! Started logfile: J2335-0131_S_2017_06_15_pus_uvs.log on Tue May 7 15:29:30 2019 obs J2335-0131_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J2335-0131_S_2017_06_15_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.896825 visibilities/baseline/integration-bin. ! Found source: J2335-0131 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 13560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2335-0131_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 553 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.674185Jy sigma=0.006018 ! Fit after self-cal, rms=0.666175Jy sigma=0.005957 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.664 mas, bmaj=7.105 mas, bpa=-3.904 degrees ! Estimated noise=1015.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254381 Jy ! Component: 100 - total flux cleaned = 0.320458 Jy ! Total flux subtracted in 100 components = 0.320458 Jy ! Clean residual min=-0.016866 max=0.028776 Jy/beam ! Clean residual mean=0.000026 rms=0.003864 Jy/beam ! Combined flux in latest and established models = 0.320458 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.320458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112501Jy sigma=0.000978 ! Fit after self-cal, rms=0.112423Jy sigma=0.000977 ! Inverting map ! Added new window around map position (2.5, -9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032911 Jy ! Component: 100 - total flux cleaned = 0.0532272 Jy ! Total flux subtracted in 100 components = 0.0532272 Jy ! Clean residual min=-0.014296 max=0.021351 Jy/beam ! Clean residual mean=0.000019 rms=0.002827 Jy/beam ! Combined flux in latest and established models = 0.373686 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.373686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099532Jy sigma=0.000848 ! Fit after self-cal, rms=0.099202Jy sigma=0.000844 ! Inverting map ! Added new window around map position (-3.5, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181662 Jy ! Component: 100 - total flux cleaned = 0.029917 Jy ! Total flux subtracted in 100 components = 0.029917 Jy ! Clean residual min=-0.009952 max=0.011856 Jy/beam ! Clean residual mean=0.000017 rms=0.002400 Jy/beam ! Combined flux in latest and established models = 0.403603 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.403603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095069Jy sigma=0.000806 ! Fit after self-cal, rms=0.095050Jy sigma=0.000806 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=7.963 mas, bpa=-3.409 degrees ! Estimated noise=791.276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111814 Jy ! Component: 100 - total flux cleaned = 0.0183913 Jy ! Component: 150 - total flux cleaned = 0.0209264 Jy ! Component: 200 - total flux cleaned = 0.0216188 Jy ! Total flux subtracted in 200 components = 0.0216188 Jy ! Clean residual min=-0.009366 max=0.011162 Jy/beam ! Clean residual mean=0.000033 rms=0.002487 Jy/beam ! Combined flux in latest and established models = 0.425221 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 53 components and 0.425221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093452Jy sigma=0.000791 ! Fit after self-cal, rms=0.093432Jy sigma=0.000791 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.90 HN 0.96 KP 1.03 ! LA 1.01 MK 1.08 NL 0.90 OV 1.00 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.80 FD 0.92 HN 0.98 KP 1.00 ! LA 0.98 MK 1.01 NL 1.05 OV 1.02 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 0.96 HN 1.00 KP 1.02 ! LA 0.99 MK 1.01 NL 1.00 OV 0.93 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.03 KP 1.00* ! LA 1.00* MK 1.09 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.093432Jy sigma=0.000791 ! Fit after self-cal, rms=0.091063Jy sigma=0.000736 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=8.059 mas, bpa=-3.196 degrees ! Estimated noise=803.455 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114239 Jy ! Component: 100 - total flux cleaned = 0.0140169 Jy ! Component: 150 - total flux cleaned = 0.0148072 Jy ! Component: 200 - total flux cleaned = 0.0148089 Jy ! Total flux subtracted in 200 components = 0.0148089 Jy ! Clean residual min=-0.005711 max=0.008003 Jy/beam ! Clean residual mean=0.000024 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 0.44003 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 91 components and 0.44003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089480Jy sigma=0.000721 ! Fit after self-cal, rms=0.089434Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089434Jy sigma=0.000719 ! Fit after self-cal, rms=0.088221Jy sigma=0.000711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=8.067 mas, bpa=-3.174 degrees ! Estimated noise=800.383 