! Started logfile: J2333-0131_S_2017_06_15_pus_uvs.log on Tue May 7 15:29:25 2019 obs J2333-0131_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J2333-0131_S_2017_06_15_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.900134 visibilities/baseline/integration-bin. ! Found source: J2333-0131 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 13448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2333-0131_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 543 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.928683Jy sigma=0.008512 ! Fit after self-cal, rms=0.919443Jy sigma=0.008436 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=7.047 mas, bpa=-3.52 degrees ! Estimated noise=1098.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0629857 Jy ! Component: 100 - total flux cleaned = 0.0785221 Jy ! Total flux subtracted in 100 components = 0.0785221 Jy ! Clean residual min=-0.004318 max=0.006149 Jy/beam ! Clean residual mean=0.000004 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.0785221 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0785221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078989Jy sigma=0.000686 ! Fit after self-cal, rms=0.078962Jy sigma=0.000685 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=8.006 mas, bpa=-3.307 degrees ! Estimated noise=786.595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00850988 Jy ! Component: 100 - total flux cleaned = 0.0123887 Jy ! Component: 150 - total flux cleaned = 0.0147355 Jy ! Component: 200 - total flux cleaned = 0.0162017 Jy ! Total flux subtracted in 200 components = 0.0162017 Jy ! Clean residual min=-0.002850 max=0.003396 Jy/beam ! Clean residual mean=-0.000001 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0947238 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 39 components and 0.0947238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078138Jy sigma=0.000677 ! Fit after self-cal, rms=0.078144Jy sigma=0.000677 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.92 HN 1.00 KP 1.02 ! LA 1.01 MK 1.04 NL 0.87 OV 1.00 ! PT 1.03 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.39 FD 0.97 HN 1.03 KP 1.02 ! LA 0.94 MK 0.96 NL 1.03 OV 1.04 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.00 HN 1.05 KP 1.01 ! LA 0.98 MK 1.04 NL 0.96 OV 0.90 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.96 KP 1.00* ! LA 1.00* MK 1.11 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.078144Jy sigma=0.000677 ! Fit after self-cal, rms=0.082141Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.082 mas, bpa=-2.932 degrees ! Estimated noise=789.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244202 Jy ! Component: 100 - total flux cleaned = 0.000247425 Jy ! Component: 150 - total flux cleaned = 0.000221696 Jy ! Component: 200 - total flux cleaned = 0.000175169 Jy ! Total flux subtracted in 200 components = 0.000175169 Jy ! Clean residual min=-0.002279 max=0.002462 Jy/beam ! Clean residual mean=-0.000002 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.094899 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.094899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082119Jy sigma=0.000672 ! Fit after self-cal, rms=0.082268Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082268Jy sigma=0.000672 ! Fit after self-cal, rms=0.082712Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.083 mas, bpa=-3.028 degrees ! Estimated noise=789.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275294 Jy ! Component: 100 - total flux cleaned = 0.000275274 Jy ! Component: 150 - total flux cleaned = 0.000234153 Jy ! Component: 200 - total flux cleaned = 0.000195426 Jy ! Total flux subtracted in 200 components = 0.000195426 Jy ! Clean residual min=-0.002180 max=0.002367 Jy/beam ! Clean residual mean=0.000001 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0950944 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.0950944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082699Jy sigma=0.000670 ! Fit after self-cal, rms=0.082720Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, -120). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174899 Jy ! Component: 100 - total flux cleaned = 0.0018785 Jy ! Component: 150 - total flux cleaned = 0.00191054 Jy ! Component: 200 - total flux cleaned = 0.00191241 Jy ! Total flux subtracted in 200 components = 0.00191241 Jy ! Clean residual min=-0.002050 max=0.002080 Jy/beam ! Clean residual mean=-0.000000 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0970068 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.0970068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082671Jy sigma=0.000670 ! Fit after self-cal, rms=0.082666Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082666Jy sigma=0.000670 ! Fit after self-cal, rms=0.082824Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=8.076 mas, bpa=-3.165 degrees ! Estimated noise=789.004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736065 Jy ! Component: 100 - total flux cleaned = 0.000818622 Jy ! Component: 150 - total flux cleaned = 0.000938686 Jy ! Component: 200 - total flux cleaned = 0.00102372 Jy ! Total flux subtracted in 200 components = 0.00102372 Jy ! Clean residual min=-0.001991 max=0.002175 Jy/beam ! Clean residual mean=0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0980306 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.0980306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082807Jy sigma=0.000669 ! Fit after self-cal, rms=0.082814Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (94, -79.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144265 Jy ! Component: 100 - total flux cleaned = 0.00157159 Jy ! Component: 150 - total flux cleaned = 0.00179225 Jy ! Component: 200 - total flux cleaned = 0.00201574 Jy ! Total flux subtracted in 200 components = 0.00201574 Jy ! Clean residual min=-0.001796 max=0.001918 Jy/beam ! Clean residual mean=0.000002 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.100046 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 0.100046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082753Jy sigma=0.000668 ! Fit after self-cal, rms=0.082754Jy sigma=0.000668 ! Inverting map ! Added new window around map position (-103.5, -102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126573 Jy ! Component: 100 - total flux cleaned = 0.00130383 Jy ! Component: 150 - total flux cleaned = 0.00145251 Jy ! Component: 200 - total flux cleaned = 0.00155307 Jy ! Total flux subtracted in 200 components = 0.00155307 Jy ! Clean residual min=-0.001835 max=0.001542 Jy/beam ! Clean residual mean=0.000002 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.101599 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 115 components and 0.101599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082693Jy sigma=0.000668 ! Fit after self-cal, rms=0.082689Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082689Jy sigma=0.000668 ! Fit after self-cal, rms=0.082410Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.646 mas, bmaj=13.46 mas, bpa=-0.7277 degrees ! Estimated noise=989.401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000687413 Jy ! Component: 100 - total flux cleaned = 0.0010638 Jy ! Component: 150 - total flux cleaned = 0.00128044 Jy ! Component: 200 - total flux cleaned = 0.00135397 Jy ! Total flux subtracted in 200 components = 0.00135397 Jy ! Clean residual min=-0.001912 max=0.001728 Jy/beam ! Clean residual mean=0.000004 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.102953 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 125 components and 0.102953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082396Jy sigma=0.000668 ! Fit after self-cal, rms=0.082391Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275331 Jy ! Component: 100 - total flux cleaned = 0.000339009 Jy ! Component: 150 - total flux cleaned = 0.000358279 Jy ! Component: 200 - total flux cleaned = 0.000413811 Jy ! Total flux subtracted in 200 components = 0.000413811 Jy ! Clean residual min=-0.001907 max=0.001753 Jy/beam ! Clean residual mean=0.000003 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.103367 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 133 components and 0.103367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082382Jy sigma=0.000668 ! Fit after self-cal, rms=0.082380Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.076 mas, bpa=-3.234 degrees ! Estimated noise=787.194 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.076 at -3.234 degrees (North through East) ! Clean map min=-0.0016969 max=0.08178 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.696 mas, bmaj=7.155 mas, bpa=-3.735 degrees ! Estimated noise=1105.