! Started logfile: J2339-1206_S_2017_04_28_pus_uvs.log on Thu May 2 16:35:53 2019 obs J2339-1206_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J2339-1206_S_2017_04_28_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.962573 visibilities/baseline/integration-bin. ! Found source: J2339-1206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13168 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2339-1206_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 317 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921448Jy sigma=0.006599 ! Fit after self-cal, rms=0.910788Jy sigma=0.006535 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.62 mas, bmaj=6.909 mas, bpa=-5.869 degrees ! Estimated noise=1328.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0738469 Jy ! Component: 100 - total flux cleaned = 0.0901246 Jy ! Total flux subtracted in 100 components = 0.0901246 Jy ! Clean residual min=-0.004629 max=0.005280 Jy/beam ! Clean residual mean=0.000001 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.0901246 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0901246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106104Jy sigma=0.000662 ! Fit after self-cal, rms=0.106114Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=7.923 mas, bpa=-3.866 degrees ! Estimated noise=964.895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379245 Jy ! Component: 100 - total flux cleaned = 0.00371284 Jy ! Component: 150 - total flux cleaned = 0.00364769 Jy ! Component: 200 - total flux cleaned = 0.00359459 Jy ! Total flux subtracted in 200 components = 0.00359459 Jy ! Clean residual min=-0.002900 max=0.003209 Jy/beam ! Clean residual mean=0.000001 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.0937192 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 0.0937192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105911Jy sigma=0.000661 ! Fit after self-cal, rms=0.105895Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 0.98 KP 1.04 ! LA 1.14 MK 0.98 NL 1.00 OV 0.97 ! PT 1.06 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.86 HN 1.04 KP 1.00 ! LA 0.97 MK 0.99 NL 1.09 OV 1.06 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 0.96 KP 0.98 ! LA 1.23 MK 1.04 NL 1.09 OV 0.92 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 0.93 KP 1.00* ! LA 0.59 MK 1.12 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.105895Jy sigma=0.000661 ! Fit after self-cal, rms=0.100665Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=7.892 mas, bpa=-3.416 degrees ! Estimated noise=956.889 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.4395e-05 Jy ! Component: 100 - total flux cleaned = -0.000172869 Jy ! Component: 150 - total flux cleaned = -0.000240635 Jy ! Component: 200 - total flux cleaned = -0.000261933 Jy ! Total flux subtracted in 200 components = -0.000261933 Jy ! Clean residual min=-0.002524 max=0.002835 Jy/beam ! Clean residual mean=-0.000001 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0934573 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.0934573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100651Jy sigma=0.000657 ! Fit after self-cal, rms=0.100607Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100607Jy sigma=0.000657 ! Fit after self-cal, rms=0.103389Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=7.893 mas, bpa=-3.38 degrees ! Estimated noise=954.915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000199805 Jy ! Component: 100 - total flux cleaned = 0.000200265 Jy ! Component: 150 - total flux cleaned = 0.000199667 Jy ! Component: 200 - total flux cleaned = 0.000199254 Jy ! Total flux subtracted in 200 components = 0.000199254 Jy ! Clean residual min=-0.002427 max=0.002397 Jy/beam ! Clean residual mean=-0.000002 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0936565 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0936565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103380Jy sigma=0.000655 ! Fit after self-cal, rms=0.103482Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.04804e-05 Jy ! Component: 100 - total flux cleaned = -5.60285e-05 Jy ! Component: 150 - total