! Started logfile: J2336-4115_S_2017_05_01_pus_uvs.log on Wed May 1 18:45:32 2019 obs J2336-4115_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J2336-4115_S_2017_05_01_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.591453 visibilities/baseline/integration-bin. ! Found source: J2336-4115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 1384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2336-4115_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.662631Jy sigma=0.003265 ! Fit after self-cal, rms=0.655590Jy sigma=0.003228 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=6.931 mas, bpa=-9.706 degrees ! Estimated noise=5336.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.27154 Jy ! Component: 100 - total flux cleaned = 0.361175 Jy ! Total flux subtracted in 100 components = 0.361175 Jy ! Clean residual min=-0.023666 max=0.042888 Jy/beam ! Clean residual mean=0.000188 rms=0.007924 Jy/beam ! Combined flux in latest and established models = 0.361175 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.361175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163221Jy sigma=0.000778 ! Fit after self-cal, rms=0.163016Jy sigma=0.000777 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.879 mas, bmaj=7.967 mas, bpa=-9.335 degrees ! Estimated noise=4299.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557896 Jy ! Component: 100 - total flux cleaned = 0.0831018 Jy ! Component: 150 - total flux cleaned = 0.097276 Jy ! Component: 200 - total flux cleaned = 0.104647 Jy ! Total flux subtracted in 200 components = 0.104647 Jy ! Clean residual min=-0.017655 max=0.025510 Jy/beam ! Clean residual mean=-0.000029 rms=0.005516 Jy/beam ! Combined flux in latest and established models = 0.465822 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 44 components and 0.465822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147971Jy sigma=0.000664 ! Fit after self-cal, rms=0.148015Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00* KP 1.01 ! LA 0.97 MK 1.04 NL 1.28 OV 0.98 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00* KP 0.99 ! LA 0.96 MK 0.98 NL 1.32 OV 1.06 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.00 ! LA 0.94 MK 1.05 NL 1.29 OV 0.99 ! PT 0.96 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.00* ! LA 0.91 MK 0.99 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.148015Jy sigma=0.000664 ! Fit after self-cal, rms=0.155511Jy sigma=0.000631 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=7.997 mas, bpa=-9.317 degrees ! Estimated noise=4335.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379451 Jy ! Component: 100 - total flux cleaned = 0.000265721 Jy ! Component: 150 - total flux cleaned = 0.000162444 Jy ! Component: 200 - total flux cleaned = 0.000161122 Jy ! Total flux subtracted in 200 components = 0.000161122 Jy ! Clean residual min=-0.009892 max=0.008324 Jy/beam ! Clean residual mean=-0.000013 rms=0.002541 Jy/beam ! Combined flux in latest and established models = 0.465983 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.465983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155436Jy sigma=0.000631 ! Fit after self-cal, rms=0.155828Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155828Jy sigma=0.000631 ! Fit after self-cal, rms=0.155699Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=7.978 mas, bpa=-9.19 degrees ! Estimated noise=4322.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.6108e-06 Jy ! Component: 100 - total flux cleaned = -4.28502e-05 Jy ! Component: 150 - total flux cleaned = -0.000133922 Jy ! Component: 200 - total flux cleaned = -0.000135358 Jy ! Total flux subtracted in 200 components = -0.000135358 Jy ! Clean residual min=-0.009821 max=0.008209 Jy/beam ! Clean residual mean=-0.000011 rms=0.002519 Jy/beam ! Combined flux in latest and established models = 0.465847 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.465847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155640Jy sigma=0.000631 ! Fit after self-cal, rms=0.155645Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.19882e-06 Jy ! Component: 100 - total flux cleaned = -8.20887e-06 Jy ! Component: 150 - total flux cleaned = -4.55698e-05 Jy ! Component: 200 - total