! Started logfile: J2328+2937_S_2017_10_21_pus_uvs.log on Sat May 11 21:08:13 2019 obs J2328+2937_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2328+2937_S_2017_10_21_pus_uva.fits ! AN table 1: 194 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.572022 visibilities/baseline/integration-bin. ! Found source: J2328+2937 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15980 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2328+2937_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 747 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 673 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 757 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1309 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999915Jy sigma=0.010931 ! Fit after self-cal, rms=0.962317Jy sigma=0.010521 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=9.983 mas, bpa=-6.868 degrees ! Estimated noise=1182.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317401 Jy ! Component: 100 - total flux cleaned = 0.038566 Jy ! Total flux subtracted in 100 components = 0.038566 Jy ! Clean residual min=-0.004554 max=0.004614 Jy/beam ! Clean residual mean=0.000003 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.038566 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.038566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070120Jy sigma=0.000684 ! Fit after self-cal, rms=0.068589Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.219 mas, bmaj=10.41 mas, bpa=-7.986 degrees ! Estimated noise=651.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264928 Jy ! Component: 100 - total flux cleaned = 0.00379867 Jy ! Component: 150 - total flux cleaned = 0.00408315 Jy ! Component: 200 - total flux cleaned = 0.00414917 Jy ! Total flux subtracted in 200 components = 0.00414917 Jy ! Clean residual min=-0.003148 max=0.002953 Jy/beam ! Clean residual mean=0.000007 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0427152 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.0427152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068437Jy sigma=0.000666 ! Fit after self-cal, rms=0.068428Jy sigma=0.000665 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.99 KP 1.19 ! LA 1.06 MK 1.16 NL 1.00 OV 1.06 ! PT 0.80 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.03 HN 1.07 KP 1.08 ! LA 0.98 MK 1.04 NL 0.94 OV 1.06 ! PT 0.90 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.15 HN 1.02 KP 1.10 ! LA 0.81 MK 1.03 NL 1.14 OV 1.03 ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.85 KP 1.00* ! LA 0.76 MK 0.89 NL 1.00* OV 1.00* ! PT 0.63 ! ! ! Fit before self-cal, rms=0.068428Jy sigma=0.000665 ! Fit after self-cal, rms=0.067278Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.234 mas, bmaj=10.64 mas, bpa=-7.609 degrees ! Estimated noise=664.879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.26334e-05 Jy ! Component: 100 - total flux cleaned = 8.32314e-05 Jy ! Component: 150 - total flux cleaned = 8.45099e-05 Jy ! Component: 200 - total flux cleaned = 0.000101209 Jy ! Total flux subtracted in 200 components = 0.000101209 Jy ! Clean residual min=-0.001662 max=0.002073 Jy/beam ! Clean residual mean=0.000004 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0428164 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.0428164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067260Jy sigma=0.000664 ! Fit after self-cal, rms=0.067337Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067337Jy sigma=0.000663 ! Fit after self-cal, rms=0.067153Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.282 mas, bmaj=10.58 mas, bpa=-7.831 degrees ! Estimated noise=664.397 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.13987e-05 Jy ! Component: 100 - total flux cleaned = 3.0625e-05 Jy ! Component: 150 - total flux cleaned = -1.98989e-06 Jy ! Component: 200 - total flux cleaned = -1.84335e-05 Jy ! Total flux subtracted in 200 components = -1.84335e-05 Jy ! Clean residual min=-0.001561 max=0.001658 Jy/beam ! Clean residual mean=0.000003 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0427979 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.0427979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067146Jy sigma=0.000661 ! Fit after self-cal, rms=0.067390Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021937 Jy ! Component: 100 - total flux cleaned = 0.000249498 Jy ! Component: 150 - total flux cleaned = 0.000242099 Jy ! Component: 200 - total flux cleaned = 0.000242093 Jy ! Total flux subtracted in 200 components = 0.000242093 Jy ! Clean residual min=-0.001788 max=0.001748 Jy/beam ! Clean residual mean=0.000004 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.04304 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.04304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067386Jy sigma=0.000661 ! Fit after self-cal, rms=0.067390Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067390Jy sigma=0.000661 ! Fit after self-cal, rms=0.068340Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=10.59 mas, bpa=-7.778 degrees ! Estimated noise=665.629 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.85863e-06 Jy ! Component: 100 - total flux cleaned = -1.95121e-05 Jy ! Component: 150 - total flux cleaned = -3.94342e-05 Jy ! Component: 200 - total flux cleaned = -5.56634e-05 Jy ! Total flux subtracted in 200 components = -5.56634e-05 Jy ! Clean residual min=-0.001612 max=0.001709 Jy/beam ! Clean residual mean=0.000003 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0429844 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.0429844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068336Jy sigma=0.000660 ! Fit after self-cal, rms=0.068545Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126395 Jy ! Component: 100 - total flux cleaned = 0.000127049 Jy ! Component: 150 - total flux cleaned = 0.0001271 Jy ! Component: 200 - total flux cleaned = 0.000119845 Jy ! Total flux subtracted in 200 components = 0.000119845 Jy ! Clean residual min=-0.001647 max=0.001825 Jy/beam ! Clean residual mean=0.000003 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0431042 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.0431042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068540Jy sigma=0.000660 ! Fit after self-cal, rms=0.068534Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068534Jy sigma=0.000660 ! Fit after self-cal, rms=0.069375Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=11.77 mas, bpa=-13.4 degrees ! Estimated noise=748.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.04878e-05 Jy ! Component: 100 - total flux cleaned = -7.09803e-05 Jy ! Component: 150 - total flux cleaned = -8.57399e-05 Jy ! Component: 200 - total flux cleaned = -9.75361e-05 Jy ! Total flux subtracted in 200 components = -9.75361e-05 Jy ! Clean residual min=-0.001809 max=0.001697 Jy/beam ! Clean residual mean=0.000005 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0430067 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.0430067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069372Jy sigma=0.000660 ! Fit after self-cal, rms=0.069501Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.18059e-05 Jy ! Component: 100 - total flux cleaned = 2.69199e-05 Jy ! Component: 150 - total flux cleaned = 1.71159e-05 Jy ! Component: 200 - total flux cleaned = 2.09512e-05 Jy ! Total flux subtracted in 200 components = 2.09512e-05 Jy ! Clean residual min=-0.001863 max=0.001697 Jy/beam ! Clean residual mean=0.000005 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0430276 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.0430276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069500Jy sigma=0.000660 ! Fit after self-cal, rms=0.069510Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.322 mas, bmaj=10.58 mas, bpa=-7.735 degrees ! Estimated noise=666.634 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.322 x 10.58 at -7.735 degrees (North through East) ! Clean map min=-0.0016741 max=0.041056 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.643 mas, bmaj=10.1 mas, bpa=-6.44 degrees ! Estimated noise=1187.