! Started logfile: J2332-4118_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:26:32 2019 obs J2332-4118_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2332-4118_S_2017_01_16_pus_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.455864 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2332-4118 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 5908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2332-4118_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 222 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 222 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 222 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 338 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.890315Jy sigma=0.004312 ! Fit after self-cal, rms=0.860354Jy sigma=0.004191 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=30.64 mas, bpa=25.23 degrees ! Estimated noise=4077.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.169824 Jy ! Component: 100 - total flux cleaned = 0.225598 Jy ! Total flux subtracted in 100 components = 0.225598 Jy ! Clean residual min=-0.020785 max=0.034559 Jy/beam ! Clean residual mean=-0.001000 rms=0.007617 Jy/beam ! Combined flux in latest and established models = 0.225598 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.225598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.450754Jy sigma=0.000712 ! Fit after self-cal, rms=0.450762Jy sigma=0.000711 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=29.37 mas, bpa=24.75 degrees ! Estimated noise=1867.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357212 Jy ! Component: 100 - total flux cleaned = 0.0553275 Jy ! Component: 150 - total flux cleaned = 0.0674376 Jy ! Component: 200 - total flux cleaned = 0.0756172 Jy ! Total flux subtracted in 200 components = 0.0756172 Jy ! Clean residual min=-0.009065 max=0.009180 Jy/beam ! Clean residual mean=-0.000360 rms=0.002830 Jy/beam ! Combined flux in latest and established models = 0.301215 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 100 components and 0.301215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444381Jy sigma=0.000660 ! Fit after self-cal, rms=0.444434Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.01 ! LA 1.04 MK 1.00* NL 1.06 OV 1.00 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.99 ! LA 0.97 MK 1.00* NL 1.21 OV 1.05 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.08 ! LA 1.01 MK 1.00* NL 1.10 OV 0.96 ! PT 0.91 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.00* KP 1.27 ! LA 0.26 MK 1.00* NL 1.00* OV 0.88 ! PT 0.91 SC 0.91 ! ! ! Fit before self-cal, rms=0.444434Jy sigma=0.000660 ! Fit after self-cal, rms=0.246003Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=30.24 mas, bpa=24.76 degrees ! Estimated noise=1872.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249337 Jy ! Component: 100 - total flux cleaned = 0.00369436 Jy ! Component: 150 - total flux cleaned = 0.00460779 Jy ! Component: 200 - total flux cleaned = 0.00535567 Jy ! Total flux subtracted in 200 components = 0.00535567 Jy ! Clean residual min=-0.003698 max=0.004965 Jy/beam ! Clean residual mean=0.000083 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.306571 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 116 components and 0.306571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245775Jy sigma=0.000641 ! Fit after self-cal, rms=0.245506Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245506Jy sigma=0.000641 ! Fit after self-cal, rms=0.246353Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=30.3 mas, bpa=24.77 degrees ! Estimated noise=1881.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137829 Jy ! Component: 100 - total flux cleaned = 0.00213369 Jy ! Component: 150 - total flux cleaned = 0.00265634 Jy ! Component: 200 - total flux cleaned = 0.00312917 Jy ! Total flux subtracted in 200 components = 0.00312917 Jy ! Clean residual min=-0.003500 max=0.005018 Jy/beam ! Clean residual mean=0.000089 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.3097 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 0.3097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246202Jy sigma=0.000641 ! Fit after self-cal, rms=0.246200Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404163 