! Started logfile: J2330-4539_S_2017_01_21_pus_uvs.log on Sun May 5 16:06:51 2019 obs J2330-4539_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2330-4539_S_2017_01_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.17971 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2330-4539 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 2976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2330-4539_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 579 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 582 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 582 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 864 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.796141Jy sigma=0.003682 ! Fit after self-cal, rms=0.771513Jy sigma=0.003578 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.053 mas, bmaj=6.803 mas, bpa=0.009133 degrees ! Estimated noise=4029.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.190146 Jy ! Component: 100 - total flux cleaned = 0.263449 Jy ! Total flux subtracted in 100 components = 0.263449 Jy ! Clean residual min=-0.028948 max=0.035569 Jy/beam ! Clean residual mean=-0.002291 rms=0.013434 Jy/beam ! Combined flux in latest and established models = 0.263449 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.263449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186758Jy sigma=0.000853 ! Fit after self-cal, rms=0.186611Jy sigma=0.000850 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.289 mas, bmaj=7.579 mas, bpa=-0.8884 degrees ! Estimated noise=3105.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436427 Jy ! Component: 100 - total flux cleaned = 0.015945 Jy ! Component: 150 - total flux cleaned = -0.0093659 Jy ! Component: 200 - total flux cleaned = -0.0268734 Jy ! Total flux subtracted in 200 components = -0.0268734 Jy ! Clean residual min=-0.015814 max=0.015758 Jy/beam ! Clean residual mean=-0.001804 rms=0.009305 Jy/beam ! Combined flux in latest and established models = 0.236575 Jy ! Performing phase self-cal ! Adding 149 model components to the UV plane model. ! The established model now contains 164 components and 0.236576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156506Jy sigma=0.000627 ! Fit after self-cal, rms=0.156371Jy sigma=0.000624 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 171 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.89 ! MK 1.03 NL 1.00* OV 1.13 PT 0.96 ! SC 1.04 ! ! ! Correcting IF 2. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.89 ! MK 1.07 NL 1.00* OV 1.17 PT 0.86 ! SC 1.14 ! ! ! Correcting IF 3. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.84 ! MK 1.18 NL 1.00* OV 0.96 PT 0.91 ! SC 1.04 ! ! ! Correcting IF 4. ! A total of 171 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Fit before self-cal, rms=0.156371Jy sigma=0.000624 ! Fit after self-cal, rms=0.172622Jy sigma=0.000609 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.223 mas, bmaj=6.728 mas, bpa=-0.7077 degrees ! Estimated noise=3700.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184263 Jy ! Component: 100 - total flux cleaned = 0.000988084 Jy ! Component: 150 - total flux cleaned = 0.000258241 Jy ! Component: 200 - total flux cleaned = -0.000148562 Jy ! Total flux subtracted in 200 components = -0.000148562 Jy ! Clean residual min=-0.002096 max=0.002075 Jy/beam ! Clean residual mean=0.000016 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.236427 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 219 components and 0.236427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172270Jy sigma=0.000607 ! Fit after self-cal, rms=0.172674Jy sigma=0.000607 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172674Jy sigma=0.000607 ! Fit after self-cal, rms=0.170435Jy sigma=0.000607 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.218 mas, bmaj=6.723 mas, bpa=-0.6669 degrees ! Estimated noise=3671.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257981 Jy ! Component: 100 - total flux cleaned = -6.15788e-05 Jy ! Component: 150 - total flux cleaned = 0.000408964 Jy ! Component: 200 - total flux cleaned = 0.000320545 Jy ! Total flux subtracted in 200 components = 0.000320545 Jy ! Clean residual min=-0.001443 max=0.001441 Jy/beam ! Clean residual mean=0.000003 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.236747 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 261 components and 0.236747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170299Jy sigma=0.000606 ! Fit after self-cal, rms=0.170309Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000272492 Jy ! Component: 100 - total flux cleaned = -0.000194786 Jy ! Component: 150 - total flux cleaned = 0.000383041 Jy ! Component: 200 - total flux cleaned = 0.00130128 Jy ! Total flux subtracted in 200 components = 0.00130128 Jy ! Clean residual min=-0.001148 max=0.001167 Jy/beam ! Clean residual mean=-0.000012 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.238049 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 293 components and 0.238049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170232Jy sigma=0.000606 ! Fit after self-cal, rms=0.170240Jy sigma=0.000606 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170240Jy sigma=0.000606 ! Fit after self-cal, rms=0.169246Jy sigma=0.000606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.215 mas, bmaj=6.72 mas, bpa=-0.6537 degrees ! Estimated noise=3655.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000860651 Jy ! Component: 100 - total flux cleaned = -0.000589465 Jy ! Component: 150 - total flux cleaned = -0.000591539 Jy ! Component: 200 - total flux cleaned = -0.000837217 Jy ! Total flux subtracted in 200 components = -0.000837217 Jy ! Clean residual min=-0.001000 max=0.001003 Jy/beam ! Clean residual mean=-0.000012 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.237212 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 321 components and 0.237212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169188Jy sigma=0.000606 ! Fit after self-cal, rms=0.169188Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000461002 Jy ! Component: 100 - total flux cleaned = -0.000345934 Jy ! Component: 150 - total flux cleaned = 0.000215029 Jy ! Component: 200 - total flux cleaned = 0.000768598 Jy ! Total flux subtracted in 200 components = 0.000768598 Jy ! Clean residual min=-0.000919 max=0.000925 Jy/beam ! Clean residual mean=0.000000 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.23798 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 354 components and 0.23798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169146Jy sigma=0.000605 ! Fit after self-cal, rms=0.169150Jy sigma=0.000605 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169150Jy sigma=0.000605 ! Fit after self-cal, rms=0.168738Jy sigma=0.000605 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.306 mas, bmaj=22.31 mas, bpa=0.4033 degrees ! Estimated noise=6167.