! Started logfile: J2328+2937_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:52:01 2019 obs J2328+2937_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J2328+2937_S_2017_03_27_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.917227 visibilities/baseline/integration-bin. ! Found source: J2328+2937 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 35992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2328+2937_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 953 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992572Jy sigma=0.009149 ! Fit after self-cal, rms=0.962721Jy sigma=0.008894 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.789 mas, bmaj=5.641 mas, bpa=-5.006 degrees ! Estimated noise=922.832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306453 Jy ! Component: 100 - total flux cleaned = 0.0374117 Jy ! Total flux subtracted in 100 components = 0.0374117 Jy ! Clean residual min=-0.002899 max=0.003256 Jy/beam ! Clean residual mean=-0.000002 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0374117 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0374117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075639Jy sigma=0.000647 ! Fit after self-cal, rms=0.074637Jy sigma=0.000638 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=6.567 mas, bpa=-6.304 degrees ! Estimated noise=450.033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320868 Jy ! Component: 100 - total flux cleaned = 0.0039464 Jy ! Component: 150 - total flux cleaned = 0.00407733 Jy ! Component: 200 - total flux cleaned = 0.00415943 Jy ! Total flux subtracted in 200 components = 0.00415943 Jy ! Clean residual min=-0.001436 max=0.001541 Jy/beam ! Clean residual mean=-0.000001 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0415711 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.0415711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074469Jy sigma=0.000637 ! Fit after self-cal, rms=0.074457Jy sigma=0.000637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.04 KP 0.97 ! LA 1.00 MK 1.02 NL 1.00 OV 1.07 ! PT 1.04 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 0.97 KP 0.96 ! LA 0.98 MK 1.06 NL 1.03 OV 1.08 ! PT 1.09 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 1.06 KP 0.99 ! LA 0.98 MK 1.02 NL 1.01 OV 1.03 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.95 HN 0.89 KP 1.00* ! LA 0.72 MK 0.81 NL 1.00* OV 0.69 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.074457Jy sigma=0.000637 ! Fit after self-cal, rms=0.072713Jy sigma=0.000636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=6.527 mas, bpa=-6.219 degrees ! Estimated noise=449.751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000518501 Jy ! Component: 100 - total flux cleaned = 0.000661126 Jy ! Component: 150 - total flux cleaned = 0.000699475 Jy ! Component: 200 - total flux cleaned = 0.00073364 Jy ! Total flux subtracted in 200 components = 0.00073364 Jy ! Clean residual min=-0.001191 max=0.001219 Jy/beam ! Clean residual mean=-0.000002 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.0423048 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.0423048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072703Jy sigma=0.000635 ! Fit after self-cal, rms=0.072619Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072619Jy sigma=0.000635 ! Fit after self-cal, rms=0.071359Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=6.511 mas, bpa=-6.464 degrees ! Estimated noise=449.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200908 Jy ! Component: 100 - total flux cleaned = 0.000328973 Jy ! Component: 150 - total flux cleaned = 0.000380459 Jy ! Component: 200 - total flux cleaned = 0.000415175 Jy ! Total flux subtracted in 200 components = 0.000415175 Jy ! Clean residual min=-0.001072 max=0.001004 Jy/beam ! Clean residual mean=-0.000002 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.0427199 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.0427199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071355Jy sigma=0.000634 ! Fit after self-cal, rms=0.071334Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.69022e-05 Jy ! Component: 100 - total flux cleaned = 9.41442e-05 Jy ! Component: 150 - total