! Started logfile: J2330-4539_X_2017_01_16_pus_uvs.log on Sun Apr  7 14:54:09 2019
obs J2330-4539_X_2017_01_16_pus_uva.fits
! Reading UV FITS file: J2330-4539_X_2017_01_16_pus_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.275096 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2330-4539
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 1309 lines of history.
! 
! Reading 8616 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J2330-4539_X_2017_01_16_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.863978Jy  sigma=0.005568
! Fit after  self-cal, rms=0.840670Jy  sigma=0.005431
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.698 mas, bmaj=10.52 mas, bpa=24.7 degrees
! Estimated noise=1812.99 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0929454 Jy
! Component: 100  -  total flux cleaned = 0.131872 Jy
! Total flux subtracted in 100 components = 0.131872 Jy
! Clean residual min=-0.018962 max=0.019017 Jy/beam
! Clean residual mean=0.000044 rms=0.007358 Jy/beam
! Combined flux in latest and established models = 0.131872 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.131872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.171437Jy  sigma=0.000724
! Fit after  self-cal, rms=0.171264Jy  sigma=0.000723
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.109 mas, bmaj=9.957 mas, bpa=23.99 degrees
! Estimated noise=1296.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0389165 Jy
! Component: 100  -  total flux cleaned = 0.0624395 Jy
! Component: 150  -  total flux cleaned = 0.0773273 Jy
! Component: 200  -  total flux cleaned = 0.0876633 Jy
! Total flux subtracted in 200 components = 0.0876633 Jy
! Clean residual min=-0.029122 max=0.016641 Jy/beam
! Clean residual mean=0.000471 rms=0.009682 Jy/beam
! Combined flux in latest and established models = 0.219536 Jy
! Performing phase self-cal
! Adding 104 model components to the UV plane model.
! The established model now contains 142 components and 0.219536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.153059Jy  sigma=0.000680
! Fit after  self-cal, rms=0.152241Jy  sigma=0.000678
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.12     HN        1.00*    KP        1.13     
!   LA        1.13     MK        1.00*    NL        1.00*    OV        1.00     
!   PT        0.61     SC        1.04     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.02     HN        1.00*    KP        1.11     
!   LA        1.18     MK        1.00*    NL        1.00*    OV        1.06     
!   PT        0.55     SC        1.17     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.09     HN        1.00*    KP        1.06     
!   LA        1.18     MK        1.00*    NL        1.00*    OV        1.06     
!   PT        0.55     SC        1.06     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.09     HN        1.00*    KP        1.09     
!   LA        1.20     MK        1.00*    NL        1.00*    OV        1.01     
!   PT        0.56     SC        1.15     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.10     HN        1.00*    KP        1.14     
!   LA        1.21     MK        1.00*    NL        1.00*    OV        1.02     
!   PT        0.54     SC        1.06     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.08     HN        1.00*    KP        1.14     
!   LA        1.22     MK        1.00*    NL        1.00*    OV        1.06     
!   PT        0.55     SC        0.90     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.05     HN        1.00*    KP        1.06     
!   LA        1.20     MK        1.00*    NL        1.00*    OV        0.99     
!   PT        0.58     SC        0.84     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.04     HN        1.00*    KP        1.13     
!   LA        1.19     MK        1.00*    NL        1.00*    OV        0.99     
!   PT        0.56     SC        0.93     
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.11     HN        1.00*    KP        1.07     
!   LA        1.11     MK        1.00*    NL        1.00*    OV        1.03     
!   PT        0.58     SC        1.01     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.12     HN        1.00*    KP        1.13     
!   LA        1.13     MK        1.00*    NL        1.00*    OV        1.00     
!   PT        0.58     SC        0.92     
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.06     HN        1.00*    KP        1.13     
!   LA        1.18     MK        1.00*    NL        1.00*    OV        1.06     
!   PT        0.57     SC        1.04     
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.08     HN        1.00*    KP        1.06     
!   LA        1.14     MK        1.00*    NL        1.00*    OV        1.09     
!   PT        0.60     SC        1.12     
! 
! 
