! Started logfile: J2336-4115_S_2017_02_24_pus_uvs.log on Sat May 4 11:38:28 2019 obs J2336-4115_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2336-4115_S_2017_02_24_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.355556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2336-4115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 822 lines of history. ! ! Reading 832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2336-4115_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.679632Jy sigma=0.002799 ! Fit after self-cal, rms=0.667954Jy sigma=0.002760 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=18.45 mas, bpa=-3.579 degrees ! Estimated noise=11363.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.251 Jy ! Component: 100 - total flux cleaned = 0.322007 Jy ! Total flux subtracted in 100 components = 0.322007 Jy ! Clean residual min=-0.030422 max=0.041669 Jy/beam ! Clean residual mean=-0.000220 rms=0.010874 Jy/beam ! Combined flux in latest and established models = 0.322007 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.322007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197164Jy sigma=0.000768 ! Fit after self-cal, rms=0.197224Jy sigma=0.000768 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.025 mas, bmaj=24.13 mas, bpa=-1.304 degrees ! Estimated noise=6977.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0666431 Jy ! Component: 100 - total flux cleaned = 0.10179 Jy ! Component: 150 - total flux cleaned = 0.121547 Jy ! Component: 200 - total flux cleaned = 0.132908 Jy ! Total flux subtracted in 200 components = 0.132908 Jy ! Clean residual min=-0.016103 max=0.017661 Jy/beam ! Clean residual mean=-0.000123 rms=0.004785 Jy/beam ! Combined flux in latest and established models = 0.454915 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 82 components and 0.454915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176688Jy sigma=0.000653 ! Fit after self-cal, rms=0.176458Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.15 KP 0.98 ! LA 1.06 MK 1.00* NL 1.07 OV 1.00* ! PT 1.05 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.03 KP 0.91 ! LA 0.92 MK 1.00* NL 1.00 OV 1.00* ! PT 1.02 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.18 KP 0.98 ! LA 0.99 MK 1.00* NL 1.04 OV 1.00* ! PT 1.05 SC 1.08 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.24 HN 1.06 KP 1.00* ! LA 0.94 MK 1.00* NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.176458Jy sigma=0.000653 ! Fit after self-cal, rms=0.179467Jy sigma=0.000640 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.948 mas, bmaj=24 mas, bpa=-1.268 degrees ! Estimated noise=7137.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201545 Jy ! Component: 100 - total flux cleaned = -0.00191528 Jy ! Component: 150 - total flux cleaned = -0.00172239 Jy ! Component: 200 - total flux cleaned = -0.00154395 Jy ! Total flux subtracted in 200 components = -0.00154395 Jy ! Clean residual min=-0.009079 max=0.011474 Jy/beam ! Clean residual mean=0.000004 rms=0.003120 Jy/beam ! Combined flux in latest and established models = 0.453371 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 90 components and 0.453371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179277Jy sigma=0.000640 ! Fit after self-cal, rms=0.179344Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179344Jy sigma=0.000640 ! Fit after self-cal, rms=0.180308Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.948 mas, bmaj=24.08 mas, bpa=-1.248 degrees ! Estimated noise=7129.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183397 Jy ! Component: 100 - total flux cleaned = -0.00175393 Jy ! Component: 150 - total flux cleaned = -0.00152928 Jy ! Component: 200 - total flux cleaned = -0.00139205 Jy ! Total flux subtracted in 200 components = -0.00139205 Jy ! Clean residual min=-0.009032 max=0.011353 Jy/beam ! Clean residual mean=0.000004 rms=0.003050 Jy/beam ! Combined flux in latest and established models = 0.451979 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 93 components and 0.451979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180187Jy sigma=0.000639 ! Fit after self-cal, rms=0.180192Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395378 Jy ! Component: 100 - total flux cleaned = -0.000204332 Jy ! Component: 