! Started logfile: J2338+1504_S_2017_04_28_pus_uvs.log on Thu May 2 16:35:46 2019 obs J2338+1504_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J2338+1504_S_2017_04_28_pus_uva.fits ! AN table 1: 302 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9844 visibilities/baseline/integration-bin. ! Found source: J2338+1504 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 53512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2338+1504_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1233 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001809Jy sigma=0.025363 ! Fit after self-cal, rms=0.967281Jy sigma=0.025184 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.379 mas, bpa=-9.613 degrees ! Estimated noise=546.105 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199254 Jy ! Component: 100 - total flux cleaned = 0.0210652 Jy ! Total flux subtracted in 100 components = 0.0210652 Jy ! Clean residual min=-0.005898 max=0.006047 Jy/beam ! Clean residual mean=-0.000018 rms=0.001774 Jy/beam ! Combined flux in latest and established models = 0.0210652 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0210652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085665Jy sigma=0.000816 ! Fit after self-cal, rms=0.084593Jy sigma=0.000783 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=8.013 mas, bpa=-7.96 degrees ! Estimated noise=289.682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489599 Jy ! Component: 100 - total flux cleaned = 0.00437243 Jy ! Component: 150 - total flux cleaned = 0.00383893 Jy ! Component: 200 - total flux cleaned = 0.00331242 Jy ! Total flux subtracted in 200 components = 0.00331242 Jy ! Clean residual min=-0.005150 max=0.005212 Jy/beam ! Clean residual mean=0.000013 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.0243776 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.0243776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083544Jy sigma=0.000847 ! Fit after self-cal, rms=0.083483Jy sigma=0.000846 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.88 HN 0.86 KP 0.84 ! LA 0.72 MK 0.86 NL 0.82 OV 0.91 ! PT 0.91 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.82 HN 0.91 KP 0.79 ! LA 0.65 MK 0.84 NL 0.90 OV 0.93 ! PT 0.92 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.87 HN 0.89 KP 0.84 ! LA 0.65 MK 0.91 NL 0.88 OV 0.83 ! PT 0.93 SC 0.87 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.98 KP 1.00* ! LA 8.08 MK 0.99 NL 1.00* OV 1.00* ! PT 1.16 SC 1.00* ! ! ! Fit before self-cal, rms=0.083483Jy sigma=0.000846 ! Fit after self-cal, rms=0.135010Jy sigma=0.000630 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=7.575 mas, bpa=-5.095 degrees ! Estimated noise=292.146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (54, 97.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143081 Jy ! Component: 100 - total flux cleaned = 0.00205701 Jy ! Component: 150 - total flux cleaned = 0.00239845 Jy ! Component: 200 - total flux cleaned = 0.00273892 Jy ! Total flux subtracted in 200 components = 0.00273892 Jy ! Clean residual min=-0.001167 max=0.001111 Jy/beam ! Clean residual mean=-0.000007 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.0271165 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 27 components and 0.0271165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134925Jy sigma=0.000630 ! Fit after self-cal, rms=0.134817Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134817Jy sigma=0.000627 ! Fit after self-cal, rms=0.191918Jy sigma=0.000624 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=7.533 mas, bpa=-5.699 degrees ! Estimated noise=286.876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00042129 Jy ! Component: 100 - total flux cleaned = 0.000578673 Jy ! Component: 150 - total flux cleaned = 0.000621522 Jy ! Component: 200 - total flux cleaned = 0.000647518 Jy ! Total flux subtracted in 200 components = 0.000647518 Jy ! Clean residual min=-0.000797 max=0.000781 Jy/beam ! Clean residual mean=-0.000003 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.027764 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 50 components and 0.027764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191897Jy sigma=0.000624 ! Fit after self-cal, rms=0.191897Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138688 