! Fit before self-cal, rms=0.152241Jy  sigma=0.000678
! Fit after  self-cal, rms=0.107718Jy  sigma=0.000619
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.121 mas, bmaj=10.21 mas, bpa=24.08 degrees
! Estimated noise=1281.87 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0005239 Jy
! Component: 100  -  total flux cleaned = -0.000463909 Jy
! Component: 150  -  total flux cleaned = -0.000326025 Jy
! Component: 200  -  total flux cleaned = -0.000258969 Jy
! Total flux subtracted in 200 components = -0.000258969 Jy
! Clean residual min=-0.002300 max=0.002017 Jy/beam
! Clean residual mean=0.000038 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.219277 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 152 components and 0.219277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107676Jy  sigma=0.000618
! Fit after  self-cal, rms=0.106868Jy  sigma=0.000615
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106868Jy  sigma=0.000615
! Fit after  self-cal, rms=0.106167Jy  sigma=0.000615
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.115 mas, bmaj=10.23 mas, bpa=24.12 degrees
! Estimated noise=1276.17 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000536416 Jy
! Component: 100  -  total flux cleaned = -0.000487183 Jy
! Component: 150  -  total flux cleaned = -0.000469173 Jy
! Component: 200  -  total flux cleaned = -0.00045319 Jy
! Total flux subtracted in 200 components = -0.00045319 Jy
! Clean residual min=-0.001689 max=0.001855 Jy/beam
! Clean residual mean=0.000037 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.218824 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 167 components and 0.218823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106157Jy  sigma=0.000615
! Fit after  self-cal, rms=0.106141Jy  sigma=0.000615
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.14293e-05 Jy
! Component: 100  -  total flux cleaned = 6.68315e-05 Jy
! Component: 150  -  total flux cleaned = 0.000124693 Jy
! Component: 200  -  total flux cleaned = 0.000136979 Jy
! Total flux subtracted in 200 components = 0.000136979 Jy
! Clean residual min=-0.001635 max=0.001839 Jy/beam
! Clean residual mean=0.000041 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.21896 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 174 components and 0.21896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106136Jy  sigma=0.000615
! Fit after  self-cal, rms=0.106133Jy  sigma=0.000615
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106133Jy  sigma=0.000615
! Fit after  self-cal, rms=0.106094Jy  sigma=0.000615
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=10.23 mas, bpa=24.12 degrees
! Estimated noise=1275.55 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000200988 Jy
! Component: 100  -  total flux cleaned = -0.000201136 Jy
! Component: 150  -  total flux cleaned = -0.000227911 Jy
! Component: 200  -  total flux cleaned = -0.000265006 Jy
! Total flux subtracted in 200 components = -0.000265006 Jy
! Clean residual min=-0.001576 max=0.001853 Jy/beam
! Clean residual mean=0.000039 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.218695 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 180 components and 0.218695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106090Jy  sigma=0.000615
! Fit after  self-cal, rms=0.106088Jy  sigma=0.000615
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.29639e-05 Jy
! Component: 100  -  total flux cleaned = -1.68487e-05 Jy
! Component: 150  -  total flux cleaned = -1.7276e-05 Jy
! Component: 200  -  total flux cleaned = -2.81409e-05 Jy
! Total flux subtracted in 200 components = -2.81409e-05 Jy
! Clean residual min=-0.001529 max=0.001844 Jy/beam
! Clean residual mean=0.000039 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.218667 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 188 components and 0.218667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106086Jy  sigma=0.000615
! Fit after  self-cal, rms=0.106084Jy  sigma=0.000615
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106084Jy  sigma=0.000615
! Fit after  self-cal, rms=0.106040Jy  sigma=0.000615
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=21.32 mas, bpa=8.475 degrees