flux cleaned = 0.000125843 Jy ! Component: 200 - total flux cleaned = 0.000133022 Jy ! Total flux subtracted in 200 components = 0.000133022 Jy ! Clean residual min=-0.001068 max=0.001101 Jy/beam ! Clean residual mean=-0.000002 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0428529 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0428529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071331Jy sigma=0.000634 ! Fit after self-cal, rms=0.071327Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071327Jy sigma=0.000634 ! Fit after self-cal, rms=0.071360Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=6.511 mas, bpa=-6.485 degrees ! Estimated noise=449.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267382 Jy ! Component: 100 - total flux cleaned = 0.000372971 Jy ! Component: 150 - total flux cleaned = 0.000406791 Jy ! Component: 200 - total flux cleaned = 0.000414263 Jy ! Total flux subtracted in 200 components = 0.000414263 Jy ! Clean residual min=-0.000993 max=0.001119 Jy/beam ! Clean residual mean=-0.000002 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.0432672 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.0432672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071356Jy sigma=0.000634 ! Fit after self-cal, rms=0.071359Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-67.5, 79). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000459491 Jy ! Component: 100 - total flux cleaned = 0.000490399 Jy ! Component: 150 - total flux cleaned = 0.000490731 Jy ! Component: 200 - total flux cleaned = 0.000455938 Jy ! Total flux subtracted in 200 components = 0.000455938 Jy ! Clean residual min=-0.000960 max=0.000915 Jy/beam ! Clean residual mean=-0.000002 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.0437231 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.0437231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071340Jy sigma=0.000634 ! Fit after self-cal, rms=0.071324Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071324Jy sigma=0.000633 ! Fit after self-cal, rms=0.071390Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.736 mas, bmaj=9.578 mas, bpa=-4.161 degrees ! Estimated noise=557.151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301786 Jy ! Component: 100 - total flux cleaned = 0.000411894 Jy ! Component: 150 - total flux cleaned = 0.000434021 Jy ! Component: 200 - total flux cleaned = 0.000453086 Jy ! Total flux subtracted in 200 components = 0.000453086 Jy ! Clean residual min=-0.001187 max=0.001105 Jy/beam ! Clean residual mean=-0.000003 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.0441762 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.0441762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071384Jy sigma=0.000633 ! Fit after self-cal, rms=0.071375Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142986 Jy ! Component: 100 - total flux cleaned = 0.000131055 Jy ! Component: 150 - total flux cleaned = 0.000140643 Jy ! Component: 200 - total flux cleaned = 0.000123483 Jy ! Total flux subtracted in 200 components = 0.000123483 Jy ! Clean residual min=-0.001159 max=0.001085 Jy/beam ! Clean residual mean=-0.000004 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.0442997 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 70 components and 0.0442997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071372Jy sigma=0.000633 ! Fit after self-cal, rms=0.071370Jy sigma=0.000633 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.467 mas, bmaj=6.506 mas, bpa=-6.587 degrees ! Estimated noise=449.606 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.467 x 6.506 at -6.587 degrees (North through East) ! Clean map min=-0.0011092 max=0.041188 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=5.624 mas, bpa=-5.429 degrees ! Estimated noise=904.