! Started logfile: J2329+0834_S_2017_02_19_pus_uvs.log on Sat May 4 19:02:07 2019 obs J2329+0834_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2329+0834_S_2017_02_19_pus_uva.fits ! AN table 1: 132 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.624074 visibilities/baseline/integration-bin. ! Found source: J2329+0834 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 14828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2329+0834_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 284 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 284 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 284 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 609 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.792321Jy sigma=0.006263 ! Fit after self-cal, rms=0.761384Jy sigma=0.006018 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.664 mas, bmaj=6.679 mas, bpa=-4.554 degrees ! Estimated noise=981.636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.190046 Jy ! Component: 100 - total flux cleaned = 0.231488 Jy ! Total flux subtracted in 100 components = 0.231488 Jy ! Clean residual min=-0.007945 max=0.011562 Jy/beam ! Clean residual mean=-0.000011 rms=0.001967 Jy/beam ! Combined flux in latest and established models = 0.231488 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.231488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099154Jy sigma=0.000718 ! Fit after self-cal, rms=0.099153Jy sigma=0.000718 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=7.188 mas, bpa=-5.221 degrees ! Estimated noise=806.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010467 Jy ! Component: 100 - total flux cleaned = 0.0154975 Jy ! Component: 150 - total flux cleaned = 0.0187822 Jy ! Component: 200 - total flux cleaned = 0.0209916 Jy ! Total flux subtracted in 200 components = 0.0209916 Jy ! Clean residual min=-0.008654 max=0.007624 Jy/beam ! Clean residual mean=-0.000009 rms=0.001690 Jy/beam ! Combined flux in latest and established models = 0.25248 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 34 components and 0.25248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097714Jy sigma=0.000712 ! Fit after self-cal, rms=0.097698Jy sigma=0.000712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.93 HN 1.00 KP 1.06 ! LA 1.02 MK 0.96 NL 0.95 OV 1.05 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.01 KP 1.01 ! LA 0.97 MK 0.98 NL 1.11 OV 1.09 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 0.99 KP 0.88 ! LA 0.78 MK 1.00 NL 1.19 OV 0.98 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.04 HN 0.92 KP 1.00* ! LA 0.80 MK 1.23 NL 1.00* OV 1.02 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.097698Jy sigma=0.000712 ! Fit after self-cal, rms=0.092190Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.995 mas, bmaj=7.233 mas, bpa=-5.028 degrees ! Estimated noise=804.494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, 66). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036901 Jy ! Component: 100 - total flux cleaned = 0.00444988 Jy ! Component: 150 - total flux cleaned = 0.00402455 Jy ! Component: 200 - total flux cleaned = 0.00366226 Jy ! Total flux subtracted in 200 components = 0.00366226 Jy ! Clean residual min=-0.005227 max=0.006037 Jy/beam ! Clean residual mean=-0.000003 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.256142 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 58 components and 0.256142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091683Jy sigma=0.000677 ! Fit after self-cal, rms=0.091678Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091678Jy sigma=0.000676 ! Fit after self-cal, rms=0.089730Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=7.218 mas, bpa=-5.209 degrees ! Estimated noise=806.849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151037 Jy ! Component: 100 - total flux cleaned = -0.00179172 Jy ! Component: 150 - total flux cleaned = -0.0019742 Jy ! Component: 200 - total flux cleaned = -0.0020946 Jy ! Total flux subtracted in 200 components = -0.0020946 Jy ! Clean residual min=-0.002263 max=0.002289 Jy/beam ! Clean residual mean=-0.000002 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.254048 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.254048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089660Jy