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322457 Jy ! Component: 100 - total flux cleaned = 0.0394832 Jy ! Component: 150 - total flux cleaned = 0.0416358 Jy ! Component: 200 - total flux cleaned = 0.041973 Jy ! Total flux subtracted in 200 components = 0.041973 Jy ! Clean residual min=-0.003171 max=0.003330 Jy/beam ! Clean residual mean=0.000002 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.041973 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.041973 Jy ! Inverting map and beam ! Estimated beam: bmin=4.322 mas, bmaj=10.58 mas, bpa=-7.735 degrees ! Estimated noise=666.634 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391679 Jy ! Component: 100 - total flux cleaned = 0.000582228 Jy ! Component: 150 - total flux cleaned = 0.000688927 Jy ! Component: 200 - total flux cleaned = 0.000743023 Jy ! Total flux subtracted in 200 components = 0.000743023 Jy ! Clean residual min=-0.001713 max=0.001724 Jy/beam ! Clean residual mean=0.000004 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.042716 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 38 components and 0.042716 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=11.77 mas, bpa=-13.4 degrees ! Estimated noise=748.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221605 Jy ! Component: 100 - total flux cleaned = 0.000192948 Jy ! Component: 150 - total flux cleaned = 0.000215555 Jy ! Component: 200 - total flux cleaned = 0.000235203 Jy ! Total flux subtracted in 200 components = 0.000235203 Jy ! Clean residual min=-0.001898 max=0.001717 Jy/beam ! Clean residual mean=0.000006 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0429512 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.89991e-06 Jy ! Component: 100 - total flux cleaned = 1.719e-05 Jy ! Component: 150 - total flux cleaned = 1.70001e-05 Jy ! Component: 200 - total flux cleaned = 2.44945e-05 Jy ! Total flux subtracted in 200 components = 2.44945e-05 Jy ! Clean residual min=-0.001901 max=0.001720 Jy/beam ! Clean residual mean=0.000006 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0429757 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.0429757 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.322 mas, bmaj=10.58 mas, bpa=-7.735 degrees ! Estimated noise=666.634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.20902e-05 Jy ! Component: 100 - total flux cleaned = 4.46743e-05 Jy ! Component: 150 - total flux cleaned = 5.61896e-05 Jy ! Component: 200 - total flux cleaned = 8.7758e-05 Jy ! Total flux subtracted in 200 components = 8.7758e-05 Jy ! Clean residual min=-0.001701 max=0.001768 Jy/beam ! Clean residual mean=0.000004 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0430635 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.0430635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069510Jy sigma=0.000660 ! Fit after self-cal, rms=0.069512Jy sigma=0.000660 wmodel J2328+2937_S_2017_10_21_pus_map.mod ! Writing 63 model components to file: J2328+2937_S_2017_10_21_pus_map.mod wobs J2328+2937_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2328+2937_S_2017_10_21_pus_uvs.fits wwins J2328+2937_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2328+2937_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254493 Jy ! Component: 100 - total flux cleaned = 0.000310203 Jy ! Component: 150 - total flux cleaned = 0.000259558 Jy ! Component: 200 - total flux cleaned = 0.000308756 Jy ! Component: 250 - total flux cleaned = 0.000356087 Jy ! Component: 300 - total flux cleaned = 0.000447199 Jy ! Component: 350 - total flux cleaned = 0.000447374 Jy ! Component: 400 - total flux cleaned = 0.000405104 Jy ! Component: 450 - total flux cleaned = 0.000445657 Jy ! Component: 500 - total flux cleaned = 0.000445675 Jy ! Component: 550 - total flux cleaned = 0.000484574 Jy ! Component: 600 - total flux cleaned = 0.000503343 Jy ! Component: 650 - total flux cleaned = 0.000485312 Jy ! Component: 700 - total flux cleaned = 0.000538727 Jy ! Component: 750 - total flux cleaned = 0.000537993 Jy ! Component: 800 - total flux cleaned = 0.000571631 Jy ! Component: 850 - total flux cleaned = 0.000538582 Jy ! Component: 900 - total flux cleaned = 0.000522218 Jy ! Component: 950 - total flux cleaned = 0.000506551 Jy ! Component: 1000 - total flux cleaned = 0.000584182 Jy ! Component: 1050 - total flux cleaned = 0.00063001 Jy ! Component: 1100 - total flux cleaned = 0.000749867 Jy ! Component: 1150 - total flux cleaned = 0.000779085 Jy ! Component: 1200 - total flux cleaned = 0.000866351 Jy ! Component: 