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0629671 Jy ! Component: 100 - total flux cleaned = 0.0794569 Jy ! Component: 150 - total flux cleaned = 0.0863153 Jy ! Component: 200 - total flux cleaned = 0.0904391 Jy ! Total flux subtracted in 200 components = 0.0904391 Jy ! Clean residual min=-0.003270 max=0.002964 Jy/beam ! Clean residual mean=0.000004 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.0904391 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0904391 Jy ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.076 mas, bpa=-3.234 degrees ! Estimated noise=787.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00369679 Jy ! Component: 100 - total flux cleaned = 0.00610676 Jy ! Component: 150 - total flux cleaned = 0.00768845 Jy ! Component: 200 - total flux cleaned = 0.00877916 Jy ! Total flux subtracted in 200 components = 0.00877916 Jy ! Clean residual min=-0.001960 max=0.002027 Jy/beam ! Clean residual mean=0.000002 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0992183 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 49 components and 0.0992183 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.646 mas, bmaj=13.46 mas, bpa=-0.7277 degrees ! Estimated noise=989.401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200044 Jy ! Component: 100 - total flux cleaned = 0.00271713 Jy ! Component: 150 - total flux cleaned = 0.00322237 Jy ! Component: 200 - total flux cleaned = 0.00333441 Jy ! Total flux subtracted in 200 components = 0.00333441 Jy ! Clean residual min=-0.002034 max=0.001680 Jy/beam ! Clean residual mean=0.000004 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.102553 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.86816e-05 Jy ! Component: 100 - total flux cleaned = 0.00013227 Jy ! Component: 150 - total flux cleaned = 0.00019168 Jy ! Component: 200 - total flux cleaned = 0.000218805 Jy ! Total flux subtracted in 200 components = 0.000218805 Jy ! Clean residual min=-0.002000 max=0.001709 Jy/beam ! Clean residual mean=0.000004 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.102772 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 81 components and 0.102772 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.076 mas, bpa=-3.234 degrees ! Estimated noise=787.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328896 Jy ! Component: 100 - total flux cleaned = 0.000450473 Jy ! Component: 150 - total flux cleaned = 0.000488285 Jy ! Component: 200 - total flux cleaned = 0.00048814 Jy ! Total flux subtracted in 200 components = 0.00048814 Jy ! Clean residual min=-0.001777 max=0.001613 Jy/beam ! Clean residual mean=0.000001 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.10326 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 101 components and 0.10326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082416Jy sigma=0.000668 ! Fit after self-cal, rms=0.082405Jy sigma=0.000668 wmodel J2333-0131_S_2017_06_15_pus_map.mod ! Writing 101 model components to file: J2333-0131_S_2017_06_15_pus_map.mod wobs J2333-0131_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J2333-0131_S_2017_06_15_pus_uvs.fits wwins J2333-0131_S_2017_06_15_pus_map.win ! wwins: Wrote 4 windows to J2333-0131_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000679079 Jy ! Component: 100 - total flux cleaned = -0.00115285 Jy ! Component: 150 - total flux cleaned = -0.00143577 Jy ! Component: 200 - total flux cleaned = -0.00168002 Jy ! Component: 250 - total flux cleaned = -0.00189008 Jy ! Component: 300 - total flux cleaned = -0.00194146 Jy ! Component: 350 - total flux cleaned = -0.00206668 Jy ! Component: 400 - total flux cleaned = -0.00216514 Jy ! Component: 450 - total flux cleaned = -0.00230942 Jy ! Component: 500 - total flux cleaned = -0.00242751 Jy ! Component: 550 - total flux cleaned = -0.0025663 Jy ! Component: 600 - total flux cleaned = -0.00267914 Jy ! Component: 650 - total flux cleaned = -0.00270133 Jy ! Component: 700 - total flux cleaned = -0.00285425 Jy ! Component: 750 - total flux cleaned = -0.00287534 Jy ! Component: 800 - total flux cleaned = -0.00298196 Jy ! Component: 850 - total flux cleaned = -0.00304529 Jy ! Component: 900 - total flux cleaned = -0.00314857 Jy ! Component: 950 - total flux cleaned = -0.00329169 Jy ! Component: 1000 - total flux cleaned = -0.00341199 Jy ! Component: 1050 - total flux cleaned = -0.00349136 Jy ! Component: 