! Started logfile: J2330-3724_S_2017_10_21_pus_uvs.log on Sat May 11 21:08:18 2019 obs J2330-3724_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2330-3724_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.572079 visibilities/baseline/integration-bin. ! Found source: J2330-3724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 9556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2330-3724_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 412 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 286 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 271 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 678 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.564916Jy sigma=0.003706 ! Fit after self-cal, rms=0.406702Jy sigma=0.002544 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=34.44 mas, bpa=-15.57 degrees ! Estimated noise=3137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.865282 Jy ! Component: 100 - total flux cleaned = 1.10107 Jy ! Total flux subtracted in 100 components = 1.10107 Jy ! Clean residual min=-0.074691 max=0.112401 Jy/beam ! Clean residual mean=-0.001061 rms=0.026842 Jy/beam ! Combined flux in latest and established models = 1.10107 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.10107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356224Jy sigma=0.002180 ! Fit after self-cal, rms=0.356184Jy sigma=0.002180 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.055 mas, bmaj=37.42 mas, bpa=-15.75 degrees ! Estimated noise=1349.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186954 Jy ! Component: 100 - total flux cleaned = 0.264451 Jy ! Component: 150 - total flux cleaned = 0.302843 Jy ! Component: 200 - total flux cleaned = 0.314221 Jy ! Total flux subtracted in 200 components = 0.314221 Jy ! Clean residual min=-0.039569 max=0.036979 Jy/beam ! Clean residual mean=-0.000725 rms=0.011574 Jy/beam ! Combined flux in latest and established models = 1.41529 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 89 components and 1.41529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250408Jy sigma=0.001435 ! Fit after self-cal, rms=0.250345Jy sigma=0.001435 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.09 ! LA 1.00 MK 0.99 NL 1.00* OV 0.96 ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.20 KP 1.04 ! LA 0.96 MK 1.00 NL 1.09 OV 0.98 ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.18 KP 1.04 ! LA 0.74 MK 1.02 NL 1.28 OV 0.89 ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 1.00* ! LA 2.54 MK 1.04 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.250345Jy sigma=0.001435 ! Fit after self-cal, rms=0.151385Jy sigma=0.000819 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.133 mas, bmaj=36.76 mas, bpa=-15.84 degrees ! Estimated noise=1383.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0155595 Jy ! Component: 100 - total flux cleaned = -0.0163228 Jy ! Component: 150 - total flux cleaned = -0.0151632 Jy ! Component: 200 - total flux cleaned = -0.0146543 Jy ! Total flux subtracted in 200 components = -0.0146543 Jy ! Clean residual min=-0.014723 max=0.014449 Jy/beam ! Clean residual mean=-0.000029 rms=0.004161 Jy/beam ! Combined flux in latest and established models = 1.40064 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 117 components and 1.40064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143579Jy sigma=0.000788 ! Fit after self-cal, rms=0.143774Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143774Jy sigma=0.000788 ! Fit after self-cal, rms=0.134223Jy sigma=0.000739 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.147 mas, bmaj=36.93 mas, bpa=-15.9 degrees ! Estimated noise=1376.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00625722 Jy ! Component: 100 - total flux cleaned = -0.00731617 Jy ! Component: 150 - total flux cleaned = -0.00806416 Jy ! Component: 200 - total flux cleaned = -0.00856622 Jy ! Total flux subtracted in 200 components = -0.00856622 Jy ! Clean residual min=-0.010815 max=0.008155 Jy/beam ! Clean residual mean=-0.000015 rms=0.002246 Jy/beam ! Combined flux in latest and established models = 1.39207 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 134 components and 1.39207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133601Jy sigma=0.000734 ! Fit after self-cal, rms=0.133570Jy sigma=0.000734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00031509 Jy ! Component: 100 - total flux cleaned = -0.000759773 Jy ! Component: 150 - total flux cleaned = -0.000898302 Jy ! Component: 200 - total flux cleaned = -0.00115076 Jy ! Total flux subtracted in 200 components = -0.00115076 Jy ! Clean residual min=-0.009551 max=0.007333 Jy/beam ! Clean residual mean=-0.000020 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 1.39092 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 143 components and 1.39092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133216Jy sigma=0.000732 ! Fit after self-cal, rms=0.133197Jy sigma=0.000732 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133197Jy sigma=0.000732 ! Fit after self-cal, rms=0.133346Jy sigma=0.000731 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.153 mas, bmaj=36.94 mas, bpa=-15.91 degrees ! Estimated noise=1375.