! Started logfile: J2336-4115_S_2017_10_21_pus_uvs.log on Sat May 11 21:08:23 2019 obs J2336-4115_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2336-4115_S_2017_10_21_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.380342 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2336-4115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2336-4115_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.670223Jy sigma=0.004795 ! Fit after self-cal, rms=0.637441Jy sigma=0.004544 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=35.94 mas, bpa=-14.15 degrees ! Estimated noise=4967.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.269424 Jy ! Component: 100 - total flux cleaned = 0.341802 Jy ! Total flux subtracted in 100 components = 0.341802 Jy ! Clean residual min=-0.024001 max=0.037489 Jy/beam ! Clean residual mean=-0.000145 rms=0.009397 Jy/beam ! Combined flux in latest and established models = 0.341802 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.341802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149947Jy sigma=0.000946 ! Fit after self-cal, rms=0.149930Jy sigma=0.000946 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=35.35 mas, bpa=-14.13 degrees ! Estimated noise=4337.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047605 Jy ! Component: 100 - total flux cleaned = 0.0671675 Jy ! Component: 150 - total flux cleaned = 0.0749914 Jy ! Component: 200 - total flux cleaned = 0.075829 Jy ! Total flux subtracted in 200 components = 0.075829 Jy ! Clean residual min=-0.016317 max=0.016791 Jy/beam ! Clean residual mean=0.000425 rms=0.005458 Jy/beam ! Combined flux in latest and established models = 0.417631 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 58 components and 0.417631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133419Jy sigma=0.000853 ! Fit after self-cal, rms=0.133385Jy sigma=0.000853 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.05 ! LA 0.98 MK 0.94 NL 1.00* OV 1.01 ! PT 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.01 ! LA 0.93 MK 1.01 NL 1.00* OV 1.04 ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.96 ! LA 0.74 MK 1.06 NL 1.00* OV 0.95 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00* KP 1.00* ! LA 2.92 MK 0.99 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.133385Jy sigma=0.000853 ! Fit after self-cal, rms=0.114845Jy sigma=0.000704 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=34.79 mas, bpa=-14.12 degrees ! Estimated noise=4370.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154585 Jy ! Component: 100 - total flux cleaned = 0.00168486 Jy ! Component: 150 - total flux cleaned = 0.00181082 Jy ! Component: 200 - total flux cleaned = 0.00192517 Jy ! Total flux subtracted in 200 components = 0.00192517 Jy ! Clean residual min=-0.007462 max=0.005668 Jy/beam ! Clean residual mean=0.000001 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 0.419556 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 65 components and 0.419556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114730Jy sigma=0.000703 ! Fit after self-cal, rms=0.115592Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115592Jy sigma=0.000702 ! Fit after self-cal, rms=0.116202Jy sigma=0.000702 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=34.75 mas, bpa=-14.12 degrees ! Estimated noise=4372.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000763666 Jy ! Component: 100 - total flux cleaned = 0.000949352 Jy ! Component: 150 - total flux cleaned = 0.00110929 Jy ! Component: 200 - total flux cleaned = 0.00130819 Jy ! Total flux subtracted in 200 components = 0.00130819 Jy ! Clean residual min=-0.007239 max=0.005800 Jy/beam ! Clean residual mean=-0.000015 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 0.420864 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.420864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116109Jy sigma=0.000702 ! Fit after self-cal, rms=0.116138Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253892 Jy ! Component: 100 - total flux cleaned = 0.000349885 Jy ! Component: 150 - total flux cleaned = 0.000435789 Jy ! Component: 200 - total flux cleaned = 0.000520985 Jy ! Total flux subtracted in 200 components = 0.000520985 Jy ! Clean residual min=-0.007138 max=0.005831 Jy/beam ! Clean residual mean=-0.000009 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.421385 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 76 components and 0.421385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116072Jy sigma=0.000702 ! Fit after self-cal, rms=0.116084Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116084Jy sigma=0.000702 ! Fit after self-cal, rms=0.116345Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=34.72 mas, bpa=-14.12 degrees ! Estimated noise=4374.