! Started logfile: J2336-4115_S_2017_09_26_pus_uvs.log on Sat May 11 13:09:04 2019 obs J2336-4115_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2336-4115_S_2017_09_26_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.365385 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2336-4115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2336-4115_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.639550Jy sigma=0.003936 ! Fit after self-cal, rms=0.632861Jy sigma=0.003893 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.743 mas, bmaj=34.28 mas, bpa=-26.88 degrees ! Estimated noise=5893.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.281863 Jy ! Component: 100 - total flux cleaned = 0.347759 Jy ! Total flux subtracted in 100 components = 0.347759 Jy ! Clean residual min=-0.015979 max=0.028883 Jy/beam ! Clean residual mean=-0.000320 rms=0.006733 Jy/beam ! Combined flux in latest and established models = 0.347759 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.347759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114467Jy sigma=0.000695 ! Fit after self-cal, rms=0.114473Jy sigma=0.000695 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=35.63 mas, bpa=-26.69 degrees ! Estimated noise=4961.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350367 Jy ! Component: 100 - total flux cleaned = 0.0492441 Jy ! Component: 150 - total flux cleaned = 0.0568829 Jy ! Component: 200 - total flux cleaned = 0.0619713 Jy ! Total flux subtracted in 200 components = 0.0619713 Jy ! Clean residual min=-0.009833 max=0.008381 Jy/beam ! Clean residual mean=-0.000137 rms=0.002927 Jy/beam ! Combined flux in latest and established models = 0.409731 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 72 components and 0.409731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104652Jy sigma=0.000635 ! Fit after self-cal, rms=0.104657Jy sigma=0.000635 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.02 ! LA 1.03 MK 0.99 NL 1.00* OV 1.03 ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.98 ! LA 0.93 MK 0.98 NL 1.00* OV 1.04 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.08 ! LA 1.02 MK 1.01 NL 1.00* OV 0.96 ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.104657Jy sigma=0.000635 ! Fit after self-cal, rms=0.100013Jy sigma=0.000614 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=35.25 mas, bpa=-26.8 degrees ! Estimated noise=5037.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428654 Jy ! Component: 100 - total flux cleaned = 0.000415366 Jy ! Component: 150 - total flux cleaned = 0.000353716 Jy ! Component: 200 - total flux cleaned = 0.000179832 Jy ! Total flux subtracted in 200 components = 0.000179832 Jy ! Clean residual min=-0.006779 max=0.007382 Jy/beam ! Clean residual mean=0.000022 rms=0.002281 Jy/beam ! Combined flux in latest and established models = 0.40991 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.40991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099930Jy sigma=0.000613 ! Fit after self-cal, rms=0.100005Jy sigma=0.000613 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100005Jy sigma=0.000613 ! Fit after self-cal, rms=0.099988Jy sigma=0.000613 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=35.26 mas, bpa=-26.8 degrees ! Estimated noise=5036.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011572 Jy ! Component: 100 - total flux cleaned = 0.000167704 Jy ! Component: 150 - total flux cleaned = 0.0001666 Jy ! Component: 200 - total flux cleaned = 7.81837e-05 Jy ! Total flux subtracted in 200 components = 7.81837e-05 Jy ! Clean residual min=-0.006692 max=0.006930 Jy/beam ! Clean residual mean=0.000016 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 0.409989 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 0.409989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099947Jy sigma=0.000613 ! Fit after self-cal, rms=0.099943Jy sigma=0.000613 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.00443e-05 Jy ! Component: 100 - total flux cleaned = -8.83455e-05 Jy ! Component: 150 - total flux cleaned = -8.87454e-05 Jy ! Component: 200 - total flux cleaned = -0.000126795 Jy ! Total flux subtracted in 200 components = -0.000126795 Jy ! Clean residual min=-0.006742 max=0.006777 Jy/beam ! Clean residual mean=0.000014 rms=0.002201 Jy/beam ! Combined flux in latest and established models = 0.409862 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 102 components and 0.409862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099915Jy sigma=0.000612 ! Fit after self-cal, rms=0.099914Jy sigma=0.000612 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099914Jy sigma=0.000612 ! Fit after self-cal, rms=0.099925Jy sigma=0.000612 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=35.26 mas, bpa=-26.8 degrees ! Estimated noise=5037.