! Started logfile: J2336-4115_S_2017_07_16_pus_uvs.log on Thu May 9 11:21:09 2019 obs J2336-4115_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J2336-4115_S_2017_07_16_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.206838 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2336-4115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2336-4115_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.800596Jy sigma=0.004774 ! Fit after self-cal, rms=0.778281Jy sigma=0.004644 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.989 mas, bmaj=6.222 mas, bpa=6.953 degrees ! Estimated noise=6797.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185469 Jy ! Component: 100 - total flux cleaned = 0.256265 Jy ! Total flux subtracted in 100 components = 0.256265 Jy ! Clean residual min=-0.032497 max=0.033948 Jy/beam ! Clean residual mean=0.000580 rms=0.011338 Jy/beam ! Combined flux in latest and established models = 0.256265 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.256265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149503Jy sigma=0.000915 ! Fit after self-cal, rms=0.149145Jy sigma=0.000911 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.284 mas, bmaj=6.825 mas, bpa=7.671 degrees ! Estimated noise=6156.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361347 Jy ! Component: 100 - total flux cleaned = 0.0468906 Jy ! Component: 150 - total flux cleaned = 0.045704 Jy ! Component: 200 - total flux cleaned = 0.0435101 Jy ! Total flux subtracted in 200 components = 0.0435101 Jy ! Clean residual min=-0.018083 max=0.018263 Jy/beam ! Clean residual mean=0.000278 rms=0.004730 Jy/beam ! Combined flux in latest and established models = 0.299775 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 70 components and 0.299775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132157Jy sigma=0.000789 ! Fit after self-cal, rms=0.131709Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.99 ! LA 1.00* MK 1.11 NL 1.00* OV 0.85 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 1.00* MK 1.07 NL 1.00* OV 0.84 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.95 ! LA 1.00* MK 0.96 NL 1.00* OV 2.95 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.131709Jy sigma=0.000786 ! Fit after self-cal, rms=0.177223Jy sigma=0.000688 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.304 mas, bmaj=6.874 mas, bpa=7.81 degrees ! Estimated noise=6285.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00522856 Jy ! Component: 100 - total flux cleaned = -0.00585785 Jy ! Component: 150 - total flux cleaned = -0.00420493 Jy ! Component: 200 - total flux cleaned = -0.00248966 Jy ! Total flux subtracted in 200 components = -0.00248966 Jy ! Clean residual min=-0.003967 max=0.003978 Jy/beam ! Clean residual mean=0.000000 rms=0.001460 Jy/beam ! Combined flux in latest and established models = 0.297286 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 116 components and 0.297286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175893Jy sigma=0.000678 ! Fit after self-cal, rms=0.177168Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177168Jy sigma=0.000676 ! Fit after self-cal, rms=0.184499Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.296 mas, bmaj=6.865 mas, bpa=7.887 degrees ! Estimated noise=6233.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00215224 Jy ! Component: 100 - total flux cleaned = -0.00260757 Jy ! Component: 150 - total flux cleaned = -0.00317393 Jy ! Component: 200 - total flux cleaned = -0.00384564 Jy ! Total flux subtracted in 200 components = -0.00384564 Jy ! Clean residual min=-0.002670 max=0.002695 Jy/beam ! Clean residual mean=0.000004 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.29344 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 156 components and 0.29344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183785Jy sigma=0.000672 ! Fit after self-cal, rms=0.183802Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016592 Jy ! Component: 100 - total flux cleaned = -0.00194974 Jy ! Component: 150 - total flux cleaned = -0.00262225 Jy ! Component: 200 - total flux cleaned = -0.00300808 Jy ! Total flux subtracted in 200 components = -0.00300808 Jy ! Clean residual min=-0.002059 max=0.002072 Jy/beam ! Clean residual mean=0.000009 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.290432 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 188 components and 0.290432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183375Jy sigma=0.000670 ! Fit after self-cal, rms=0.183318Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183318Jy sigma=0.000670 ! Fit after self-cal, rms=0.184558Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.292 mas, bmaj=6.863 mas, bpa=7.974 degrees ! Estimated noise=6190.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.00813e-05 Jy ! Component: 100 - total flux cleaned = 0.000185863 Jy ! Component: 150 - total flux cleaned = 0.000182212 Jy ! Component: 200 - total flux cleaned = -4.5919e-05 Jy ! Total flux subtracted in 200 components = -4.5919e-05 Jy ! Clean residual min=-0.001797 max=0.001806 Jy/beam ! Clean residual mean=-0.000004 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.290386 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 221 components and 0.290386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184165Jy sigma=0.000669 ! Fit after self-cal, rms=0.184100Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103408 Jy ! Component: 100 - total flux cleaned = -0.00218628 Jy ! Component: 150 - total flux cleaned = -0.00317077 Jy ! Component: 200 - total flux cleaned = -0.00392267 Jy ! Total flux subtracted in 200 components = -0.00392267 Jy ! Clean residual min=-0.001547 max=0.001535 Jy/beam ! Clean residual mean=0.000010 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.286463 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 256 components and 0.286463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183829Jy sigma=0.000669 ! Fit after self-cal, rms=0.183755Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183755Jy sigma=0.000668 ! Fit after self-cal, rms=0.183519Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.255 mas, bmaj=22.86 mas, bpa=0.7525 degrees ! Estimated noise=9880.