! Started logfile: J2339+6010_S_2017_06_10_pus_uvs.log on Mon May 6 15:03:41 2019 obs J2339+6010_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J2339+6010_S_2017_06_10_pus_uva.fits ! AN table 1: 152 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968129 visibilities/baseline/integration-bin. ! Found source: J2339+6010 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 26488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2339+6010_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 800 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.845366Jy sigma=0.008488 ! Fit after self-cal, rms=0.836302Jy sigma=0.008404 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=3.989 mas, bpa=-6.211 degrees ! Estimated noise=737.363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118557 Jy ! Component: 100 - total flux cleaned = 0.170945 Jy ! Total flux subtracted in 100 components = 0.170945 Jy ! Clean residual min=-0.007701 max=0.026722 Jy/beam ! Clean residual mean=-0.000092 rms=0.002600 Jy/beam ! Combined flux in latest and established models = 0.170945 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.170945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113605Jy sigma=0.001092 ! Fit after self-cal, rms=0.113387Jy sigma=0.001089 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333053 Jy ! Component: 100 - total flux cleaned = 0.0558807 Jy ! Total flux subtracted in 100 components = 0.0558807 Jy ! Clean residual min=-0.005167 max=0.015952 Jy/beam ! Clean residual mean=-0.000052 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.226826 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 0.226826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096441Jy sigma=0.000907 ! Fit after self-cal, rms=0.096387Jy sigma=0.000907 ! Inverting map ! Added new window around map position (-3.5, 6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179738 Jy ! Component: 100 - total flux cleaned = 0.0313757 Jy ! Total flux subtracted in 100 components = 0.0313757 Jy ! Clean residual min=-0.004063 max=0.010138 Jy/beam ! Clean residual mean=-0.000035 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.258202 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 73 components and 0.258202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090350Jy sigma=0.000843 ! Fit after self-cal, rms=0.090228Jy sigma=0.000842 ! Inverting map ! Added new window around map position (4, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115716 Jy ! Component: 100 - total flux cleaned = 0.0203619 Jy ! Total flux subtracted in 100 components = 0.0203619 Jy ! Clean residual min=-0.003074 max=0.007142 Jy/beam ! Clean residual mean=-0.000024 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.278564 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 93 components and 0.278564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087518Jy sigma=0.000814 ! Fit after self-cal, rms=0.087471Jy sigma=0.000814 ! Inverting map ! Added new window around map position (-4.5, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00776699 Jy ! Component: 100 - total flux cleaned = 0.0138491 Jy ! Total flux subtracted in 100 components = 0.0138491 Jy ! Clean residual min=-0.002869 max=0.004135 Jy/beam ! Clean residual mean=-0.000016 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.292413 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.292413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086198Jy sigma=0.000801 ! Fit after self-cal, rms=0.086184Jy sigma=0.000801 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=4.699 mas, bpa=-7.583 degrees ! Estimated noise=490.515 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0078218 Jy ! Component: 100 - total flux cleaned = 0.013304 Jy ! Component: 150 - total flux cleaned = 0.0173209 Jy ! Component: 200 - total flux cleaned = 0.0202888 Jy ! Total flux subtracted in 200 components = 0.0202888 Jy ! Clean residual min=-0.002731 max=0.004458 Jy/beam ! Clean residual mean=-0.000017 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.312701 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 137 components and 0.312701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085138Jy sigma=0.000793 ! Fit after self-cal, rms=0.085109Jy sigma=0.000792 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.02 KP 1.02 ! LA 0.98 MK 1.09 NL 0.89 OV 1.04 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 1.02 KP 0.98 ! LA 0.94 MK 1.02 NL 1.02 OV 0.97 ! PT 1.00 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.06 HN 1.02 KP 0.97 ! LA 0.98 MK 1.05 NL 0.99 OV 0.97 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.96 KP 1.00* ! LA 0.97 MK 0.91 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.085109Jy sigma=0.000792 ! Fit after self-cal, rms=0.082922Jy sigma=0.000783 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=4.738 mas, bpa=-7.485 degrees ! Estimated noise=492.661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391985 