! Started logfile: J2333+3901_S_2017_02_19_pus_uvs.log on Sat May 4 19:02:12 2019 obs J2333+3901_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2333+3901_S_2017_02_19_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.778086 visibilities/baseline/integration-bin. ! Found source: J2333+3901 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 20168 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2333+3901_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 601 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.772897Jy sigma=0.006710 ! Fit after self-cal, rms=0.748966Jy sigma=0.006525 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=4.919 mas, bpa=-3.826 degrees ! Estimated noise=1054.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189618 Jy ! Component: 100 - total flux cleaned = 0.259519 Jy ! Total flux subtracted in 100 components = 0.259519 Jy ! Clean residual min=-0.027945 max=0.101595 Jy/beam ! Clean residual mean=-0.000025 rms=0.008619 Jy/beam ! Combined flux in latest and established models = 0.259519 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.259519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191666Jy sigma=0.001567 ! Fit after self-cal, rms=0.190778Jy sigma=0.001560 ! Inverting map ! Added new window around map position (-21, -40). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0908789 Jy ! Component: 100 - total flux cleaned = 0.134282 Jy ! Total flux subtracted in 100 components = 0.134282 Jy ! Clean residual min=-0.021505 max=0.036551 Jy/beam ! Clean residual mean=-0.000016 rms=0.005162 Jy/beam ! Combined flux in latest and established models = 0.393801 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.393801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137333Jy sigma=0.001105 ! Fit after self-cal, rms=0.127977Jy sigma=0.001023 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385658 Jy ! Component: 100 - total flux cleaned = 0.0631054 Jy ! Total flux subtracted in 100 components = 0.0631054 Jy ! Clean residual min=-0.013000 max=0.017082 Jy/beam ! Clean residual mean=-0.000008 rms=0.003346 Jy/beam ! Combined flux in latest and established models = 0.456906 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 50 components and 0.456906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110439Jy sigma=0.000879 ! Fit after self-cal, rms=0.109427Jy sigma=0.000869 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=5.485 mas, bpa=-3.216 degrees ! Estimated noise=634.664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279948 Jy ! Component: 100 - total flux cleaned = 0.0458462 Jy ! Component: 150 - total flux cleaned = 0.0588032 Jy ! Component: 200 - total flux cleaned = 0.0687097 Jy ! Total flux subtracted in 200 components = 0.0687097 Jy ! Clean residual min=-0.010185 max=0.010112 Jy/beam ! Clean residual mean=-0.000026 rms=0.002749 Jy/beam ! Combined flux in latest and established models = 0.525616 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 95 components and 0.525616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099566Jy sigma=0.000795 ! Fit after self-cal, rms=0.098990Jy sigma=0.000789 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.93 HN 1.01 KP 1.02 ! LA 0.98 MK 1.06 NL 0.88 OV 1.00 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 1.04 KP 1.01 ! LA 0.94 MK 1.04 NL 1.05 OV 1.05 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 1.01 KP 0.88 ! LA 0.76 MK 1.08 NL 1.20 OV 0.96 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.02 HN 0.98 KP 1.00* ! LA 0.80 MK 1.39 NL 1.00* OV 1.04 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.098990Jy sigma=0.000789 ! Fit after self-cal, rms=0.087442Jy sigma=0.000715 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=5.572 mas, bpa=-2.154 degrees ! Estimated noise=630.555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000477106 Jy ! Component: 100 - total flux cleaned = 0.00221778 Jy ! Component: 150 - total flux cleaned = 0.00344563 Jy ! Component: 200 - total flux cleaned = 0.00423947 Jy ! Total flux subtracted in 200 components = 0.00423947 Jy ! Clean residual min=-0.006587 max=0.007397 Jy/beam ! Clean residual mean=-0.000005 rms=0.001754 Jy/beam ! Combined flux in latest and established models = 0.529856 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 101 components and 0.529856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086053Jy sigma=0.000702 ! Fit after self-cal, rms=0.085835Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085835Jy sigma=0.000699 ! Fit after self-cal, rms=0.085332Jy sigma=0.000687 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=5.575 