1250 - total flux cleaned = 0.000909276 Jy ! Component: 1300 - total flux cleaned = 0.000951688 Jy ! Component: 1350 - total flux cleaned = 0.000979971 Jy ! Component: 1400 - total flux cleaned = 0.00108962 Jy ! Component: 1450 - total flux cleaned = 0.00114338 Jy ! Component: 1500 - total flux cleaned = 0.00120969 Jy ! Component: 1550 - total flux cleaned = 0.00126186 Jy ! Component: 1600 - total flux cleaned = 0.00133915 Jy ! Component: 1650 - total flux cleaned = 0.00139006 Jy ! Component: 1700 - total flux cleaned = 0.0014654 Jy ! Component: 1750 - total flux cleaned = 0.00153963 Jy ! Component: 1800 - total flux cleaned = 0.00162513 Jy ! Component: 1850 - total flux cleaned = 0.00167332 Jy ! Component: 1900 - total flux cleaned = 0.00174474 Jy ! Component: 1950 - total flux cleaned = 0.00176834 Jy ! Component: 2000 - total flux cleaned = 0.00187288 Jy ! Component: 2050 - total flux cleaned = 0.00195311 Jy ! Component: 2100 - total flux cleaned = 0.00202103 Jy ! Component: 2150 - total flux cleaned = 0.00208815 Jy ! Component: 2200 - total flux cleaned = 0.00217658 Jy ! Component: 2250 - total flux cleaned = 0.00220956 Jy ! Component: 2300 - total flux cleaned = 0.00229613 Jy ! Component: 2350 - total flux cleaned = 0.00237114 Jy ! Component: 2400 - total flux cleaned = 0.00242408 Jy ! Component: 2450 - total flux cleaned = 0.00247655 Jy ! Component: 2500 - total flux cleaned = 0.00254932 Jy ! Component: 2550 - total flux cleaned = 0.00259053 Jy ! Component: 2600 - total flux cleaned = 0.00263151 Jy ! Component: 2650 - total flux cleaned = 0.00274293 Jy ! Component: 2700 - total flux cleaned = 0.00281322 Jy ! Component: 2750 - total flux cleaned = 0.0028828 Jy ! Component: 2800 - total flux cleaned = 0.00295184 Jy ! Component: 2850 - total flux cleaned = 0.00302025 Jy ! Component: 2900 - total flux cleaned = 0.003059 Jy ! Component: 2950 - total flux cleaned = 0.00309741 Jy ! Component: 3000 - total flux cleaned = 0.00317376 Jy ! Component: 3050 - total flux cleaned = 0.00323061 Jy ! Component: 3100 - total flux cleaned = 0.00326817 Jy ! Component: 3150 - total flux cleaned = 0.00329613 Jy ! Component: 3200 - total flux cleaned = 0.00332402 Jy ! Component: 3250 - total flux cleaned = 0.00336089 Jy ! Component: 3300 - total flux cleaned = 0.00339758 Jy ! Component: 3350 - total flux cleaned = 0.00340663 Jy ! Component: 3400 - total flux cleaned = 0.00343388 Jy ! Component: 3450 - total flux cleaned = 0.00346092 Jy ! Component: 3500 - total flux cleaned = 0.00348782 Jy ! Component: 3550 - total flux cleaned = 0.00351452 Jy ! Component: 3600 - total flux cleaned = 0.00354101 Jy ! Component: 3650 - total flux cleaned = 0.00354099 Jy ! Component: 3700 - total flux cleaned = 0.00355859 Jy ! Component: 3750 - total flux cleaned = 0.00361084 Jy ! Component: 3800 - total flux cleaned = 0.00360212 Jy ! Component: 3850 - total flux cleaned = 0.00362797 Jy ! Component: 3900 - total flux cleaned = 0.00362794 Jy ! Component: 3950 - total flux cleaned = 0.00362795 Jy ! Component: 4000 - total flux cleaned = 0.0036024 Jy ! Component: 4050 - total flux cleaned = 0.00357702 Jy ! Total flux subtracted in 4096 components = 0.00358548 Jy ! Clean residual min=-0.000609 max=0.000440 Jy/beam ! Clean residual mean=-0.000000 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.046649 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 320 components and 0.046649 Jy ![Exited script file: muppet] wmap "J2328+2937_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.322 x 10.58 at -7.735 degrees (North through East) ! Clean map min=-0.00096816 max=0.04112 Jy/beam ! Writing clean map to FITS file: J2328+2937_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0411198 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146868 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07151 1.07151 2.14303 4.28605 8.5721 17.1442 34.2884 68.5768 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.041 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.322 x 10.58 at -7.735 degrees (North through East) ! Clean map min=-0.00096816 max=0.04112 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2328+2937_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:08:18 2019