sigma=0.000659 ! Fit after self-cal, rms=0.089677Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252024 Jy ! Component: 100 - total flux cleaned = -0.000415205 Jy ! Component: 150 - total flux cleaned = -0.000510092 Jy ! Component: 200 - total flux cleaned = -0.000593992 Jy ! Total flux subtracted in 200 components = -0.000593992 Jy ! Clean residual min=-0.002210 max=0.002249 Jy/beam ! Clean residual mean=-0.000002 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.253454 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.253454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089662Jy sigma=0.000659 ! Fit after self-cal, rms=0.089661Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089661Jy sigma=0.000659 ! Fit after self-cal, rms=0.089658Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=7.22 mas, bpa=-5.216 degrees ! Estimated noise=806.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000621211 Jy ! Component: 100 - total flux cleaned = -0.000735393 Jy ! Component: 150 - total flux cleaned = -0.00090447 Jy ! Component: 200 - total flux cleaned = -0.00101119 Jy ! Total flux subtracted in 200 components = -0.00101119 Jy ! Clean residual min=-0.002163 max=0.002219 Jy/beam ! Clean residual mean=-0.000002 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.252442 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 101 components and 0.252442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089639Jy sigma=0.000658 ! Fit after self-cal, rms=0.089640Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248881 Jy ! Component: 100 - total flux cleaned = -0.000324298 Jy ! Component: 150 - total flux cleaned = -0.000427198 Jy ! Component: 200 - total flux cleaned = -0.000474118 Jy ! Total flux subtracted in 200 components = -0.000474118 Jy ! Clean residual min=-0.002148 max=0.002195 Jy/beam ! Clean residual mean=-0.000002 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.251968 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 107 components and 0.251968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089633Jy sigma=0.000658 ! Fit after self-cal, rms=0.089633Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089633Jy sigma=0.000658 ! Fit after self-cal, rms=0.089598Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.703 mas, bmaj=10.06 mas, bpa=-2.795 degrees ! Estimated noise=1085.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000919125 Jy ! Component: 100 - total flux cleaned = -0.00102694 Jy ! Component: 150 - total flux cleaned = -0.00115234 Jy ! Component: 200 - total flux cleaned = -0.00118617 Jy ! Total flux subtracted in 200 components = -0.00118617 Jy ! Clean residual min=-0.002489 max=0.002549 Jy/beam ! Clean residual mean=-0.000004 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.250782 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 116 components and 0.250782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089596Jy sigma=0.000658 ! Fit after self-cal, rms=0.089595Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113047 Jy ! Component: 100 - total flux cleaned = -0.000234031 Jy ! Component: 150 - total flux cleaned = -0.000298983 Jy ! Component: 200 - total flux cleaned = -0.000366698 Jy ! Total flux subtracted in 200 components = -0.000366698 Jy ! Clean residual min=-0.002468 max=0.002514 Jy/beam ! Clean residual mean=-0.000004 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.250416 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 125 components and 0.250416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089596Jy sigma=0.000658 ! Fit after self-cal, rms=0.089596Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.22 mas, bpa=-5.211 degrees ! Estimated noise=805.53 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 7.22 at -5.211 degrees (North through East) ! Clean map min=-0.0020459 max=0.2407 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.677 mas, bmaj=6.706 mas, bpa=-4.586 degrees ! Estimated noise=970.257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.187752 Jy ! Component: 100 - total flux cleaned = 0.228698 Jy ! Component: 150 - total flux cleaned = 0.238949 Jy ! Component: 200 - total flux cleaned = 0.243306 Jy ! Total flux subtracted in 200 components = 0.243306 Jy ! Clean residual min=-0.002498 max=0.002854 Jy/beam ! Clean residual mean=-0.000001 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.243306 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.243306 Jy ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.22 mas, bpa=-5.211 degrees ! Estimated noise=805.