! Estimated noise=1445.46 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000130823 Jy
! Component: 100  -  total flux cleaned = -0.000165098 Jy
! Component: 150  -  total flux cleaned = -0.000157418 Jy
! Component: 200  -  total flux cleaned = -0.000164394 Jy
! Total flux subtracted in 200 components = -0.000164394 Jy
! Clean residual min=-0.001561 max=0.001356 Jy/beam
! Clean residual mean=0.000051 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.218503 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 206 components and 0.218503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106039Jy  sigma=0.000615
! Fit after  self-cal, rms=0.106041Jy  sigma=0.000615
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.7469e-05 Jy
! Component: 100  -  total flux cleaned = -2.37225e-05 Jy
! Component: 150  -  total flux cleaned = -4.2968e-05 Jy
! Component: 200  -  total flux cleaned = -5.54003e-05 Jy
! Total flux subtracted in 200 components = -5.54003e-05 Jy
! Clean residual min=-0.001523 max=0.001356 Jy/beam
! Clean residual mean=0.000052 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.218448 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 218 components and 0.218448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106040Jy  sigma=0.000615
! Fit after  self-cal, rms=0.106041Jy  sigma=0.000615
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=10.23 mas, bpa=24.12 degrees
! Estimated noise=1274.77 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.116 x 10.23 at 24.12 degrees (North through East)
! Clean map  min=-0.0019637  max=0.096273 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.709 mas, bmaj=10.63 mas, bpa=24.72 degrees
! Estimated noise=1803.51 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0913828 Jy
! Component: 100  -  total flux cleaned = 0.129146 Jy
! Component: 150  -  total flux cleaned = 0.150949 Jy
! Component: 200  -  total flux cleaned = 0.166901 Jy
! Total flux subtracted in 200 components = 0.166901 Jy
! Clean residual min=-0.007902 max=0.009205 Jy/beam
! Clean residual mean=-0.000117 rms=0.003105 Jy/beam
! Combined flux in latest and established models = 0.166901 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 71 model components to the UV plane model.
! The established model now contains 71 components and 0.166901 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=10.23 mas, bpa=24.12 degrees
! Estimated noise=1274.77 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194054 Jy
! Component: 100  -  total flux cleaned = 0.0310093 Jy
! Component: 150  -  total flux cleaned = 0.0381425 Jy
! Component: 200  -  total flux cleaned = 0.0426003 Jy
! Total flux subtracted in 200 components = 0.0426003 Jy
! Clean residual min=-0.002634 max=0.002344 Jy/beam
! Clean residual mean=-0.000019 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 0.209502 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 128 components and 0.209502 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=21.32 mas, bpa=8.475 degrees
! Estimated noise=1445.46 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353174 Jy
! Component: 100  -  total flux cleaned = 0.00577867 Jy
! Component: 150  -  total flux cleaned = 0.00727655 Jy
! Component: 200  -  total flux cleaned = 0.00779696 Jy
! Total flux subtracted in 200 components = 0.00779696 Jy
! Clean residual min=-0.001906 max=0.001660 Jy/beam
! Clean residual mean=0.000040 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.217299 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000272577 Jy
! Component: 100  -  total flux cleaned = 0.000522171 Jy
! Component: 150  -  total flux cleaned = 0.000683257 Jy
! Component: 200  -  total flux cleaned = 0.000801148 Jy
! Total flux subtracted in 200 components = 0.000801148 Jy
! Clean residual min=-0.001452 max=0.001576 Jy/beam
! Clean residual mean=0.000050 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.2181 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 191 components and 0.2181 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=10.23 mas, bpa=24.12 degrees
! Estimated noise=1274.77 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000112838 Jy
! Component: 100  -  total flux cleaned = -0.000157563 Jy
! Component: 150  -  total flux cleaned = -0.000185272 Jy