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243211 Jy ! Component: 100 - total flux cleaned = 0.000244049 Jy ! Component: 150 - total flux cleaned = 0.000245722 Jy ! Component: 200 - total flux cleaned = 0.000244976 Jy ! Total flux subtracted in 200 components = 0.000244976 Jy ! Clean residual min=-0.006732 max=0.006592 Jy/beam ! Clean residual mean=0.000013 rms=0.002177 Jy/beam ! Combined flux in latest and established models = 0.410107 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 107 components and 0.410107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099903Jy sigma=0.000612 ! Fit after self-cal, rms=0.099902Jy sigma=0.000612 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102874 Jy ! Component: 100 - total flux cleaned = -0.000103055 Jy ! Component: 150 - total flux cleaned = -0.000166753 Jy ! Component: 200 - total flux cleaned = -0.000259648 Jy ! Total flux subtracted in 200 components = -0.000259648 Jy ! Clean residual min=-0.006781 max=0.006509 Jy/beam ! Clean residual mean=0.000010 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 0.409847 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 112 components and 0.409847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099885Jy sigma=0.000612 ! Fit after self-cal, rms=0.099884Jy sigma=0.000612 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099884Jy sigma=0.000612 ! Fit after self-cal, rms=0.099943Jy sigma=0.000612 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.46 mas, bmaj=43.9 mas, bpa=-13.41 degrees ! Estimated noise=6103.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.65729e-05 Jy ! Component: 100 - total flux cleaned = -0.000222753 Jy ! Component: 150 - total flux cleaned = -0.000374244 Jy ! Component: 200 - total flux cleaned = -0.000464108 Jy ! Total flux subtracted in 200 components = -0.000464108 Jy ! Clean residual min=-0.006797 max=0.007014 Jy/beam ! Clean residual mean=0.000007 rms=0.002997 Jy/beam ! Combined flux in latest and established models = 0.409383 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 138 components and 0.409383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099930Jy sigma=0.000612 ! Fit after self-cal, rms=0.099930Jy sigma=0.000612 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142067 Jy ! Component: 100 - total flux cleaned = -0.000285078 Jy ! Component: 150 - total flux cleaned = -0.000395911 Jy ! Component: 200 - total flux cleaned = -0.000451581 Jy ! Total flux subtracted in 200 components = -0.000451581 Jy ! Clean residual min=-0.006834 max=0.006938 Jy/beam ! Clean residual mean=0.000000 rms=0.002977 Jy/beam ! Combined flux in latest and established models = 0.408932 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 153 components and 0.408932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099919Jy sigma=0.000612 ! Fit after self-cal, rms=0.099921Jy sigma=0.000612 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=35.25 mas, bpa=-26.8 degrees ! Estimated noise=5040.67 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 35.25 at -26.8 degrees (North through East) ! Clean map min=-0.0068549 max=0.36774 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.896 mas, bmaj=33.42 mas, bpa=-27.06 degrees ! Estimated noise=5963.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.283935 Jy ! Component: 100 - total flux cleaned = 0.349602 Jy ! Component: 150 - total flux cleaned = 0.377315 Jy ! Component: 200 - total flux cleaned = 0.391426 Jy ! Total flux subtracted in 200 components = 0.391426 Jy ! Clean residual min=-0.010561 max=0.009222 Jy/beam ! Clean residual mean=-0.000061 rms=0.003417 Jy/beam ! Combined flux in latest and established models = 0.391426 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.391426 Jy ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=35.25 mas, bpa=-26.8 degrees ! Estimated noise=5040.