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369645 Jy ! Component: 100 - total flux cleaned = 0.000646129 Jy ! Component: 150 - total flux cleaned = 0.00112155 Jy ! Component: 200 - total flux cleaned = 0.00164222 Jy ! Total flux subtracted in 200 components = 0.00164222 Jy ! Clean residual min=-0.005191 max=0.006207 Jy/beam ! Clean residual mean=0.000014 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.441673 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 110 components and 0.441673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087808Jy sigma=0.000707 ! Fit after self-cal, rms=0.087790Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509194 Jy ! Component: 100 - total flux cleaned = 0.00524996 Jy ! Component: 150 - total flux cleaned = 0.00513639 Jy ! Component: 200 - total flux cleaned = 0.00485739 Jy ! Total flux subtracted in 200 components = 0.00485739 Jy ! Clean residual min=-0.004550 max=0.005011 Jy/beam ! Clean residual mean=0.000012 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.44653 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 126 components and 0.44653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087322Jy sigma=0.000703 ! Fit after self-cal, rms=0.087287Jy sigma=0.000703 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087287Jy sigma=0.000703 ! Fit after self-cal, rms=0.085847Jy sigma=0.000691 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.061 mas, bpa=-3.125 degrees ! Estimated noise=798.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123452 Jy ! Component: 100 - total flux cleaned = 0.0011529 Jy ! Component: 150 - total flux cleaned = 0.00098062 Jy ! Component: 200 - total flux cleaned = 0.000906563 Jy ! Total flux subtracted in 200 components = 0.000906563 Jy ! Clean residual min=-0.004109 max=0.004355 Jy/beam ! Clean residual mean=0.000014 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.447437 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 152 components and 0.447437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085639Jy sigma=0.000689 ! Fit after self-cal, rms=0.085631Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664383 Jy ! Component: 100 - total flux cleaned = 0.000600228 Jy ! Component: 150 - total flux cleaned = 0.000540887 Jy ! Component: 200 - total flux cleaned = 0.000487591 Jy ! Total flux subtracted in 200 components = 0.000487591 Jy ! Clean residual min=-0.003990 max=0.004297 Jy/beam ! Clean residual mean=0.000014 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.447924 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 169 components and 0.447924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085543Jy sigma=0.000688 ! Fit after self-cal, rms=0.085538Jy sigma=0.000688 ! Inverting map ! Added new window around map position (110, 28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440951 Jy ! Component: 100 - total flux cleaned = 0.00712085 Jy ! Component: 150 - total flux cleaned = 0.00889349 Jy ! Component: 200 - total flux cleaned = 0.0100048 Jy ! Total flux subtracted in 200 components = 0.0100048 Jy ! Clean residual min=-0.003616 max=0.003500 Jy/beam ! Clean residual mean=0.000011 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.457929 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 206 components and 0.457929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085287Jy sigma=0.000685 ! Fit after self-cal, rms=0.085280Jy sigma=0.000685 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085280Jy sigma=0.000685 ! Fit after self-cal, rms=0.085542Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.644 mas, bmaj=13.32 mas, bpa=-0.775 degrees ! Estimated noise=994.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002943 Jy ! Component: 100 - total flux cleaned = 0.00400515 Jy ! Component: 150 - total flux cleaned = 0.00476407 Jy ! Component: 200 - total flux cleaned = 0.00525972 Jy ! Total flux subtracted in 200 components = 0.00525972 Jy ! Clean residual min=-0.005114 max=0.004671 Jy/beam ! Clean residual mean=0.000018 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.463189 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 243 components and 0.463189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085463Jy sigma=0.000683 ! Fit after self-cal, rms=0.085462Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597414 Jy ! Component: 100 - total flux cleaned = 0.00103738 Jy ! Component: 150 - total flux cleaned = 0.00128198 Jy ! Component: 200 - total flux cleaned = 0.0014159 Jy ! Total flux subtracted in 200 components = 0.0014159 Jy ! Clean residual min=-0.005017 max=0.004544 Jy/beam ! Clean residual mean=0.000016 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.464605 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 253 components and 0.464605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085448Jy sigma=0.000683 ! Fit after self-cal, rms=0.085448Jy sigma=0.000683 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.068 mas, bpa=-3.114 degrees ! Estimated noise=797.879 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.23 x 8.068 at -3.114 degrees (North through East) ! Clean map min=-0.0032931 max=0.32597 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=7.21 mas, bpa=-3.874 degrees ! Estimated noise=1027.