Jy ! Component: 100 - total flux cleaned = -8.3384e-05 Jy ! Component: 150 - total flux cleaned = -3.52356e-05 Jy ! Component: 200 - total flux cleaned = -1.34668e-05 Jy ! Total flux subtracted in 200 components = -1.34668e-05 Jy ! Clean residual min=-0.000824 max=0.000784 Jy/beam ! Clean residual mean=-0.000002 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0277506 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 69 components and 0.0277506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191887Jy sigma=0.000623 ! Fit after self-cal, rms=0.191886Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191886Jy sigma=0.000623 ! Fit after self-cal, rms=0.055067Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=7.521 mas, bpa=-5.438 degrees ! Estimated noise=286.136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177489 Jy ! Component: 100 - total flux cleaned = -0.00016479 Jy ! Component: 150 - total flux cleaned = -0.000140569 Jy ! Component: 200 - total flux cleaned = -0.000118469 Jy ! Total flux subtracted in 200 components = -0.000118469 Jy ! Clean residual min=-0.000678 max=0.000711 Jy/beam ! Clean residual mean=-0.000001 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0276321 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.0276321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055060Jy sigma=0.000622 ! Fit after self-cal, rms=0.055009Jy sigma=0.000621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277354 Jy ! Component: 100 - total flux cleaned = -0.000242487 Jy ! Component: 150 - total flux cleaned = -0.000189493 Jy ! Component: 200 - total flux cleaned = -0.000170715 Jy ! Total flux subtracted in 200 components = -0.000170715 Jy ! Clean residual min=-0.000764 max=0.000699 Jy/beam ! Clean residual mean=-0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.0274614 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.0274614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055004Jy sigma=0.000621 ! Fit after self-cal, rms=0.054996Jy sigma=0.000621 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054996Jy sigma=0.000621 ! Fit after self-cal, rms=0.055130Jy sigma=0.000621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.401 mas, bmaj=10.49 mas, bpa=-3.332 degrees ! Estimated noise=352.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001866 Jy ! Component: 100 - total flux cleaned = -0.000221169 Jy ! Component: 150 - total flux cleaned = -0.000249309 Jy ! Component: 200 - total flux cleaned = -0.000267423 Jy ! Total flux subtracted in 200 components = -0.000267423 Jy ! Clean residual min=-0.000737 max=0.000662 Jy/beam ! Clean residual mean=-0.000000 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.027194 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 94 components and 0.027194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055129Jy sigma=0.000621 ! Fit after self-cal, rms=0.055131Jy sigma=0.000621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000179375 Jy ! Component: 100 - total flux cleaned = -0.000199897 Jy ! Component: 150 - total flux cleaned = -0.000216921 Jy ! Component: 200 - total flux cleaned = -0.0002318 Jy ! Total flux subtracted in 200 components = -0.0002318 Jy ! Clean residual min=-0.000725 max=0.000659 Jy/beam ! Clean residual mean=-0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.0269622 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.0269622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055130Jy sigma=0.000621 ! Fit after self-cal, rms=0.055130Jy sigma=0.000621 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=7.514 mas, bpa=-5.298 degrees ! Estimated noise=286.577 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.346 x 7.514 at -5.298 degrees (North through East) ! Clean map min=-0.0013584 max=0.03 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=6.779 mas, bpa=-6.938 degrees ! Estimated noise=557.818 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243577 Jy ! Component: 100 - total flux cleaned = 0.0287465 Jy ! Component: 150 - total flux cleaned = 0.0289841 Jy ! Component: 200 - total flux cleaned = 0.0289138 Jy ! Total flux subtracted in 200 components = 0.0289138 Jy ! Clean residual min=-0.001552 max=0.001446 Jy/beam ! Clean residual