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00423959 Jy ! Component: 100 - total flux cleaned = -0.00516987 Jy ! Component: 150 - total flux cleaned = -0.00575321 Jy ! Component: 200 - total flux cleaned = -0.00596743 Jy ! Total flux subtracted in 200 components = -0.00596743 Jy ! Clean residual min=-0.008247 max=0.006473 Jy/beam ! Clean residual mean=-0.000012 rms=0.001912 Jy/beam ! Combined flux in latest and established models = 1.38495 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 161 components and 1.38495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133098Jy sigma=0.000730 ! Fit after self-cal, rms=0.133087Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03407e-05 Jy ! Component: 100 - total flux cleaned = -8.88334e-05 Jy ! Component: 150 - total flux cleaned = -0.000272961 Jy ! Component: 200 - total flux cleaned = -0.000449557 Jy ! Total flux subtracted in 200 components = -0.000449557 Jy ! Clean residual min=-0.007578 max=0.006257 Jy/beam ! Clean residual mean=-0.000014 rms=0.001844 Jy/beam ! Combined flux in latest and established models = 1.3845 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 171 components and 1.3845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132908Jy sigma=0.000729 ! Fit after self-cal, rms=0.132898Jy sigma=0.000729 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132898Jy sigma=0.000729 ! Fit after self-cal, rms=0.133048Jy sigma=0.000728 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.75 mas, bmaj=42.91 mas, bpa=-8.984 degrees ! Estimated noise=1515.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00324084 Jy ! Component: 100 - total flux cleaned = -0.00473057 Jy ! Component: 150 - total flux cleaned = -0.00483761 Jy ! Component: 200 - total flux cleaned = -0.00493845 Jy ! Total flux subtracted in 200 components = -0.00493845 Jy ! Clean residual min=-0.007779 max=0.006341 Jy/beam ! Clean residual mean=-0.000020 rms=0.002048 Jy/beam ! Combined flux in latest and established models = 1.37956 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 186 components and 1.37956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132981Jy sigma=0.000728 ! Fit after self-cal, rms=0.132974Jy sigma=0.000728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331078 Jy ! Component: 100 - total flux cleaned = -0.00033116 Jy ! Component: 150 - total flux cleaned = -0.000421695 Jy ! Component: 200 - total flux cleaned = -0.000464454 Jy ! Total flux subtracted in 200 components = -0.000464454 Jy ! Clean residual min=-0.007317 max=0.006342 Jy/beam ! Clean residual mean=-0.000023 rms=0.002011 Jy/beam ! Combined flux in latest and established models = 1.3791 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 193 components and 1.3791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132926Jy sigma=0.000728 ! Fit after self-cal, rms=0.132918Jy sigma=0.000727 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.156 mas, bmaj=36.95 mas, bpa=-15.91 degrees ! Estimated noise=1374.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.156 x 36.95 at -15.91 degrees (North through East) ! Clean map min=-0.012176 max=1.1372 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132918Jy sigma=0.000727 ! Fit after self-cal, rms=0.121587Jy sigma=0.000637 ! Inverting map and beam ! Estimated beam: bmin=4.156 mas, bmaj=36.96 mas, bpa=-15.91 degrees ! Estimated noise=1373.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00212394 Jy ! Component: 100 - total flux cleaned = -0.00246328 Jy ! Component: 150 - total flux cleaned = -0.00261748 Jy ! Component: 200 - total flux cleaned = -0.00276208 Jy ! Total flux subtracted in 200 components = -0.00276208 Jy ! Clean residual min=-0.006229 max=0.006129 Jy/beam ! Clean residual mean=-0.000008 rms=0.001695 Jy/beam ! Combined flux in latest and established models = 1.37634 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 211 components and 1.37634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121435Jy sigma=0.000636 ! Fit after self-cal, rms=0.121429Jy sigma=0.000636 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.6953e-06 Jy ! Component: 100 - total flux cleaned = -0.000127832 Jy ! Component: 150 - total flux cleaned = -0.000192598 Jy ! Component: 200 - total flux cleaned = -0.00031768 Jy ! Total flux subtracted in 200 components = -0.00031768 Jy ! Clean residual min=-0.006069 max=0.005989 Jy/beam ! Clean residual mean=-0.000010 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 1.37602 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 223 components and 1.37602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121319Jy sigma=0.000636 ! Fit after self-cal, rms=0.121318Jy sigma=0.000636 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121318Jy sigma=0.000636 ! Fit after self-cal, rms=0.121457Jy sigma=0.000636 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=34.81 mas, bpa=-15.79 degrees ! Estimated noise=3348.