! Started logfile: J2338+1504_S_2017_10_21_pus_uvs.log on Sat May 11 21:08:28 2019 obs J2338+1504_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2338+1504_S_2017_10_21_pus_uva.fits ! AN table 1: 236 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.708922 visibilities/baseline/integration-bin. ! Found source: J2338+1504 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 24092 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2338+1504_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 353 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 500 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 441 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1244 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996456Jy sigma=0.010556 ! Fit after self-cal, rms=0.963200Jy sigma=0.010229 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=13.04 mas, bpa=-13.12 degrees ! Estimated noise=1071.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0296152 Jy ! Component: 100 - total flux cleaned = 0.0362651 Jy ! Total flux subtracted in 100 components = 0.0362651 Jy ! Clean residual min=-0.003395 max=0.003544 Jy/beam ! Clean residual mean=-0.000003 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.0362651 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0362651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069751Jy sigma=0.000663 ! Fit after self-cal, rms=0.068448Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.09 mas, bmaj=14.85 mas, bpa=-13.87 degrees ! Estimated noise=512.311 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353308 Jy ! Component: 100 - total flux cleaned = 0.00379723 Jy ! Component: 150 - total flux cleaned = 0.00371401 Jy ! Component: 200 - total flux cleaned = 0.00368032 Jy ! Total flux subtracted in 200 components = 0.00368032 Jy ! Clean residual min=-0.003036 max=0.002982 Jy/beam ! Clean residual mean=-0.000003 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0399454 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.0399454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068178Jy sigma=0.000648 ! Fit after self-cal, rms=0.068166Jy sigma=0.000647 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.98 HN 1.02 KP 1.14 ! LA 1.02 MK 1.05 NL 0.95 OV 1.08 ! PT 0.86 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.04 KP 1.16 ! LA 0.98 MK 1.03 NL 1.09 OV 1.07 ! PT 0.84 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 1.07 HN 1.03 KP 1.10 ! LA 0.89 MK 1.08 NL 1.17 OV 1.00 ! PT 0.85 ! ! ! Correcting IF 4. ! A total of 300 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.80 HN 0.83 KP 1.00* ! LA 0.87 MK 0.85 NL 1.00* OV 1.00* ! PT 0.75 ! ! ! Fit before self-cal, rms=0.068166Jy sigma=0.000647 ! Fit after self-cal, rms=0.065515Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.05 mas, bmaj=14.93 mas, bpa=-13.41 degrees ! Estimated noise=517.645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169408 Jy ! Component: 100 - total flux cleaned = -0.000262914 Jy ! Component: 150 - total flux cleaned = -0.000332544 Jy ! Component: 200 - total flux cleaned = -0.000385939 Jy ! Total flux subtracted in 200 components = -0.000385939 Jy ! Clean residual min=-0.001651 max=0.002134 Jy/beam ! Clean residual mean=-0.000000 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0395595 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.0395595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065485Jy sigma=0.000644 ! Fit after self-cal, rms=0.065476Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065476Jy sigma=0.000643 ! Fit after self-cal, rms=0.065946Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.094 mas, bmaj=14.75 mas, bpa=-13.65 degrees ! Estimated noise=518.