! Started logfile: J2332+0838_S_2017_02_24_pus_uvs.log on Sat May 4 11:38:18 2019 obs J2332+0838_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2332+0838_S_2017_02_24_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.957407 visibilities/baseline/integration-bin. ! Found source: J2332+0838 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 14476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2332+0838_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 274 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.765703Jy sigma=0.011719 ! Fit after self-cal, rms=0.757285Jy sigma=0.011675 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=7.024 mas, bpa=-3.611 degrees ! Estimated noise=940.193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.176983 Jy ! Component: 100 - total flux cleaned = 0.217004 Jy ! Total flux subtracted in 100 components = 0.217004 Jy ! Clean residual min=-0.011464 max=0.017341 Jy/beam ! Clean residual mean=-0.000032 rms=0.003430 Jy/beam ! Combined flux in latest and established models = 0.217004 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.217004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106173Jy sigma=0.002129 ! Fit after self-cal, rms=0.106133Jy sigma=0.002129 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.424 mas, bmaj=7.859 mas, bpa=-3.241 degrees ! Estimated noise=693.657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170383 Jy ! Component: 100 - total flux cleaned = 0.0251417 Jy ! Component: 150 - total flux cleaned = 0.0297972 Jy ! Component: 200 - total flux cleaned = 0.0321342 Jy ! Total flux subtracted in 200 components = 0.0321342 Jy ! Clean residual min=-0.012284 max=0.019412 Jy/beam ! Clean residual mean=0.000010 rms=0.004422 Jy/beam ! Combined flux in latest and established models = 0.249138 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.249138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099671Jy sigma=0.002294 ! Fit after self-cal, rms=0.099637Jy sigma=0.002294 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 4.28 HN 1.02 KP 0.91 ! LA 0.90 MK 1.01 NL 0.96 OV 1.02 ! PT 0.92 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.87 HN 1.05 KP 0.88 ! LA 0.86 MK 0.98 NL 0.94 OV 1.04 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 8.22 HN 1.02 KP 0.96 ! LA 0.96 MK 1.03 NL 1.05 OV 0.95 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.90 HN 0.98 KP 1.00* ! LA 0.87 MK 1.09 NL 1.00* OV 0.96 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.099637Jy sigma=0.002294 ! Fit after self-cal, rms=0.487605Jy sigma=0.000985 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=7.639 mas, bpa=-2.532 degrees ! Estimated noise=759.835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203106 Jy ! Component: 100 - total flux cleaned = 0.0290702 Jy ! Component: 150 - total flux cleaned = 0.0331021 Jy ! Component: 200 - total flux cleaned = 0.0340229 Jy ! Total flux subtracted in 200 components = 0.0340229 Jy ! Clean residual min=-0.014946 max=0.011303 Jy/beam ! Clean residual mean=0.000021 rms=0.002937 Jy/beam ! Combined flux in latest and established models = 0.283161 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 31 components and 0.283161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.480804Jy sigma=0.001008 ! Fit after self-cal, rms=0.481097Jy sigma=0.001004 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.481097Jy sigma=0.001004 ! Fit after self-cal, rms=0.470976Jy sigma=0.000780 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=7.65 mas, bpa=-2.67 degrees ! Estimated noise=776.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637524 Jy ! Component: 100 - total flux cleaned = 0.00966124 Jy ! Component: 150 - total flux cleaned = 0.0110995 Jy ! Component: 200 - total flux cleaned = 0.0112955 Jy ! Total flux subtracted in 200 components = 0.0112955 Jy ! Clean residual min=-0.007277 max=0.008819 Jy/beam ! Clean residual mean=-0.000001 rms=0.001691 Jy/beam ! Combined flux in latest and established models = 0.294457 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.294457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.469832Jy sigma=0.000782 ! Fit after self-cal, rms=0.469829Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00788192 