flux cleaned = -4.37578e-05 Jy ! Total flux subtracted in 200 components = -4.37578e-05 Jy ! Clean residual min=-0.009814 max=0.008154 Jy/beam ! Clean residual mean=-0.000011 rms=0.002513 Jy/beam ! Combined flux in latest and established models = 0.465804 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.465804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155613Jy sigma=0.000631 ! Fit after self-cal, rms=0.155617Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155617Jy sigma=0.000631 ! Fit after self-cal, rms=0.155386Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=7.961 mas, bpa=-9.062 degrees ! Estimated noise=4309.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182362 Jy ! Component: 100 - total flux cleaned = -0.000311126 Jy ! Component: 150 - total flux cleaned = -0.00034975 Jy ! Component: 200 - total flux cleaned = -0.000354027 Jy ! Total flux subtracted in 200 components = -0.000354027 Jy ! Clean residual min=-0.009718 max=0.008099 Jy/beam ! Clean residual mean=-0.000008 rms=0.002497 Jy/beam ! Combined flux in latest and established models = 0.46545 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.46545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155346Jy sigma=0.000631 ! Fit after self-cal, rms=0.155351Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.15915e-06 Jy ! Component: 100 - total flux cleaned = -3.88651e-05 Jy ! Component: 150 - total flux cleaned = -3.91887e-05 Jy ! Component: 200 - total flux cleaned = -3.93566e-05 Jy ! Total flux subtracted in 200 components = -3.93566e-05 Jy ! Clean residual min=-0.009715 max=0.008087 Jy/beam ! Clean residual mean=-0.000008 rms=0.002492 Jy/beam ! Combined flux in latest and established models = 0.46541 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.46541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155328Jy sigma=0.000631 ! Fit after self-cal, rms=0.155330Jy sigma=0.000631 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155330Jy sigma=0.000631 ! Fit after self-cal, rms=0.155145Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.252 mas, bmaj=28.99 mas, bpa=-4.326 degrees ! Estimated noise=5603.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215502 Jy ! Component: 100 - total flux cleaned = -0.000218459 Jy ! Component: 150 - total flux cleaned = -0.000220558 Jy ! Component: 200 - total flux cleaned = -0.000222131 Jy ! Total flux subtracted in 200 components = -0.000222131 Jy ! Clean residual min=-0.010371 max=0.009139 Jy/beam ! Clean residual mean=-0.000010 rms=0.003091 Jy/beam ! Combined flux in latest and established models = 0.465188 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 66 components and 0.465188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155140Jy sigma=0.000631 ! Fit after self-cal, rms=0.155111Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120462 Jy ! Component: 100 - total flux cleaned = -0.000121726 Jy ! Component: 150 - total flux cleaned = -0.000123207 Jy ! Component: 200 - total flux cleaned = -0.000124486 Jy ! Total flux subtracted in 200 components = -0.000124486 Jy ! Clean residual min=-0.010338 max=0.009108 Jy/beam ! Clean residual mean=-0.000010 rms=0.003092 Jy/beam ! Combined flux in latest and established models = 0.465064 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 67 components and 0.465064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155125Jy sigma=0.000631 ! Fit after self-cal, rms=0.155099Jy sigma=0.000631 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.95 mas, bpa=-8.965 degrees ! Estimated noise=4298.97 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.887 x 7.95 at -8.965 degrees (North through East) ! Clean map min=-0.0091613 max=0.34946 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.307 mas, bmaj=6.896 mas, bpa=-9.508 degrees ! Estimated noise=5332.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.271998 Jy ! Component: 100 - total flux cleaned = 0.363015 Jy ! Component: 150 - total flux cleaned = 0.402261 Jy ! Component: 200 - total flux cleaned = 0.425042 Jy ! Total flux subtracted in 200 components = 0.425042 Jy ! Clean residual min=-0.014066 max=0.015528 Jy/beam ! Clean residual mean=0.000067 rms=0.003890 Jy/beam ! Combined flux in latest and established models = 0.425042 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.425042 Jy ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.95 mas, bpa=-8.965 degrees ! Estimated noise=4298.