! Started logfile: J2336-4115_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:26:38 2019 obs J2336-4115_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2336-4115_S_2017_01_16_pus_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.188304 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2336-4115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1288 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2336-4115_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.762440Jy sigma=0.003708 ! Fit after self-cal, rms=0.716668Jy sigma=0.003586 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.793 mas, bmaj=16.96 mas, bpa=17.34 degrees ! Estimated noise=5579.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202225 Jy ! Component: 100 - total flux cleaned = 0.265268 Jy ! Total flux subtracted in 100 components = 0.265268 Jy ! Clean residual min=-0.019018 max=0.028391 Jy/beam ! Clean residual mean=-0.000597 rms=0.006526 Jy/beam ! Combined flux in latest and established models = 0.265268 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.265268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187576Jy sigma=0.000821 ! Fit after self-cal, rms=0.187583Jy sigma=0.000820 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.492 mas, bmaj=19.79 mas, bpa=16.82 degrees ! Estimated noise=4255.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633866 Jy ! Component: 100 - total flux cleaned = 0.0941159 Jy ! Component: 150 - total flux cleaned = 0.111747 Jy ! Component: 200 - total flux cleaned = 0.122415 Jy ! Total flux subtracted in 200 components = 0.122415 Jy ! Clean residual min=-0.015672 max=0.019651 Jy/beam ! Clean residual mean=-0.001143 rms=0.005282 Jy/beam ! Combined flux in latest and established models = 0.387683 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 94 components and 0.387683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168281Jy sigma=0.000685 ! Fit after self-cal, rms=0.168359Jy sigma=0.000684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.95 ! LA 1.00 MK 1.00* NL 1.02 OV 1.00* ! PT 0.91 SC 1.02 ! ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.93 ! LA 1.01 MK 1.00* NL 1.12 OV 1.00* ! PT 0.90 SC 1.05 ! ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 0.97 MK 1.00* NL 1.07 OV 1.00* ! PT 0.89 SC 1.22 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.26 ! LA 0.93 MK 1.00* NL 1.00* OV 1.00* ! PT 0.84 SC 0.80 ! ! ! Fit before self-cal, rms=0.168359Jy sigma=0.000684 ! Fit after self-cal, rms=0.155275Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=19.55 mas, bpa=16.68 degrees ! Estimated noise=4305.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277404 Jy ! Component: 100 - total flux cleaned = 0.00331342 Jy ! Component: 150 - total flux cleaned = 0.00355233 Jy ! Component: 200 - total flux cleaned = 0.00376968 Jy ! Total flux subtracted in 200 components = 0.00376968 Jy ! Clean residual min=-0.013614 max=0.010189 Jy/beam ! Clean residual mean=-0.000437 rms=0.003336 Jy/beam ! Combined flux in latest and established models = 0.391453 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 106 components and 0.391453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155005Jy sigma=0.000638 ! Fit after self-cal, rms=0.155796Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155796Jy sigma=0.000637 ! Fit after self-cal, rms=0.147240Jy sigma=0.000625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=19.51 mas, bpa=16.67 degrees ! Estimated noise=4317.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329211 Jy ! Component: 100 - total flux cleaned = 0.00407603 Jy ! Component: 150 - total flux cleaned = 0.00414941 Jy ! Component: 200 - total flux cleaned = 0.00421772 Jy ! Total flux subtracted in 200 components = 0.00421772 Jy ! Clean residual min=-0.009722 max=0.008706 Jy/beam ! Clean residual mean=-0.000269 rms=0.002543 Jy/beam ! Combined flux in latest and established models = 0.39567 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.39567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147115Jy sigma=0.000624 ! Fit after self-cal, rms=0.146894Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133144 Jy ! Component: 100 - total flux cleaned = 0.000191431 Jy ! Component: 150 - total flux cleaned = 0.000246131 Jy ! Component: 200 - total flux cleaned = 0.000298678 Jy ! Total flux subtracted in 200 components = 0.000298678 Jy ! Clean residual min=-0.009737 max=0.008689 Jy/beam ! Clean residual mean=-0.000265 rms=0.002533 Jy/beam ! Combined flux in latest and established models = 0.395969 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 131 components and 0.395969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146847Jy sigma=0.000624 ! Fit after self-cal, rms=0.146846Jy sigma=0.000624 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146846Jy sigma=0.000624 ! Fit after self-cal, rms=0.141125Jy sigma=0.000613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=19.51 mas, bpa=16.64 degrees ! Estimated noise=4313.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000771558 Jy ! Component: 100 - total flux cleaned = -0.000856371 Jy ! Component: 150 - total flux cleaned = -0.000894276 Jy ! Component: 200 - total flux cleaned = -0.000930085 Jy ! Total flux subtracted in 200 components = -0.000930085 Jy ! Clean residual min=-0.007923 max=0.008862 Jy/beam ! Clean residual mean=-0.000018 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.395039 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 142 components and 0.395039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141090Jy sigma=0.000613 ! Fit after self-cal, rms=0.140972Jy sigma=0.000613 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (92, -66.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637022 Jy ! Component: 100 - total flux cleaned = 0.00582559 Jy ! Component: 150 - total flux cleaned = 0.0051366 Jy ! Component: 200 - total flux cleaned = 0.00466217 Jy ! Total flux subtracted in 200 components = 0.00466217 Jy ! Clean residual min=-0.006765 max=0.006152 Jy/beam ! Clean residual mean=-0.000088 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.399701 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 169 components and 0.399701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140386Jy sigma=0.000610 ! Fit after self-cal, rms=0.140274Jy sigma=0.000610 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140274Jy sigma=0.000610 ! Fit after self-cal, rms=0.139364Jy sigma=0.000610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.865 mas, bmaj=29.61 mas, bpa=4.152 degrees ! Estimated noise=5190.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000765065 Jy ! Component: 100 - total flux cleaned = 0.000716723 Jy ! Component: 150 - total flux cleaned = 0.000401676 Jy ! Component: 200 - total flux cleaned = 0.000120204 Jy ! Total flux subtracted in 200 components = 0.000120204 Jy ! Clean residual min=-0.004429 max=0.004878 Jy/beam ! Clean residual mean=-0.000081 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.399821 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 185 components and 0.399821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139262Jy sigma=0.000610 ! Fit after self-cal, rms=0.139239Jy sigma=0.000610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220438 Jy ! Component: 100 - total flux cleaned = -0.000457532 Jy ! Component: 150 - total flux cleaned = -0.000677227 Jy ! Component: 200 - total flux cleaned = -0.000799738 Jy ! Total flux subtracted in 200 components = -0.000799738 Jy ! Clean residual min=-0.004287 max=0.004710 Jy/beam ! Clean residual mean=-0.000069 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.399022 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 197 components and 0.399022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139200Jy sigma=0.000610 ! Fit after self-cal, rms=0.139198Jy sigma=0.000610 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=19.52 mas, bpa=16.67 degrees ! Estimated noise=4294.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.414 x 19.52 at 16.67 degrees (North through East) ! Clean map min=-0.0057771 max=0.26574 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=16.79 mas, bpa=17.25 degrees ! Estimated noise=5724.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201586 Jy ! Component: 100 - total flux cleaned = 0.265672 Jy ! Component: 150 - total flux cleaned = 0.29853 Jy ! Component: 200 - total flux cleaned = 0.314564 Jy ! Total flux subtracted in 200 components = 0.314564 Jy ! Clean residual min=-0.012874 max=0.012179 Jy/beam ! Clean residual mean=-0.000318 rms=0.003806 Jy/beam ! Combined flux in latest and established models = 0.314564 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.314564 Jy ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=19.52 mas, bpa=16.67 degrees ! Estimated noise=4294.