = 0.0264476 Jy ! Clean residual min=-0.001595 max=0.001847 Jy/beam ! Clean residual mean=0.000012 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.150456 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 52 components and 0.150456 Jy ! Inverting map ! Added new window around map position (3, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219449 Jy ! Component: 100 - total flux cleaned = 0.00392109 Jy ! Component: 150 - total flux cleaned = 0.00522656 Jy ! Component: 200 - total flux cleaned = 0.00626768 Jy ! Total flux subtracted in 200 components = 0.00626768 Jy ! Clean residual min=-0.001353 max=0.001311 Jy/beam ! Clean residual mean=0.000007 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.156724 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 83 components and 0.156724 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.382 mas, bmaj=13.4 mas, bpa=-6.763 degrees ! Estimated noise=534.837 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172951 Jy ! Component: 100 - total flux cleaned = 0.00303975 Jy ! Component: 150 - total flux cleaned = 0.00384364 Jy ! Component: 200 - total flux cleaned = 0.00444441 Jy ! Total flux subtracted in 200 components = 0.00444441 Jy ! Clean residual min=-0.001129 max=0.001166 Jy/beam ! Clean residual mean=0.000007 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.161168 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000514849 Jy ! Component: 100 - total flux cleaned = 0.000890626 Jy ! Component: 150 - total flux cleaned = 0.00122977 Jy ! Component: 200 - total flux cleaned = 0.00145186 Jy ! Total flux subtracted in 200 components = 0.00145186 Jy ! Clean residual min=-0.001060 max=0.001161 Jy/beam ! Clean residual mean=0.000005 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.16262 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 167 components and 0.16262 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=8.134 mas, bpa=-4.998 degrees ! Estimated noise=422.335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185802 Jy ! Component: 100 - total flux cleaned = -0.000152986 Jy ! Component: 150 - total flux cleaned = -6.01009e-05 Jy ! Component: 200 - total flux cleaned = -1.6008e-06 Jy ! Total flux subtracted in 200 components = -1.6008e-06 Jy ! Clean residual min=-0.001062 max=0.001084 Jy/beam ! Clean residual mean=0.000002 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.162619 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 200 components and 0.162619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079642Jy sigma=0.000679 ! Fit after self-cal, rms=0.079628Jy sigma=0.000679 wmodel J2342-0322_S_2017_07_09_pus_map.mod ! Writing 200 model components to file: J2342-0322_S_2017_07_09_pus_map.mod wobs J2342-0322_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J2342-0322_S_2017_07_09_pus_uvs.fits wwins J2342-0322_S_2017_07_09_pus_map.win ! wwins: Wrote 6 windows to J2342-0322_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132439 Jy ! Component: 100 - total flux cleaned = 0.000115316 Jy ! Component: 150 - total flux cleaned = 0.000181846 Jy ! Component: 200 - total flux cleaned = 0.000278499 Jy ! Component: 250 - total flux cleaned = 0.000387395 Jy ! Component: 300 - total flux cleaned = 0.000478452 Jy ! Component: 350 - total flux cleaned = 0.000552945 Jy ! Component: 400 - total flux cleaned = 0.000611329 Jy ! Component: 450 - total flux cleaned = 0.000597175 Jy ! Component: 500 - total flux cleaned = 0.000625442 Jy ! Component: 550 - total flux cleaned = 0.000598041 Jy ! Component: 600 - total flux cleaned = 0.000625595 Jy ! Component: 650 - total flux cleaned = 0.000598748 Jy ! Component: 700 - total flux cleaned = 0.000599026 Jy ! Component: 750 - total flux cleaned = 0.000638206 Jy ! Component: 800 - total flux cleaned = 0.000612181 Jy ! Component: 850 - total flux cleaned = 0.000586576 Jy ! Component: 900 - total flux cleaned = 0.000548989 Jy ! Component: 950 - total flux cleaned = 0.000524228 Jy ! Component: 1000 - total flux cleaned = 0.000450831 Jy ! Component: 1050 - total flux cleaned = 0.00045098 Jy ! Component: 1100 - total flux cleaned = 0.000462832 Jy ! Component: 1150 - total flux cleaned = 0.00045114 Jy ! Component: 1200 - total flux cleaned = 0.000462641 