mean=-0.000000 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0289138 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0289138 Jy ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=7.514 mas, bpa=-5.298 degrees ! Estimated noise=286.577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000626405 Jy ! Component: 100 - total flux cleaned = -0.000834333 Jy ! Component: 150 - total flux cleaned = -0.00102294 Jy ! Component: 200 - total flux cleaned = -0.00115478 Jy ! Total flux subtracted in 200 components = -0.00115478 Jy ! Clean residual min=-0.000781 max=0.000697 Jy/beam ! Clean residual mean=0.000000 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.027759 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.027759 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.401 mas, bmaj=10.49 mas, bpa=-3.332 degrees ! Estimated noise=352.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000591702 Jy ! Component: 100 - total flux cleaned = -0.000783293 Jy ! Component: 150 - total flux cleaned = -0.00080695 Jy ! Component: 200 - total flux cleaned = -0.000827732 Jy ! Total flux subtracted in 200 components = -0.000827732 Jy ! Clean residual min=-0.000772 max=0.000650 Jy/beam ! Clean residual mean=-0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0269313 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.85875e-05 Jy ! Component: 100 - total flux cleaned = -3.52948e-05 Jy ! Component: 150 - total flux cleaned = -5.72278e-05 Jy ! Component: 200 - total flux cleaned = -8.37696e-05 Jy ! Total flux subtracted in 200 components = -8.37696e-05 Jy ! Clean residual min=-0.000752 max=0.000647 Jy/beam ! Clean residual mean=-0.000000 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0268475 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 66 components and 0.0268475 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=7.514 mas, bpa=-5.298 degrees ! Estimated noise=286.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272122 Jy ! Component: 100 - total flux cleaned = 0.000316052 Jy ! Component: 150 - total flux cleaned = 0.000280192 Jy ! Component: 200 - total flux cleaned = 0.000258457 Jy ! Total flux subtracted in 200 components = 0.000258457 Jy ! Clean residual min=-0.000724 max=0.000682 Jy/beam ! Clean residual mean=-0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0271059 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.0271059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055128Jy sigma=0.000621 ! Fit after self-cal, rms=0.055133Jy sigma=0.000621 wmodel J2338+1504_S_2017_04_28_pus_map.mod ! Writing 80 model components to file: J2338+1504_S_2017_04_28_pus_map.mod wobs J2338+1504_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J2338+1504_S_2017_04_28_pus_uvs.fits wwins J2338+1504_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J2338+1504_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013238 Jy ! Component: 100 - total flux cleaned = -0.00014447 Jy ! Component: 150 - total flux cleaned = -0.000144415 Jy ! Component: 200 - total flux cleaned = -0.000166238 Jy ! Component: 250 - total flux cleaned = -0.000166148 Jy ! Component: 300 - total flux cleaned = -0.000155813 Jy ! Component: 350 - total flux cleaned = -0.000165936 Jy ! Component: 400 - total flux cleaned = -0.000186028 Jy ! Component: 450 - total flux cleaned = -0.000196036 Jy ! Component: 500 - total flux cleaned = -0.000225322 Jy ! Component: 550 - total flux cleaned = -0.000282199 Jy ! Component: 600 - total flux cleaned = -0.000300758 Jy ! Component: 650 - total flux cleaned = -0.000328281 Jy ! Component: 700 - total flux cleaned = -0.000373317 Jy ! Component: 750 - total flux cleaned = -0.000426583 Jy ! Component: 800 - total flux cleaned = -0.000452804 Jy ! Component: 850 - total flux cleaned = -0.000461546 Jy ! Component: 900 - total flux cleaned = -0.000504146 Jy ! Component: 950 - total flux cleaned = -0.000512605 Jy ! Component: 1000 - total flux cleaned = -0.000520957 Jy ! Component: 1050 - total flux cleaned = -0.000504625 Jy ! Component: 1100 - total flux cleaned = -0.00052095 Jy ! Component: 1150 - total flux cleaned = -0.000544857 Jy ! Component: 1200 - total flux cleaned = -0.000544778 Jy ! Component: 1250 - total flux cleaned = -0.000552589 Jy ! Component: 1300 - total flux