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311626 Jy ! Component: 100 - total flux cleaned = 0.0480489 Jy ! Component: 150 - total flux cleaned = 0.0591843 Jy ! Component: 200 - total flux cleaned = 0.0648018 Jy ! Total flux subtracted in 200 components = 0.0648018 Jy ! Clean residual min=-0.008366 max=0.007163 Jy/beam ! Clean residual mean=-0.000242 rms=0.002496 Jy/beam ! Combined flux in latest and established models = 0.379366 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 125 components and 0.379366 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.865 mas, bmaj=29.61 mas, bpa=4.152 degrees ! Estimated noise=5190.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661605 Jy ! Component: 100 - total flux cleaned = 0.00947831 Jy ! Component: 150 - total flux cleaned = 0.0115705 Jy ! Component: 200 - total flux cleaned = 0.0131582 Jy ! Total flux subtracted in 200 components = 0.0131582 Jy ! Clean residual min=-0.005585 max=0.004949 Jy/beam ! Clean residual mean=-0.000159 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 0.392524 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000699761 Jy ! Component: 100 - total flux cleaned = 0.000944435 Jy ! Component: 150 - total flux cleaned = 0.00108299 Jy ! Component: 200 - total flux cleaned = 0.00126238 Jy ! Total flux subtracted in 200 components = 0.00126238 Jy ! Clean residual min=-0.005018 max=0.004700 Jy/beam ! Clean residual mean=-0.000119 rms=0.001661 Jy/beam ! Combined flux in latest and established models = 0.393786 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 171 components and 0.393786 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=19.52 mas, bpa=16.67 degrees ! Estimated noise=4294.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000942457 Jy ! Component: 100 - total flux cleaned = 0.000952345 Jy ! Component: 150 - total flux cleaned = 0.000844995 Jy ! Component: 200 - total flux cleaned = 0.000638661 Jy ! Total flux subtracted in 200 components = 0.000638661 Jy ! Clean residual min=-0.005877 max=0.005198 Jy/beam ! Clean residual mean=-0.000081 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.394425 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 197 components and 0.394425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139203Jy sigma=0.000610 ! Fit after self-cal, rms=0.139153Jy sigma=0.000610 wmodel J2336-4115_S_2017_01_16_pus_map.mod ! Writing 197 model components to file: J2336-4115_S_2017_01_16_pus_map.mod wobs J2336-4115_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2336-4115_S_2017_01_16_pus_uvs.fits wwins J2336-4115_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J2336-4115_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00223337 Jy ! Component: 100 - total flux cleaned = -0.00289956 Jy ! Component: 150 - total flux cleaned = -0.00387879 Jy ! Component: 200 - total flux cleaned = -0.00455477 Jy ! Component: 250 - total flux cleaned = -0.0053631 Jy ! Component: 300 - total flux cleaned = -0.00582774 Jy ! Component: 350 - total flux cleaned = -0.00627259 Jy ! Component: 400 - total flux cleaned = -0.00648572 Jy ! Component: 450 - total flux cleaned = -0.00683 Jy ! Component: 500 - total flux cleaned = -0.00709517 Jy ! Component: 550 - total flux cleaned = -0.00728796 Jy ! Component: 600 - total flux cleaned = -0.00760033 Jy ! Component: 650 - total flux cleaned = -0.00784386 Jy ! Component: 700 - total flux cleaned = -0.00808138 Jy ! Component: 750 - total flux cleaned = -0.00825435 Jy ! Component: 800 - total flux cleaned = -0.00819782 Jy ! Component: 850 - total flux cleaned = -0.00830844 Jy ! Component: 900 - total flux cleaned = -0.00830874 Jy ! Component: 950 - total flux cleaned = -0.00836098 Jy ! Component: 1000 - total flux cleaned = -0.00841194 Jy ! Component: 1050 - total flux cleaned = -0.00831222 Jy ! Component: 1100 - total flux cleaned = -0.00836235 Jy ! Component: 1150 - total flux cleaned = -0.0083138 Jy ! Component: 1200 - total flux cleaned = -0.00836147 Jy ! Component: 