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00922945 Jy ! Component: 100 - total flux cleaned = 0.0140319 Jy ! Component: 150 - total flux cleaned = 0.0171324 Jy ! Component: 200 - total flux cleaned = 0.0181493 Jy ! Total flux subtracted in 200 components = 0.0181493 Jy ! Clean residual min=-0.007244 max=0.007573 Jy/beam ! Clean residual mean=0.000016 rms=0.002343 Jy/beam ! Combined flux in latest and established models = 0.409575 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 88 components and 0.409575 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.46 mas, bmaj=43.9 mas, bpa=-13.41 degrees ! Estimated noise=6103.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128852 Jy ! Component: 100 - total flux cleaned = 0.00135416 Jy ! Component: 150 - total flux cleaned = 0.00146942 Jy ! Component: 200 - total flux cleaned = 0.00157287 Jy ! Total flux subtracted in 200 components = 0.00157287 Jy ! Clean residual min=-0.007134 max=0.007792 Jy/beam ! Clean residual mean=0.000032 rms=0.003164 Jy/beam ! Combined flux in latest and established models = 0.411148 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.84707e-05 Jy ! Component: 100 - total flux cleaned = -0.000140559 Jy ! Component: 150 - total flux cleaned = -0.000226543 Jy ! Component: 200 - total flux cleaned = -0.000352827 Jy ! Total flux subtracted in 200 components = -0.000352827 Jy ! Clean residual min=-0.007025 max=0.007458 Jy/beam ! Clean residual mean=0.000026 rms=0.003114 Jy/beam ! Combined flux in latest and established models = 0.410795 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 125 components and 0.410795 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=35.25 mas, bpa=-26.8 degrees ! Estimated noise=5040.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000207733 Jy ! Component: 100 - total flux cleaned = -0.000158809 Jy ! Component: 150 - total flux cleaned = -0.000250759 Jy ! Component: 200 - total flux cleaned = -0.000294739 Jy ! Total flux subtracted in 200 components = -0.000294739 Jy ! Clean residual min=-0.006955 max=0.006863 Jy/beam ! Clean residual mean=0.000012 rms=0.002204 Jy/beam ! Combined flux in latest and established models = 0.410501 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 135 components and 0.410501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099994Jy sigma=0.000612 ! Fit after self-cal, rms=0.099998Jy sigma=0.000612 wmodel J2336-4115_S_2017_09_26_pus_map.mod ! Writing 135 model components to file: J2336-4115_S_2017_09_26_pus_map.mod wobs J2336-4115_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2336-4115_S_2017_09_26_pus_uvs.fits wwins J2336-4115_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J2336-4115_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252443 Jy ! Component: 100 - total flux cleaned = -6.11193e-05 Jy ! Component: 150 - total flux cleaned = 0.000493146 Jy ! Component: 200 - total flux cleaned = 0.00108782 Jy ! Component: 250 - total flux cleaned = 0.00140775 Jy ! Component: 300 - total flux cleaned = 0.00140578 Jy ! Component: 350 - total flux cleaned = 0.00140531 Jy ! Component: 400 - total flux cleaned = 0.00140596 Jy ! Component: 450 - total flux cleaned = 0.00140718 Jy ! Component: 500 - total flux cleaned = 0.0014086 Jy ! Component: 550 - total flux cleaned = 0.00152763 Jy ! Component: 600 - total flux cleaned = 0.00180351 Jy ! Component: 650 - total flux cleaned = 0.00196609 Jy ! Component: 700 - total flux cleaned = 0.0021469 Jy ! Component: 750 - total flux cleaned = 0.00234267 Jy ! Component: 800 - total flux cleaned = 0.00256074 Jy ! Component: 850 - total flux cleaned = 0.0030638 Jy ! Component: 900 - total flux cleaned = 0.00336065 Jy ! Component: 950 - total flux cleaned = 0.0036913 Jy ! Component: 1000 - total flux cleaned = 0.00404971 Jy ! Component: 1050 - total flux cleaned = 0.00445345 Jy ! Component: 1100 - total flux cleaned = 0.0053874 Jy ! Component: 1150 - total flux cleaned = 0.00592528 Jy ! Component: 1200 - total