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300062 Jy ! Component: 100 - total flux cleaned = 0.00481039 Jy ! Component: 150 - total flux cleaned = 0.00560023 Jy ! Component: 200 - total flux cleaned = 0.0062378 Jy ! Total flux subtracted in 200 components = 0.0062378 Jy ! Clean residual min=-0.002148 max=0.002138 Jy/beam ! Clean residual mean=-0.000002 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.249544 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 44 components and 0.249544 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.703 mas, bmaj=10.06 mas, bpa=-2.795 degrees ! Estimated noise=1085.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000927938 Jy ! Component: 100 - total flux cleaned = 0.00106783 Jy ! Component: 150 - total flux cleaned = 0.00103235 Jy ! Component: 200 - total flux cleaned = 0.00100237 Jy ! Total flux subtracted in 200 components = 0.00100237 Jy ! Clean residual min=-0.002507 max=0.002569 Jy/beam ! Clean residual mean=-0.000004 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.250547 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.51182e-05 Jy ! Component: 100 - total flux cleaned = -6.69115e-05 Jy ! Component: 150 - total flux cleaned = -0.000103734 Jy ! Component: 200 - total flux cleaned = -0.000136873 Jy ! Total flux subtracted in 200 components = -0.000136873 Jy ! Clean residual min=-0.002482 max=0.002533 Jy/beam ! Clean residual mean=-0.000004 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.25041 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 85 components and 0.25041 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.22 mas, bpa=-5.211 degrees ! Estimated noise=805.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.83286e-05 Jy ! Component: 100 - total flux cleaned = -0.000139189 Jy ! Component: 150 - total flux cleaned = -0.000204618 Jy ! Component: 200 - total flux cleaned = -0.00024335 Jy ! Total flux subtracted in 200 components = -0.00024335 Jy ! Clean residual min=-0.002133 max=0.002162 Jy/beam ! Clean residual mean=-0.000002 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.250166 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.250166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089596Jy sigma=0.000658 ! Fit after self-cal, rms=0.089593Jy sigma=0.000658 wmodel J2329+0834_S_2017_02_19_pus_map.mod ! Writing 100 model components to file: J2329+0834_S_2017_02_19_pus_map.mod wobs J2329+0834_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2329+0834_S_2017_02_19_pus_uvs.fits wwins J2329+0834_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J2329+0834_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156119 Jy ! Component: 100 - total flux cleaned = 4.80129e-05 Jy ! Component: 150 - total flux cleaned = -5.42026e-05 Jy ! Component: 200 - total flux cleaned = -0.000118993 Jy ! Component: 250 - total flux cleaned = -0.000181957 Jy ! Component: 300 - total flux cleaned = -0.000182607 Jy ! Component: 350 - total flux cleaned = -0.000242104 Jy ! Component: 400 - total flux cleaned = -0.000271074 Jy ! Component: 450 - total flux cleaned = -0.000356216 Jy ! Component: 500 - total flux cleaned = -0.000384207 Jy ! Component: 550 - total flux cleaned = -0.000384175 Jy ! Component: 600 - total flux cleaned = -0.000383933 Jy ! Component: 650 - total flux cleaned = -0.00035768 Jy ! Component: 700 - total flux cleaned = -0.000306732 Jy ! Component: 750 - total flux cleaned = -0.000306963 Jy ! Component: 800 - total flux cleaned = -0.000282564 Jy ! Component: 850 - total flux cleaned = -0.000209543 Jy ! Component: 900 - total flux cleaned = -0.000137231 Jy ! Component: 950 - total flux cleaned = -6.59709e-05 Jy ! Component: 1000 - total flux cleaned = 4.29363e-06 Jy ! Component: 1050 - total flux cleaned = 7.3645e-05 Jy ! Component: 1100 - total flux cleaned = 0.000164898 Jy ! Component: 1150 - total flux cleaned = 0.000254767 Jy ! Component: 1200 - total flux cleaned = 0.000277497 Jy ! Component: 1250 - total flux cleaned = 0.000473828 Jy ! Component: 1300 - total flux cleaned = 0.00051707 Jy ! Component: 1350 - total flux cleaned = 0.000686701 Jy ! Component: 1400 - total flux cleaned = 0.000790937 Jy ! Component: 1450 - total flux cleaned = 0.000811496 Jy ! Component: 1500 - total flux cleaned = 0.000872866 Jy ! Component: 1550 - total flux cleaned = 0.000934018 Jy ! Component: 1600 - total flux cleaned = 0.000994082 Jy ! Component: 1650 - total flux cleaned = 0.0011128 Jy ! Component: 1700 - total flux cleaned = 0.00113234 Jy ! Component: 1750 - total flux cleaned = 0.00124861 Jy ! Component: 1800 - total flux cleaned = 0.00130607 Jy ! Component: 1850 - total flux cleaned = 0.00141992 Jy ! Component: 1900 - total flux cleaned = 0.00143846 Jy ! Component: 1950 - total flux cleaned = 0.00153136 Jy ! Component: 2000 - total flux cleaned = 0.00160502 Jy ! Component: 2050 - total flux cleaned = 0.00162354 Jy ! Component: 2100 - total flux cleaned = 0.00165963 Jy ! Component: 2150 - total flux cleaned = 0.00174927 Jy ! Component: 2200 - total flux cleaned = 0.00173127 Jy ! Component: 2250 - total flux cleaned = 0.00173112 Jy ! Component: 2300 - total flux cleaned = 0.0016959 Jy ! Component: 2350 - total flux cleaned = 0.00174808 Jy ! Component: 2400 - total flux cleaned = 0.00171346 Jy ! Component: 2450 - total flux cleaned = 0.00173064 Jy ! Component: 2500 - total flux cleaned = 0.00176477 Jy ! Component: 2550 - total flux cleaned = 0.00173121 Jy ! Component: 2600 - total flux cleaned = 0.00174783 Jy ! Component: 2650 - total flux cleaned = 0.0017809 Jy ! Component: 2700 - total flux cleaned = 0.00179714 Jy ! Component: 2750 - total flux cleaned = 0.00179711 Jy ! Component: 2800 - total flux cleaned = 0.00181346 Jy ! Component: 2850 - total flux cleaned = 0.00182932 Jy ! Component: 2900 - total flux cleaned = 0.00182926 Jy ! Component: 2950 - total flux cleaned = 0.00182912 Jy ! Component: 3000 - total flux cleaned = 0.00182897 Jy ! Component: 3050 - total flux cleaned = 0.00187539 Jy ! Component: 3100 - total flux cleaned = 0.00190593 Jy ! Component: 3150 - total flux cleaned = 0.00184483 Jy ! Component: 3200 - total flux cleaned = 0.00187509 Jy ! Component: 3250 - total flux cleaned = 0.00183003 Jy ! Component: 3300 - total flux cleaned = 0.00187488 Jy ! Component: 3350 - total flux cleaned = 0.00184535 Jy ! Component: 3400 - total flux cleaned = 0.00187463 Jy ! Component: 3450 - total flux cleaned = 0.0018454 Jy ! Component: 3500 - total flux cleaned = 0.00183107 Jy ! Component: 3550 - total flux cleaned = 0.00187421 Jy ! Component: 3600 - total flux cleaned = 0.00185993 Jy ! Component: 3650 - total flux cleaned = 0.00183161 Jy ! Component: 3700 - total flux cleaned = 0.00185972 Jy ! Component: 3750 - total flux cleaned = 0.00184577 Jy ! Component: 3800 - total flux cleaned = 0.00184602 Jy ! Component: 3850 - total flux cleaned = 0.00185972 Jy ! Component: 3900 - total flux cleaned = 0.00181882 Jy ! Component: 3950 - total flux cleaned = 0.00180524 Jy ! Component: 4000 - total flux cleaned = 0.00179176 Jy ! Component: 4050 - total flux cleaned = 0.00176487 Jy ! Total flux subtracted in 4096 components = 0.00179166 Jy ! Clean residual min=-0.000780 max=0.000708 Jy/beam ! Clean residual mean=-0.000002 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.251958 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 409 components and 0.251958 Jy ![Exited script file: muppet] wmap "J2329+0834_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 7.22 at -5.211 degrees (North through East) ! Clean map min=-0.0017328 max=0.24086 Jy/beam ! Writing clean map to FITS file: J2329+0834_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.240858 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000248605 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.309649 0.309649 0.619298 1.2386 2.47719 4.95438 9.90877 19.8175 39.6351 79.2701 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.24 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 7.22 at -5.211 degrees (North through East) ! Clean map min=-0.0017328 max=0.24086 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2329+0834_S_2017_02_19_pus_uvs.log closed on Sat May 4 19:02:12 2019