flux cleaned = -5.57848e-05 Jy ! Component: 200 - total flux cleaned = -6.95174e-05 Jy ! Total flux subtracted in 200 components = -6.95174e-05 Jy ! Clean residual min=-0.002390 max=0.002395 Jy/beam ! Clean residual mean=-0.000002 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.093587 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.093587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103477Jy sigma=0.000655 ! Fit after self-cal, rms=0.103511Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103511Jy sigma=0.000655 ! Fit after self-cal, rms=0.104196Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=7.895 mas, bpa=-3.413 degrees ! Estimated noise=954.283 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.67268e-05 Jy ! Component: 100 - total flux cleaned = 6.20711e-05 Jy ! Component: 150 - total flux cleaned = 6.2204e-05 Jy ! Component: 200 - total flux cleaned = 6.23006e-05 Jy ! Total flux subtracted in 200 components = 6.23006e-05 Jy ! Clean residual min=-0.002407 max=0.002324 Jy/beam ! Clean residual mean=-0.000002 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0936493 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.0936493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104191Jy sigma=0.000655 ! Fit after self-cal, rms=0.104200Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.79169e-06 Jy ! Component: 100 - total flux cleaned = -1.67942e-06 Jy ! Component: 150 - total flux cleaned = -1.34666e-05 Jy ! Component: 200 - total flux cleaned = -2.45754e-05 Jy ! Total flux subtracted in 200 components = -2.45754e-05 Jy ! Clean residual min=-0.002406 max=0.002332 Jy/beam ! Clean residual mean=-0.000002 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0936248 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0936248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104197Jy sigma=0.000655 ! Fit after self-cal, rms=0.104197Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104197Jy sigma=0.000655 ! Fit after self-cal, rms=0.104233Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.404 mas, bmaj=14.36 mas, bpa=4.91 degrees ! Estimated noise=1213.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201211 Jy ! Component: 100 - total flux cleaned = -0.000184027 Jy ! Component: 150 - total flux cleaned = -0.000162086 Jy ! Component: 200 - total flux cleaned = -0.00014977 Jy ! Total flux subtracted in 200 components = -0.00014977 Jy ! Clean residual min=-0.002390 max=0.002342 Jy/beam ! Clean residual mean=-0.000004 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.093475 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.093475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104234Jy sigma=0.000655 ! Fit after self-cal, rms=0.104237Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.91025e-05 Jy ! Component: 100 - total flux cleaned = -8.52075e-05 Jy ! Component: 150 - total flux cleaned = -7.31704e-05 Jy ! Component: 200 - total flux cleaned = -5.7807e-05 Jy ! Total flux subtracted in 200 components = -5.7807e-05 Jy ! Clean residual min=-0.002381 max=0.002331 Jy/beam ! Clean residual mean=-0.000004 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.0934172 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.0934172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104238Jy sigma=0.000655 ! Fit after self-cal, rms=0.104239Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=7.898 mas, bpa=-3.447 degrees ! Estimated noise=953.996 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.166 x 7.898 at -3.447 degrees (North through East) ! Clean map min=-0.0023205 max=0.093124 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.627 mas, bmaj=6.907 mas, bpa=-5.267 degrees ! Estimated noise=1299.