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167907 Jy ! Component: 100 - total flux cleaned = -5.3243e-05 Jy ! Component: 150 - total flux cleaned = 0.000190403 Jy ! Component: 200 - total flux cleaned = 0.000501417 Jy ! Total flux subtracted in 200 components = 0.000501417 Jy ! Clean residual min=-0.000488 max=0.000489 Jy/beam ! Clean residual mean=0.000021 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.238482 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 386 components and 0.238482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168729Jy sigma=0.000605 ! Fit after self-cal, rms=0.168721Jy sigma=0.000605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643345 Jy ! Component: 100 - total flux cleaned = 0.000747324 Jy ! Component: 150 - total flux cleaned = 0.000876853 Jy ! Component: 200 - total flux cleaned = 0.000968605 Jy ! Total flux subtracted in 200 components = 0.000968605 Jy ! Clean residual min=-0.000389 max=0.000400 Jy/beam ! Clean residual mean=-0.000017 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.23945 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 409 components and 0.23945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168714Jy sigma=0.000605 ! Fit after self-cal, rms=0.168711Jy sigma=0.000605 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=6.718 mas, bpa=-0.6456 degrees ! Estimated noise=3649.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.213 x 6.718 at -0.6456 degrees (North through East) ! Clean map min=-0.013074 max=0.16477 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.017 mas, bmaj=6.106 mas, bpa=-0.7012 degrees ! Estimated noise=5014.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160033 Jy ! Component: 100 - total flux cleaned = 0.22093 Jy ! Component: 150 - total flux cleaned = 0.247342 Jy ! Component: 200 - total flux cleaned = 0.252085 Jy ! Total flux subtracted in 200 components = 0.252085 Jy ! Clean residual min=-0.015667 max=0.015444 Jy/beam ! Clean residual mean=-0.001818 rms=0.007626 Jy/beam ! Combined flux in latest and established models = 0.252085 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.252085 Jy ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=6.718 mas, bpa=-0.6456 degrees ! Estimated noise=3649.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00537617 Jy ! Component: 100 - total flux cleaned = -0.0192172 Jy ! Component: 150 - total flux cleaned = -0.0260238 Jy ! Component: 200 - total flux cleaned = -0.0303786 Jy ! Total flux subtracted in 200 components = -0.0303786 Jy ! Clean residual min=-0.013529 max=0.013536 Jy/beam ! Clean residual mean=-0.001376 rms=0.006339 Jy/beam ! Combined flux in latest and established models = 0.221706 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 151 components and 0.221706 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.306 mas, bmaj=22.31 mas, bpa=0.4033 degrees ! Estimated noise=6167.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00475246 Jy ! Component: 100 - total flux cleaned = -0.011731 Jy ! Component: 150 - total flux cleaned = -0.00383373 Jy ! Component: 200 - total flux cleaned = 0.00423651 Jy ! Total flux subtracted in 200 components = 0.00423651 Jy ! Clean residual min=-0.004937 max=0.005858 Jy/beam ! Clean residual mean=0.000473 rms=0.001913 Jy/beam ! Combined flux in latest and established models = 0.225943 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00961896 Jy ! Component: 100 - total flux cleaned = 0.0194103 Jy ! Component: 150 - total flux cleaned = 0.0296528 Jy ! Component: 200 - total flux cleaned = 0.043398 Jy ! Total flux subtracted in 200 components = 0.043398 Jy ! Clean residual min=-0.014322 max=0.014385 Jy/beam ! Clean residual mean=0.001886 rms=0.006117 Jy/beam ! Combined flux in latest and established models = 0.269341 Jy ! Adding 119 model components to the UV plane model. ! The established model now contains 270 components and 0.269341 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=6.718 mas, bpa=-0.6456 degrees ! Estimated noise=3649.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0129922 Jy ! Component: 100 - total flux cleaned = -0.0144439 Jy ! Component: 150 - total flux cleaned = -0.0158853 Jy ! Component: 200 - total flux cleaned = -0.0171949 Jy ! Total flux subtracted in 200 components = -0.0171949 Jy ! Clean residual min=-0.004293 max=0.004246 Jy/beam ! Clean residual mean=-0.000244 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.252146 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 294 components and 0.252146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169031Jy sigma=0.000607 ! Fit after self-cal, rms=0.168986Jy sigma=0.000607 wmodel J2330-4539_S_2017_01_21_pus_map.mod ! Writing 294 model components to file: J2330-4539_S_2017_01_21_pus_map.mod wobs J2330-4539_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2330-4539_S_2017_01_21_pus_uvs.fits wwins J2330-4539_S_2017_01_21_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2330-4539_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.213 x 6.718 at -0.6456 degrees (North through East) ! Clean map min=-0.010021 max=0.086104 Jy/beam ! Writing clean map to FITS file: J2330-4539_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0861039 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00120619 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.20256 4.20256 8.40511 16.8102 33.6204 67.2409 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.213 x 6.718 at -0.6456 degrees (North through East) ! Clean map min=-0.010021 max=0.086104 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2330-4539_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:06:54 2019