flux cleaned = 0.00649182 Jy ! Component: 1250 - total flux cleaned = 0.00783437 Jy ! Component: 1300 - total flux cleaned = 0.00862268 Jy ! Component: 1350 - total flux cleaned = 0.00945385 Jy ! Component: 1400 - total flux cleaned = 0.0113957 Jy ! Component: 1450 - total flux cleaned = 0.0125367 Jy ! Component: 1500 - total flux cleaned = 0.0137625 Jy ! Component: 1550 - total flux cleaned = 0.0151119 Jy ! Component: 1600 - total flux cleaned = 0.0167128 Jy ! Component: 1650 - total flux cleaned = 0.0184953 Jy ! Component: 1700 - total flux cleaned = 0.0184952 Jy ! Component: 1750 - total flux cleaned = 0.020677 Jy ! Component: 1800 - total flux cleaned = 0.0232282 Jy ! Component: 1850 - total flux cleaned = 0.026149 Jy ! Component: 1900 - total flux cleaned = 0.0262309 Jy ! Component: 1950 - total flux cleaned = 0.0298976 Jy ! Component: 2000 - total flux cleaned = 0.0298255 Jy ! Component: 2050 - total flux cleaned = 0.0345266 Jy ! Component: 2100 - total flux cleaned = 0.0399595 Jy ! Component: 2150 - total flux cleaned = 0.0401877 Jy ! Component: 2200 - total flux cleaned = 0.0471699 Jy ! Component: 2250 - total flux cleaned = 0.0473022 Jy ! Component: 2300 - total flux cleaned = 0.0559893 Jy ! Component: 2350 - total flux cleaned = 0.0560066 Jy ! Component: 2400 - total flux cleaned = 0.0671447 Jy ! Component: 2450 - total flux cleaned = 0.067281 Jy ! Component: 2500 - total flux cleaned = 0.0810301 Jy ! Component: 2550 - total flux cleaned = 0.0969186 Jy ! Component: 2600 - total flux cleaned = 0.0971738 Jy ! Component: 2650 - total flux cleaned = 0.117672 Jy ! Component: 2700 - total flux cleaned = 0.117977 Jy ! Component: 2750 - total flux cleaned = 0.143119 Jy ! Component: 2800 - total flux cleaned = 0.172936 Jy ! Component: 2850 - total flux cleaned = 0.173507 Jy ! Component: 2900 - total flux cleaned = 0.211561 Jy ! Component: 2950 - total flux cleaned = 0.211883 Jy ! Component: 3000 - total flux cleaned = 0.259021 Jy ! Component: 3050 - total flux cleaned = 0.314806 Jy ! Component: 3100 - total flux cleaned = 0.316501 Jy ! Component: 3150 - total flux cleaned = 0.385811 Jy ! Component: 3200 - total flux cleaned = 0.385356 Jy ! Component: 3250 - total flux cleaned = 0.472699 Jy ! Component: 3300 - total flux cleaned = 0.472406 Jy ! Component: 3350 - total flux cleaned = 0.577324 Jy ! Component: 3400 - total flux cleaned = 0.702687 Jy ! Component: 3450 - total flux cleaned = 0.704539 Jy ! Component: 3500 - total flux cleaned = 0.866598 Jy ! Component: 3550 - total flux cleaned = 1.06081 Jy ! Component: 3600 - total flux cleaned = 1.06553 Jy ! Component: 3650 - total flux cleaned = 1.2988 Jy ! Component: 3700 - total flux cleaned = 1.30163 Jy ! Component: 3750 - total flux cleaned = 1.60215 Jy ! Component: 3800 - total flux cleaned = 1.60601 Jy ! Component: 3850 - total flux cleaned = 1.98456 Jy ! Component: 3900 - total flux cleaned = 2.4183 Jy ! Component: 3950 - total flux cleaned = 2.4231 Jy ! Component: 4000 - total flux cleaned = 2.97176 Jy ! Component: 4050 - total flux cleaned = 2.98181 Jy ! Total flux subtracted in 4096 components = 3.65727 Jy ! Clean residual min=-38.589378 max=37.170570 Jy/beam ! Clean residual mean=-0.149235 rms=5.626228 Jy/beam ! Combined flux in latest and established models = 4.06776 Jy keep ! Adding 47 model components to the UV plane model. ! The established model now contains 182 components and 4.06776 Jy ![Exited script file: muppet] wmap "J2336-4115_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 35.25 at -26.8 degrees (North through East) ! Clean map min=-52.845 max=40.952 Jy/beam ! Writing clean map to FITS file: J2336-4115_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 40.9524 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 5.80155 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -42.4997 42.4997 84.9995 print "clev=",int(3*image_rms*10000)/10000 ! clev= 17.4046 print "peak=",int(1000*peak_flux)/1000 ! peak= 40.952 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 35.25 at -26.8 degrees (North through East) ! Clean map min=-52.845 max=40.952 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2336-4115_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:09:09 2019