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0723387 Jy ! Component: 100 - total flux cleaned = 0.0882464 Jy ! Component: 150 - total flux cleaned = 0.093068 Jy ! Component: 200 - total flux cleaned = 0.0941167 Jy ! Total flux subtracted in 200 components = 0.0941167 Jy ! Clean residual min=-0.003265 max=0.003304 Jy/beam ! Clean residual mean=-0.000003 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0941167 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0941167 Jy ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=7.898 mas, bpa=-3.447 degrees ! Estimated noise=953.996 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.51937e-05 Jy ! Component: 100 - total flux cleaned = 5.13812e-06 Jy ! Component: 150 - total flux cleaned = 3.97872e-05 Jy ! Component: 200 - total flux cleaned = 7.19079e-05 Jy ! Total flux subtracted in 200 components = 7.19079e-05 Jy ! Clean residual min=-0.002463 max=0.002379 Jy/beam ! Clean residual mean=-0.000002 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.0941886 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.0941886 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.404 mas, bmaj=14.36 mas, bpa=4.91 degrees ! Estimated noise=1213.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000473883 Jy ! Component: 100 - total flux cleaned = -0.000471681 Jy ! Component: 150 - total flux cleaned = -0.000462802 Jy ! Component: 200 - total flux cleaned = -0.000469818 Jy ! Total flux subtracted in 200 components = -0.000469818 Jy ! Clean residual min=-0.002397 max=0.002358 Jy/beam ! Clean residual mean=-0.000004 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.0937188 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.69808e-06 Jy ! Component: 100 - total flux cleaned = -1.93305e-05 Jy ! Component: 150 - total flux cleaned = -3.11811e-05 Jy ! Component: 200 - total flux cleaned = -4.21293e-05 Jy ! Total flux subtracted in 200 components = -4.21293e-05 Jy ! Clean residual min=-0.002386 max=0.002357 Jy/beam ! Clean residual mean=-0.000004 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0936767 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.0936767 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=7.898 mas, bpa=-3.447 degrees ! Estimated noise=953.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000317908 Jy ! Component: 100 - total flux cleaned = 0.000212765 Jy ! Component: 150 - total flux cleaned = 0.000234397 Jy ! Component: 200 - total flux cleaned = 0.000233849 Jy ! Total flux subtracted in 200 components = 0.000233849 Jy ! Clean residual min=-0.002450 max=0.002364 Jy/beam ! Clean residual mean=-0.000002 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0939105 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0939105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104246Jy sigma=0.000655 ! Fit after self-cal, rms=0.104244Jy sigma=0.000655 wmodel J2339-1206_S_2017_04_28_pus_map.mod ! Writing 31 model components to file: J2339-1206_S_2017_04_28_pus_map.mod wobs J2339-1206_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J2339-1206_S_2017_04_28_pus_uvs.fits wwins J2339-1206_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J2339-1206_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203735 Jy ! Component: 100 - total flux cleaned = 0.000634413 Jy ! Component: 150 - total flux cleaned = 0.00104029 Jy ! Component: 200 - total flux cleaned = 0.00128785 Jy ! Component: 250 - total flux cleaned = 0.00139064 Jy ! Component: 300 - total flux cleaned = 0.00158951 Jy ! Component: 350 - total flux cleaned = 0.00178294 Jy ! Component: 400 - total flux cleaned = 0.0018776 Jy ! Component: 450 - total flux cleaned = 0.00197017 Jy ! Component: 500 - total flux cleaned = 0.0020005 Jy ! Component: 550 - total flux cleaned = 0.00197086 Jy ! Component: 600 - total flux cleaned = 0.00191405 Jy ! Component: 650 - total flux cleaned = 0.00208471 Jy ! Component: 700 - total flux cleaned = 0.00208425 Jy ! Component: 750 - total flux cleaned = 0.0020295 Jy ! Component: 800 - total flux cleaned = 0.00208327 Jy ! Component: 850 - total flux cleaned = 0.00208308 Jy ! Component: 900 - total flux cleaned = 0.00210909 Jy ! Component: 950 - total flux cleaned = 0.00210936 Jy ! Component: 1000 - total flux cleaned = 0.00205896 Jy ! Component: 1050 - total flux cleaned = 0.00210889 Jy ! Component: 1100 - total flux cleaned = 0.00208386 Jy ! Component: 1150 - total flux cleaned = 0.00206002 Jy ! Component: 1200 - total flux cleaned = 0.00206015 Jy ! Component: 1250 - total flux cleaned = 0.00203662 