! Started logfile: J2336-4115_S_2017_03_23_pus_uvs.log on Mon May 13 10:11:37 2019 obs J2336-4115_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2336-4115_S_2017_03_23_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.441026 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2336-4115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2336-4115_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.717124Jy sigma=0.003970 ! Fit after self-cal, rms=0.694353Jy sigma=0.003845 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.114 mas, bmaj=6.486 mas, bpa=3.834 degrees ! Estimated noise=6024.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.225184 Jy ! Component: 100 - total flux cleaned = 0.310017 Jy ! Total flux subtracted in 100 components = 0.310017 Jy ! Clean residual min=-0.028174 max=0.043644 Jy/beam ! Clean residual mean=-0.000554 rms=0.008737 Jy/beam ! Combined flux in latest and established models = 0.310017 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.310017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167431Jy sigma=0.000852 ! Fit after self-cal, rms=0.166644Jy sigma=0.000847 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=7.562 mas, bpa=2.934 degrees ! Estimated noise=4448.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0677457 Jy ! Component: 100 - total flux cleaned = 0.100909 Jy ! Component: 150 - total flux cleaned = 0.11756 Jy ! Component: 200 - total flux cleaned = 0.12594 Jy ! Total flux subtracted in 200 components = 0.12594 Jy ! Clean residual min=-0.019812 max=0.016379 Jy/beam ! Clean residual mean=-0.000331 rms=0.005312 Jy/beam ! Combined flux in latest and established models = 0.435957 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 41 components and 0.435957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135429Jy sigma=0.000702 ! Fit after self-cal, rms=0.135168Jy sigma=0.000701 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.10 ! LA 0.97 MK 0.97 NL 1.00* OV 1.08 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.99 ! LA 0.97 MK 1.01 NL 1.00* OV 1.00 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.83 ! LA 0.74 MK 0.95 NL 1.00* OV 0.97 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 1.00* KP 1.00* ! LA 1.00* MK 1.17 NL 1.00* OV 1.41 ! PT 1.18 SC 1.00* ! ! ! Fit before self-cal, rms=0.135168Jy sigma=0.000701 ! Fit after self-cal, rms=0.118215Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=7.578 mas, bpa=3.085 degrees ! Estimated noise=4392.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.9864e-05 Jy ! Component: 100 - total flux cleaned = 0.000100803 Jy ! Component: 150 - total flux cleaned = 0.000155729 Jy ! Component: 200 - total flux cleaned = 0.000152087 Jy ! Total flux subtracted in 200 components = 0.000152087 Jy ! Clean residual min=-0.014487 max=0.009281 Jy/beam ! Clean residual mean=-0.000088 rms=0.002916 Jy/beam ! Combined flux in latest and established models = 0.436109 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 44 components and 0.436109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118156Jy sigma=0.000637 ! Fit after self-cal, rms=0.118324Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118324Jy sigma=0.000637 ! Fit after self-cal, rms=0.118237Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=7.572 mas, bpa=3.093 degrees ! Estimated noise=4387.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.13373e-05 Jy ! Component: 100 - total flux cleaned = 9.17853e-05 Jy ! Component: 150 - total flux cleaned = 9.02627e-05 Jy ! Component: 200 - total flux cleaned = 8.88592e-05 Jy ! Total flux subtracted in 200 components = 8.88592e-05 Jy ! Clean residual min=-0.014522 max=0.009241 Jy/beam ! Clean residual mean=-0.000087 rms=0.002902 Jy/beam ! Combined flux in latest and established models = 0.436198 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 44 components and 0.436198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118183Jy sigma=0.000637 ! Fit after self-cal, rms=0.118195Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.85353e-05 Jy ! Component: 100 - total flux cleaned = -9.43215e-05 Jy ! Component: 150 - total flux cleaned = -9.74378e-05 Jy ! Component: 200 - total flux cleaned = -9.89577e-05 Jy ! Total flux subtracted in 200 components = -9.89577e-05 Jy ! Clean residual min=-0.014418 max=0.009196 Jy/beam ! Clean residual mean=-0.000088 rms=0.002879 Jy/beam ! Combined flux in latest and established models = 0.436099 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 44 components and 0.436099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118153Jy sigma=0.000636 ! Fit after self-cal, rms=0.118158Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118158Jy sigma=0.000636 ! Fit after self-cal, rms=0.117962Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=7.565 mas, bpa=3.094 degrees ! Estimated noise=4379.