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.921525 Jy ! Component: 100 - total flux cleaned = 1.13692 Jy ! Component: 150 - total flux cleaned = 1.23456 Jy ! Component: 200 - total flux cleaned = 1.28877 Jy ! Total flux subtracted in 200 components = 1.28877 Jy ! Clean residual min=-0.014535 max=0.027073 Jy/beam ! Clean residual mean=-0.000249 rms=0.006056 Jy/beam ! Combined flux in latest and established models = 1.28877 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 1.28877 Jy ! Inverting map and beam ! Estimated beam: bmin=4.158 mas, bmaj=36.97 mas, bpa=-15.91 degrees ! Estimated noise=1372.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429896 Jy ! Component: 100 - total flux cleaned = 0.0647456 Jy ! Component: 150 - total flux cleaned = 0.0777594 Jy ! Component: 200 - total flux cleaned = 0.0863715 Jy ! Total flux subtracted in 200 components = 0.0863715 Jy ! Clean residual min=-0.009827 max=0.008713 Jy/beam ! Clean residual mean=-0.000051 rms=0.002563 Jy/beam ! Combined flux in latest and established models = 1.37514 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 123 components and 1.37514 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.77 mas, bmaj=42.95 mas, bpa=-8.966 degrees ! Estimated noise=1512.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347913 Jy ! Component: 100 - total flux cleaned = 0.00409086 Jy ! Component: 150 - total flux cleaned = 0.00391234 Jy ! Component: 200 - total flux cleaned = 0.00390763 Jy ! Total flux subtracted in 200 components = 0.00390763 Jy ! Clean residual min=-0.010464 max=0.007176 Jy/beam ! Clean residual mean=-0.000027 rms=0.002634 Jy/beam ! Combined flux in latest and established models = 1.37905 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.05995e-06 Jy ! Component: 100 - total flux cleaned = -7.32231e-07 Jy ! Component: 150 - total flux cleaned = -0.000372058 Jy ! Component: 200 - total flux cleaned = -0.000487148 Jy ! Total flux subtracted in 200 components = -0.000487148 Jy ! Clean residual min=-0.010278 max=0.006766 Jy/beam ! Clean residual mean=-0.000017 rms=0.002474 Jy/beam ! Combined flux in latest and established models = 1.37856 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 161 components and 1.37856 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.158 mas, bmaj=36.97 mas, bpa=-15.91 degrees ! Estimated noise=1372.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106503 Jy ! Component: 100 - total flux cleaned = -0.00071719 Jy ! Component: 150 - total flux cleaned = -0.000240114 Jy ! Component: 200 - total flux cleaned = 5.468e-05 Jy ! Total flux subtracted in 200 components = 5.468e-05 Jy ! Clean residual min=-0.009535 max=0.006794 Jy/beam ! Clean residual mean=-0.000004 rms=0.002103 Jy/beam ! Combined flux in latest and established models = 1.37862 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 174 components and 1.37862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123093Jy sigma=0.000640 ! Fit after self-cal, rms=0.123030Jy sigma=0.000640 wmodel J2330-3724_S_2017_10_21_pus_map.mod ! Writing 174 model components to file: J2330-3724_S_2017_10_21_pus_map.mod wobs J2330-3724_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2330-3724_S_2017_10_21_pus_uvs.fits wwins J2330-3724_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2330-3724_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.003516 Jy ! Component: 100 - total flux cleaned = -0.0047002 Jy ! Component: 150 - total flux cleaned = -0.00471376 Jy ! Component: 200 - total flux cleaned = -0.00360139 Jy ! Component: 250 - total flux cleaned = -0.00271754 Jy ! Component: 300 - total flux cleaned = -0.00196154 Jy ! Component: 350 - total flux cleaned = -0.00115982 Jy ! Component: 400 - total flux cleaned = -0.000470087 Jy ! Component: 450 - total flux cleaned = -2.82119e-05 Jy ! Component: 500 - total flux cleaned = 0.000539134 Jy ! Component: 550 - total flux cleaned = 0.00108712 Jy ! Component: 600 - total flux cleaned = 0.0014185 Jy ! Component: 650 - total flux cleaned = 0.0017395 Jy ! Component: 700 - total flux cleaned = 0.00192579 Jy ! Component: 750 - total flux cleaned = 0.002109 Jy ! Component: 800 - total flux cleaned = 0.00228769 Jy ! Component: 850 - total flux cleaned = 0.00228761 Jy ! Component: 900 - total flux cleaned = 0.00240074 Jy ! Component: 950 - total flux cleaned = 0.00256655 Jy ! Component: 1000 - total flux cleaned = 0.00240404 Jy ! Component: 1050 - total flux cleaned = 0.00229806 Jy ! Component: 1100 - total flux cleaned = 0.0022992 Jy ! Component: 1150 - total flux cleaned = 0.00209341 Jy ! Component: 1200 - total flux cleaned = 0.00199198 Jy ! Component: 1250 - total flux cleaned = 0.0018917 Jy ! Component: 1300 - total flux cleaned = 0.00184165 Jy ! Component: 1350 - total flux cleaned = 0.00184176 Jy ! Component: 1400 - total flux cleaned = 0.00184176 Jy ! Component: 1450 - total flux cleaned = 0.00188912 Jy ! Component: 1500 - total flux cleaned = 0.00184303 Jy ! Component: 1550 - total flux cleaned = 0.00193566 Jy ! Component: 1600 - total flux cleaned = 0.0021173 Jy ! Component: 1650 - total flux cleaned = 0.00211706 Jy ! Component: 1700 - total flux cleaned = 0.00216147 Jy ! Component: 1750 - total flux cleaned = 0.00220556 Jy ! Component: 1800 - total flux cleaned = 0.00229198 Jy ! Component: 1850 - total flux cleaned = 0.00224918 Jy ! Component: 1900 - total flux cleaned = 0.00224919 Jy ! Component: 1950 - total flux cleaned = 0.00220733 Jy ! Component: 2000 - total flux cleaned = 0.00212481 Jy ! Component: 2050 - total flux cleaned = 0.00208433 Jy ! Component: 2100 - total flux cleaned = 0.00220596 Jy ! Component: 2150 - total flux cleaned = 0.0023262 Jy ! Component: 2200 - total flux cleaned = 0.00236539 Jy ! Component: 2250 - total flux cleaned = 0.00220791 Jy ! Component: 2300 - total flux cleaned = 0.00232532 Jy ! Component: 2350 - total flux cleaned = 0.00232503 Jy ! Component: 2400 - total flux cleaned = 0.00213262 Jy ! Component: 2450 - total flux cleaned = 0.00213275 Jy ! Component: 2500 - total flux cleaned = 0.00213235 Jy ! Component: 2550 - total flux cleaned = 0.00198195 Jy ! Component: 2600 - total flux cleaned = 0.00201931 Jy ! Component: 2650 - total flux cleaned = 0.00190758 Jy ! Component: 2700 - total flux cleaned = 0.0017601 Jy ! Component: 2750 - total flux cleaned = 0.00168696 Jy ! Component: 2800 - total flux cleaned = 0.0016141 Jy ! Component: 2850 - total flux cleaned = 0.00132494 Jy ! Component: 2900 - total flux cleaned = 0.00114545 Jy ! Component: 2950 - total flux cleaned = 0.00100272 Jy ! Component: 3000 - total flux cleaned = 0.00100266 Jy ! Component: 3050 - total flux cleaned = 0.00075491 Jy ! Component: 3100 - total flux cleaned = 0.000648896 Jy ! Component: 3150 - total flux cleaned = 0.000438526 Jy ! Component: 3200 - total flux cleaned = 0.000299 Jy ! Component: 3250 - total flux cleaned = 0.000125009 Jy ! Component: 3300 - total flux cleaned = 2.11965e-05 Jy ! Component: 3350 - total flux cleaned = 2.12741e-05 Jy ! Component: 3400 - total flux cleaned = -4.77589e-05 Jy ! Component: 3450 - total flux cleaned = -0.000116373 Jy ! Component: 3500 - total flux cleaned = -0.000219131 Jy ! Component: 3550 - total flux cleaned = -0.000253061 Jy ! Component: 3600 - total flux cleaned = -0.000354882 Jy ! Component: 3650 - total flux cleaned = -0.000422536 Jy ! Component: 3700 - total flux cleaned = -0.000456219 Jy ! Component: 3750 - total flux cleaned = -0.000523624 Jy ! Component: 3800 - total flux cleaned = -0.000590688 Jy ! Component: 3850 - total flux cleaned = -0.000624111 Jy ! Component: 3900 - total flux cleaned = -0.000690917 Jy ! Component: 3950 - total flux cleaned = -0.000757632 Jy ! Component: 4000 - total flux cleaned = -0.000857334 Jy ! Component: 4050 - total flux cleaned = -0.000890527 Jy ! Total flux subtracted in 4096 components = -0.00095676 Jy ! Clean residual min=-0.001740 max=0.001770 Jy/beam ! Clean residual mean=0.000012 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 1.37766 Jy keep ! Adding 383 model components to the UV plane model. ! The established model now contains 557 components and 1.37766 Jy ![Exited script file: muppet] wmap "J2330-3724_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.158 x 36.97 at -15.91 degrees (North through East) ! Clean map min=-0.0061003 max=1.1621 Jy/beam ! Writing clean map to FITS file: J2330-3724_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.16206 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000717528 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.185239 0.185239 0.370478 0.740957 1.48191 2.96383 5.92765 11.8553 23.7106 47.4212 94.8425 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.162 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.158 x 36.97 at -15.91 degrees (North through East) ! Clean map min=-0.0061003 max=1.1621 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2330-3724_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:08:23 2019