Jy ! Component: 1300 - total flux cleaned = 0.00208306 Jy ! Component: 1350 - total flux cleaned = 0.00206022 Jy ! Component: 1400 - total flux cleaned = 0.00201502 Jy ! Component: 1450 - total flux cleaned = 0.0019705 Jy ! Component: 1500 - total flux cleaned = 0.00190444 Jy ! Component: 1550 - total flux cleaned = 0.00186103 Jy ! Component: 1600 - total flux cleaned = 0.00186127 Jy ! Component: 1650 - total flux cleaned = 0.00181848 Jy ! Component: 1700 - total flux cleaned = 0.00173477 Jy ! Component: 1750 - total flux cleaned = 0.00175523 Jy ! Component: 1800 - total flux cleaned = 0.00167348 Jy ! Component: 1850 - total flux cleaned = 0.00167358 Jy ! Component: 1900 - total flux cleaned = 0.00163332 Jy ! Component: 1950 - total flux cleaned = 0.00161366 Jy ! Component: 2000 - total flux cleaned = 0.00165286 Jy ! Component: 2050 - total flux cleaned = 0.0016722 Jy ! Component: 2100 - total flux cleaned = 0.00159496 Jy ! Component: 2150 - total flux cleaned = 0.00153766 Jy ! Component: 2200 - total flux cleaned = 0.00151857 Jy ! Component: 2250 - total flux cleaned = 0.0014812 Jy ! Component: 2300 - total flux cleaned = 0.00142559 Jy ! Component: 2350 - total flux cleaned = 0.00142553 Jy ! Component: 2400 - total flux cleaned = 0.00137047 Jy ! Component: 2450 - total flux cleaned = 0.00138834 Jy ! Component: 2500 - total flux cleaned = 0.00137011 Jy ! Component: 2550 - total flux cleaned = 0.00131664 Jy ! Component: 2600 - total flux cleaned = 0.00124646 Jy ! Component: 2650 - total flux cleaned = 0.001264 Jy ! Component: 2700 - total flux cleaned = 0.00116033 Jy ! Component: 2750 - total flux cleaned = 0.00116071 Jy ! Component: 2800 - total flux cleaned = 0.00114349 Jy ! Component: 2850 - total flux cleaned = 0.00110967 Jy ! Component: 2900 - total flux cleaned = 0.00105942 Jy ! Component: 2950 - total flux cleaned = 0.00100947 Jy ! Component: 3000 - total flux cleaned = 0.00105896 Jy ! Component: 3050 - total flux cleaned = 0.00101 Jy ! Component: 3100 - total flux cleaned = 0.0010422 Jy ! Component: 3150 - total flux cleaned = 0.000977607 Jy ! Component: 3200 - total flux cleaned = 0.00102553 Jy ! Component: 3250 - total flux cleaned = 0.000962176 Jy ! Component: 3300 - total flux cleaned = 0.00102491 Jy ! Component: 3350 - total flux cleaned = 0.000962501 Jy ! Component: 3400 - total flux cleaned = 0.00097785 Jy ! Component: 3450 - total flux cleaned = 0.000977752 Jy ! Component: 3500 - total flux cleaned = 0.000992798 Jy ! Component: 3550 - total flux cleaned = 0.000977673 Jy ! Component: 3600 - total flux cleaned = 0.000992811 Jy ! Component: 3650 - total flux cleaned = 0.00100759 Jy ! Component: 3700 - total flux cleaned = 0.000992801 Jy ! Component: 3750 - total flux cleaned = 0.00097812 Jy ! Component: 3800 - total flux cleaned = 0.000992631 Jy ! Component: 3850 - total flux cleaned = 0.000978237 Jy ! Component: 3900 - total flux cleaned = 0.000992557 Jy ! Component: 3950 - total flux cleaned = 0.000963994 Jy ! Component: 4000 - total flux cleaned = 0.000978141 Jy ! Component: 4050 - total flux cleaned = 0.000935765 Jy ! Total flux subtracted in 4096 components = 0.000893556 Jy ! Clean residual min=-0.000777 max=0.000845 Jy/beam ! Clean residual mean=-0.000000 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.0948041 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 319 components and 0.0948041 Jy ![Exited script file: muppet] wmap "J2339-1206_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.166 x 7.898 at -3.447 degrees (North through East) ! Clean map min=-0.0016807 max=0.092564 Jy/beam ! Writing clean map to FITS file: J2339-1206_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0925642 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000258529 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.83789 0.83789 1.67578 3.35156 6.70312 13.4062 26.8125 53.625 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.166 x 7.898 at -3.447 degrees (North through East) ! Clean map min=-0.0016807 max=0.092564 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2339-1206_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:35:57 2019