! Started logfile: J2325-4051_S_2017_04_28_pus_uvs.log on Thu May 2 16:35:23 2019 obs J2325-4051_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J2325-4051_S_2017_04_28_pus_uva.fits ! AN table 1: 594 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.509877 visibilities/baseline/integration-bin. ! Found source: J2325-4051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 54516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2325-4051_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1966 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1887 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1906 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4069 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911595Jy sigma=0.026239 ! Fit after self-cal, rms=0.857089Jy sigma=0.025788 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.124 mas, bmaj=9.267 mas, bpa=-14.19 degrees ! Estimated noise=898.488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0475133 Jy ! Component: 100 - total flux cleaned = 0.0759788 Jy ! Total flux subtracted in 100 components = 0.0759788 Jy ! Clean residual min=-0.016274 max=0.019778 Jy/beam ! Clean residual mean=0.000394 rms=0.004964 Jy/beam ! Combined flux in latest and established models = 0.0759788 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0759788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313417Jy sigma=0.002012 ! Fit after self-cal, rms=0.313107Jy sigma=0.002011 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=11.36 mas, bpa=-11.69 degrees ! Estimated noise=449.374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.057729 Jy ! Component: 100 - total flux cleaned = 0.0808064 Jy ! Component: 150 - total flux cleaned = 0.0906064 Jy ! Component: 200 - total flux cleaned = 0.0948709 Jy ! Total flux subtracted in 200 components = 0.0948709 Jy ! Clean residual min=-0.033920 max=0.045470 Jy/beam ! Clean residual mean=0.002698 rms=0.015712 Jy/beam ! Combined flux in latest and established models = 0.17085 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 58 components and 0.17085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281933Jy sigma=0.003872 ! Fit after self-cal, rms=0.281702Jy sigma=0.003872 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.69 HN 1.15 KP 0.77 ! LA 0.62 MK 0.90 NL 2.13 OV 1.20 ! PT 0.58 SC 1.59 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.63 HN 1.24 KP 0.77 ! LA 0.60 MK 1.03 NL 2.38 OV 1.26 ! PT 0.58 SC 1.58 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.67 HN 1.08 KP 0.81 ! LA 0.61 MK 0.99 NL 2.23 OV 1.12 ! PT 0.58 SC 1.52 ! ! ! Correcting IF 4. ! A total of 738 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.67 HN 0.95 KP 1.00* ! LA 31.20 MK 0.81 NL 1.00* OV 1.00* ! PT 0.65 SC 1.00* ! ! ! Fit before self-cal, rms=0.281702Jy sigma=0.003872 ! Fit after self-cal, rms=2.516634Jy sigma=0.000751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.719 mas, bmaj=11.59 mas, bpa=-12.74 degrees ! Estimated noise=488.417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229121 Jy ! Component: 100 - total flux cleaned = 0.00245811 Jy ! Component: 150 - total flux cleaned = 0.00245879 Jy ! Component: 200 - total flux cleaned = 0.00253294 Jy ! Total flux subtracted in 200 components = 0.00253294 Jy ! Clean residual min=-0.008562 max=0.015401 Jy/beam ! Clean residual mean=-0.000082 rms=0.003918 Jy/beam ! Combined flux in latest and established models = 0.173383 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.173383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.516504Jy sigma=0.000750 ! Fit after self-cal, rms=2.517312Jy sigma=0.000742 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.517312Jy sigma=0.000742 ! Fit after self-cal, rms=3.101021Jy sigma=0.000729 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.59 mas, bmaj=11.91 mas, bpa=-12.52 degrees ! Estimated noise=482.637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274016 Jy ! Component: 100 - total flux cleaned = 0.00315157 Jy ! Component: 150 - total flux cleaned = 0.00314989 Jy ! Component: 200 - total flux cleaned = 0.00311345 Jy ! Total flux subtracted in 200 components = 0.00311345 Jy ! Clean residual min=-0.008051 max=0.013816 Jy/beam ! Clean residual mean=0.000148 rms=0.003498 Jy/beam ! Combined flux in latest and established models = 0.176496 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 78 components and 0.176496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.100873Jy sigma=0.000730 ! Fit after self-cal, rms=3.100890Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.63193e-06 Jy ! Component: 100 - total flux cleaned = 5.7405e-06 Jy ! Component: 150 - total flux cleaned = -3.10673e-05 Jy ! Component: 200 - total flux cleaned = -2.98102e-05 Jy ! Total flux subtracted in 200 components = -2.98102e-05 Jy ! Clean residual min=-0.007866 max=0.013764 Jy/beam ! Clean residual mean=0.000147 rms=0.003490 Jy/beam ! Combined flux in latest and established models = 0.176466 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 0.176466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.100889Jy sigma=0.000729 ! Fit after self-cal, rms=3.100888Jy sigma=0.000729 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.100888Jy sigma=0.000729 ! Fit after self-cal, rms=3.121848Jy sigma=0.000729 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.501 mas, bmaj=11.98 mas, bpa=-12.48 degrees ! Estimated noise=477.968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258122 Jy ! Component: 100 - total flux cleaned = 0.00307953 Jy ! Component: 150 - total flux cleaned = 0.0030466 Jy ! Component: 200 - total flux cleaned = 0.00304456 Jy ! Total flux subtracted in 200 components = 0.00304456 Jy ! Clean residual min=-0.007776 max=0.013612 Jy/beam ! Clean residual mean=0.000147 rms=0.003453 Jy/beam ! Combined flux in latest and established models = 0.179511 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 81 components and 0.179511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.121701Jy sigma=0.000729 ! Fit after self-cal, rms=3.121692Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.81002e-05 Jy ! Component: 100 - total flux cleaned = 4.37216e-05 Jy ! Component: 150 - total flux cleaned = 4.18112e-05 Jy ! Component: 200 - total flux cleaned = 4.38235e-05 Jy ! Total flux subtracted in 200 components = 4.38235e-05 Jy ! Clean residual min=-0.007769 max=0.013586 Jy/beam ! Clean residual mean=0.000148 rms=0.003452 Jy/beam ! Combined flux in latest and established models = 0.179555 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 81 components and 0.179555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.121689Jy sigma=0.000729 ! Fit after self-cal, rms=3.121685Jy sigma=0.000729 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.121685Jy sigma=0.000729 ! Fit after self-cal, rms=3.148874Jy sigma=0.000728 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.95 mas, bmaj=37.62 mas, bpa=-3.078 degrees ! Estimated noise=520.183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00448654 Jy ! Component: 100 - total flux cleaned = 0.00494329 Jy ! Component: 150 - total flux cleaned = 0.00500676 Jy ! Component: 200 - total flux cleaned = 0.00506966 Jy ! Total flux subtracted in 200 components = 0.00506966 Jy ! Clean residual min=-0.011493 max=0.020107 Jy/beam ! Clean residual mean=0.000260 rms=0.005312 Jy/beam ! Combined flux in latest and established models = 0.184624 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 83 components and 0.184624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.148635Jy sigma=0.000730 ! Fit after self-cal, rms=3.148641Jy sigma=0.000730 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.71978e-06 Jy ! Component: 100 - total flux cleaned = 4.56541e-05 Jy ! Component: 150 - total flux cleaned = 9.99572e-05 Jy ! Component: 200 - total flux cleaned = 0.00015186 Jy ! Total flux subtracted in 200 components = 0.00015186 Jy ! Clean residual min=-0.011480 max=0.020129 Jy/beam ! Clean residual mean=0.000262 rms=0.005298 Jy/beam ! Combined flux in latest and established models = 0.184776 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 84 components and 0.184776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.148637Jy sigma=0.000731 ! Fit after self-cal, rms=3.148643Jy sigma=0.000731 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=12.09 mas, bpa=-12.42 degrees ! Estimated noise=472.