Jy ! Component: 100 - total flux cleaned = 0.00765089 Jy ! Component: 150 - total flux cleaned = 0.00669826 Jy ! Component: 200 - total flux cleaned = 0.00597279 Jy ! Total flux subtracted in 200 components = 0.00597279 Jy ! Clean residual min=-0.006972 max=0.005326 Jy/beam ! Clean residual mean=0.000001 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.300429 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.300429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.469047Jy sigma=0.000778 ! Fit after self-cal, rms=0.469037Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.469037Jy sigma=0.000777 ! Fit after self-cal, rms=0.496572Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=7.622 mas, bpa=-2.847 degrees ! Estimated noise=795.573 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00703991 Jy ! Component: 100 - total flux cleaned = 0.0104719 Jy ! Component: 150 - total flux cleaned = 0.0116342 Jy ! Component: 200 - total flux cleaned = 0.0118139 Jy ! Total flux subtracted in 200 components = 0.0118139 Jy ! Clean residual min=-0.006537 max=0.005476 Jy/beam ! Clean residual mean=-0.000006 rms=0.001634 Jy/beam ! Combined flux in latest and established models = 0.312243 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 65 components and 0.312243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.495414Jy sigma=0.000774 ! Fit after self-cal, rms=0.495410Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000963895 Jy ! Component: 100 - total flux cleaned = 0.000800775 Jy ! Component: 150 - total flux cleaned = 0.00065163 Jy ! Component: 200 - total flux cleaned = 0.000515085 Jy ! Total flux subtracted in 200 components = 0.000515085 Jy ! Clean residual min=-0.006479 max=0.005449 Jy/beam ! Clean residual mean=-0.000006 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.312758 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 76 components and 0.312758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.495143Jy sigma=0.000774 ! Fit after self-cal, rms=0.495145Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.495145Jy sigma=0.000774 ! Fit after self-cal, rms=0.514768Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.401 mas, bmaj=11.12 mas, bpa=-1.225 degrees ! Estimated noise=1031.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00843486 Jy ! Component: 100 - total flux cleaned = 0.00991069 Jy ! Component: 150 - total flux cleaned = 0.0106714 Jy ! Component: 200 - total flux cleaned = 0.0107581 Jy ! Total flux subtracted in 200 components = 0.0107581 Jy ! Clean residual min=-0.009673 max=0.008545 Jy/beam ! Clean residual mean=-0.000015 rms=0.002824 Jy/beam ! Combined flux in latest and established models = 0.323517 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.323516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513504Jy sigma=0.000775 ! Fit after self-cal, rms=0.513502Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000584803 Jy ! Component: 100 - total flux cleaned = 0.000424287 Jy ! Component: 150 - total flux cleaned = 0.000278573 Jy ! Component: 200 - total flux cleaned = 0.000146049 Jy ! Total flux subtracted in 200 components = 0.000146049 Jy ! Clean residual min=-0.009700 max=0.008510 Jy/beam ! Clean residual mean=-0.000014 rms=0.002822 Jy/beam ! Combined flux in latest and established models = 0.323663 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 0.323663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513300Jy sigma=0.000776 ! Fit after self-cal, rms=0.513301Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=7.605 mas, bpa=-2.892 degrees ! Estimated noise=813.488 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 7.605 at -2.892 degrees (North through East) ! Clean map min=-0.0068493 max=0.26392 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=6.843 mas, bpa=-3.391 degrees ! Estimated noise=1064.