Jy ! Component: 100 - total flux cleaned = 0.000531667 Jy ! Component: 150 - total flux cleaned = 0.000558959 Jy ! Component: 200 - total flux cleaned = 0.000608165 Jy ! Total flux subtracted in 200 components = 0.000608165 Jy ! Clean residual min=-0.003424 max=0.005076 Jy/beam ! Clean residual mean=0.000094 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.310309 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 142 components and 0.310309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246177Jy sigma=0.000641 ! Fit after self-cal, rms=0.246175Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246175Jy sigma=0.000641 ! Fit after self-cal, rms=0.256699Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=30.37 mas, bpa=24.79 degrees ! Estimated noise=1898.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214306 Jy ! Component: 100 - total flux cleaned = 0.00257183 Jy ! Component: 150 - total flux cleaned = 0.00282786 Jy ! Component: 200 - total flux cleaned = 0.00304514 Jy ! Total flux subtracted in 200 components = 0.00304514 Jy ! Clean residual min=-0.003538 max=0.005238 Jy/beam ! Clean residual mean=0.000094 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.313354 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 166 components and 0.313354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256524Jy sigma=0.000641 ! Fit after self-cal, rms=0.256540Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339649 Jy ! Component: 100 - total flux cleaned = 0.000361258 Jy ! Component: 150 - total flux cleaned = 0.000361374 Jy ! Component: 200 - total flux cleaned = 0.000379586 Jy ! Total flux subtracted in 200 components = 0.000379586 Jy ! Clean residual min=-0.003422 max=0.005209 Jy/beam ! Clean residual mean=0.000097 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.313733 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 179 components and 0.313733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256522Jy sigma=0.000641 ! Fit after self-cal, rms=0.256521Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256521Jy sigma=0.000641 ! Fit after self-cal, rms=0.258740Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.748 mas, bmaj=45.68 mas, bpa=11.78 degrees ! Estimated noise=2193.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240432 Jy ! Component: 100 - total flux cleaned = 0.00324822 Jy ! Component: 150 - total flux cleaned = 0.00343596 Jy ! Component: 200 - total flux cleaned = 0.00347521 Jy ! Total flux subtracted in 200 components = 0.00347521 Jy ! Clean residual min=-0.004137 max=0.005412 Jy/beam ! Clean residual mean=0.000157 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.317208 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 194 components and 0.317208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258565Jy sigma=0.000641 ! Fit after self-cal, rms=0.258565Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157897 Jy ! Component: 100 - total flux cleaned = 0.000220276 Jy ! Component: 150 - total flux cleaned = 0.00020233 Jy ! Component: 200 - total flux cleaned = 0.00021813 Jy ! Total flux subtracted in 200 components = 0.00021813 Jy ! Clean residual min=-0.004017 max=0.005382 Jy/beam ! Clean residual mean=0.000159 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.317427 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 203 components and 0.317427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258553Jy sigma=0.000641 ! Fit after self-cal, rms=0.258551Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=30.44 mas, bpa=24.8 degrees ! Estimated noise=1914.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 30.44 at 24.8 degrees (North through East) ! Clean map min=-0.003334 max=0.22849 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.764 mas, bmaj=32.11 mas, bpa=25.3 degrees ! Estimated noise=4088.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170011 Jy ! Component: 100 - total flux cleaned = 0.224715 Jy ! Component: 150 - total flux cleaned = 0.254197 Jy ! Component: 200 - total flux cleaned = 0.271796 Jy ! Total flux subtracted in 200 components = 0.271796 Jy ! Clean residual min=-0.012463 max=0.015964 Jy/beam ! Clean residual mean=-0.000311 rms=0.004117 Jy/beam ! Combined flux in latest and established models = 0.271796 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 65 model components to the UV plane model. ! The established model now contains 65 components and 0.271796 Jy ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=30.44 mas, bpa=24.8 degrees ! Estimated noise=1914.