1250 - total flux cleaned = -0.00840764 Jy ! Component: 1300 - total flux cleaned = -0.00840735 Jy ! Component: 1350 - total flux cleaned = -0.00845193 Jy ! Component: 1400 - total flux cleaned = -0.00858486 Jy ! Component: 1450 - total flux cleaned = -0.00867132 Jy ! Component: 1500 - total flux cleaned = -0.00871353 Jy ! Component: 1550 - total flux cleaned = -0.00867223 Jy ! Component: 1600 - total flux cleaned = -0.00883914 Jy ! Component: 1650 - total flux cleaned = -0.00896221 Jy ! Component: 1700 - total flux cleaned = -0.0090432 Jy ! Component: 1750 - total flux cleaned = -0.0091631 Jy ! Component: 1800 - total flux cleaned = -0.00920244 Jy ! Component: 1850 - total flux cleaned = -0.00928072 Jy ! Component: 1900 - total flux cleaned = -0.00935824 Jy ! Component: 1950 - total flux cleaned = -0.00943407 Jy ! Component: 2000 - total flux cleaned = -0.00939618 Jy ! Component: 2050 - total flux cleaned = -0.0093592 Jy ! Component: 2100 - total flux cleaned = -0.00928592 Jy ! Component: 2150 - total flux cleaned = -0.00932247 Jy ! Component: 2200 - total flux cleaned = -0.00932252 Jy ! Component: 2250 - total flux cleaned = -0.00928674 Jy ! Component: 2300 - total flux cleaned = -0.00914696 Jy ! Component: 2350 - total flux cleaned = -0.00911264 Jy ! Component: 2400 - total flux cleaned = -0.00914688 Jy ! Component: 2450 - total flux cleaned = -0.00911296 Jy ! Component: 2500 - total flux cleaned = -0.00911289 Jy ! Component: 2550 - total flux cleaned = -0.00914614 Jy ! Component: 2600 - total flux cleaned = -0.00914633 Jy ! Component: 2650 - total flux cleaned = -0.00921217 Jy ! Component: 2700 - total flux cleaned = -0.00927746 Jy ! Component: 2750 - total flux cleaned = -0.00924479 Jy ! Component: 2800 - total flux cleaned = -0.00924486 Jy ! Component: 2850 - total flux cleaned = -0.00914879 Jy ! Component: 2900 - total flux cleaned = -0.00911695 Jy ! Component: 2950 - total flux cleaned = -0.00911661 Jy ! Component: 3000 - total flux cleaned = -0.00895919 Jy ! Component: 3050 - total flux cleaned = -0.00889665 Jy ! Component: 3100 - total flux cleaned = -0.00883441 Jy ! Component: 3150 - total flux cleaned = -0.00877246 Jy ! Component: 3200 - total flux cleaned = -0.00880337 Jy ! Component: 3250 - total flux cleaned = -0.00880347 Jy ! Component: 3300 - total flux cleaned = -0.00874198 Jy ! Component: 3350 - total flux cleaned = -0.00871137 Jy ! Component: 3400 - total flux cleaned = -0.00871142 Jy ! Component: 3450 - total flux cleaned = -0.00862039 Jy ! Component: 3500 - total flux cleaned = -0.00862055 Jy ! Component: 3550 - total flux cleaned = -0.0085904 Jy ! Component: 3600 - total flux cleaned = -0.00856042 Jy ! Component: 3650 - total flux cleaned = -0.00856035 Jy ! Component: 3700 - total flux cleaned = -0.00850067 Jy ! Component: 3750 - total flux cleaned = -0.00844137 Jy ! Component: 3800 - total flux cleaned = -0.00847105 Jy ! Component: 3850 - total flux cleaned = -0.0084711 Jy ! Component: 3900 - total flux cleaned = -0.00852998 Jy ! Component: 3950 - total flux cleaned = -0.00844192 Jy ! Component: 4000 - total flux cleaned = -0.00847121 Jy ! Component: 4050 - total flux cleaned = -0.00847119 Jy ! Total flux subtracted in 4096 components = -0.00847096 Jy ! Clean residual min=-0.001605 max=0.001725 Jy/beam ! Clean residual mean=0.000001 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.385954 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 438 components and 0.385954 Jy ![Exited script file: muppet] wmap "J2336-4115_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.414 x 19.52 at 16.67 degrees (North through East) ! Clean map min=-0.0065484 max=0.2761 Jy/beam ! Writing clean map to FITS file: J2336-4115_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.276104 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000520805 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.565878 0.565878 1.13176 2.26351 4.52702 9.05405 18.1081 36.2162 72.4324 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.276 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.414 x 19.52 at 16.67 degrees (North through East) ! Clean map min=-0.0065484 max=0.2761 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2336-4115_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:26:43 2019