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200373 Jy ! Component: 100 - total flux cleaned = 0.250279 Jy ! Component: 150 - total flux cleaned = 0.275706 Jy ! Component: 200 - total flux cleaned = 0.290799 Jy ! Total flux subtracted in 200 components = 0.290799 Jy ! Clean residual min=-0.005495 max=0.007642 Jy/beam ! Clean residual mean=-0.000014 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.290799 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.290799 Jy ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=7.605 mas, bpa=-2.892 degrees ! Estimated noise=813.488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013104 Jy ! Component: 100 - total flux cleaned = 0.0208363 Jy ! Component: 150 - total flux cleaned = 0.026075 Jy ! Component: 200 - total flux cleaned = 0.0281928 Jy ! Total flux subtracted in 200 components = 0.0281928 Jy ! Clean residual min=-0.006519 max=0.006010 Jy/beam ! Clean residual mean=-0.000008 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.318992 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 54 components and 0.318992 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.401 mas, bmaj=11.12 mas, bpa=-1.225 degrees ! Estimated noise=1031.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223043 Jy ! Component: 100 - total flux cleaned = 0.00321588 Jy ! Component: 150 - total flux cleaned = 0.00348264 Jy ! Component: 200 - total flux cleaned = 0.00360354 Jy ! Total flux subtracted in 200 components = 0.00360354 Jy ! Clean residual min=-0.009755 max=0.008985 Jy/beam ! Clean residual mean=-0.000015 rms=0.002823 Jy/beam ! Combined flux in latest and established models = 0.322596 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218903 Jy ! Component: 100 - total flux cleaned = 0.000414948 Jy ! Component: 150 - total flux cleaned = 0.000591411 Jy ! Component: 200 - total flux cleaned = 0.000672558 Jy ! Total flux subtracted in 200 components = 0.000672558 Jy ! Clean residual min=-0.009774 max=0.008862 Jy/beam ! Clean residual mean=-0.000014 rms=0.002815 Jy/beam ! Combined flux in latest and established models = 0.323268 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 80 components and 0.323268 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=7.605 mas, bpa=-2.892 degrees ! Estimated noise=813.488 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.02441e-05 Jy ! Component: 100 - total flux cleaned = -0.000801036 Jy ! Component: 150 - total flux cleaned = -0.00130332 Jy ! Component: 200 - total flux cleaned = -0.00156196 Jy ! Total flux subtracted in 200 components = -0.00156196 Jy ! Clean residual min=-0.006536 max=0.006296 Jy/beam ! Clean residual mean=-0.000007 rms=0.001662 Jy/beam ! Combined flux in latest and established models = 0.321706 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 0.321706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513201Jy sigma=0.000774 ! Fit after self-cal, rms=0.513197Jy sigma=0.000774 wmodel J2332+0838_S_2017_02_24_pus_map.mod ! Writing 96 model components to file: J2332+0838_S_2017_02_24_pus_map.mod wobs J2332+0838_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2332+0838_S_2017_02_24_pus_uvs.fits wwins J2332+0838_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J2332+0838_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.001828 Jy ! Component: 100 - total flux cleaned = -0.00393116 Jy ! Component: 150 - total flux cleaned = -0.00570943 Jy ! Component: 200 - total flux cleaned = -0.00701134 Jy ! Component: 250 - total flux cleaned = -0.00827091 Jy ! Component: 300 - total flux cleaned = -0.0093069 Jy ! Component: 350 - total flux cleaned = -0.0101334 Jy ! Component: 400 - total flux cleaned = -0.0109413 Jy ! Component: 450 - total flux cleaned = -0.0115561 Jy ! Component: 500 - total flux cleaned = -0.0120725 Jy ! Component: 550 - total flux cleaned = -0.0126655 Jy ! Component: 600 - total flux cleaned = -0.0130809 Jy ! Component: 650 - total flux cleaned = -0.0134901 Jy ! Component: 700 - total flux cleaned = -0.0139738 Jy ! Component: 750 - total flux cleaned = -0.0144508 Jy ! Component: 800 - total flux cleaned = -0.0149209 Jy ! Component: 850 - total flux cleaned = -0.0152308 Jy ! Component: 900 - total flux cleaned = -0.0156131 Jy ! Component: 950 - total flux cleaned = -0.0158406 Jy ! Component: 1000 - total flux cleaned = -0.0162883 Jy ! Component: 1050 - total flux cleaned = -0.0165094 Jy ! Component: 1100 - total flux cleaned = -0.0168735 Jy ! Component: 1150 - total flux cleaned = -0.0170171 Jy ! Component: 1200 - total flux cleaned = -0.0171603 Jy ! Component: 1250 - total flux cleaned = -0.017443 Jy ! Component: 1300 - total flux cleaned = -0.0175827 Jy ! Component: 1350 - total flux cleaned = -0.017652 Jy ! Component: 1400 - total flux cleaned = -0.0177891 Jy ! Component: 1450 - total flux cleaned = -0.0179929 Jy ! Component: 1500 - total flux cleaned = -0.017993 Jy ! Component: 1550 - total flux cleaned = -0.0182581 Jy ! Component: 1600 - total flux cleaned = -0.0182577 Jy ! Component: 1650 - total flux cleaned = -0.0183873 Jy ! Component: 1700 - total flux cleaned = -0.0183876 Jy ! Component: 1750 - total flux cleaned = -0.0185159 Jy ! Component: 1800 - total flux cleaned = -0.0187702 Jy ! Component: 1850 - total flux cleaned = -0.0187069 Jy ! Component: 1900 - total flux cleaned = -0.0188318 Jy ! Component: 1950 - total flux cleaned = -0.0189551 Jy ! Component: 2000 - total flux cleaned = -0.0188935 Jy ! Component: 2050 - total flux cleaned = -0.0189547 Jy ! Component: 2100 - total flux cleaned = -0.0190755 Jy ! Component: 2150 - total flux cleaned = -0.0190759 Jy ! Component: 2200 - total flux cleaned = -0.0191948 Jy ! Component: 2250 - total flux cleaned = -0.0191355 Jy ! Component: 2300 - total flux cleaned = -0.0190181 Jy ! Component: 2350 - total flux cleaned = -0.019018 Jy ! Component: 2400 - total flux cleaned = -0.0190181 Jy ! Component: 2450 - total flux cleaned = -0.0190753 Jy ! Component: 2500 - total flux cleaned = -0.0189617 Jy ! Component: 2550 - total flux cleaned = -0.0190742 Jy ! Component: 2600 - total flux cleaned = -0.0190179 Jy ! Component: 2650 - total flux cleaned = -0.0189067 Jy ! Component: 2700 - total flux cleaned = -0.0189064 Jy ! Component: 2750 - total flux cleaned = -0.0186868 Jy ! Component: 2800 - total flux cleaned = -0.0187414 Jy ! Component: 2850 - total flux cleaned = -0.0186328 Jy ! Component: 2900 - total flux cleaned = -0.0184711 Jy ! Component: 2950 - total flux cleaned = -0.018578 Jy ! Component: 3000 - total flux cleaned = -0.0183654 Jy ! Component: 3050 - total flux cleaned = -0.0183653 Jy ! Component: 3100 - total flux cleaned = -0.0182081 Jy ! Component: 3150 - total flux cleaned = -0.0182081 Jy ! Component: 3200 - total flux cleaned = -0.018156 Jy ! Component: 3250 - total flux cleaned = -0.0180529 Jy ! Component: 3300 - total flux cleaned = -0.0180016 Jy ! Component: 3350 - total flux cleaned = -0.017798 Jy ! Component: 3400 - total flux cleaned = -0.0178487 Jy ! Component: 3450 - total flux cleaned = -0.0176479 Jy ! Component: 3500 - total flux cleaned = -0.0175979 Jy ! Component: 3550 - total flux cleaned = -0.0175482 Jy ! Component: 3600 - total flux cleaned = -0.0174497 Jy ! Component: 3650 - total flux cleaned = -0.0173515 Jy ! Component: 3700 - total flux cleaned = -0.0174487 Jy ! Component: 3750 - total flux cleaned = -0.017352 Jy ! Component: 3800 - total flux cleaned = -0.0173518 Jy ! Component: 3850 - total flux cleaned = -0.0172557 Jy ! Component: 3900 - total flux cleaned = -0.0170654 Jy ! Component: 3950 - total flux cleaned = -0.0170654 Jy ! Component: 4000 - total flux cleaned = -0.0170651 Jy ! Component: 4050 - total flux cleaned = -0.0168307 Jy ! Total flux subtracted in 4096 components = -0.0168769 Jy ! Clean residual min=-0.002475 max=0.002660 Jy/beam ! Clean residual mean=-0.000002 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.30483 Jy keep ! Adding 378 model components to the UV plane model. ! The established model now contains 474 components and 0.304829 Jy ![Exited script file: muppet] wmap "J2332+0838_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 7.605 at -2.892 degrees (North through East) ! Clean map min=-0.0056422 max=0.26767 Jy/beam ! Writing clean map to FITS file: J2332+0838_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.267671 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000973966 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0916 1.0916 2.1832 4.36641 8.73281 17.4656 34.9313 69.8625 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.267 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 7.605 at -2.892 degrees (North through East) ! Clean map min=-0.0056422 max=0.26767 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2332+0838_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:38:23 2019