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183706 Jy ! Component: 100 - total flux cleaned = -0.0014324 Jy ! Component: 150 - total flux cleaned = -0.000595553 Jy ! Component: 200 - total flux cleaned = 0.000297249 Jy ! Total flux subtracted in 200 components = 0.000297249 Jy ! Clean residual min=-0.001285 max=0.001281 Jy/beam ! Clean residual mean=0.000012 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.286761 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 315 components and 0.286761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183346Jy sigma=0.000668 ! Fit after self-cal, rms=0.183354Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141389 Jy ! Component: 100 - total flux cleaned = -0.00136119 Jy ! Component: 150 - total flux cleaned = -0.00114433 Jy ! Component: 200 - total flux cleaned = -0.000825079 Jy ! Total flux subtracted in 200 components = -0.000825079 Jy ! Clean residual min=-0.000892 max=0.000902 Jy/beam ! Clean residual mean=0.000020 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.285936 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 359 components and 0.285935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183216Jy sigma=0.000668 ! Fit after self-cal, rms=0.183227Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.291 mas, bmaj=6.863 mas, bpa=8.055 degrees ! Estimated noise=6161.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.291 x 6.863 at 8.055 degrees (North through East) ! Clean map min=-0.014242 max=0.15249 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.986 mas, bmaj=6.251 mas, bpa=7.376 degrees ! Estimated noise=6903.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.188441 Jy ! Component: 100 - total flux cleaned = 0.260035 Jy ! Component: 150 - total flux cleaned = 0.269664 Jy ! Component: 200 - total flux cleaned = 0.272098 Jy ! Total flux subtracted in 200 components = 0.272098 Jy ! Clean residual min=-0.019570 max=0.019387 Jy/beam ! Clean residual mean=0.000245 rms=0.005766 Jy/beam ! Combined flux in latest and established models = 0.272098 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.272098 Jy ! Inverting map and beam ! Estimated beam: bmin=2.291 mas, bmaj=6.863 mas, bpa=8.055 degrees ! Estimated noise=6161.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00221693 Jy ! Component: 100 - total flux cleaned = 0.000161812 Jy ! Component: 150 - total flux cleaned = 0.00118022 Jy ! Component: 200 - total flux cleaned = 0.000253942 Jy ! Total flux subtracted in 200 components = 0.000253942 Jy ! Clean residual min=-0.007465 max=0.007292 Jy/beam ! Clean residual mean=0.000076 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 0.272352 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 99 components and 0.272352 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.255 mas, bmaj=22.86 mas, bpa=0.7525 degrees ! Estimated noise=9880.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00328119 Jy ! Component: 100 - total flux cleaned = -0.00343738 Jy ! Component: 150 - total flux cleaned = -0.00292103 Jy ! Component: 200 - total flux cleaned = -0.00291733 Jy ! Total flux subtracted in 200 components = -0.00291733 Jy ! Clean residual min=-0.002260 max=0.002259 Jy/beam ! Clean residual mean=-0.000019 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.269435 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04241e-06 Jy ! Component: 100 - total flux cleaned = -0.000304962 Jy ! Component: 150 - total flux cleaned = -0.00047869 Jy ! Component: 200 - total flux cleaned = -0.000679698 Jy ! Total flux subtracted in 200 components = -0.000679698 Jy ! Clean residual min=-0.003636 max=0.003573 Jy/beam ! Clean residual mean=-0.000050 rms=0.001393 Jy/beam ! Combined flux in latest and established models = 0.268755 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 169 components and 0.268755 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.291 mas, bmaj=6.863 mas, bpa=8.055 degrees ! Estimated noise=6161.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133346 Jy ! Component: 100 - total flux cleaned = -0.000440454 Jy ! Component: 150 - total flux cleaned = -0.000237274 Jy ! Component: 200 - total flux cleaned = -5.05758e-05 Jy ! Total flux subtracted in 200 components = -5.05758e-05 Jy ! Clean residual min=-0.002757 max=0.002769 Jy/beam ! Clean residual mean=-0.000000 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.268704 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 211 components and 0.268704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183434Jy sigma=0.000669 ! Fit after self-cal, rms=0.183229Jy sigma=0.000669 wmodel J2336-4115_S_2017_07_16_pus_map.mod ! Writing 211 model components to file: J2336-4115_S_2017_07_16_pus_map.mod wobs J2336-4115_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J2336-4115_S_2017_07_16_pus_uvs.fits wwins J2336-4115_S_2017_07_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2336-4115_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.291 x 6.863 at 8.055 degrees (North through East) ! Clean map min=-0.017405 max=0.16293 Jy/beam ! Writing clean map to FITS file: J2336-4115_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.16293 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000953679 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.75599 1.75599 3.51197 7.02395 14.0479 28.0958 56.1916 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.162 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.291 x 6.863 at 8.055 degrees (North through East) ! Clean map min=-0.017405 max=0.16293 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2336-4115_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:21:12 2019