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.256656 Jy ! Component: 100 - total flux cleaned = 0.324072 Jy ! Component: 150 - total flux cleaned = 0.354147 Jy ! Component: 200 - total flux cleaned = 0.371501 Jy ! Total flux subtracted in 200 components = 0.371501 Jy ! Clean residual min=-0.006233 max=0.009570 Jy/beam ! Clean residual mean=0.000015 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.371501 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.371501 Jy ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.068 mas, bpa=-3.114 degrees ! Estimated noise=797.879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183834 Jy ! Component: 100 - total flux cleaned = 0.0314829 Jy ! Component: 150 - total flux cleaned = 0.041428 Jy ! Component: 200 - total flux cleaned = 0.0491058 Jy ! Total flux subtracted in 200 components = 0.0491058 Jy ! Clean residual min=-0.004347 max=0.005076 Jy/beam ! Clean residual mean=0.000021 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.420607 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 71 components and 0.420607 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.644 mas, bmaj=13.32 mas, bpa=-0.775 degrees ! Estimated noise=994.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00990121 Jy ! Component: 100 - total flux cleaned = 0.0169422 Jy ! Component: 150 - total flux cleaned = 0.0223315 Jy ! Component: 200 - total flux cleaned = 0.0266254 Jy ! Total flux subtracted in 200 components = 0.0266254 Jy ! Clean residual min=-0.005810 max=0.005275 Jy/beam ! Clean residual mean=0.000029 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 0.447232 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353273 Jy ! Component: 100 - total flux cleaned = 0.00646727 Jy ! Component: 150 - total flux cleaned = 0.00893074 Jy ! Component: 200 - total flux cleaned = 0.0110096 Jy ! Total flux subtracted in 200 components = 0.0110096 Jy ! Clean residual min=-0.005531 max=0.005041 Jy/beam ! Clean residual mean=0.000023 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.458242 Jy ! Adding 130 model components to the UV plane model. ! The established model now contains 191 components and 0.458242 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.068 mas, bpa=-3.114 degrees ! Estimated noise=797.879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000553895 Jy ! Component: 100 - total flux cleaned = 0.00126008 Jy ! Component: 150 - total flux cleaned = 0.00186781 Jy ! Component: 200 - total flux cleaned = 0.00242193 Jy ! Total flux subtracted in 200 components = 0.00242193 Jy ! Clean residual min=-0.003758 max=0.003420 Jy/beam ! Clean residual mean=0.000009 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.460664 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 215 components and 0.460664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085496Jy sigma=0.000684 ! Fit after self-cal, rms=0.085466Jy sigma=0.000684 wmodel J2335-0131_S_2017_06_15_pus_map.mod ! Writing 215 model components to file: J2335-0131_S_2017_06_15_pus_map.mod wobs J2335-0131_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J2335-0131_S_2017_06_15_pus_uvs.fits wwins J2335-0131_S_2017_06_15_pus_map.win ! wwins: Wrote 6 windows to J2335-0131_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.7585e-05 Jy ! Component: 100 - total flux cleaned = 8.82037e-05 Jy ! Component: 150 - total flux cleaned = 8.95415e-05 Jy ! Component: 200 - total flux cleaned = 0.000339587 Jy ! Component: 250 - total flux cleaned = 0.000673442 Jy ! Component: 300 - total flux cleaned = 0.00094778 Jy ! Component: 350 - total flux cleaned = 0.00116883 Jy ! Component: 400 - total flux cleaned = 0.00146766 Jy ! Component: 450 - total flux cleaned = 0.001675 Jy ! Component: 500 - total flux cleaned = 0.00191517 Jy ! Component: 550 - total flux cleaned = 0.00191444 Jy ! Component: 600 - total flux cleaned = 0.00195225 Jy ! Component: 650 - total flux cleaned = 0.00195118 Jy ! Component: 700 - total flux cleaned = 0.00195098 Jy ! Component: 750 - total flux cleaned = 0.00209337 Jy ! Component: 800 - total flux cleaned = 0.00237137 Jy ! Component: 850 - total flux cleaned = 0.00254077 Jy ! Component: 900 - total flux cleaned = 0.00267415 Jy ! Component: 950 - total flux cleaned = 0.00287213 Jy ! Component: 1000 - total flux cleaned = 0.00313125 Jy ! Component: 1050 - total flux cleaned = 0.00322651 Jy ! Component: 1100 - total flux cleaned = 0.00350812 Jy ! Component: 1150 - total flux cleaned = 0.00369197 Jy ! Component: 1200 - total flux cleaned = 0.00369159 Jy ! Component: 1250 - total flux cleaned = 0.00381073 Jy ! Component: 1300 - total flux cleaned = 0.00392738 Jy ! Component: 1350 - total flux cleaned = 0.00401409 Jy ! Component: 1400 - total flux cleaned = 0.00407137 Jy ! Component: 1450 - total flux cleaned = 0.00418324 Jy ! Component: 1500 - total flux cleaned = 0.00426586 Jy ! Component: 1550 - total flux cleaned = 0.0043471 Jy ! Component: 1600 - total flux cleaned = 0.00450664 Jy ! Component: 1650 - total flux cleaned = 0.00455915 Jy ! Component: 1700 - total flux cleaned = 0.00463665 Jy ! Component: 1750 - total flux cleaned = 0.00471318 Jy ! Component: 1800 - total flux cleaned = 0.00483942 Jy ! Component: 1850 - total flux cleaned = 0.00496382 Jy ! Component: 1900 - total flux cleaned = 0.00498844 Jy ! Component: 1950 - total flux cleaned = 0.00501227 Jy ! Component: 2000 - total flux cleaned = 0.00491663 Jy ! Component: 2050 - total flux cleaned = 0.00503606 Jy ! Component: 2100 - total flux cleaned = 0.00515328 Jy ! Component: 2150 - total flux cleaned = 0.0052001 Jy ! Component: 2200 - total flux cleaned = 0.00536116 Jy ! Component: 2250 - total flux cleaned = 0.0054065 Jy ! Component: 2300 - total flux cleaned = 0.00549654 Jy ! Component: 2350 - total flux cleaned = 0.00560828 Jy ! Component: 2400 - total flux cleaned = 0.00582894 Jy ! Component: 2450 - total flux cleaned = 0.00589416 Jy ! Component: 2500 - total flux cleaned = 0.00593718 Jy ! Component: 2550 - total flux cleaned = 0.00615125 Jy ! Component: 2600 - total flux cleaned = 0.00638473 Jy ! Component: 2650 - total flux cleaned = 0.00648999 Jy ! Component: 2700 - total flux cleaned = 0.00667732 Jy ! Component: 2750 - total flux cleaned = 0.00686308 Jy ! Component: 2800 - total flux cleaned = 0.00698593 Jy ! Component: 2850 - total flux cleaned = 0.00718901 Jy ! Component: 2900 - total flux cleaned = 0.00732979 Jy ! Component: 2950 - total flux cleaned = 0.00752903 Jy ! Component: 3000 - total flux cleaned = 0.00768718 Jy ! Component: 3050 - total flux cleaned = 0.00780485 Jy ! Component: 3100 - total flux cleaned = 0.00798006 Jy ! Component: 3150 - total flux cleaned = 0.00809562 Jy ! Component: 3200 - total flux cleaned = 0.00819125 Jy ! Component: 3250 - total flux cleaned = 0.00836214 Jy ! Component: 3300 - total flux cleaned = 0.00855017 Jy ! Component: 3350 - total flux cleaned = 0.00868065 Jy ! Component: 3400 - total flux cleaned = 0.0088287 Jy ! Component: 3450 - total flux cleaned = 0.00903049 Jy ! Component: 3500 - total flux cleaned = 0.00903023 Jy ! Component: 3550 - total flux cleaned = 0.00922887 Jy ! Component: 3600 - total flux cleaned = 0.00924678 Jy ! Component: 3650 - total flux cleaned = 0.009318 Jy ! Component: 3700 - total flux cleaned = 0.0093711 Jy ! Component: 3750 - total flux cleaned = 0.0095464 Jy ! Component: 3800 - total flux cleaned = 0.00956372 Jy ! Component: 3850 - total flux cleaned = 0.00963282 Jy ! Component: 3900 - total flux cleaned = 0.00971856 Jy ! Component: 3950 - total flux cleaned = 0.00982075 Jy ! Component: 4000 - total flux cleaned = 0.00990506 Jy ! Component: 4050 - total flux cleaned = 0.0100057 Jy ! Total flux subtracted in 4096 components = 0.0100556 Jy ! Clean residual min=-0.001058 max=0.001005 Jy/beam ! Clean residual mean=0.000002 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.47072 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 538 components and 0.47072 Jy ![Exited script file: muppet] wmap "J2335-0131_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.23 x 8.068 at -3.114 degrees (North through East) ! Clean map min=-0.0022796 max=0.33026 Jy/beam ! Writing clean map to FITS file: J2335-0131_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.330264 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00031841 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.289232 0.289232 0.578465 1.15693 2.31386 4.62772 9.25544 18.5109 37.0217 74.0435 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.33 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.23 x 8.068 at -3.114 degrees (North through East) ! Clean map min=-0.0022796 max=0.33026 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2335-0131_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:29:35 2019