150 - total flux cleaned = -8.84022e-05 Jy ! Component: 200 - total flux cleaned = 7.65995e-05 Jy ! Total flux subtracted in 200 components = 7.65995e-05 Jy ! Clean residual min=-0.009018 max=0.011337 Jy/beam ! Clean residual mean=0.000004 rms=0.003021 Jy/beam ! Combined flux in latest and established models = 0.452056 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 96 components and 0.452056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180128Jy sigma=0.000639 ! Fit after self-cal, rms=0.180115Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180115Jy sigma=0.000639 ! Fit after self-cal, rms=0.181362Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.95 mas, bmaj=24.16 mas, bpa=-1.227 degrees ! Estimated noise=7126.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168505 Jy ! Component: 100 - total flux cleaned = -0.00162626 Jy ! Component: 150 - total flux cleaned = -0.00151818 Jy ! Component: 200 - total flux cleaned = -0.00146875 Jy ! Total flux subtracted in 200 components = -0.00146875 Jy ! Clean residual min=-0.009051 max=0.011187 Jy/beam ! Clean residual mean=0.000004 rms=0.002988 Jy/beam ! Combined flux in latest and established models = 0.450587 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 100 components and 0.450587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181297Jy sigma=0.000639 ! Fit after self-cal, rms=0.181307Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000261078 Jy ! Component: 100 - total flux cleaned = -0.00012698 Jy ! Component: 150 - total flux cleaned = -5.70527e-06 Jy ! Component: 200 - total flux cleaned = 0.00010932 Jy ! Total flux subtracted in 200 components = 0.00010932 Jy ! Clean residual min=-0.009033 max=0.011233 Jy/beam ! Clean residual mean=0.000004 rms=0.002973 Jy/beam ! Combined flux in latest and established models = 0.450697 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 103 components and 0.450697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181274Jy sigma=0.000639 ! Fit after self-cal, rms=0.181266Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181266Jy sigma=0.000639 ! Fit after self-cal, rms=0.182317Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.115 mas, bmaj=28.82 mas, bpa=-8.014 degrees ! Estimated noise=8446.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000525407 Jy ! Component: 100 - total flux cleaned = -0.000628111 Jy ! Component: 150 - total flux cleaned = -0.000629646 Jy ! Component: 200 - total flux cleaned = -0.000631626 Jy ! Total flux subtracted in 200 components = -0.000631626 Jy ! Clean residual min=-0.008670 max=0.012477 Jy/beam ! Clean residual mean=0.000012 rms=0.003775 Jy/beam ! Combined flux in latest and established models = 0.450065 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 108 components and 0.450065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182288Jy sigma=0.000639 ! Fit after self-cal, rms=0.182302Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111924 Jy ! Component: 100 - total flux cleaned = 0.000114234 Jy ! Component: 150 - total flux cleaned = 0.000112726 Jy ! Component: 200 - total flux cleaned = 0.000146103 Jy ! Total flux subtracted in 200 components = 0.000146103 Jy ! Clean residual min=-0.008624 max=0.012392 Jy/beam ! Clean residual mean=0.000013 rms=0.003764 Jy/beam ! Combined flux in latest and established models = 0.450211 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 110 components and 0.450211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182287Jy sigma=0.000639 ! Fit after self-cal, rms=0.182285Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.952 mas, bmaj=24.23 mas, bpa=-1.209 degrees ! Estimated noise=7124.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.952 x 24.23 at -1.209 degrees (North through East) ! Clean map min=-0.0090194 max=0.3504 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=18.96 mas, bpa=-3.154 degrees ! Estimated noise=11724.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.25783 Jy ! Component: 100 - total flux cleaned = 0.324039 Jy ! Component: 150 - total flux cleaned = 0.362133 Jy ! Component: 200 - total flux cleaned = 0.388346 Jy ! Total flux subtracted in 200 components = 0.388346 Jy ! Clean residual min=-0.021417 max=0.020416 Jy/beam ! Clean residual mean=-0.000087 rms=0.006242 Jy/beam ! Combined flux in latest and established models = 0.388346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.388346 Jy ! Inverting map and beam ! Estimated beam: bmin=3.952 mas, bmaj=24.23 mas, bpa=-1.209 degrees ! Estimated noise=7124.