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383564 Jy ! Component: 100 - total flux cleaned = 0.000371369 Jy ! Component: 150 - total flux cleaned = 0.000339468 Jy ! Component: 200 - total flux cleaned = 0.000330058 Jy ! Total flux subtracted in 200 components = 0.000330058 Jy ! Clean residual min=-0.001231 max=0.001272 Jy/beam ! Clean residual mean=0.000002 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.0398895 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.0398895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065938Jy sigma=0.000641 ! Fit after self-cal, rms=0.066135Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402904 Jy ! Component: 100 - total flux cleaned = 0.000415573 Jy ! Component: 150 - total flux cleaned = 0.000439433 Jy ! Component: 200 - total flux cleaned = 0.000439502 Jy ! Total flux subtracted in 200 components = 0.000439502 Jy ! Clean residual min=-0.001338 max=0.001326 Jy/beam ! Clean residual mean=0.000002 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.040329 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.040329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066128Jy sigma=0.000640 ! Fit after self-cal, rms=0.066137Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066137Jy sigma=0.000640 ! Fit after self-cal, rms=0.067477Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.112 mas, bmaj=14.67 mas, bpa=-13.72 degrees ! Estimated noise=521.892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494872 Jy ! Component: 100 - total flux cleaned = 0.000575132 Jy ! Component: 150 - total flux cleaned = 0.000593384 Jy ! Component: 200 - total flux cleaned = 0.000593551 Jy ! Total flux subtracted in 200 components = 0.000593551 Jy ! Clean residual min=-0.001320 max=0.001328 Jy/beam ! Clean residual mean=0.000002 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0409226 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.0409226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067471Jy sigma=0.000640 ! Fit after self-cal, rms=0.067656Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256454 Jy ! Component: 100 - total flux cleaned = 0.000318702 Jy ! Component: 150 - total flux cleaned = 0.000329391 Jy ! Component: 200 - total flux cleaned = 0.000320143 Jy ! Total flux subtracted in 200 components = 0.000320143 Jy ! Clean residual min=-0.001408 max=0.001261 Jy/beam ! Clean residual mean=0.000002 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0412427 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.0412427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067651Jy sigma=0.000640 ! Fit after self-cal, rms=0.067671Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067671Jy sigma=0.000640 ! Fit after self-cal, rms=0.068745Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.56 mas, bmaj=14.8 mas, bpa=-18.57 degrees ! Estimated noise=594.504 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000392273 Jy ! Component: 100 - total flux cleaned = 0.000516944 Jy ! Component: 150 - total flux cleaned = 0.000540736 Jy ! Component: 200 - total flux cleaned = 0.000559989 Jy ! Total flux subtracted in 200 components = 0.000559989 Jy ! Clean residual min=-0.001444 max=0.001189 Jy/beam ! Clean residual mean=0.000003 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0418027 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.0418027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068742Jy sigma=0.000640 ! Fit after self-cal, rms=0.068871Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129878 Jy ! Component: 100 - total flux cleaned = 0.00017926 Jy ! Component: 150 - total flux cleaned = 0.000221721 Jy ! Component: 200 - total flux cleaned = 0.000248557 Jy ! Total flux subtracted in 200 components = 0.000248557 Jy ! Clean residual min=-0.001500 max=0.001238 Jy/beam ! Clean residual mean=0.000003 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0420513 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.0420513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068870Jy sigma=0.000640 ! Fit after self-cal, rms=0.068881Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.127 mas, bmaj=14.58 mas, bpa=-13.78 degrees ! Estimated noise=525.031 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.127 x 14.58 at -13.78 degrees (North through East) ! Clean map min=-0.0017341 max=0.039813 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=12.44 mas, bpa=-13.19 degrees ! Estimated noise=1073.