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.413 x 12.09 at -12.42 degrees (North through East) ! Clean map min=-0.0078233 max=0.090471 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=9.781 mas, bpa=-13.3 degrees ! Estimated noise=1180.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580065 Jy ! Component: 100 - total flux cleaned = 0.0906624 Jy ! Component: 150 - total flux cleaned = 0.113256 Jy ! Component: 200 - total flux cleaned = 0.129193 Jy ! Total flux subtracted in 200 components = 0.129193 Jy ! Clean residual min=-0.006522 max=0.010735 Jy/beam ! Clean residual mean=0.000032 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.129193 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.129193 Jy ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=12.09 mas, bpa=-12.42 degrees ! Estimated noise=472.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306648 Jy ! Component: 100 - total flux cleaned = 0.0435954 Jy ! Component: 150 - total flux cleaned = 0.0492992 Jy ! Component: 200 - total flux cleaned = 0.0518637 Jy ! Total flux subtracted in 200 components = 0.0518637 Jy ! Clean residual min=-0.007667 max=0.013427 Jy/beam ! Clean residual mean=0.000136 rms=0.003421 Jy/beam ! Combined flux in latest and established models = 0.181057 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 63 components and 0.181057 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.95 mas, bmaj=37.62 mas, bpa=-3.078 degrees ! Estimated noise=520.183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301027 Jy ! Component: 100 - total flux cleaned = 0.00308426 Jy ! Component: 150 - total flux cleaned = 0.00321591 Jy ! Component: 200 - total flux cleaned = 0.00327525 Jy ! Total flux subtracted in 200 components = 0.00327525 Jy ! Clean residual min=-0.011472 max=0.020226 Jy/beam ! Clean residual mean=0.000256 rms=0.005324 Jy/beam ! Combined flux in latest and established models = 0.184332 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.85582e-05 Jy ! Component: 100 - total flux cleaned = 0.00011731 Jy ! Component: 150 - total flux cleaned = 0.000174641 Jy ! Component: 200 - total flux cleaned = 0.000175933 Jy ! Total flux subtracted in 200 components = 0.000175933 Jy ! Clean residual min=-0.011473 max=0.020178 Jy/beam ! Clean residual mean=0.000259 rms=0.005310 Jy/beam ! Combined flux in latest and established models = 0.184508 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 0.184508 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=12.09 mas, bpa=-12.42 degrees ! Estimated noise=472.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178993 Jy ! Component: 100 - total flux cleaned = -0.00178594 Jy ! Component: 150 - total flux cleaned = -0.00173334 Jy ! Component: 200 - total flux cleaned = -0.00169348 Jy ! Total flux subtracted in 200 components = -0.00169348 Jy ! Clean residual min=-0.007644 max=0.013500 Jy/beam ! Clean residual mean=0.000146 rms=0.003400 Jy/beam ! Combined flux in latest and established models = 0.182815 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.182815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.148731Jy sigma=0.000729 ! Fit after self-cal, rms=3.148722Jy sigma=0.000729 wmodel J2325-4051_S_2017_04_28_pus_map.mod ! Writing 76 model components to file: J2325-4051_S_2017_04_28_pus_map.mod wobs J2325-4051_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J2325-4051_S_2017_04_28_pus_uvs.fits wwins J2325-4051_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J2325-4051_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569592 Jy ! Component: 100 - total flux cleaned = 0.0104092 Jy ! Component: 150 - total flux cleaned = 0.0146051 Jy ! Component: 200 - total flux cleaned = 0.0184342 Jy ! Component: 250 - total flux cleaned = 0.0209746 Jy ! Component: 300 - total flux cleaned = 0.0230726 Jy ! Component: 350 - total flux cleaned = 0.0251483 Jy ! Component: 400 - total flux cleaned = 0.0265238 Jy ! Component: 