! Started logfile: J2330-4539_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:26:28 2019 obs J2330-4539_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2330-4539_S_2017_01_16_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.327969 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2330-4539 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 3424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2330-4539_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 323 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.696690Jy sigma=0.003645 ! Fit after self-cal, rms=0.664587Jy sigma=0.003500 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=43.83 mas, bpa=25.27 degrees ! Estimated noise=3659.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.259353 Jy ! Component: 100 - total flux cleaned = 0.375295 Jy ! Total flux subtracted in 100 components = 0.375295 Jy ! Clean residual min=-0.025903 max=0.052117 Jy/beam ! Clean residual mean=-0.002152 rms=0.011597 Jy/beam ! Combined flux in latest and established models = 0.375295 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.375295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174213Jy sigma=0.000840 ! Fit after self-cal, rms=0.174027Jy sigma=0.000837 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=40.75 mas, bpa=24.81 degrees ! Estimated noise=2412.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731678 Jy ! Component: 100 - total flux cleaned = 0.0868861 Jy ! Component: 150 - total flux cleaned = 0.0853608 Jy ! Component: 200 - total flux cleaned = 0.0831297 Jy ! Total flux subtracted in 200 components = 0.0831297 Jy ! Clean residual min=-0.008754 max=0.008736 Jy/beam ! Clean residual mean=-0.000513 rms=0.003966 Jy/beam ! Combined flux in latest and established models = 0.458425 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 79 components and 0.458425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143069Jy sigma=0.000656 ! Fit after self-cal, rms=0.142906Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.00 ! LA 1.04 MK 1.00* NL 1.00* OV 1.02 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.01 ! LA 0.97 MK 1.00* NL 1.00* OV 1.05 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.03 ! LA 1.01 MK 1.00* NL 1.00* OV 0.99 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.81 ! LA 1.00* MK 1.00* NL 1.00* OV 1.02 ! PT 0.97 SC 0.72 ! ! ! Fit before self-cal, rms=0.142906Jy sigma=0.000655 ! Fit after self-cal, rms=0.124570Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.629 mas, bmaj=41.12 mas, bpa=24.87 degrees ! Estimated noise=2359.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114137 Jy ! Component: 100 - total flux cleaned = 0.000268385 Jy ! Component: 150 - total flux cleaned = -0.000423501 Jy ! Component: 200 - total flux cleaned = -0.000665983 Jy ! Total flux subtracted in 200 components = -0.000665983 Jy ! Clean residual min=-0.001985 max=0.001977 Jy/beam ! Clean residual mean=0.000002 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.457759 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 142 components and 0.457759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124039Jy sigma=0.000638 ! Fit after self-cal, rms=0.123895Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123895Jy sigma=0.000638 ! Fit after self-cal, rms=0.123572Jy sigma=0.000638 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=41.16 mas, bpa=24.88 degrees ! Estimated noise=2354.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.049e-05 Jy ! Component: 100 - total flux cleaned = -0.000162887 Jy ! Component: 150 - total flux cleaned = -0.000618431 Jy ! Component: 200 - total flux cleaned = -0.00114021 Jy ! Total flux subtracted in 200 components = -0.00114021 Jy ! Clean residual min=-0.001427 max=0.001427 Jy/beam ! Clean residual mean=0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.456618 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 195 components and 0.456618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123428Jy sigma=0.000637 ! Fit after self-cal, rms=0.123395Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369322 Jy ! Component: 100 - total flux cleaned = 0.000448442 Jy ! Component: 150 - total flux cleaned = 0.000449839 Jy ! Component: 200 - total flux cleaned = 0.000449571 Jy ! Total flux subtracted in 200 components = 0.000449571 Jy ! Clean residual min=-0.001314 max=0.001335 Jy/beam ! Clean residual mean=-0.000011 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.457068 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 235 components and 0.457068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123308Jy sigma=0.000637 ! Fit after self-cal, rms=0.123278Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123278Jy sigma=0.000637 ! Fit after self-cal, rms=0.122994Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=41.18 mas, bpa=24.89 degrees ! Estimated noise=2351.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136333 Jy ! Component: 100 - total flux cleaned = -0.000656237 Jy ! Component: 150 - total flux cleaned = -0.0010847 Jy ! Component: 200 - total flux cleaned = -0.00143259 Jy ! Total flux subtracted in 200 components = -0.00143259 Jy ! Clean residual min=-0.000946 max=0.000946 Jy/beam ! Clean residual mean=-0.000008 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.455635 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 274 components and 0.455635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122930Jy sigma=0.000637 ! Fit after self-cal, rms=0.122911Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169659 Jy ! Component: 100 - total flux cleaned = 0.000167092 Jy ! Component: 150 - total flux cleaned = 0.000216391 Jy ! Component: 200 - total flux cleaned = 0.000168562 Jy ! Total flux subtracted in 200 components = 0.000168562 Jy ! Clean residual min=-0.000769 max=0.000775 Jy/beam ! Clean residual mean=-0.000010 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.455804 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 314 components and 0.455804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122870Jy sigma=0.000637 ! Fit after self-cal, rms=0.122852Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122852Jy sigma=0.000637 ! Fit after self-cal, rms=0.122787Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.25 mas, bmaj=58.79 mas, bpa=12.82 degrees ! Estimated noise=2730.