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306014 Jy ! Component: 100 - total flux cleaned = 0.0375371 Jy ! Component: 150 - total flux cleaned = 0.0397402 Jy ! Component: 200 - total flux cleaned = 0.0405067 Jy ! Total flux subtracted in 200 components = 0.0405067 Jy ! Clean residual min=-0.002473 max=0.002205 Jy/beam ! Clean residual mean=0.000003 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0405067 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0405067 Jy ! Inverting map and beam ! Estimated beam: bmin=4.127 mas, bmaj=14.58 mas, bpa=-13.78 degrees ! Estimated noise=525.031 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556348 Jy ! Component: 100 - total flux cleaned = 0.000915618 Jy ! Component: 150 - total flux cleaned = 0.00110265 Jy ! Component: 200 - total flux cleaned = 0.00123384 Jy ! Total flux subtracted in 200 components = 0.00123384 Jy ! Clean residual min=-0.001434 max=0.001258 Jy/beam ! Clean residual mean=0.000003 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0417405 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.0417405 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.56 mas, bmaj=14.8 mas, bpa=-18.57 degrees ! Estimated noise=594.504 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166558 Jy ! Component: 100 - total flux cleaned = 0.000218579 Jy ! Component: 150 - total flux cleaned = 0.000255169 Jy ! Component: 200 - total flux cleaned = 0.00028767 Jy ! Total flux subtracted in 200 components = 0.00028767 Jy ! Clean residual min=-0.001477 max=0.001242 Jy/beam ! Clean residual mean=0.000004 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0420282 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.87832e-05 Jy ! Component: 100 - total flux cleaned = 4.8435e-05 Jy ! Component: 150 - total flux cleaned = 6.68107e-05 Jy ! Component: 200 - total flux cleaned = 7.85516e-05 Jy ! Total flux subtracted in 200 components = 7.85516e-05 Jy ! Clean residual min=-0.001477 max=0.001248 Jy/beam ! Clean residual mean=0.000003 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0421067 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 55 components and 0.0421068 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.127 mas, bmaj=14.58 mas, bpa=-13.78 degrees ! Estimated noise=525.031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.04768e-05 Jy ! Component: 100 - total flux cleaned = -8.15723e-05 Jy ! Component: 150 - total flux cleaned = -8.13804e-05 Jy ! Component: 200 - total flux cleaned = -8.11676e-05 Jy ! Total flux subtracted in 200 components = -8.11676e-05 Jy ! Clean residual min=-0.001452 max=0.001256 Jy/beam ! Clean residual mean=0.000002 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0420256 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.0420256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068889Jy sigma=0.000640 ! Fit after self-cal, rms=0.068897Jy sigma=0.000640 wmodel J2338+1504_S_2017_10_21_pus_map.mod ! Writing 63 model components to file: J2338+1504_S_2017_10_21_pus_map.mod wobs J2338+1504_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2338+1504_S_2017_10_21_pus_uvs.fits wwins J2338+1504_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2338+1504_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010834 Jy ! Component: 100 - total flux cleaned = 6.45348e-05 Jy ! Component: 150 - total flux cleaned = 0.000165885 Jy ! Component: 200 - total flux cleaned = 0.000242387 Jy ! Component: 250 - total flux cleaned = 0.000313908 Jy ! Component: 300 - total flux cleaned = 0.00034841 Jy ! Component: 350 - total flux cleaned = 0.000365017 Jy ! Component: 400 - total flux cleaned = 0.00033271 Jy ! Component: 450 - total flux cleaned = 0.000286336 Jy ! Component: 500 - total flux cleaned = 0.000241483 Jy ! Component: 550 - total flux cleaned = 0.000183554 Jy ! Component: 600 - total flux cleaned = 0.000183487 Jy ! Component: 650 - total flux cleaned = 0.000169658 Jy ! Component: 700 - total flux cleaned = 0.000209588 Jy ! Component: 750 - total flux cleaned = 0.000170592 Jy ! Component: 800 - total flux cleaned = 0.000221607 Jy ! Component: 850 - total flux cleaned = 0.000221747 Jy ! Component: 900 - total flux cleaned = 0.000209739 Jy ! Component: 950 - total flux cleaned = 0.000233348 Jy ! Component: 1000 - total flux cleaned = 0.000221774 Jy ! Component: 1050 - total flux cleaned = 0.000199003 Jy ! Component: 1100 - total flux cleaned = 0.000187892 Jy ! Component: 1150 - total flux cleaned = 0.000177096 Jy ! Component: 1200 - total flux cleaned = 0.000198587 Jy ! Component: 1250 - total flux cleaned = 0.000187757 