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320813 Jy ! Component: 100 - total flux cleaned = 0.0391144 Jy ! Component: 150 - total flux cleaned = 0.0404999 Jy ! Component: 200 - total flux cleaned = 0.0404886 Jy ! Total flux subtracted in 200 components = 0.0404886 Jy ! Clean residual min=-0.002292 max=0.002422 Jy/beam ! Clean residual mean=-0.000001 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0404886 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0404886 Jy ! Inverting map and beam ! Estimated beam: bmin=3.467 mas, bmaj=6.506 mas, bpa=-6.587 degrees ! Estimated noise=449.606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177314 Jy ! Component: 100 - total flux cleaned = 0.00259076 Jy ! Component: 150 - total flux cleaned = 0.00305028 Jy ! Component: 200 - total flux cleaned = 0.00330119 Jy ! Total flux subtracted in 200 components = 0.00330119 Jy ! Clean residual min=-0.001061 max=0.000929 Jy/beam ! Clean residual mean=-0.000002 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.0437898 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 0.0437898 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.736 mas, bmaj=9.578 mas, bpa=-4.161 degrees ! Estimated noise=557.151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000323252 Jy ! Component: 100 - total flux cleaned = 0.000425162 Jy ! Component: 150 - total flux cleaned = 0.000504978 Jy ! Component: 200 - total flux cleaned = 0.00052256 Jy ! Total flux subtracted in 200 components = 0.00052256 Jy ! Clean residual min=-0.001195 max=0.001078 Jy/beam ! Clean residual mean=-0.000004 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0443124 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.95606e-05 Jy ! Component: 100 - total flux cleaned = 5.44391e-05 Jy ! Component: 150 - total flux cleaned = 9.8789e-05 Jy ! Component: 200 - total flux cleaned = 0.000119381 Jy ! Total flux subtracted in 200 components = 0.000119381 Jy ! Clean residual min=-0.001163 max=0.001046 Jy/beam ! Clean residual mean=-0.000004 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.0444317 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 86 components and 0.0444317 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.467 mas, bmaj=6.506 mas, bpa=-6.587 degrees ! Estimated noise=449.606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.64012e-05 Jy ! Component: 100 - total flux cleaned = 1.35573e-05 Jy ! Component: 150 - total flux cleaned = 6.69067e-05 Jy ! Component: 200 - total flux cleaned = 6.66667e-05 Jy ! Total flux subtracted in 200 components = 6.66667e-05 Jy ! Clean residual min=-0.000993 max=0.000866 Jy/beam ! Clean residual mean=-0.000002 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.0444984 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.0444984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071361Jy sigma=0.000633 ! Fit after self-cal, rms=0.071355Jy sigma=0.000633 wmodel J2328+2937_S_2017_03_27_pus_map.mod ! Writing 98 model components to file: J2328+2937_S_2017_03_27_pus_map.mod wobs J2328+2937_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J2328+2937_S_2017_03_27_pus_uvs.fits wwins J2328+2937_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J2328+2937_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000424284 Jy ! Component: 100 - total flux cleaned = -0.000663473 Jy ! Component: 150 - total flux cleaned = -0.000859273 Jy ! Component: 200 - total flux cleaned = -0.00104861 Jy ! Component: 250 - total flux cleaned = -0.00117105 Jy ! Component: 300 - total flux cleaned = -0.00130521 Jy ! Component: 350 - total flux cleaned = -0.00145059 Jy ! Component: 400 - total flux cleaned = -0.00157847 Jy ! Component: 450 - total flux cleaned = -0.00167597 Jy ! Component: 500 - total flux cleaned = -0.00175817 Jy ! Component: 550 - total flux cleaned = -0.0018659 Jy ! Component: 600 - total flux cleaned = -0.00191894 Jy ! Component: 650 - total flux cleaned = -0.00203611 Jy ! Component: 700 - total flux cleaned = -0.00210037 Jy ! Component: 750 - total flux cleaned = -0.00220167 Jy ! Component: 800 - total flux cleaned = -0.0022889 Jy ! Component: 850 - total flux cleaned = -0.00236256 Jy ! Component: 900 - total flux cleaned = -0.00244728 Jy ! Component: 950 - total flux cleaned = -0.00250721 Jy ! Component: 1000 - total flux cleaned = -0.00263719 Jy ! Component: 1050 - total flux cleaned = -0.00273052 Jy ! Component: 1100 - total flux cleaned = -0.00279977 Jy ! Component: 1150 - total flux cleaned = -0.00289107 Jy ! Component: 1200 - total flux cleaned = -0.00299254 Jy ! Component: 1250 - total flux cleaned = -0.00305967 Jy ! Component: 1300 - total flux cleaned = -0.00315899 Jy ! Component: 1350 - total flux cleaned = -0.00322441 Jy ! Component: 1400 - total flux cleaned = -0.00331065 Jy ! Component: 1450 - total flux cleaned = -0.00334259 Jy ! Component: 1500 - total flux cleaned = -0.00338494 Jy ! Component: 1550 - total flux cleaned = -0.00344774 Jy ! Component: 1600 - total flux cleaned = -0.0035098 Jy ! Component: 1650 - total flux cleaned = -0.00356117 Jy ! Component: 1700 - total flux cleaned = -0.00361183 Jy ! Component: 1750 - total flux cleaned = -0.00367204 Jy ! Component: 1800 - total flux cleaned = -0.00369206 Jy ! Component: 1850 - total flux cleaned = -0.00375129 Jy ! Component: 1900 - total flux cleaned = -0.00380013 Jy ! Component: 1950 - total flux cleaned = -0.00382906 Jy ! Component: 2000 - total flux cleaned = -0.00385788 Jy ! Component: 2050 - total flux cleaned = -0.00389608 Jy ! Component: 2100 - total flux cleaned = -0.00395244 Jy ! Component: 2150 - total flux cleaned = -0.00400837 Jy ! Component: 2200 - total flux cleaned = -0.0040731 Jy ! Component: 2250 - total flux cleaned = -0.00408206 Jy ! Component: 2300 - total flux cleaned = -0.00411848 Jy ! Component: 2350 - total flux cleaned = -0.00415453 Jy ! Component: 2400 - total flux cleaned = -0.00418135 Jy ! Component: 2450 - total flux cleaned = -0.00422571 Jy ! Component: 2500 - total flux cleaned = -0.00427857 Jy ! Component: 2550 - total flux cleaned = -0.0043222 Jy ! Component: 2600 - total flux cleaned = -0.00434818 Jy ! Component: 2650 - total flux cleaned = -0.0043999 Jy ! Component: 2700 - total flux cleaned = -0.00442556 Jy ! Component: 2750 - total flux cleaned = -0.00446784 Jy ! Component: 2800 - total flux cleaned = -0.00450152 Jy ! Component: 2850 - total flux cleaned = -0.00453496 Jy ! Component: 2900 - total flux cleaned = -0.00456824 Jy ! Component: 2950 - total flux cleaned = -0.00463409 Jy ! Component: 3000 - total flux cleaned = -0.00466678 Jy ! Component: 3050 - total flux cleaned = -0.00470743 Jy ! Component: 3100 - total flux cleaned = -0.00474773 Jy ! Component: 3150 - total flux cleaned = -0.00477181 Jy ! Component: 3200 - total flux cleaned = -0.00481163 Jy ! Component: 3250 - total flux cleaned = -0.00484327 Jy ! Component: 3300 - total flux cleaned = -0.00486691 Jy ! Component: 3350 - total flux cleaned = -0.00491379 Jy ! Component: 3400 - total flux cleaned = -0.00495251 Jy ! Component: 3450 - total flux cleaned = -0.00496799 Jy ! Component: 3500 - total flux cleaned = -0.00499098 Jy ! Component: 3550 - total flux cleaned = -0.00503667 Jy ! Component: 3600 - total flux cleaned = -0.00502908 Jy ! Component: 3650 - total flux cleaned = -0.00505164 Jy ! Component: 3700 - total flux cleaned = -0.00508158 Jy ! Component: 3750 - total flux cleaned = -0.00511877 Jy ! Component: 3800 - total flux cleaned = -0.00514833 Jy ! Component: 3850 - total flux cleaned = -0.00517767 Jy ! Component: 3900 - total flux cleaned = -0.0051557 Jy ! Component: 3950 - total flux cleaned = -0.00518476 Jy ! Component: 4000 - total flux cleaned = -0.00520643 Jy ! Component: 4050 - total flux cleaned = -0.00522079 Jy ! Total flux subtracted in 4096 components = -0.00527799 Jy ! Clean residual min=-0.000419 max=0.000421 Jy/beam ! Clean residual mean=-0.000001 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.0392204 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 404 components and 0.0392204 Jy ![Exited script file: muppet] wmap "J2328+2937_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.467 x 6.506 at -6.587 degrees (North through East) ! Clean map min=-0.0011161 max=0.041036 Jy/beam ! Writing clean map to FITS file: J2328+2937_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0410364 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000131728 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.963011 0.963011 1.92602 3.85204 7.70409 15.4082 30.8164 61.6327 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.041 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.467 x 6.506 at -6.587 degrees (North through East) ! Clean map min=-0.0011161 max=0.041036 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2328+2937_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:52:08 2019