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136954 Jy ! Component: 100 - total flux cleaned = -0.000135433 Jy ! Component: 150 - total flux cleaned = -0.000134506 Jy ! Component: 200 - total flux cleaned = -6.47294e-05 Jy ! Total flux subtracted in 200 components = -6.47294e-05 Jy ! Clean residual min=-0.014306 max=0.009199 Jy/beam ! Clean residual mean=-0.000086 rms=0.002852 Jy/beam ! Combined flux in latest and established models = 0.436035 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 45 components and 0.436035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117925Jy sigma=0.000636 ! Fit after self-cal, rms=0.117933Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000115732 Jy ! Component: 100 - total flux cleaned = -0.000114752 Jy ! Component: 150 - total flux cleaned = -0.000115171 Jy ! Component: 200 - total flux cleaned = -0.000115481 Jy ! Total flux subtracted in 200 components = -0.000115481 Jy ! Clean residual min=-0.014227 max=0.009165 Jy/beam ! Clean residual mean=-0.000087 rms=0.002836 Jy/beam ! Combined flux in latest and established models = 0.435919 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 46 components and 0.435919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117903Jy sigma=0.000636 ! Fit after self-cal, rms=0.117908Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117908Jy sigma=0.000636 ! Fit after self-cal, rms=0.117833Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.458 mas, bmaj=28.3 mas, bpa=5.281 degrees ! Estimated noise=6327.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000365686 Jy ! Component: 100 - total flux cleaned = -0.000367931 Jy ! Component: 150 - total flux cleaned = -0.00036862 Jy ! Component: 200 - total flux cleaned = -0.000368977 Jy ! Total flux subtracted in 200 components = -0.000368977 Jy ! Clean residual min=-0.014679 max=0.010767 Jy/beam ! Clean residual mean=-0.000196 rms=0.003589 Jy/beam ! Combined flux in latest and established models = 0.43555 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 48 components and 0.43555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117822Jy sigma=0.000636 ! Fit after self-cal, rms=0.117823Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.60767e-05 Jy ! Component: 100 - total flux cleaned = -9.73675e-05 Jy ! Component: 150 - total flux cleaned = -9.861e-05 Jy ! Component: 200 - total flux cleaned = -9.92516e-05 Jy ! Total flux subtracted in 200 components = -9.92516e-05 Jy ! Clean residual min=-0.014659 max=0.010768 Jy/beam ! Clean residual mean=-0.000197 rms=0.003585 Jy/beam ! Combined flux in latest and established models = 0.435451 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 50 components and 0.435451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117816Jy sigma=0.000636 ! Fit after self-cal, rms=0.117815Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=7.563 mas, bpa=3.068 degrees ! Estimated noise=4376.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.66 x 7.563 at 3.068 degrees (North through East) ! Clean map min=-0.013633 max=0.30404 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.106 mas, bmaj=6.513 mas, bpa=3.944 degrees ! Estimated noise=5941.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.223038 Jy ! Component: 100 - total flux cleaned = 0.309211 Jy ! Component: 150 - total flux cleaned = 0.352062 Jy ! Component: 200 - total flux cleaned = 0.378436 Jy ! Total flux subtracted in 200 components = 0.378436 Jy ! Clean residual min=-0.019363 max=0.020508 Jy/beam ! Clean residual mean=-0.000234 rms=0.004608 Jy/beam ! Combined flux in latest and established models = 0.378436 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.378436 Jy ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=7.563 mas, bpa=3.068 degrees ! Estimated noise=4376.