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203189 Jy ! Component: 100 - total flux cleaned = 0.0295907 Jy ! Component: 150 - total flux cleaned = 0.0339345 Jy ! Component: 200 - total flux cleaned = 0.0359874 Jy ! Total flux subtracted in 200 components = 0.0359874 Jy ! Clean residual min=-0.009694 max=0.007932 Jy/beam ! Clean residual mean=-0.000008 rms=0.002497 Jy/beam ! Combined flux in latest and established models = 0.46103 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 65 components and 0.46103 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.252 mas, bmaj=28.99 mas, bpa=-4.326 degrees ! Estimated noise=5603.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199305 Jy ! Component: 100 - total flux cleaned = 0.00198646 Jy ! Component: 150 - total flux cleaned = 0.00198369 Jy ! Component: 200 - total flux cleaned = 0.00198214 Jy ! Total flux subtracted in 200 components = 0.00198214 Jy ! Clean residual min=-0.010337 max=0.008807 Jy/beam ! Clean residual mean=-0.000015 rms=0.003157 Jy/beam ! Combined flux in latest and established models = 0.463012 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.04496e-06 Jy ! Component: 100 - total flux cleaned = -1.45512e-06 Jy ! Component: 150 - total flux cleaned = -1.69292e-06 Jy ! Component: 200 - total flux cleaned = -1.9477e-06 Jy ! Total flux subtracted in 200 components = -1.9477e-06 Jy ! Clean residual min=-0.010333 max=0.008776 Jy/beam ! Clean residual mean=-0.000014 rms=0.003150 Jy/beam ! Combined flux in latest and established models = 0.46301 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 0.46301 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.95 mas, bpa=-8.965 degrees ! Estimated noise=4298.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000714416 Jy ! Component: 100 - total flux cleaned = -0.0006651 Jy ! Component: 150 - total flux cleaned = -0.000530552 Jy ! Component: 200 - total flux cleaned = -0.000533604 Jy ! Total flux subtracted in 200 components = -0.000533604 Jy ! Clean residual min=-0.009622 max=0.008042 Jy/beam ! Clean residual mean=-0.000008 rms=0.002487 Jy/beam ! Combined flux in latest and established models = 0.462476 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 0.462476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155049Jy sigma=0.000631 ! Fit after self-cal, rms=0.155026Jy sigma=0.000631 wmodel J2336-4115_S_2017_05_01_pus_map.mod ! Writing 82 model components to file: J2336-4115_S_2017_05_01_pus_map.mod wobs J2336-4115_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J2336-4115_S_2017_05_01_pus_uvs.fits wwins J2336-4115_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J2336-4115_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00431064 Jy ! Component: 100 - total flux cleaned = -0.00566209 Jy ! Component: 150 - total flux cleaned = -0.00566016 Jy ! Component: 200 - total flux cleaned = -0.00553389 Jy ! Component: 250 - total flux cleaned = -0.00553628 Jy ! Component: 300 - total flux cleaned = -0.00542042 Jy ! Component: 350 - total flux cleaned = -0.00508359 Jy ! Component: 400 - total flux cleaned = -0.00508096 Jy ! Component: 450 - total flux cleaned = -0.00487018 Jy ! Component: 500 - total flux cleaned = -0.00486975 Jy ! Component: 550 - total flux cleaned = -0.00486649 Jy ! Component: 600 - total flux cleaned = -0.00496078 Jy ! Component: 650 - total flux cleaned = -0.00532796 Jy ! Component: 700 - total flux cleaned = -0.00603913 Jy ! Component: 750 - total flux cleaned = -0.00638509 Jy ! Component: 800 - total flux cleaned = -0.00672145 Jy ! Component: 850 - total flux cleaned = -0.00705298 Jy ! Component: 900 - total flux cleaned = -0.00737464 Jy ! Component: 950 - total flux cleaned = -0.0077674 Jy ! Component: 1000 - total flux cleaned = -0.00807569 Jy ! Component: 1050 - total flux cleaned = -0.00852836 Jy ! Component: 1100 - total flux cleaned = -0.00882369 Jy ! Component: 1150 - total flux cleaned = -0.00918678 Jy ! Component: 1200 - total flux cleaned = -0.00961383 Jy ! Component: 1250 - total flux cleaned = -0.0100312 Jy ! Component: 1300 - total flux cleaned = -0.0104417 Jy ! Component: 1350 - total flux cleaned = -0.0108448 Jy ! Component: 1400 - total flux cleaned = -0.0112414 Jy ! Component: 1450 - total flux cleaned = -0.0113715 Jy ! Component: 1500 - total flux cleaned = -0.0117567 Jy ! Component: 1550 - total flux cleaned = -0.0120095 Jy ! Component: 1600 - total flux cleaned = -0.0123223 Jy ! Component: 1650 - total flux cleaned = -0.0126301 Jy ! Component: 1700 - total flux cleaned = -0.012812 Jy ! Component: 1750 - total flux cleaned = -0.0128727 Jy ! Component: 1800 - total flux cleaned = -0.0128732 Jy ! Component: 1850 - total flux cleaned = -0.0129914 Jy ! Component: 1900 - total flux cleaned = -0.0128734 Jy ! Component: 1950 - total flux cleaned = -0.0128727 Jy ! Component: 2000 - total flux cleaned = -0.0128727 Jy ! Component: 2050 - total flux cleaned = -0.0128151 Jy ! Component: 2100 - total flux cleaned = -0.0128726 Jy ! Component: 2150 - total flux cleaned = -0.0127574 Jy ! Component: 2200 - total flux cleaned = -0.0128151 Jy ! Component: 2250 - total flux cleaned = -0.0129292 Jy ! Component: 2300 - total flux cleaned = -0.0129288 Jy ! Component: 2350 - total flux cleaned = -0.0128718 Jy ! Component: 2400 - total flux cleaned = -0.012872 Jy ! Component: 2450 - total flux cleaned = -0.0127589 Jy ! Component: 2500 - total flux cleaned = -0.0127024 Jy ! Component: 2550 - total flux cleaned = -0.0127023 Jy ! Component: 2600 - total flux cleaned = -0.0126462 Jy ! Component: 2650 - total flux cleaned = -0.0125899 Jy ! Component: 2700 - total flux cleaned = -0.0125341 Jy ! Component: 2750 - total flux cleaned = -0.01259 Jy ! Component: 2800 - total flux cleaned = -0.0124777 Jy ! Component: 2850 - total flux cleaned = -0.0124214 Jy ! Component: 2900 - total flux cleaned = -0.0124777 Jy ! Component: 2950 - total flux cleaned = -0.0124776 Jy ! Component: 3000 - total flux cleaned = -0.0124773 Jy ! Component: 3050 - total flux cleaned = -0.0124773 Jy ! Component: 3100 - total flux cleaned = -0.0125337 Jy ! Component: 3150 - total flux cleaned = -0.01259 Jy ! Component: 3200 - total flux cleaned = -0.0125898 Jy ! Component: 3250 - total flux cleaned = -0.0128172 Jy ! Component: 3300 - total flux cleaned = -0.0128178 Jy ! Component: 3350 - total flux cleaned = -0.0128753 Jy ! Component: 3400 - total flux cleaned = -0.0129343 Jy ! Component: 3450 - total flux cleaned = -0.0129346 Jy ! Component: 3500 - total flux cleaned = -0.0129348 Jy ! Component: 3550 - total flux cleaned = -0.0129346 Jy ! Component: 3600 - total flux cleaned = -0.0129947 Jy ! Component: 3650 - total flux cleaned = -0.0129348 Jy ! Component: 3700 - total flux cleaned = -0.0129351 Jy ! Component: 3750 - total flux cleaned = -0.0129347 Jy ! Component: 3800 - total flux cleaned = -0.0131202 Jy ! Component: 3850 - total flux cleaned = -0.0130581 Jy ! Component: 3900 - total flux cleaned = -0.0130581 Jy ! Component: 3950 - total flux cleaned = -0.0130583 Jy ! Component: 4000 - total flux cleaned = -0.0129937 Jy ! Component: 4050 - total flux cleaned = -0.0129939 Jy ! Total flux subtracted in 4096 components = -0.0128607 Jy ! Clean residual min=-0.003728 max=0.004170 Jy/beam ! Clean residual mean=0.000008 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.449616 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 336 components and 0.449616 Jy ![Exited script file: muppet] wmap "J2336-4115_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.887 x 7.95 at -8.965 degrees (North through East) ! Clean map min=-0.0064688 max=0.36043 Jy/beam ! Writing clean map to FITS file: J2336-4115_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.360433 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0013187 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0976 1.0976 2.1952 4.3904 8.7808 17.5616 35.1232 70.2464 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.36 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.887 x 7.95 at -8.965 degrees (North through East) ! Clean map min=-0.0064688 max=0.36043 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2336-4115_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:45:36 2019