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474464 Jy ! Component: 100 - total flux cleaned = 0.000705746 Jy ! Component: 150 - total flux cleaned = 0.000834765 Jy ! Component: 200 - total flux cleaned = 0.000958594 Jy ! Total flux subtracted in 200 components = 0.000958594 Jy ! Clean residual min=-0.007232 max=0.006021 Jy/beam ! Clean residual mean=-0.000023 rms=0.001904 Jy/beam ! Combined flux in latest and established models = 0.422344 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 0.422344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116277Jy sigma=0.000701 ! Fit after self-cal, rms=0.116280Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203573 Jy ! Component: 100 - total flux cleaned = 0.000282147 Jy ! Component: 150 - total flux cleaned = 0.000389988 Jy ! Component: 200 - total flux cleaned = 0.000459312 Jy ! Total flux subtracted in 200 components = 0.000459312 Jy ! Clean residual min=-0.007148 max=0.006037 Jy/beam ! Clean residual mean=-0.000018 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.422803 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.422803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116230Jy sigma=0.000701 ! Fit after self-cal, rms=0.116238Jy sigma=0.000701 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116238Jy sigma=0.000701 ! Fit after self-cal, rms=0.116468Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.83 mas, bmaj=41.09 mas, bpa=-1.922 degrees ! Estimated noise=5555.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342082 Jy ! Component: 100 - total flux cleaned = 0.000405534 Jy ! Component: 150 - total flux cleaned = 0.000555291 Jy ! Component: 200 - total flux cleaned = 0.000640867 Jy ! Total flux subtracted in 200 components = 0.000640867 Jy ! Clean residual min=-0.005273 max=0.005005 Jy/beam ! Clean residual mean=-0.000055 rms=0.001961 Jy/beam ! Combined flux in latest and established models = 0.423444 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 111 components and 0.423444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116430Jy sigma=0.000701 ! Fit after self-cal, rms=0.116438Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121896 Jy ! Component: 100 - total flux cleaned = 0.000120049 Jy ! Component: 150 - total flux cleaned = 0.000168004 Jy ! Component: 200 - total flux cleaned = 0.000190937 Jy ! Total flux subtracted in 200 components = 0.000190937 Jy ! Clean residual min=-0.005207 max=0.005002 Jy/beam ! Clean residual mean=-0.000051 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 0.423635 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 130 components and 0.423635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116406Jy sigma=0.000701 ! Fit after self-cal, rms=0.116412Jy sigma=0.000701 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=34.69 mas, bpa=-14.12 degrees ! Estimated noise=4375.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.256 x 34.69 at -14.12 degrees (North through East) ! Clean map min=-0.0069007 max=0.31914 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=35.43 mas, bpa=-14.14 degrees ! Estimated noise=5079.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273805 Jy ! Component: 100 - total flux cleaned = 0.342149 Jy ! Component: 150 - total flux cleaned = 0.375901 Jy ! Component: 200 - total flux cleaned = 0.393927 Jy ! Total flux subtracted in 200 components = 0.393927 Jy ! Clean residual min=-0.011027 max=0.008666 Jy/beam ! Clean residual mean=-0.000143 rms=0.003361 Jy/beam ! Combined flux in latest and established models = 0.393927 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.393927 Jy ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=34.69 mas, bpa=-14.12 degrees ! Estimated noise=4375.