Jy ! Component: 1250 - total flux cleaned = 0.000485899 Jy ! Component: 1300 - total flux cleaned = 0.000497299 Jy ! Component: 1350 - total flux cleaned = 0.000542497 Jy ! Component: 1400 - total flux cleaned = 0.000497473 Jy ! Component: 1450 - total flux cleaned = 0.000508551 Jy ! Component: 1500 - total flux cleaned = 0.000519615 Jy ! Component: 1550 - total flux cleaned = 0.000541307 Jy ! Component: 1600 - total flux cleaned = 0.000487347 Jy ! Component: 1650 - total flux cleaned = 0.0004767 Jy ! Component: 1700 - total flux cleaned = 0.000444968 Jy ! Component: 1750 - total flux cleaned = 0.00044503 Jy ! Component: 1800 - total flux cleaned = 0.000424146 Jy ! Component: 1850 - total flux cleaned = 0.000403471 Jy ! Component: 1900 - total flux cleaned = 0.000434212 Jy ! Component: 1950 - total flux cleaned = 0.000372845 Jy ! Component: 2000 - total flux cleaned = 0.000362643 Jy ! Component: 2050 - total flux cleaned = 0.000372731 Jy ! Component: 2100 - total flux cleaned = 0.000312667 Jy ! Component: 2150 - total flux cleaned = 0.000322568 Jy ! Component: 2200 - total flux cleaned = 0.000302803 Jy ! Component: 2250 - total flux cleaned = 0.000273318 Jy ! Component: 2300 - total flux cleaned = 0.000273333 Jy ! Component: 2350 - total flux cleaned = 0.000263649 Jy ! Component: 2400 - total flux cleaned = 0.000225402 Jy ! Component: 2450 - total flux cleaned = 0.00023486 Jy ! Component: 2500 - total flux cleaned = 0.000187666 Jy ! Component: 2550 - total flux cleaned = 0.000206518 Jy ! Component: 2600 - total flux cleaned = 0.000215846 Jy ! Component: 2650 - total flux cleaned = 0.000197298 Jy ! Component: 2700 - total flux cleaned = 0.000178946 Jy ! Component: 2750 - total flux cleaned = 0.000160588 Jy ! Component: 2800 - total flux cleaned = 0.000178779 Jy ! Component: 2850 - total flux cleaned = 0.000142677 Jy ! Component: 2900 - total flux cleaned = 9.78345e-05 Jy ! Component: 2950 - total flux cleaned = 0.000142385 Jy ! Component: 3000 - total flux cleaned = 0.000107081 Jy ! Component: 3050 - total flux cleaned = 0.000115953 Jy ! Component: 3100 - total flux cleaned = 8.97298e-05 Jy ! Component: 3150 - total flux cleaned = 0.00011578 Jy ! Component: 3200 - total flux cleaned = 0.000115706 Jy ! Component: 3250 - total flux cleaned = 0.000107168 Jy ! Component: 3300 - total flux cleaned = 0.000115802 Jy ! Component: 3350 - total flux cleaned = 0.000132928 Jy ! Component: 3400 - total flux cleaned = 0.000132916 Jy ! Component: 3450 - total flux cleaned = 0.000141337 Jy ! Component: 3500 - total flux cleaned = 0.000157985 Jy ! Component: 3550 - total flux cleaned = 0.000149653 Jy ! Component: 3600 - total flux cleaned = 0.000149659 Jy ! Component: 3650 - total flux cleaned = 0.000174389 Jy ! Component: 3700 - total flux cleaned = 0.000125162 Jy ! Component: 3750 - total flux cleaned = 0.000157678 Jy ! Component: 3800 - total flux cleaned = 0.000133469 Jy ! Component: 3850 - total flux cleaned = 0.000125413 Jy ! Component: 3900 - total flux cleaned = 0.00014151 Jy ! Component: 3950 - total flux cleaned = 0.000149422 Jy ! Component: 4000 - total flux cleaned = 0.000157311 Jy ! Component: 4050 - total flux cleaned = 0.000110089 Jy ! Total flux subtracted in 4096 components = 0.000157148 Jy ! Clean residual min=-0.000506 max=0.000460 Jy/beam ! Clean residual mean=-0.000000 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.162776 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 494 components and 0.162776 Jy ![Exited script file: muppet] wmap "J2342-0322_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.207 x 8.134 at -4.998 degrees (North through East) ! Clean map min=-0.00078391 max=0.071275 Jy/beam ! Writing clean map to FITS file: J2342-0322_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0712748 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00014568 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.613177 0.613177 1.22635 2.45271 4.90542 9.81083 19.6217 39.2433 78.4867 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.207 x 8.134 at -4.998 degrees (North through East) ! Clean map min=-0.00078391 max=0.071275 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2342-0322_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:59:18 2019