1100 - total flux cleaned = -0.00351108 Jy ! Component: 1150 - total flux cleaned = -0.00368606 Jy ! Component: 1200 - total flux cleaned = -0.00374368 Jy ! Component: 1250 - total flux cleaned = -0.00376244 Jy ! Component: 1300 - total flux cleaned = -0.00380011 Jy ! Component: 1350 - total flux cleaned = -0.0038561 Jy ! Component: 1400 - total flux cleaned = -0.00381927 Jy ! Component: 1450 - total flux cleaned = -0.00391013 Jy ! Component: 1500 - total flux cleaned = -0.00387404 Jy ! Component: 1550 - total flux cleaned = -0.00392774 Jy ! Component: 1600 - total flux cleaned = -0.0038922 Jy ! Component: 1650 - total flux cleaned = -0.00389205 Jy ! Component: 1700 - total flux cleaned = -0.00378791 Jy ! Component: 1750 - total flux cleaned = -0.00383941 Jy ! Component: 1800 - total flux cleaned = -0.00387321 Jy ! Component: 1850 - total flux cleaned = -0.00377217 Jy ! Component: 1900 - total flux cleaned = -0.00380576 Jy ! Component: 1950 - total flux cleaned = -0.00380576 Jy ! Component: 2000 - total flux cleaned = -0.00380587 Jy ! Component: 2050 - total flux cleaned = -0.00383844 Jy ! Component: 2100 - total flux cleaned = -0.00380591 Jy ! Component: 2150 - total flux cleaned = -0.00382201 Jy ! Component: 2200 - total flux cleaned = -0.0037904 Jy ! Component: 2250 - total flux cleaned = -0.00388462 Jy ! Component: 2300 - total flux cleaned = -0.00380646 Jy ! Component: 2350 - total flux cleaned = -0.00388374 Jy ! Component: 2400 - total flux cleaned = -0.00377627 Jy ! Component: 2450 - total flux cleaned = -0.00385228 Jy ! Component: 2500 - total flux cleaned = -0.00380702 Jy ! Component: 2550 - total flux cleaned = -0.00386704 Jy ! Component: 2600 - total flux cleaned = -0.00379273 Jy ! Component: 2650 - total flux cleaned = -0.00383709 Jy ! Component: 2700 - total flux cleaned = -0.00380767 Jy ! Component: 2750 - total flux cleaned = -0.0038512 Jy ! Component: 2800 - total flux cleaned = -0.0038367 Jy ! Component: 2850 - total flux cleaned = -0.00377927 Jy ! Component: 2900 - total flux cleaned = -0.00373663 Jy ! Component: 2950 - total flux cleaned = -0.00370856 Jy ! Component: 3000 - total flux cleaned = -0.00376446 Jy ! Component: 3050 - total flux cleaned = -0.00373653 Jy ! Component: 3100 - total flux cleaned = -0.00380521 Jy ! Component: 3150 - total flux cleaned = -0.00375033 Jy ! Component: 3200 - total flux cleaned = -0.00380471 Jy ! Component: 3250 - total flux cleaned = -0.00384517 Jy ! Component: 3300 - total flux cleaned = -0.00384516 Jy ! Component: 3350 - total flux cleaned = -0.00389859 Jy ! Component: 3400 - total flux cleaned = -0.00388519 Jy ! Component: 3450 - total flux cleaned = -0.00393783 Jy ! Component: 3500 - total flux cleaned = -0.00397704 Jy ! Component: 3550 - total flux cleaned = -0.00397709 Jy ! Component: 3600 - total flux cleaned = -0.0040159 Jy ! Component: 3650 - total flux cleaned = -0.00402868 Jy ! Component: 3700 - total flux cleaned = -0.00402879 Jy ! Component: 3750 - total flux cleaned = -0.00405413 Jy ! Component: 3800 - total flux cleaned = -0.00404172 Jy ! Component: 3850 - total flux cleaned = -0.00409172 Jy ! Component: 3900 - total flux cleaned = -0.00415379 Jy ! Component: 3950 - total flux cleaned = -0.00412892 Jy ! Component: 4000 - total flux cleaned = -0.00417814 Jy ! Component: 4050 - total flux cleaned = -0.00417806 Jy ! Total flux subtracted in 4096 components = -0.00421447 Jy ! Clean residual min=-0.000778 max=0.000696 Jy/beam ! Clean residual mean=0.000000 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.0990452 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 383 components and 0.0990451 Jy ![Exited script file: muppet] wmap "J2333-0131_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.076 at -3.234 degrees (North through East) ! Clean map min=-0.001496 max=0.081721 Jy/beam ! Writing clean map to FITS file: J2333-0131_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0817211 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224576 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.824425 0.824425 1.64885 3.2977 6.5954 13.1908 26.3816 52.7632 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.076 at -3.234 degrees (North through East) ! Clean map min=-0.001496 max=0.081721 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2333-0131_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:29:29 2019