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127539 Jy ! Component: 100 - total flux cleaned = 0.0190455 Jy ! Component: 150 - total flux cleaned = 0.0223146 Jy ! Component: 200 - total flux cleaned = 0.0234192 Jy ! Total flux subtracted in 200 components = 0.0234192 Jy ! Clean residual min=-0.008731 max=0.006132 Jy/beam ! Clean residual mean=-0.000102 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 0.417346 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 62 components and 0.417346 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.83 mas, bmaj=41.09 mas, bpa=-1.922 degrees ! Estimated noise=5555.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139051 Jy ! Component: 100 - total flux cleaned = 0.00133209 Jy ! Component: 150 - total flux cleaned = 0.00127813 Jy ! Component: 200 - total flux cleaned = 0.00127944 Jy ! Total flux subtracted in 200 components = 0.00127944 Jy ! Clean residual min=-0.006600 max=0.005238 Jy/beam ! Clean residual mean=-0.000154 rms=0.002324 Jy/beam ! Combined flux in latest and established models = 0.418626 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.6874e-05 Jy ! Component: 100 - total flux cleaned = 8.84225e-05 Jy ! Component: 150 - total flux cleaned = 0.000127123 Jy ! Component: 200 - total flux cleaned = 0.000166762 Jy ! Total flux subtracted in 200 components = 0.000166762 Jy ! Clean residual min=-0.006462 max=0.005277 Jy/beam ! Clean residual mean=-0.000152 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.418792 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 82 components and 0.418792 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=34.69 mas, bpa=-14.12 degrees ! Estimated noise=4375.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.47972e-05 Jy ! Component: 100 - total flux cleaned = 7.7144e-05 Jy ! Component: 150 - total flux cleaned = 0.000123596 Jy ! Component: 200 - total flux cleaned = 0.000202046 Jy ! Total flux subtracted in 200 components = 0.000202046 Jy ! Clean residual min=-0.008093 max=0.005786 Jy/beam ! Clean residual mean=-0.000086 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 0.418994 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 107 components and 0.418994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116565Jy sigma=0.000702 ! Fit after self-cal, rms=0.116519Jy sigma=0.000702 wmodel J2336-4115_S_2017_10_21_pus_map.mod ! Writing 107 model components to file: J2336-4115_S_2017_10_21_pus_map.mod wobs J2336-4115_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2336-4115_S_2017_10_21_pus_uvs.fits wwins J2336-4115_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2336-4115_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00321911 Jy ! Component: 100 - total flux cleaned = -0.00484225 Jy ! Component: 150 - total flux cleaned = -0.00600043 Jy ! Component: 200 - total flux cleaned = -0.00679736 Jy ! Component: 250 - total flux cleaned = -0.00745262 Jy ! Component: 300 - total flux cleaned = -0.00812184 Jy ! Component: 350 - total flux cleaned = -0.00879614 Jy ! Component: 400 - total flux cleaned = -0.00897016 Jy ! Component: 450 - total flux cleaned = -0.00886748 Jy ! Component: 500 - total flux cleaned = -0.00846931 Jy ! Component: 550 - total flux cleaned = -0.00832738 Jy ! Component: 600 - total flux cleaned = -0.00823452 Jy ! Component: 650 - total flux cleaned = -0.00810267 Jy ! Component: 700 - total flux cleaned = -0.00810129 Jy ! Component: 750 - total flux cleaned = -0.0080602 Jy ! Component: 800 - total flux cleaned = -0.00802069 Jy ! Component: 850 - total flux cleaned = -0.00805809 Jy ! Component: 900 - total flux cleaned = -0.00798336 Jy ! Component: 950 - total flux cleaned = -0.00798351 Jy ! Component: 1000 - total flux cleaned = -0.00798311 Jy ! Component: 1050 - total flux cleaned = -0.00798308 Jy ! Component: 1100 - total flux cleaned = -0.00808851 Jy ! Component: 1150 - total flux cleaned = -0.00808862 Jy ! Component: 1200 - total flux cleaned = -0.00822656 Jy ! Component: 1250 - total flux cleaned = -0.00829465 Jy ! Component: 1300 - total flux cleaned = -0.00836262 Jy ! Component: 1350 - total flux cleaned = -0.00843029 Jy ! Component: 1400 - total flux cleaned = -0.0085307 Jy ! Component: 1450 - total flux cleaned = -0.00863083 Jy ! Component: 1500 - total flux cleaned = -0.00876385 Jy ! Component: 1550 - total flux cleaned = -0.00889609 Jy ! Component: 1600 - total flux cleaned = -0.00902805 Jy ! Component: 1650 - total flux cleaned = -0.00902825 Jy ! Component: 1700 - total flux cleaned = -0.00896216 Jy ! Component: 1750 - total flux cleaned = -0.00892931 Jy ! Component: 1800 - total flux cleaned = -0.00873003 Jy ! Component: 1850 - total flux cleaned = -0.00859662 Jy ! Component: 1900 - total flux cleaned = -0.00856316 Jy ! Component: 1950 - total flux cleaned = -0.00852951 Jy ! Component: 2000 - total flux cleaned = -0.00846176 Jy ! Component: 2050 - total flux cleaned = -0.00842761 Jy ! Component: 2100 - total flux cleaned = -0.00828999 Jy ! Component: 2150 - total flux cleaned = -0.00832475 Jy ! Component: 2200 - total flux cleaned = -0.00822037 Jy ! Component: 2250 - total flux cleaned = -0.00811497 Jy ! Component: 2300 - total flux cleaned = -0.00804386 Jy ! Component: 2350 - total flux cleaned = -0.00800768 Jy ! Component: 2400 - total flux cleaned = -0.00789676 Jy ! Component: 2450 - total flux cleaned = -0.00782061 Jy ! Component: 2500 - total flux cleaned = -0.00774254 Jy ! Component: 2550 - total flux cleaned = -0.00766282 Jy ! Component: 2600 - total flux cleaned = -0.00753956 Jy ! Component: 2650 - total flux cleaned = -0.00741348 Jy ! Component: 2700 - total flux cleaned = -0.00728351 Jy ! Component: 2750 - total flux cleaned = -0.00714892 Jy ! Component: 2800 - total flux cleaned = -0.00705701 Jy ! Component: 2850 - total flux cleaned = -0.00691439 Jy ! Component: 2900 - total flux cleaned = -0.00681495 Jy ! Component: 2950 - total flux cleaned = -0.00671336 Jy ! Component: 3000 - total flux cleaned = -0.00660788 Jy ! Component: 3050 - total flux cleaned = -0.00649871 Jy ! Component: 3100 - total flux cleaned = -0.00638631 Jy ! Component: 3150 - total flux cleaned = -0.00626822 Jy ! Component: 3200 - total flux cleaned = -0.00614637 Jy ! Component: 3250 - total flux cleaned = -0.00608335 Jy ! Component: 3300 - total flux cleaned = -0.00595349 Jy ! Component: 3350 - total flux cleaned = -0.00581682 Jy ! Component: 3400 - total flux cleaned = -0.00574633 Jy ! Component: 3450 - total flux cleaned = -0.00560049 Jy ! Component: 3500 - total flux cleaned = -0.00552516 Jy ! Component: 3550 - total flux cleaned = -0.00536687 Jy ! Component: 3600 - total flux cleaned = -0.00528569 Jy ! Component: 3650 - total flux cleaned = -0.00511818 Jy ! Component: 3700 - total flux cleaned = -0.00494298 Jy ! Component: 3750 - total flux cleaned = -0.00485272 Jy ! Component: 3800 - total flux cleaned = -0.00466281 Jy ! Component: 3850 - total flux cleaned = -0.00456575 Jy ! Component: 3900 - total flux cleaned = -0.00436265 Jy ! Component: 3950 - total flux cleaned = -0.004149 Jy ! Component: 4000 - total flux cleaned = -0.00403848 Jy ! Component: 4050 - total flux cleaned = -0.0038093 Jy ! Total flux subtracted in 4096 components = -0.0036908 Jy ! Clean residual min=-0.006408 max=0.006931 Jy/beam ! Clean residual mean=0.000144 rms=0.001718 Jy/beam ! Combined flux in latest and established models = 0.415304 Jy keep ! Adding 159 model components to the UV plane model. ! The established model now contains 266 components and 0.415304 Jy ![Exited script file: muppet] wmap "J2336-4115_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.256 x 34.69 at -14.12 degrees (North through East) ! Clean map min=-0.015231 max=0.35211 Jy/beam ! Writing clean map to FITS file: J2336-4115_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.352111 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00208501 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.77644 1.77644 3.55287 7.10574 14.2115 28.423 56.8459 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0062 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.352 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.256 x 34.69 at -14.12 degrees (North through East) ! Clean map min=-0.015231 max=0.35211 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2336-4115_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:08:28 2019