! Component: 200  -  total flux cleaned = -0.000234627 Jy
! Total flux subtracted in 200 components = -0.000234627 Jy
! Clean residual min=-0.001449 max=0.002239 Jy/beam
! Clean residual mean=0.000039 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.217865 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 211 components and 0.217865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106058Jy  sigma=0.000615
! Fit after  self-cal, rms=0.106059Jy  sigma=0.000615
wmodel J2330-4539_X_2017_01_16_pus_map.mod
! Writing 211 model components to file: J2330-4539_X_2017_01_16_pus_map.mod
wobs J2330-4539_X_2017_01_16_pus_uvs.fits
! Writing UV FITS file: J2330-4539_X_2017_01_16_pus_uvs.fits
wwins J2330-4539_X_2017_01_16_pus_map.win
! wwins: Wrote 1 windows to J2330-4539_X_2017_01_16_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000863543 Jy
! Component: 100  -  total flux cleaned = 0.00152227 Jy
! Component: 150  -  total flux cleaned = 0.00186068 Jy
! Component: 200  -  total flux cleaned = 0.00209815 Jy
! Component: 250  -  total flux cleaned = 0.00225583 Jy
! Component: 300  -  total flux cleaned = 0.00233686 Jy
! Component: 350  -  total flux cleaned = 0.00241292 Jy
! Component: 400  -  total flux cleaned = 0.00249966 Jy
! Component: 450  -  total flux cleaned = 0.00255555 Jy
! Component: 500  -  total flux cleaned = 0.00259566 Jy
! Component: 550  -  total flux cleaned = 0.00264684 Jy
! Component: 600  -  total flux cleaned = 0.0026957 Jy
! Component: 650  -  total flux cleaned = 0.00270738 Jy
! Component: 700  -  total flux cleaned = 0.00274151 Jy
! Component: 750  -  total flux cleaned = 0.00275245 Jy
! Component: 800  -  total flux cleaned = 0.00273098 Jy
! Component: 850  -  total flux cleaned = 0.00272053 Jy
! Component: 900  -  total flux cleaned = 0.00276131 Jy
! Component: 950  -  total flux cleaned = 0.00279141 Jy
! Component: 1000  -  total flux cleaned = 0.00285999 Jy
! Component: 1050  -  total flux cleaned = 0.00294668 Jy
! Component: 1100  -  total flux cleaned = 0.00300344 Jy
! Component: 1150  -  total flux cleaned = 0.00304085 Jy
! Component: 1200  -  total flux cleaned = 0.0031054 Jy
! Component: 1250  -  total flux cleaned = 0.00315076 Jy
! Component: 1300  -  total flux cleaned = 0.00317773 Jy
! Component: 1350  -  total flux cleaned = 0.00318659 Jy
! Component: 1400  -  total flux cleaned = 0.00315128 Jy
! Component: 1450  -  total flux cleaned = 0.00313369 Jy
! Component: 1500  -  total flux cleaned = 0.00308994 Jy
! Component: 1550  -  total flux cleaned = 0.00304638 Jy
! Component: 1600  -  total flux cleaned = 0.00302024 Jy
! Component: 1650  -  total flux cleaned = 0.00298552 Jy
! Component: 1700  -  total flux cleaned = 0.00296809 Jy
! Component: 1750  -  total flux cleaned = 0.0029507 Jy
! Component: 1800  -  total flux cleaned = 0.0029244 Jy
! Component: 1850  -  total flux cleaned = 0.00291555 Jy
! Component: 1900  -  total flux cleaned = 0.00290657 Jy
! Component: 1950  -  total flux cleaned = 0.00289756 Jy
! Component: 2000  -  total flux cleaned = 0.00288844 Jy
! Total flux subtracted in 2048 components = 0.00287923 Jy
! Clean residual min=-0.000490 max=0.000483 Jy/beam
! Clean residual mean=0.000001 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.220744 Jy
keep
! Adding 106 model components to the UV plane model.
! The established model now contains 317 components and 0.220744 Jy
![Exited script file: muppet]
wmap "J2330-4539_X_2017_01_16_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.116 x 10.23 at 24.12 degrees (North through East)
! Clean map  min=-0.0011942  max=0.085668 Jy/beam
! Writing clean map to FITS file: J2330-4539_X_2017_01_16_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0856684 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000172377 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.603642 0.603642 1.20728 2.41457 4.82914 9.65827 19.3165 38.6331 77.2662
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.085 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.116 x 10.23 at 24.12 degrees (North through East)
! Clean map  min=-0.0011942  max=0.085668 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J2330-4539_X_2017_01_16_pus_uvs.log closed on Sun Apr  7 14:54:11 2019