mas, bpa=-2.917 degrees ! Estimated noise=634.192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309682 Jy ! Component: 100 - total flux cleaned = -1.47118e-05 Jy ! Component: 150 - total flux cleaned = 0.000444695 Jy ! Component: 200 - total flux cleaned = 0.000788362 Jy ! Total flux subtracted in 200 components = 0.000788362 Jy ! Clean residual min=-0.004756 max=0.006368 Jy/beam ! Clean residual mean=-0.000007 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.530644 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.530644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084854Jy sigma=0.000682 ! Fit after self-cal, rms=0.084770Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-52.5, -43.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661154 Jy ! Component: 100 - total flux cleaned = 0.00969466 Jy ! Component: 150 - total flux cleaned = 0.0122294 Jy ! Component: 200 - total flux cleaned = 0.0140298 Jy ! Total flux subtracted in 200 components = 0.0140298 Jy ! Clean residual min=-0.004419 max=0.004245 Jy/beam ! Clean residual mean=-0.000004 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.544674 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 134 components and 0.544674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084120Jy sigma=0.000674 ! Fit after self-cal, rms=0.084037Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084037Jy sigma=0.000673 ! Fit after self-cal, rms=0.084096Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=5.571 mas, bpa=-3.13 degrees ! Estimated noise=633.655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212285 Jy ! Component: 100 - total flux cleaned = 0.00387612 Jy ! Component: 150 - total flux cleaned = 0.00560577 Jy ! Component: 200 - total flux cleaned = 0.00703998 Jy ! Total flux subtracted in 200 components = 0.00703998 Jy ! Clean residual min=-0.003863 max=0.003766 Jy/beam ! Clean residual mean=-0.000002 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.551714 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 149 components and 0.551714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083821Jy sigma=0.000670 ! Fit after self-cal, rms=0.083789Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000788513 Jy ! Component: 100 - total flux cleaned = 0.00213263 Jy ! Component: 150 - total flux cleaned = 0.00317326 Jy ! Component: 200 - total flux cleaned = 0.00418926 Jy ! Total flux subtracted in 200 components = 0.00418926 Jy ! Clean residual min=-0.003662 max=0.003540 Jy/beam ! Clean residual mean=-0.000002 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.555903 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 165 components and 0.555903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083644Jy sigma=0.000668 ! Fit after self-cal, rms=0.083623Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083623Jy sigma=0.000668 ! Fit after self-cal, rms=0.083584Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.02 mas, bmaj=8.557 mas, bpa=0.8759 degrees ! Estimated noise=806.828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477856 Jy ! Component: 100 - total flux cleaned = 0.0074792 Jy ! Component: 150 - total flux cleaned = 0.00944403 Jy ! Component: 200 - total flux cleaned = 0.0108749 Jy ! Total flux subtracted in 200 components = 0.0108749 Jy ! Clean residual min=-0.004548 max=0.005193 Jy/beam ! Clean residual mean=-0.000000 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.566778 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 182 components and 0.566778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083527Jy sigma=0.000667 ! Fit after self-cal, rms=0.083498Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014057 Jy ! Component: 100 - total flux cleaned = 0.00258684 Jy ! Component: 150 - total flux cleaned = 0.00366586 Jy ! Component: 200 - total flux cleaned = 0.00445596 Jy ! Total flux subtracted in 200 components = 0.00445596 Jy ! Clean residual min=-0.004292 max=0.005372 Jy/beam ! Clean residual mean=0.000001 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.571234 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 195 components and 0.571234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083509Jy sigma=0.000666 ! Fit after self-cal, rms=0.083490Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=5.572 mas, bpa=-3.248 degrees ! Estimated noise=633.385 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 5.572 at -3.248 degrees (North through East) ! Clean map min=-0.0033949 max=0.23351 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=4.948 mas, bpa=-3.787 degrees ! Estimated noise=1071.