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23, -111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155051 Jy ! Component: 100 - total flux cleaned = 0.0237753 Jy ! Component: 150 - total flux cleaned = 0.0294767 Jy ! Component: 200 - total flux cleaned = 0.0336933 Jy ! Total flux subtracted in 200 components = 0.0336933 Jy ! Clean residual min=-0.004739 max=0.003719 Jy/beam ! Clean residual mean=-0.000027 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.30549 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 127 components and 0.30549 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.748 mas, bmaj=45.68 mas, bpa=11.78 degrees ! Estimated noise=2193.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004067 Jy ! Component: 100 - total flux cleaned = 0.0056542 Jy ! Component: 150 - total flux cleaned = 0.00665629 Jy ! Component: 200 - total flux cleaned = 0.00743457 Jy ! Total flux subtracted in 200 components = 0.00743457 Jy ! Clean residual min=-0.003552 max=0.004345 Jy/beam ! Clean residual mean=0.000083 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.312924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215308 Jy ! Component: 100 - total flux cleaned = 0.000356676 Jy ! Component: 150 - total flux cleaned = 0.000361091 Jy ! Component: 200 - total flux cleaned = 0.000323014 Jy ! Total flux subtracted in 200 components = 0.000323014 Jy ! Clean residual min=-0.003390 max=0.004299 Jy/beam ! Clean residual mean=0.000090 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.313247 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 187 components and 0.313247 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=30.44 mas, bpa=24.8 degrees ! Estimated noise=1914.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.52988e-05 Jy ! Component: 100 - total flux cleaned = -1.86403e-06 Jy ! Component: 150 - total flux cleaned = -6.76559e-07 Jy ! Component: 200 - total flux cleaned = -6.11708e-05 Jy ! Total flux subtracted in 200 components = -6.11708e-05 Jy ! Clean residual min=-0.003463 max=0.004062 Jy/beam ! Clean residual mean=0.000060 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.313186 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 208 components and 0.313186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258421Jy sigma=0.000640 ! Fit after self-cal, rms=0.258395Jy sigma=0.000640 wmodel J2332-4118_S_2017_01_16_pus_map.mod ! Writing 208 model components to file: J2332-4118_S_2017_01_16_pus_map.mod wobs J2332-4118_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2332-4118_S_2017_01_16_pus_uvs.fits wwins J2332-4118_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J2332-4118_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122802 Jy ! Component: 100 - total flux cleaned = 0.00107311 Jy ! Component: 150 - total flux cleaned = 0.00126353 Jy ! Component: 200 - total flux cleaned = 0.00165682 Jy ! Component: 250 - total flux cleaned = 0.00206609 Jy ! Component: 300 - total flux cleaned = 0.00244983 Jy ! Component: 350 - total flux cleaned = 0.00273819 Jy ! Component: 400 - total flux cleaned = 0.00287549 Jy ! Component: 450 - total flux cleaned = 0.00303935 Jy ! Component: 500 - total flux cleaned = 0.00319581 Jy ! Component: 550 - total flux cleaned = 0.00328726 Jy ! Component: 600 - total flux cleaned = 0.00340533 Jy ! Component: 650 - total flux cleaned = 0.00351943 Jy ! Component: 700 - total flux cleaned = 0.00363016 Jy ! Component: 750 - total flux cleaned = 0.00381886 Jy ! Component: 800 - total flux cleaned = 0.00392429 Jy ! Component: 850 - total flux cleaned = 0.00400212 Jy ! Component: 900 - total flux cleaned = 0.00412964 Jy ! Component: 950 - total flux cleaned = 0.00420496 Jy ! Component: 1000 - total flux cleaned = 0.00433004 Jy ! Component: 1050 - total flux cleaned = 0.00447855 Jy ! Component: 1100 - total flux cleaned = 0.00462557 Jy ! Component: 1150 - total flux cleaned = 0.00477168 Jy ! Component: 