Jy ! Component: 100 - total flux cleaned = 0.00589996 Jy ! Component: 150 - total flux cleaned = 0.00730187 Jy ! Component: 200 - total flux cleaned = 0.00824444 Jy ! Total flux subtracted in 200 components = 0.00824444 Jy ! Clean residual min=-0.002635 max=0.002818 Jy/beam ! Clean residual mean=-0.000011 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.320946 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 164 components and 0.320946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082722Jy sigma=0.000781 ! Fit after self-cal, rms=0.082699Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082699Jy sigma=0.000781 ! Fit after self-cal, rms=0.079286Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=4.728 mas, bpa=-6.414 degrees ! Estimated noise=490.771 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140437 Jy ! Component: 100 - total flux cleaned = 0.00180248 Jy ! Component: 150 - total flux cleaned = 0.00197842 Jy ! Component: 200 - total flux cleaned = 0.0021064 Jy ! Total flux subtracted in 200 components = 0.0021064 Jy ! Clean residual min=-0.001899 max=0.002569 Jy/beam ! Clean residual mean=-0.000025 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.323052 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 177 components and 0.323052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079255Jy sigma=0.000770 ! Fit after self-cal, rms=0.079266Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, 19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217662 Jy ! Component: 100 - total flux cleaned = 0.0032219 Jy ! Component: 150 - total flux cleaned = 0.00354573 Jy ! Component: 200 - total flux cleaned = 0.00366144 Jy ! Total flux subtracted in 200 components = 0.00366144 Jy ! Clean residual min=-0.001917 max=0.002089 Jy/beam ! Clean residual mean=-0.000023 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.326714 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 192 components and 0.326714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079203Jy sigma=0.000769 ! Fit after self-cal, rms=0.079201Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079201Jy sigma=0.000769 ! Fit after self-cal, rms=0.079161Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=4.734 mas, bpa=-6.424 degrees ! Estimated noise=490.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000994885 Jy ! Component: 100 - total flux cleaned = 0.00167921 Jy ! Component: 150 - total flux cleaned = 0.00198899 Jy ! Component: 200 - total flux cleaned = 0.00218443 Jy ! Total flux subtracted in 200 components = 0.00218443 Jy ! Clean residual min=-0.001828 max=0.002081 Jy/beam ! Clean residual mean=-0.000024 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.328898 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 208 components and 0.328898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079142Jy sigma=0.000769 ! Fit after self-cal, rms=0.079147Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275209 Jy ! Component: 100 - total flux cleaned = 0.00047604 Jy ! Component: 150 - total flux cleaned = 0.000591795 Jy ! Component: 200 - total flux cleaned = 0.000728336 Jy ! Total flux subtracted in 200 components = 0.000728336 Jy ! Clean residual min=-0.001842 max=0.002081 Jy/beam ! Clean residual mean=-0.000024 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.329626 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 215 components and 0.329626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079139Jy sigma=0.000769 ! Fit after self-cal, rms=0.079140Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079140Jy sigma=0.000769 ! Fit after self-cal, rms=0.079120Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.295 mas, bmaj=8.54 mas, bpa=15.76 degrees ! Estimated noise=617.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000840723 Jy ! Component: 100 - total flux cleaned = 0.00121661 Jy ! Component: 150 - total flux cleaned = 0.001537 Jy ! Component: 200 - total flux cleaned = 0.00164369 Jy ! Total flux subtracted in 200 components = 0.00164369 Jy ! Clean residual min=-0.002803 max=0.003021 Jy/beam ! Clean residual mean=-0.000054 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.33127 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 222 components and 0.33127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079115Jy sigma=0.000769 ! Fit after self-cal, rms=0.079117Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.08686e-07 Jy ! Component: 100 - total flux cleaned = 0.00014877 Jy ! Component: 150 - total flux cleaned = 0.000210215 Jy ! Component: 200 - total flux cleaned = 0.000236924 Jy ! Total flux subtracted in 200 components = 0.000236924 Jy ! Clean residual min=-0.002758 max=0.003031 Jy/beam ! Clean residual mean=-0.000053 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.331507 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 231 components and 