Jy ! Component: 1300 - total flux cleaned = 0.000177229 Jy ! Component: 1350 - total flux cleaned = 0.000167097 Jy ! Component: 1400 - total flux cleaned = 0.000147037 Jy ! Component: 1450 - total flux cleaned = 0.000167004 Jy ! Component: 1500 - total flux cleaned = 0.000186462 Jy ! Component: 1550 - total flux cleaned = 0.000176818 Jy ! Component: 1600 - total flux cleaned = 0.000148612 Jy ! Component: 1650 - total flux cleaned = 0.000176738 Jy ! Component: 1700 - total flux cleaned = 0.000222648 Jy ! Component: 1750 - total flux cleaned = 0.000222655 Jy ! Component: 1800 - total flux cleaned = 0.000213806 Jy ! Component: 1850 - total flux cleaned = 0.000240341 Jy ! Component: 1900 - total flux cleaned = 0.000222837 Jy ! Component: 1950 - total flux cleaned = 0.000248771 Jy ! Component: 2000 - total flux cleaned = 0.000214682 Jy ! Component: 2050 - total flux cleaned = 0.000231613 Jy ! Component: 2100 - total flux cleaned = 0.00021498 Jy ! Component: 2150 - total flux cleaned = 0.000206776 Jy ! Component: 2200 - total flux cleaned = 0.000198789 Jy ! Component: 2250 - total flux cleaned = 0.000214919 Jy ! Component: 2300 - total flux cleaned = 0.000183037 Jy ! Component: 2350 - total flux cleaned = 0.000175226 Jy ! Component: 2400 - total flux cleaned = 0.000175372 Jy ! Component: 2450 - total flux cleaned = 0.000152172 Jy ! Component: 2500 - total flux cleaned = 0.000114054 Jy ! Component: 2550 - total flux cleaned = 9.89122e-05 Jy ! Component: 2600 - total flux cleaned = 8.38554e-05 Jy ! Component: 2650 - total flux cleaned = 4.66408e-05 Jy ! Component: 2700 - total flux cleaned = 2.45727e-05 Jy ! Component: 2750 - total flux cleaned = 1.72579e-05 Jy ! Component: 2800 - total flux cleaned = 1.72137e-05 Jy ! Component: 2850 - total flux cleaned = 1.71652e-05 Jy ! Component: 2900 - total flux cleaned = -4.32965e-06 Jy ! Component: 2950 - total flux cleaned = -1.84362e-05 Jy ! Component: 3000 - total flux cleaned = 2.65965e-06 Jy ! Component: 3050 - total flux cleaned = 2.68224e-06 Jy ! Component: 3100 - total flux cleaned = 9.56668e-06 Jy ! Component: 3150 - total flux cleaned = -1.10559e-05 Jy ! Component: 3200 - total flux cleaned = -2.46702e-05 Jy ! Component: 3250 - total flux cleaned = -4.34485e-06 Jy ! Component: 3300 - total flux cleaned = -1.78102e-05 Jy ! Component: 3350 - total flux cleaned = -3.78614e-05 Jy ! Component: 3400 - total flux cleaned = -3.1177e-05 Jy ! Component: 3450 - total flux cleaned = -3.77653e-05 Jy ! Component: 3500 - total flux cleaned = -4.42914e-05 Jy ! Component: 3550 - total flux cleaned = -5.07553e-05 Jy ! Component: 3600 - total flux cleaned = -5.07003e-05 Jy ! Component: 3650 - total flux cleaned = -5.7185e-05 Jy ! Component: 3700 - total flux cleaned = -5.72438e-05 Jy ! Component: 3750 - total flux cleaned = -5.09189e-05 Jy ! Component: 3800 - total flux cleaned = -5.72698e-05 Jy ! Component: 3850 - total flux cleaned = -5.09717e-05 Jy ! Component: 3900 - total flux cleaned = -3.22174e-05 Jy ! Component: 3950 - total flux cleaned = -2.59467e-05 Jy ! Component: 4000 - total flux cleaned = -1.1822e-06 Jy ! Component: 4050 - total flux cleaned = 1.11579e-05 Jy ! Total flux subtracted in 4096 components = 2.34174e-05 Jy ! Clean residual min=-0.000363 max=0.000353 Jy/beam ! Clean residual mean=0.000000 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.042049 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 333 components and 0.042049 Jy ![Exited script file: muppet] wmap "J2338+1504_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.127 x 14.58 at -13.78 degrees (North through East) ! Clean map min=-0.001238 max=0.03995 Jy/beam ! Writing clean map to FITS file: J2338+1504_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0399503 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000112505 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.844838 0.844838 1.68968 3.37935 6.7587 13.5174 27.0348 54.0696 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.039 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.127 x 14.58 at -13.78 degrees (North through East) ! Clean map min=-0.001238 max=0.03995 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2338+1504_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:08:33 2019