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302144 Jy ! Component: 100 - total flux cleaned = 0.0449569 Jy ! Component: 150 - total flux cleaned = 0.0523724 Jy ! Component: 200 - total flux cleaned = 0.0561049 Jy ! Total flux subtracted in 200 components = 0.0561049 Jy ! Clean residual min=-0.014903 max=0.009169 Jy/beam ! Clean residual mean=-0.000092 rms=0.002921 Jy/beam ! Combined flux in latest and established models = 0.434541 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 48 components and 0.434541 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.458 mas, bmaj=28.3 mas, bpa=5.281 degrees ! Estimated noise=6327.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221509 Jy ! Component: 100 - total flux cleaned = 0.00222134 Jy ! Component: 150 - total flux cleaned = 0.002224 Jy ! Component: 200 - total flux cleaned = 0.00222558 Jy ! Total flux subtracted in 200 components = 0.00222558 Jy ! Clean residual min=-0.015371 max=0.010804 Jy/beam ! Clean residual mean=-0.000177 rms=0.003707 Jy/beam ! Combined flux in latest and established models = 0.436766 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11814e-06 Jy ! Component: 100 - total flux cleaned = 1.98573e-06 Jy ! Component: 150 - total flux cleaned = 2.74805e-06 Jy ! Component: 200 - total flux cleaned = 3.44457e-06 Jy ! Total flux subtracted in 200 components = 3.44457e-06 Jy ! Clean residual min=-0.015209 max=0.010730 Jy/beam ! Clean residual mean=-0.000177 rms=0.003682 Jy/beam ! Combined flux in latest and established models = 0.43677 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 52 components and 0.43677 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=7.563 mas, bpa=3.068 degrees ! Estimated noise=4376.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101504 Jy ! Component: 100 - total flux cleaned = 0.000917918 Jy ! Component: 150 - total flux cleaned = 0.000844073 Jy ! Component: 200 - total flux cleaned = 0.000809533 Jy ! Total flux subtracted in 200 components = 0.000809533 Jy ! Clean residual min=-0.014348 max=0.009548 Jy/beam ! Clean residual mean=-0.000073 rms=0.002868 Jy/beam ! Combined flux in latest and established models = 0.437579 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.437579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117930Jy sigma=0.000636 ! Fit after self-cal, rms=0.117907Jy sigma=0.000636 wmodel J2336-4115_S_2017_03_23_pus_map.mod ! Writing 58 model components to file: J2336-4115_S_2017_03_23_pus_map.mod wobs J2336-4115_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2336-4115_S_2017_03_23_pus_uvs.fits wwins J2336-4115_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J2336-4115_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00576681 Jy ! Component: 100 - total flux cleaned = -0.00908926 Jy ! Component: 150 - total flux cleaned = -0.0114649 Jy ! Component: 200 - total flux cleaned = -0.0134356 Jy ! Component: 250 - total flux cleaned = -0.015098 Jy ! Component: 300 - total flux cleaned = -0.0149924 Jy ! Component: 350 - total flux cleaned = -0.0149844 Jy ! Component: 400 - total flux cleaned = -0.0150778 Jy ! Component: 450 - total flux cleaned = -0.014982 Jy ! Component: 500 - total flux cleaned = -0.014712 Jy ! Component: 550 - total flux cleaned = -0.0144541 Jy ! Component: 600 - total flux cleaned = -0.014455 Jy ! Component: 650 - total flux cleaned = -0.0142912 Jy ! Component: 700 - total flux cleaned = -0.0142108 Jy ! Component: 750 - total flux cleaned = -0.0139757 Jy ! Component: 800 - total flux cleaned = -0.0139765 Jy ! Component: 850 - total flux cleaned = -0.0138271 Jy ! Component: 900 - total flux cleaned = -0.0138277 Jy ! Component: 950 - total flux cleaned = -0.0136828 Jy ! Component: 1000 - total flux cleaned = -0.0136125 Jy ! Component: 1050 - total flux cleaned = -0.0134727 Jy ! Component: 1100 - total flux cleaned = -0.0134053 Jy ! Component: 1150 - total flux cleaned = -0.0133379 Jy ! Component: 1200 - total flux cleaned = -0.0132034 Jy ! Component: 1250 - total flux cleaned = -0.0128708 Jy ! Component: 1300 - total flux cleaned = -0.0126072 Jy ! Component: 1350 - total flux cleaned = -0.0122798 Jy ! Component: 1400 - total flux cleaned = -0.012019 Jy ! Component: 1450 - total flux cleaned = -0.0116297 Jy ! Component: 1500 - total flux cleaned = -0.0112424 Jy ! Component: 1550 - total flux cleaned = -0.0109841 Jy ! Component: 1600 - total flux cleaned = -0.0108557 Jy ! Component: 1650 - total flux cleaned = -0.0105343 Jy ! Component: 1700 - total flux cleaned = -0.0104054 Jy ! Component: 1750 - total flux cleaned = -0.010341 Jy ! Component: 1800 - total flux cleaned = -0.010083 Jy ! Component: 1850 - total flux cleaned = -0.00988924 Jy ! Component: 1900 - total flux cleaned = -0.00975975 Jy ! Component: 1950 - total flux cleaned = -0.00956385 Jy ! Component: 2000 - total flux cleaned = -0.00936683 Jy ! Component: 2050 - total flux cleaned = -0.00930067 Jy ! Component: 2100 - total flux cleaned = -0.00916797 Jy ! Component: 2150 - total flux cleaned = -0.00896644 Jy ! Component: 2200 - total flux cleaned = -0.00882898 Jy ! Component: 2250 - total flux cleaned = -0.0086898 Jy ! Component: 2300 - total flux cleaned = -0.00840535 Jy ! Component: 2350 - total flux cleaned = -0.00818661 Jy ! Component: 2400 - total flux cleaned = -0.00796299 Jy ! Component: 2450 - total flux cleaned = -0.0077346 Jy ! Component: 2500 - total flux cleaned = -0.00750294 Jy ! Component: 2550 - total flux cleaned = -0.00726546 Jy ! Component: 2600 - total flux cleaned = -0.00702088 Jy ! Component: 2650 - total flux cleaned = -0.00677087 Jy ! Component: 2700 - total flux cleaned = -0.00651444 Jy ! Component: 2750 - total flux cleaned = -0.00625365 Jy ! Component: 2800 - total flux cleaned = -0.00598472 Jy ! Component: 2850 - total flux cleaned = -0.00580174 Jy ! Component: 2900 - total flux cleaned = -0.00552056 Jy ! Component: 2950 - total flux cleaned = -0.00523208 Jy ! Component: 3000 - total flux cleaned = -0.00503461 Jy ! Component: 3050 - total flux cleaned = -0.00473102 Jy ! Component: 3100 - total flux cleaned = -0.00441885 Jy ! Component: 3150 - total flux cleaned = -0.00420443 Jy ! Component: 3200 - total flux cleaned = -0.00398436 Jy ! Component: 3250 - total flux cleaned = -0.00375911 Jy ! Component: 3300 - total flux cleaned = -0.00341221 Jy ! Component: 3350 - total flux cleaned = -0.00329241 Jy ! Component: 3400 - total flux cleaned = -0.00292706 Jy ! Component: 3450 - total flux cleaned = -0.0025497 Jy ! Component: 3500 - total flux cleaned = -0.00228988 Jy ! Component: 3550 - total flux cleaned = -0.0020241 Jy ! Component: 3600 - total flux cleaned = -0.00175185 Jy ! Component: 3650 - total flux cleaned = -0.00133136 Jy ! Component: 3700 - total flux cleaned = -0.00104272 Jy ! Component: 3750 - total flux cleaned = -0.000745924 Jy ! Component: 3800 - total flux cleaned = -0.000442298 Jy ! Component: 3850 - total flux cleaned = -0.000129938 Jy ! Component: 3900 - total flux cleaned = 0.000191156 Jy ! Component: 3950 - total flux cleaned = 0.000356668 Jy ! Component: 4000 - total flux cleaned = 0.000697182 Jy ! Component: 4050 - total flux cleaned = 0.00104939 Jy ! Total flux subtracted in 4096 components = 0.00141106 Jy ! Clean residual min=-0.009500 max=0.010214 Jy/beam ! Clean residual mean=-0.000233 rms=0.002441 Jy/beam ! Combined flux in latest and established models = 0.43899 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 208 components and 0.438991 Jy ![Exited script file: muppet] wmap "J2336-4115_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.66 x 7.563 at 3.068 degrees (North through East) ! Clean map min=-0.027248 max=0.29509 Jy/beam ! Writing clean map to FITS file: J2336-4115_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.295086 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00259232 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.63549 2.63549 5.27098 10.542 21.0839 42.1679 84.3358 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0077 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.295 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.66 x 7.563 at 3.068 degrees (North through East) ! Clean map min=-0.027248 max=0.29509 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2336-4115_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:11:42 2019