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206231 Jy ! Component: 100 - total flux cleaned = 0.306714 Jy ! Component: 150 - total flux cleaned = 0.366826 Jy ! Component: 200 - total flux cleaned = 0.405935 Jy ! Total flux subtracted in 200 components = 0.405935 Jy ! Clean residual min=-0.010142 max=0.021684 Jy/beam ! Clean residual mean=-0.000009 rms=0.003233 Jy/beam ! Combined flux in latest and established models = 0.405935 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.405935 Jy ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=5.572 mas, bpa=-3.248 degrees ! Estimated noise=633.385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351962 Jy ! Component: 100 - total flux cleaned = 0.058107 Jy ! Component: 150 - total flux cleaned = 0.0743434 Jy ! Component: 200 - total flux cleaned = 0.08652 Jy ! Total flux subtracted in 200 components = 0.08652 Jy ! Clean residual min=-0.005721 max=0.009132 Jy/beam ! Clean residual mean=-0.000021 rms=0.001761 Jy/beam ! Combined flux in latest and established models = 0.492455 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 72 components and 0.492455 Jy ! Inverting map ! Added new window around map position (-17, -37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103708 Jy ! Component: 100 - total flux cleaned = 0.0188193 Jy ! Component: 150 - total flux cleaned = 0.026076 Jy ! Component: 200 - total flux cleaned = 0.0323939 Jy ! Total flux subtracted in 200 components = 0.0323939 Jy ! Clean residual min=-0.004367 max=0.004729 Jy/beam ! Clean residual mean=-0.000012 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 0.524849 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 103 components and 0.524849 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.02 mas, bmaj=8.557 mas, bpa=0.8759 degrees ! Estimated noise=806.828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101551 Jy ! Component: 100 - total flux cleaned = 0.0179396 Jy ! Component: 150 - total flux cleaned = 0.024226 Jy ! Component: 200 - total flux cleaned = 0.0293585 Jy ! Total flux subtracted in 200 components = 0.0293585 Jy ! Clean residual min=-0.005014 max=0.005706 Jy/beam ! Clean residual mean=-0.000011 rms=0.001704 Jy/beam ! Combined flux in latest and established models = 0.554207 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423093 Jy ! Component: 100 - total flux cleaned = 0.00774337 Jy ! Component: 150 - total flux cleaned = 0.0106773 Jy ! Component: 200 - total flux cleaned = 0.0131548 Jy ! Total flux subtracted in 200 components = 0.0131548 Jy ! Clean residual min=-0.004492 max=0.005351 Jy/beam ! Clean residual mean=-0.000004 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.567362 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 193 components and 0.567362 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=5.572 mas, bpa=-3.248 degrees ! Estimated noise=633.385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138406 Jy ! Component: 100 - total flux cleaned = 0.0025778 Jy ! Component: 150 - total flux cleaned = 0.00332888 Jy ! Component: 200 - total flux cleaned = 0.00408569 Jy ! Total flux subtracted in 200 components = 0.00408569 Jy ! Clean residual min=-0.002916 max=0.003674 Jy/beam ! Clean residual mean=-0.000000 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.571448 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 211 components and 0.571448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083486Jy sigma=0.000666 ! Fit after self-cal, rms=0.083412Jy sigma=0.000666 wmodel J2333+3901_S_2017_02_19_pus_map.mod ! Writing 211 model components to file: J2333+3901_S_2017_02_19_pus_map.mod wobs J2333+3901_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2333+3901_S_2017_02_19_pus_uvs.fits wwins J2333+3901_S_2017_02_19_pus_map.win ! wwins: Wrote 4 windows to J2333+3901_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154439 Jy ! Component: 100 - total flux cleaned = 0.00258853 Jy ! Component: 150 - total flux cleaned = 0.0036294 Jy ! Component: 200 - total flux cleaned = 0.00437627 Jy ! Component: 250 - total flux cleaned = 0.00495145 Jy ! Component: 300 - total flux cleaned = 0.0055075 Jy ! Component: 350 - total flux cleaned = 0.00586711 Jy ! Component: 400 - total flux cleaned = 0.00608496 Jy ! Component: 450 - total flux cleaned = 0.00621285 Jy ! Component: 500 - total flux cleaned = 0.00642132 Jy ! Component: 550 - total flux cleaned = 0.00666305 Jy ! Component: 600 - total flux cleaned = 0.00674136 Jy ! Component: 650 - total flux cleaned = 0.00693472 Jy ! Component: 700 - total flux cleaned = 0.00712284 Jy ! Component: 750 - total flux cleaned = 0.00719659 Jy ! Component: 800 - total flux cleaned = 0.0074869 Jy ! Component: 850 - total flux cleaned = 0.00770031 Jy ! Component: 900 - total flux cleaned = 0.0079099 Jy ! Component: 950 - total flux cleaned = 0.00821984 Jy ! Component: 1000 - total flux cleaned = 0.00852408 Jy ! Component: 1050 - total flux cleaned = 0.00885571 Jy ! Component: 1100 - total flux cleaned = 0.00911671 Jy ! Component: 1150 - total flux cleaned = 0.00946832 Jy ! Component: 1200 - total flux cleaned = 0.00965683 Jy ! Component: 1250 - total flux cleaned = 0.00993595 Jy ! Component: 1300 - total flux cleaned = 0.01021 Jy ! Component: 1350 - total flux cleaned = 0.0104201 Jy ! Component: 1400 - total flux cleaned = 0.0106847 Jy ! Component: 1450 - total flux cleaned = 0.0107717 Jy ! Component: 1500 - total flux cleaned = 0.0108864 Jy ! Component: 1550 - total flux cleaned = 0.0110833 Jy ! Component: 1600 - total flux cleaned = 0.0111667 Jy ! Component: 1650 - total flux cleaned = 0.0113029 Jy ! Component: 1700 - total flux cleaned = 0.0113032 Jy ! Component: 1750 - total flux cleaned = 0.011383 Jy ! Component: 1800 - total flux cleaned = 0.0115666 Jy ! Component: 1850 - total flux cleaned = 0.0115664 Jy ! Component: 1900 - total flux cleaned = 0.0117183 Jy ! Component: 1950 - total flux cleaned = 0.0117934 Jy ! Component: 2000 - total flux cleaned = 0.0119168 Jy ! Component: 2050 - total flux cleaned = 0.011917 Jy ! Component: 2100 - total flux cleaned = 0.0119898 Jy ! Component: 2150 - total flux cleaned = 0.0120132 Jy ! Component: 2200 - total flux cleaned = 0.0121303 Jy ! Component: 2250 - total flux cleaned = 0.012177 Jy ! Component: 2300 - total flux cleaned = 0.0122222 Jy ! Component: 2350 - total flux cleaned = 0.0122901 Jy ! Component: 2400 - total flux cleaned = 0.0122906 Jy ! Component: 2450 - total flux cleaned = 0.0123351 Jy ! Component: 2500 - total flux cleaned = 0.0125097 Jy ! Component: 2550 - total flux cleaned = 0.0125741 Jy ! Component: 2600 - total flux cleaned = 0.0126595 Jy ! Component: 2650 - total flux cleaned = 0.0127649 Jy ! Component: 2700 - total flux cleaned = 0.0128069 Jy ! Component: 2750 - total flux cleaned = 0.0128684 Jy ! Component: 2800 - total flux cleaned = 0.0130111 Jy ! Component: 2850 - total flux cleaned = 0.0130912 Jy ! Component: 2900 - total flux cleaned = 0.0131705 Jy ! Component: 2950 - total flux cleaned = 0.0131904 Jy ! Component: 3000 - total flux cleaned = 0.0132684 Jy ! Component: 3050 - total flux cleaned = 0.0133835 Jy ! Component: 3100 - total flux cleaned = 0.0134214 Jy ! Component: 3150 - total flux cleaned = 0.013459 Jy ! Component: 3200 - total flux cleaned = 0.0135521 Jy ! Component: 3250 - total flux cleaned = 0.0136078 Jy ! Component: 3300 - total flux cleaned = 0.0137542 Jy ! Component: 3350 - total flux cleaned = 0.0137902 Jy ! Component: 3400 - total flux cleaned = 0.0139157 Jy ! Component: 3450 - total flux cleaned = 0.0139688 Jy ! Component: 3500 - total flux cleaned = 0.0140919 Jy ! Component: 3550 - total flux cleaned = 0.0141267 Jy ! Component: 3600 - total flux cleaned = 0.0142479 Jy ! Component: 3650 - total flux cleaned = 0.0143334 Jy ! Component: 3700 - total flux cleaned = 0.0144014 Jy ! Component: 3750 - total flux cleaned = 0.0145024 Jy ! Component: 3800 - total flux cleaned = 0.0145526 Jy ! Component: 3850 - total flux cleaned = 0.0146852 Jy ! Component: 3900 - total flux cleaned = 0.014767 Jy ! Component: 3950 - total flux cleaned = 0.0148316 Jy ! Component: 4000 - total flux cleaned = 0.0148479 Jy ! Component: 4050 - total flux cleaned = 0.0150393 Jy ! Total flux subtracted in 4096 components = 0.0150236 Jy ! Clean residual min=-0.000889 max=0.000925 Jy/beam ! Clean residual mean=-0.000000 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.586472 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 527 components and 0.586472 Jy ![Exited script file: muppet] wmap "J2333+3901_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 5.572 at -3.248 degrees (North through East) ! Clean map min=-0.001678 max=0.23708 Jy/beam ! Writing clean map to FITS file: J2333+3901_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.237079 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000293334 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.371185 0.371185 0.742369 1.48474 2.96948 5.93895 11.8779 23.7558 47.5116 95.0233 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.237 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 5.572 at -3.248 degrees (North through East) ! Clean map min=-0.001678 max=0.23708 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2333+3901_S_2017_02_19_pus_uvs.log closed on Sat May 4 19:02:17 2019