cleaned = -0.000575617 Jy ! Component: 1350 - total flux cleaned = -0.000583185 Jy ! Component: 1400 - total flux cleaned = -0.000583176 Jy ! Component: 1450 - total flux cleaned = -0.000568211 Jy ! Component: 1500 - total flux cleaned = -0.000590385 Jy ! Component: 1550 - total flux cleaned = -0.000568456 Jy ! Component: 1600 - total flux cleaned = -0.00056122 Jy ! Component: 1650 - total flux cleaned = -0.000575488 Jy ! Component: 1700 - total flux cleaned = -0.000547042 Jy ! Component: 1750 - total flux cleaned = -0.000554118 Jy ! Component: 1800 - total flux cleaned = -0.000554208 Jy ! Component: 1850 - total flux cleaned = -0.000567967 Jy ! Component: 1900 - total flux cleaned = -0.000506464 Jy ! Component: 1950 - total flux cleaned = -0.000547153 Jy ! Component: 2000 - total flux cleaned = -0.000526873 Jy ! Component: 2050 - total flux cleaned = -0.000506772 Jy ! Component: 2100 - total flux cleaned = -0.000513422 Jy ! Component: 2150 - total flux cleaned = -0.0004873 Jy ! Component: 2200 - total flux cleaned = -0.000474293 Jy ! Component: 2250 - total flux cleaned = -0.000480621 Jy ! Component: 2300 - total flux cleaned = -0.000442353 Jy ! Component: 2350 - total flux cleaned = -0.000461364 Jy ! Component: 2400 - total flux cleaned = -0.000436279 Jy ! Component: 2450 - total flux cleaned = -0.000429988 Jy ! Component: 2500 - total flux cleaned = -0.000436197 Jy ! Component: 2550 - total flux cleaned = -0.000423891 Jy ! Component: 2600 - total flux cleaned = -0.000436102 Jy ! Component: 2650 - total flux cleaned = -0.000423963 Jy ! Component: 2700 - total flux cleaned = -0.000423933 Jy ! Component: 2750 - total flux cleaned = -0.000423926 Jy ! Component: 2800 - total flux cleaned = -0.000423944 Jy ! Component: 2850 - total flux cleaned = -0.000429878 Jy ! Component: 2900 - total flux cleaned = -0.000400588 Jy ! Component: 2950 - total flux cleaned = -0.000400673 Jy ! Component: 3000 - total flux cleaned = -0.000412213 Jy ! Component: 3050 - total flux cleaned = -0.000400741 Jy ! Component: 3100 - total flux cleaned = -0.000389257 Jy ! Component: 3150 - total flux cleaned = -0.00037225 Jy ! Component: 3200 - total flux cleaned = -0.000400403 Jy ! Component: 3250 - total flux cleaned = -0.000383659 Jy ! Component: 3300 - total flux cleaned = -0.000378128 Jy ! Component: 3350 - total flux cleaned = -0.000361529 Jy ! Component: 3400 - total flux cleaned = -0.000345138 Jy ! Component: 3450 - total flux cleaned = -0.00032876 Jy ! Component: 3500 - total flux cleaned = -0.000323332 Jy ! Component: 3550 - total flux cleaned = -0.000339515 Jy ! Component: 3600 - total flux cleaned = -0.000307346 Jy ! Component: 3650 - total flux cleaned = -0.000323319 Jy ! Component: 3700 - total flux cleaned = -0.000318013 Jy ! Component: 3750 - total flux cleaned = -0.000307462 Jy ! Component: 3800 - total flux cleaned = -0.000302234 Jy ! Component: 3850 - total flux cleaned = -0.000291834 Jy ! Component: 3900 - total flux cleaned = -0.000328071 Jy ! Component: 3950 - total flux cleaned = -0.000302332 Jy ! Component: 4000 - total flux cleaned = -0.000317675 Jy ! Component: 4050 - total flux cleaned = -0.000317634 Jy ! Total flux subtracted in 4096 components = -0.000312631 Jy ! Clean residual min=-0.000291 max=0.000313 Jy/beam ! Clean residual mean=-0.000001 rms=0.000095 Jy/beam ! Combined flux in latest and established models = 0.0267933 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 397 components and 0.0267933 Jy ![Exited script file: muppet] wmap "J2338+1504_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.346 x 7.514 at -5.298 degrees (North through East) ! Clean map min=-0.0014024 max=0.029851 Jy/beam ! Writing clean map to FITS file: J2338+1504_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0298513 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.51994e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.956736 0.956736 1.91347 3.82694 7.65389 15.3078 30.6156 61.2311 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.029 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.346 x 7.514 at -5.298 degrees (North through East) ! Clean map min=-0.0014024 max=0.029851 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2338+1504_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:35:52 2019