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274267 Jy ! Component: 100 - total flux cleaned = 0.0420819 Jy ! Component: 150 - total flux cleaned = 0.0506425 Jy ! Component: 200 - total flux cleaned = 0.0557836 Jy ! Total flux subtracted in 200 components = 0.0557836 Jy ! Clean residual min=-0.009598 max=0.010691 Jy/beam ! Clean residual mean=-0.000011 rms=0.003198 Jy/beam ! Combined flux in latest and established models = 0.44413 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 113 components and 0.44413 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.115 mas, bmaj=28.82 mas, bpa=-8.014 degrees ! Estimated noise=8446.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472927 Jy ! Component: 100 - total flux cleaned = 0.00586206 Jy ! Component: 150 - total flux cleaned = 0.00592225 Jy ! Component: 200 - total flux cleaned = 0.00592302 Jy ! Total flux subtracted in 200 components = 0.00592302 Jy ! Clean residual min=-0.009382 max=0.012639 Jy/beam ! Clean residual mean=0.000008 rms=0.003800 Jy/beam ! Combined flux in latest and established models = 0.450053 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.46298e-05 Jy ! Component: 100 - total flux cleaned = 9.10212e-05 Jy ! Component: 150 - total flux cleaned = 0.000134577 Jy ! Component: 200 - total flux cleaned = 0.000219121 Jy ! Total flux subtracted in 200 components = 0.000219121 Jy ! Clean residual min=-0.009313 max=0.012459 Jy/beam ! Clean residual mean=0.000009 rms=0.003789 Jy/beam ! Combined flux in latest and established models = 0.450272 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 122 components and 0.450272 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.952 mas, bmaj=24.23 mas, bpa=-1.209 degrees ! Estimated noise=7124.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015054 Jy ! Component: 100 - total flux cleaned = 0.00023461 Jy ! Component: 150 - total flux cleaned = 0.000171211 Jy ! Component: 200 - total flux cleaned = 0.000118991 Jy ! Total flux subtracted in 200 components = 0.000118991 Jy ! Clean residual min=-0.009249 max=0.011146 Jy/beam ! Clean residual mean=0.000005 rms=0.003036 Jy/beam ! Combined flux in latest and established models = 0.450391 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 143 components and 0.450391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182444Jy sigma=0.000639 ! Fit after self-cal, rms=0.182453Jy sigma=0.000639 wmodel J2336-4115_S_2017_02_24_pus_map.mod ! Writing 143 model components to file: J2336-4115_S_2017_02_24_pus_map.mod wobs J2336-4115_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2336-4115_S_2017_02_24_pus_uvs.fits wwins J2336-4115_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J2336-4115_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038974 Jy ! Component: 100 - total flux cleaned = 0.00470541 Jy ! Component: 150 - total flux cleaned = 0.00543841 Jy ! Component: 200 - total flux cleaned = 0.00611475 Jy ! Component: 250 - total flux cleaned = 0.00623353 Jy ! Component: 300 - total flux cleaned = 0.00623344 Jy ! Component: 350 - total flux cleaned = 0.00611685 Jy ! Component: 400 - total flux cleaned = 0.00600388 Jy ! Component: 450 - total flux cleaned = 0.0058942 Jy ! Component: 500 - total flux cleaned = 0.00589415 Jy ! Component: 550 - total flux cleaned = 0.00621767 Jy ! Component: 600 - total flux cleaned = 0.00643598 Jy ! Component: 650 - total flux cleaned = 0.006547 Jy ! Component: 700 - total flux cleaned = 0.00654853 Jy ! Component: 750 - total flux cleaned = 0.00654907 Jy ! Component: 800 - total flux cleaned = 0.00654934 Jy ! Component: 850 - total flux cleaned = 0.00642607 Jy ! Component: 900 - total flux cleaned = 0.00642388 Jy ! Component: 950 - total flux cleaned = 0.00629015 Jy ! Component: 1000 - total flux cleaned = 0.00628959 Jy ! Component: 1050 - total flux cleaned = 0.00614718 Jy ! Component: 1100 - total flux cleaned = 0.00599315 Jy ! Component: 1150 - total flux cleaned = 0.00598749 Jy ! Component: 1200 - total flux cleaned = 0.00581715 Jy ! Component: 