1200 - total flux cleaned = 0.00494056 Jy ! Component: 1250 - total flux cleaned = 0.00503653 Jy ! Component: 1300 - total flux cleaned = 0.00510819 Jy ! Component: 1350 - total flux cleaned = 0.00515598 Jy ! Component: 1400 - total flux cleaned = 0.00520374 Jy ! Component: 1450 - total flux cleaned = 0.00520378 Jy ! Component: 1500 - total flux cleaned = 0.00525165 Jy ! Component: 1550 - total flux cleaned = 0.00532373 Jy ! Component: 1600 - total flux cleaned = 0.00537195 Jy ! Component: 1650 - total flux cleaned = 0.00542018 Jy ! Component: 1700 - total flux cleaned = 0.00549245 Jy ! Component: 1750 - total flux cleaned = 0.00556535 Jy ! Component: 1800 - total flux cleaned = 0.00554118 Jy ! Component: 1850 - total flux cleaned = 0.00561411 Jy ! Component: 1900 - total flux cleaned = 0.00566331 Jy ! Component: 1950 - total flux cleaned = 0.00571298 Jy ! Component: 2000 - total flux cleaned = 0.00573786 Jy ! Component: 2050 - total flux cleaned = 0.00578769 Jy ! Component: 2100 - total flux cleaned = 0.00588797 Jy ! Component: 2150 - total flux cleaned = 0.00598902 Jy ! Component: 2200 - total flux cleaned = 0.00603969 Jy ! Component: 2250 - total flux cleaned = 0.00614191 Jy ! Component: 2300 - total flux cleaned = 0.0061933 Jy ! Component: 2350 - total flux cleaned = 0.00632281 Jy ! Component: 2400 - total flux cleaned = 0.00640112 Jy ! Component: 2450 - total flux cleaned = 0.00650662 Jy ! Component: 2500 - total flux cleaned = 0.0065332 Jy ! Component: 2550 - total flux cleaned = 0.00661348 Jy ! Component: 2600 - total flux cleaned = 0.00669411 Jy ! Component: 2650 - total flux cleaned = 0.00677571 Jy ! Component: 2700 - total flux cleaned = 0.0068308 Jy ! Component: 2750 - total flux cleaned = 0.00691402 Jy ! Component: 2800 - total flux cleaned = 0.00697035 Jy ! Component: 2850 - total flux cleaned = 0.00702712 Jy ! Component: 2900 - total flux cleaned = 0.00711301 Jy ! Component: 2950 - total flux cleaned = 0.00714212 Jy ! Component: 3000 - total flux cleaned = 0.00722982 Jy ! Component: 3050 - total flux cleaned = 0.00734807 Jy ! Component: 3100 - total flux cleaned = 0.00743815 Jy ! Component: 3150 - total flux cleaned = 0.00749895 Jy ! Component: 3200 - total flux cleaned = 0.00759128 Jy ! Component: 3250 - total flux cleaned = 0.0076229 Jy ! Component: 3300 - total flux cleaned = 0.00771713 Jy ! Component: 3350 - total flux cleaned = 0.00778086 Jy ! Component: 3400 - total flux cleaned = 0.00784517 Jy ! Component: 3450 - total flux cleaned = 0.0079427 Jy ! Component: 3500 - total flux cleaned = 0.00800887 Jy ! Component: 3550 - total flux cleaned = 0.00810926 Jy ! Component: 3600 - total flux cleaned = 0.0082108 Jy ! Component: 3650 - total flux cleaned = 0.00831368 Jy ! Component: 3700 - total flux cleaned = 0.00845195 Jy ! Component: 3750 - total flux cleaned = 0.00859251 Jy ! Component: 3800 - total flux cleaned = 0.0086995 Jy ! Component: 3850 - total flux cleaned = 0.00884357 Jy ! Component: 3900 - total flux cleaned = 0.00898973 Jy ! Component: 3950 - total flux cleaned = 0.00910137 Jy ! Component: 4000 - total flux cleaned = 0.0092521 Jy ! Component: 4050 - total flux cleaned = 0.00936648 Jy ! Total flux subtracted in 4096 components = 0.00948219 Jy ! Clean residual min=-0.002043 max=0.002939 Jy/beam ! Clean residual mean=0.000004 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.322668 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 437 components and 0.322668 Jy ![Exited script file: muppet] wmap "J2332-4118_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 30.44 at 24.8 degrees (North through East) ! Clean map min=-0.0033737 max=0.22989 Jy/beam ! Writing clean map to FITS file: J2332-4118_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.229888 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000766654 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00047 1.00047 2.00094 4.00189 8.00377 16.0075 32.0151 64.0302 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.229 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 30.44 at 24.8 degrees (North through East) ! Clean map min=-0.0033737 max=0.22989 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2332-4118_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:26:38 2019