0.331507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079117Jy sigma=0.000769 ! Fit after self-cal, rms=0.079117Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=4.738 mas, bpa=-6.42 degrees ! Estimated noise=490.312 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.858 x 4.738 at -6.42 degrees (North through East) ! Clean map min=-0.0017384 max=0.15324 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=4.017 mas, bpa=-4.971 degrees ! Estimated noise=735.516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117966 Jy ! Component: 100 - total flux cleaned = 0.170447 Jy ! Component: 150 - total flux cleaned = 0.203517 Jy ! Component: 200 - total flux cleaned = 0.227027 Jy ! Total flux subtracted in 200 components = 0.227027 Jy ! Clean residual min=-0.004967 max=0.013463 Jy/beam ! Clean residual mean=-0.000062 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 0.227027 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.227027 Jy ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=4.738 mas, bpa=-6.42 degrees ! Estimated noise=490.312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277638 Jy ! Component: 100 - total flux cleaned = 0.0461952 Jy ! Component: 150 - total flux cleaned = 0.0589721 Jy ! Component: 200 - total flux cleaned = 0.0681889 Jy ! Total flux subtracted in 200 components = 0.0681889 Jy ! Clean residual min=-0.002820 max=0.005794 Jy/beam ! Clean residual mean=-0.000064 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.295216 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 127 components and 0.295216 Jy ! Inverting map ! Added new window around map position (2, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688748 Jy ! Component: 100 - total flux cleaned = 0.0121255 Jy ! Component: 150 - total flux cleaned = 0.0162637 Jy ! Component: 200 - total flux cleaned = 0.0195898 Jy ! Total flux subtracted in 200 components = 0.0195898 Jy ! Clean residual min=-0.002109 max=0.002350 Jy/beam ! Clean residual mean=-0.000042 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.314805 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 171 components and 0.314805 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.295 mas, bmaj=8.54 mas, bpa=15.76 degrees ! Estimated noise=617.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475601 Jy ! Component: 100 - total flux cleaned = 0.00799796 Jy ! Component: 150 - total flux cleaned = 0.0103525 Jy ! Component: 200 - total flux cleaned = 0.0121163 Jy ! Total flux subtracted in 200 components = 0.0121163 Jy ! Clean residual min=-0.002835 max=0.003178 Jy/beam ! Clean residual mean=-0.000064 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.326922 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013367 Jy ! Component: 100 - total flux cleaned = 0.00235981 Jy ! Component: 150 - total flux cleaned = 0.00314787 Jy ! Component: 200 - total flux cleaned = 0.00360135 Jy ! Total flux subtracted in 200 components = 0.00360135 Jy ! Clean residual min=-0.002794 max=0.003055 Jy/beam ! Clean residual mean=-0.000056 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.330523 Jy ! Adding 149 model components to the UV plane model. ! The established model now contains 294 components and 0.330523 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=4.738 mas, bpa=-6.42 degrees ! Estimated noise=490.312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361269 Jy ! Component: 100 - total flux cleaned = 0.000547285 Jy ! Component: 150 - total flux cleaned = 0.000689194 Jy ! Component: 200 - total flux cleaned = 0.000793476 Jy ! Total flux subtracted in 200 components = 0.000793476 Jy ! Clean residual min=-0.001789 max=0.002078 Jy/beam ! Clean residual mean=-0.000025 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.331316 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 314 components and 0.331316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079140Jy sigma=0.000769 ! Fit after self-cal, rms=0.079129Jy sigma=0.000769 wmodel J2339+6010_S_2017_06_10_pus_map.mod ! Writing 314 model components to file: J2339+6010_S_2017_06_10_pus_map.mod wobs J2339+6010_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J2339+6010_S_2017_06_10_pus_uvs.fits wwins J2339+6010_S_2017_06_10_pus_map.win ! wwins: Wrote 7 windows to J2339+6010_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000941248 Jy ! Component: 100 - total flux cleaned = 0.00156284 Jy ! Component: 150 - total flux cleaned = 0.00205618 Jy ! Component: 200 - total flux cleaned = 0.00240563 Jy ! Component: 250 - total flux cleaned = 0.00271292 Jy ! Component: 300 - total flux cleaned = 0.0030111 Jy ! Component: 350 - total flux cleaned = 0.0033888 Jy ! Component: 400 - total flux cleaned = 0.0037292 Jy ! Component: 450 - total flux cleaned = 0.00406232 Jy ! Component: 500 - total flux cleaned = 0.00433463 Jy ! Component: 550 - total flux cleaned = 0.00457506 Jy ! Component: 600 - total flux cleaned = 0.00483794 