1250 - total flux cleaned = 0.00581752 Jy ! Component: 1300 - total flux cleaned = 0.00581455 Jy ! Component: 1350 - total flux cleaned = 0.00580652 Jy ! Component: 1400 - total flux cleaned = 0.00580419 Jy ! Component: 1450 - total flux cleaned = 0.00558938 Jy ! Component: 1500 - total flux cleaned = 0.00558841 Jy ! Component: 1550 - total flux cleaned = 0.00534075 Jy ! Component: 1600 - total flux cleaned = 0.00532588 Jy ! Component: 1650 - total flux cleaned = 0.00530857 Jy ! Component: 1700 - total flux cleaned = 0.00528972 Jy ! Component: 1750 - total flux cleaned = 0.00526896 Jy ! Component: 1800 - total flux cleaned = 0.005243 Jy ! Component: 1850 - total flux cleaned = 0.00521973 Jy ! Component: 1900 - total flux cleaned = 0.00519723 Jy ! Component: 1950 - total flux cleaned = 0.00517491 Jy ! Component: 2000 - total flux cleaned = 0.00516535 Jy ! Component: 2050 - total flux cleaned = 0.00514011 Jy ! Component: 2100 - total flux cleaned = 0.00511142 Jy ! Component: 2150 - total flux cleaned = 0.00510375 Jy ! Component: 2200 - total flux cleaned = 0.00508131 Jy ! Component: 2250 - total flux cleaned = 0.00506559 Jy ! Component: 2300 - total flux cleaned = 0.005041 Jy ! Component: 2350 - total flux cleaned = 0.00503341 Jy ! Component: 2400 - total flux cleaned = 0.00501601 Jy ! Component: 2450 - total flux cleaned = 0.00501823 Jy ! Component: 2500 - total flux cleaned = 0.00500396 Jy ! Component: 2550 - total flux cleaned = 0.00591478 Jy ! Component: 2600 - total flux cleaned = 0.00591173 Jy ! Component: 2650 - total flux cleaned = 0.00592242 Jy ! Component: 2700 - total flux cleaned = 0.00593581 Jy ! Component: 2750 - total flux cleaned = 0.00596474 Jy ! Component: 2800 - total flux cleaned = 0.00599227 Jy ! Component: 2850 - total flux cleaned = 0.00601906 Jy ! Component: 2900 - total flux cleaned = 0.00608667 Jy ! Component: 2950 - total flux cleaned = 0.00615446 Jy ! Component: 3000 - total flux cleaned = 0.00621042 Jy ! Component: 3050 - total flux cleaned = 0.00627058 Jy ! Component: 3100 - total flux cleaned = 0.00632634 Jy ! Component: 3150 - total flux cleaned = 0.00639702 Jy ! Component: 3200 - total flux cleaned = 0.00646732 Jy ! Component: 3250 - total flux cleaned = 0.00652544 Jy ! Component: 3300 - total flux cleaned = 0.00653327 Jy ! Component: 3350 - total flux cleaned = 0.00656107 Jy ! Component: 3400 - total flux cleaned = 0.0066761 Jy ! Component: 3450 - total flux cleaned = 0.00674896 Jy ! Component: 3500 - total flux cleaned = 0.0068427 Jy ! Component: 3550 - total flux cleaned = 0.0069141 Jy ! Component: 3600 - total flux cleaned = 0.00699248 Jy ! Component: 3650 - total flux cleaned = 0.00700102 Jy ! Component: 3700 - total flux cleaned = 0.0071013 Jy ! Component: 3750 - total flux cleaned = 0.00732285 Jy ! Component: 3800 - total flux cleaned = 0.0075783 Jy ! Component: 3850 - total flux cleaned = 0.00768898 Jy ! Component: 3900 - total flux cleaned = 0.00782751 Jy ! Component: 3950 - total flux cleaned = 0.00800501 Jy ! Component: 4000 - total flux cleaned = 0.00835195 Jy ! Component: 4050 - total flux cleaned = 0.00858703 Jy ! Total flux subtracted in 4096 components = 0.00873256 Jy ! Clean residual min=-0.420615 max=0.425164 Jy/beam ! Clean residual mean=-0.003216 rms=0.079521 Jy/beam ! Combined flux in latest and established models = 0.459123 Jy keep ! Adding 110 model components to the UV plane model. ! The established model now contains 253 components and 0.459123 Jy ![Exited script file: muppet] wmap "J2336-4115_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.952 x 24.23 at -1.209 degrees (North through East) ! Clean map min=-0.54168 max=0.5286 Jy/beam ! Writing clean map to FITS file: J2336-4115_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.528602 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0681705 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -38.6891 38.6891 77.3783 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.2045 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.528 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.952 x 24.23 at -1.209 degrees (North through East) ! Clean map min=-0.54168 max=0.5286 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2336-4115_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:38:32 2019