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000656416 Jy ! Component: 100 - total flux cleaned = -0.0010581 Jy ! Component: 150 - total flux cleaned = -0.00130483 Jy ! Component: 200 - total flux cleaned = -0.00148558 Jy ! Total flux subtracted in 200 components = -0.00148558 Jy ! Clean residual min=-0.000301 max=0.000300 Jy/beam ! Clean residual mean=-0.000007 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.454318 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 359 components and 0.454318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122778Jy sigma=0.000636 ! Fit after self-cal, rms=0.122778Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035405 Jy ! Component: 100 - total flux cleaned = -0.000506065 Jy ! Component: 150 - total flux cleaned = -0.000580065 Jy ! Component: 200 - total flux cleaned = -0.000623929 Jy ! Total flux subtracted in 200 components = -0.000623929 Jy ! Clean residual min=-0.000244 max=0.000239 Jy/beam ! Clean residual mean=-0.000001 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.453694 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 391 components and 0.453694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122772Jy sigma=0.000636 ! Fit after self-cal, rms=0.122768Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=41.2 mas, bpa=24.89 degrees ! Estimated noise=2351.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.611 x 41.2 at 24.89 degrees (North through East) ! Clean map min=-0.004995 max=0.34251 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=44.54 mas, bpa=25.33 degrees ! Estimated noise=3492.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249833 Jy ! Component: 100 - total flux cleaned = 0.365352 Jy ! Component: 150 - total flux cleaned = 0.422476 Jy ! Component: 200 - total flux cleaned = 0.451739 Jy ! Total flux subtracted in 200 components = 0.451739 Jy ! Clean residual min=-0.013940 max=0.013882 Jy/beam ! Clean residual mean=-0.000784 rms=0.004422 Jy/beam ! Combined flux in latest and established models = 0.451739 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.451739 Jy ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=41.2 mas, bpa=24.89 degrees ! Estimated noise=2351.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142628 Jy ! Component: 100 - total flux cleaned = 0.0105981 Jy ! Component: 150 - total flux cleaned = 0.00885447 Jy ! Component: 200 - total flux cleaned = 0.00800607 Jy ! Total flux subtracted in 200 components = 0.00800607 Jy ! Clean residual min=-0.004509 max=0.004482 Jy/beam ! Clean residual mean=-0.000222 rms=0.001963 Jy/beam ! Combined flux in latest and established models = 0.459745 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 86 components and 0.459745 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.25 mas, bmaj=58.79 mas, bpa=12.82 degrees ! Estimated noise=2730.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00164712 Jy ! Component: 100 - total flux cleaned = -0.00167443 Jy ! Component: 150 - total flux cleaned = -0.00289355 Jy ! Component: 200 - total flux cleaned = -0.00484151 Jy ! Total flux subtracted in 200 components = -0.00484151 Jy ! Clean residual min=-0.002272 max=0.002223 Jy/beam ! Clean residual mean=-0.000176 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.454904 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00213539 Jy ! Component: 100 - total flux cleaned = -0.00420764 Jy ! Component: 150 - total flux cleaned = -0.00638232 Jy ! Component: 200 - total flux cleaned = -0.00717198 Jy ! Total flux subtracted in 200 components = -0.00717198 Jy ! Clean residual min=-0.002371 max=0.002329 Jy/beam ! Clean residual mean=-0.000076 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.447732 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 187 components and 0.447731 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=41.2 mas, bpa=24.89 degrees ! Estimated noise=2351.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116306 Jy ! Component: 100 - total flux cleaned = -0.00076679 Jy ! Component: 150 - total flux cleaned = -0.00064343 Jy ! Component: 200 - total flux cleaned = -0.000642041 Jy ! Total flux subtracted in 200 components = -0.000642041 Jy ! Clean residual min=-0.001661 max=0.001652 Jy/beam ! Clean residual mean=-0.000036 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.447089 Jy selfcal ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 254 components and 0.447089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123078Jy sigma=0.000638 ! Fit after self-cal, rms=0.123111Jy sigma=0.000637 wmodel J2330-4539_S_2017_01_16_pus_map.mod ! Writing 254 model components to file: J2330-4539_S_2017_01_16_pus_map.mod wobs J2330-4539_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2330-4539_S_2017_01_16_pus_uvs.fits wwins J2330-4539_S_2017_01_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2330-4539_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.611 x 41.2 at 24.89 degrees (North through East) ! Clean map min=-0.0054814 max=0.33536 Jy/beam ! Writing clean map to FITS file: J2330-4539_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.335356 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000606597 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.542645 0.542645 1.08529 2.17058 4.34116 8.68232 17.3646 34.7293 69.4585 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.335 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.611 x 41.2 at 24.89 degrees (North through East) ! Clean map min=-0.0054814 max=0.33536 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2330-4539_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:26:32 2019