Jy ! Component: 650 - total flux cleaned = 0.00509607 Jy ! Component: 700 - total flux cleaned = 0.00534955 Jy ! Component: 750 - total flux cleaned = 0.00549923 Jy ! Component: 800 - total flux cleaned = 0.00559808 Jy ! Component: 850 - total flux cleaned = 0.00581772 Jy ! Component: 900 - total flux cleaned = 0.00596223 Jy ! Component: 950 - total flux cleaned = 0.00612832 Jy ! Component: 1000 - total flux cleaned = 0.00626929 Jy ! Component: 1050 - total flux cleaned = 0.00640833 Jy ! Component: 1100 - total flux cleaned = 0.00659204 Jy ! Component: 1150 - total flux cleaned = 0.0067056 Jy ! Component: 1200 - total flux cleaned = 0.00690766 Jy ! Component: 1250 - total flux cleaned = 0.00695218 Jy ! Component: 1300 - total flux cleaned = 0.00717236 Jy ! Component: 1350 - total flux cleaned = 0.00728061 Jy ! Component: 1400 - total flux cleaned = 0.00738824 Jy ! Component: 1450 - total flux cleaned = 0.00747319 Jy ! Component: 1500 - total flux cleaned = 0.007558 Jy ! Component: 1550 - total flux cleaned = 0.00768367 Jy ! Component: 1600 - total flux cleaned = 0.0077871 Jy ! Component: 1650 - total flux cleaned = 0.00780753 Jy ! Component: 1700 - total flux cleaned = 0.00784828 Jy ! Component: 1750 - total flux cleaned = 0.00794876 Jy ! Component: 1800 - total flux cleaned = 0.00790874 Jy ! Component: 1850 - total flux cleaned = 0.00800794 Jy ! Component: 1900 - total flux cleaned = 0.00800775 Jy ! Component: 1950 - total flux cleaned = 0.00808538 Jy ! Component: 2000 - total flux cleaned = 0.00810493 Jy ! Component: 2050 - total flux cleaned = 0.00816222 Jy ! Component: 2100 - total flux cleaned = 0.00818126 Jy ! Component: 2150 - total flux cleaned = 0.00823776 Jy ! Component: 2200 - total flux cleaned = 0.00821899 Jy ! Component: 2250 - total flux cleaned = 0.00831137 Jy ! Component: 2300 - total flux cleaned = 0.00823778 Jy ! Component: 2350 - total flux cleaned = 0.00827419 Jy ! Component: 2400 - total flux cleaned = 0.00827403 Jy ! Component: 2450 - total flux cleaned = 0.00825595 Jy ! Component: 2500 - total flux cleaned = 0.00823792 Jy ! Component: 2550 - total flux cleaned = 0.00820238 Jy ! Component: 2600 - total flux cleaned = 0.00816729 Jy ! Component: 2650 - total flux cleaned = 0.00823745 Jy ! Component: 2700 - total flux cleaned = 0.00818538 Jy ! Component: 2750 - total flux cleaned = 0.00818519 Jy ! Component: 2800 - total flux cleaned = 0.00818525 Jy ! Component: 2850 - total flux cleaned = 0.00818522 Jy ! Component: 2900 - total flux cleaned = 0.00816851 Jy ! Component: 2950 - total flux cleaned = 0.00825247 Jy ! Component: 3000 - total flux cleaned = 0.00816899 Jy ! Component: 3050 - total flux cleaned = 0.00816893 Jy ! Component: 3100 - total flux cleaned = 0.00821864 Jy ! Component: 3150 - total flux cleaned = 0.00816955 Jy ! Component: 3200 - total flux cleaned = 0.00820224 Jy ! Component: 3250 - total flux cleaned = 0.00818602 Jy ! Component: 3300 - total flux cleaned = 0.00828271 Jy ! Component: 3350 - total flux cleaned = 0.00829883 Jy ! Component: 3400 - total flux cleaned = 0.00821917 Jy ! Component: 3450 - total flux cleaned = 0.00818764 Jy ! Component: 3500 - total flux cleaned = 0.00829783 Jy ! Component: 3550 - total flux cleaned = 0.00823519 Jy ! Component: 3600 - total flux cleaned = 0.00821978 Jy ! Component: 3650 - total flux cleaned = 0.00826612 Jy ! Component: 3700 - total flux cleaned = 0.00826625 Jy ! Component: 3750 - total flux cleaned = 0.00825083 Jy ! Component: 3800 - total flux cleaned = 0.00825083 Jy ! Component: 3850 - total flux cleaned = 0.00826591 Jy ! Component: 3900 - total flux cleaned = 0.00822084 Jy ! Component: 3950 - total flux cleaned = 0.00831062 Jy ! Component: 4000 - total flux cleaned = 0.00838497 Jy ! Component: 4050 - total flux cleaned = 0.00829592 Jy ! Total flux subtracted in 4096 components = 0.00835473 Jy ! Clean residual min=-0.000829 max=0.000867 Jy/beam ! Clean residual mean=-0.000016 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.339671 Jy keep ! Adding 396 model components to the UV plane model. ! The established model now contains 710 components and 0.339671 Jy ![Exited script file: muppet] wmap "J2339+6010_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.858 x 4.738 at -6.42 degrees (North through East) ! Clean map min=-0.0014835 max=0.15347 Jy/beam ! Writing clean map to FITS file: J2339+6010_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.153472 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000306224 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.598591 0.598591 1.19718 2.39436 4.78873 9.57746 19.1549 38.3098 76.6197 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.153 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.858 x 4.738 at -6.42 degrees (North through East) ! Clean map min=-0.0014835 max=0.15347 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2339+6010_S_2017_06_10_pus_uvs.log closed on Mon May 6 15:03:47 2019