450 - total flux cleaned = 0.0280445 Jy ! Component: 500 - total flux cleaned = 0.0292896 Jy ! Component: 550 - total flux cleaned = 0.0304857 Jy ! Component: 600 - total flux cleaned = 0.0315409 Jy ! Component: 650 - total flux cleaned = 0.0322826 Jy ! Component: 700 - total flux cleaned = 0.0331787 Jy ! Component: 750 - total flux cleaned = 0.0343094 Jy ! Component: 800 - total flux cleaned = 0.0351539 Jy ! Component: 850 - total flux cleaned = 0.0356466 Jy ! Component: 900 - total flux cleaned = 0.0363674 Jy ! Component: 950 - total flux cleaned = 0.0370698 Jy ! Component: 1000 - total flux cleaned = 0.0373768 Jy ! Component: 1050 - total flux cleaned = 0.0379032 Jy ! Component: 1100 - total flux cleaned = 0.0383457 Jy ! Component: 1150 - total flux cleaned = 0.0387084 Jy ! Component: 1200 - total flux cleaned = 0.0389946 Jy ! Component: 1250 - total flux cleaned = 0.0394879 Jy ! Component: 1300 - total flux cleaned = 0.0398349 Jy ! Component: 1350 - total flux cleaned = 0.0401758 Jy ! Component: 1400 - total flux cleaned = 0.0404468 Jy ! Component: 1450 - total flux cleaned = 0.0408465 Jy ! Component: 1500 - total flux cleaned = 0.0413055 Jy ! Component: 1550 - total flux cleaned = 0.0415 Jy ! Component: 1600 - total flux cleaned = 0.041756 Jy ! Component: 1650 - total flux cleaned = 0.0420722 Jy ! Component: 1700 - total flux cleaned = 0.0423843 Jy ! Component: 1750 - total flux cleaned = 0.0426929 Jy ! Component: 1800 - total flux cleaned = 0.0429989 Jy ! Component: 1850 - total flux cleaned = 0.0436028 Jy ! Component: 1900 - total flux cleaned = 0.0439603 Jy ! Component: 1950 - total flux cleaned = 0.0442559 Jy ! Component: 2000 - total flux cleaned = 0.0446651 Jy ! Component: 2050 - total flux cleaned = 0.0450125 Jy ! Component: 2100 - total flux cleaned = 0.0453571 Jy ! Component: 2150 - total flux cleaned = 0.0457566 Jy ! Component: 2200 - total flux cleaned = 0.0463225 Jy ! Component: 2250 - total flux cleaned = 0.0466594 Jy ! Component: 2300 - total flux cleaned = 0.0471059 Jy ! Component: 2350 - total flux cleaned = 0.0474939 Jy ! Component: 2400 - total flux cleaned = 0.0478795 Jy ! Component: 2450 - total flux cleaned = 0.0482083 Jy ! Component: 2500 - total flux cleaned = 0.0485902 Jy ! Component: 2550 - total flux cleaned = 0.0489704 Jy ! Component: 2600 - total flux cleaned = 0.0493486 Jy ! Component: 2650 - total flux cleaned = 0.0496711 Jy ! Component: 2700 - total flux cleaned = 0.050099 Jy ! Component: 2750 - total flux cleaned = 0.0504714 Jy ! Component: 2800 - total flux cleaned = 0.0508951 Jy ! Component: 2850 - total flux cleaned = 0.0512646 Jy ! Component: 2900 - total flux cleaned = 0.051738 Jy ! Component: 2950 - total flux cleaned = 0.0521052 Jy ! Component: 3000 - total flux cleaned = 0.0525238 Jy ! Component: 3050 - total flux cleaned = 0.0529942 Jy ! Component: 3100 - total flux cleaned = 0.0533589 Jy ! Component: 3150 - total flux cleaned = 0.0537751 Jy ! Component: 3200 - total flux cleaned = 0.0541907 Jy ! Component: 3250 - total flux cleaned = 0.0546057 Jy ! Component: 3300 - total flux cleaned = 0.0550724 Jy ! Component: 3350 - total flux cleaned = 0.0554349 Jy ! Component: 3400 - total flux cleaned = 0.0559007 Jy ! Component: 3450 - total flux cleaned = 0.0563145 Jy ! Component: 3500 - total flux cleaned = 0.056728 Jy ! Component: 3550 - total flux cleaned = 0.0571415 Jy ! Component: 3600 - total flux cleaned = 0.0574 Jy ! Component: 3650 - total flux cleaned = 0.0578136 Jy ! Component: 3700 - total flux cleaned = 0.0581756 Jy ! Component: 3750 - total flux cleaned = 0.0585895 Jy ! Component: 3800 - total flux cleaned = 0.0589 Jy ! Component: 3850 - total flux cleaned = 0.0593142 Jy ! Component: 3900 - total flux cleaned = 0.0597807 Jy ! Component: 3950 - total flux cleaned = 0.0601439 Jy ! Component: 4000 - total flux cleaned = 0.0605593 Jy ! Component: 4050 - total flux cleaned = 0.0609232 Jy ! Total flux subtracted in 4096 components = 0.0612877 Jy ! Clean residual min=-0.003113 max=0.003883 Jy/beam ! Clean residual mean=0.000184 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.244102 Jy keep ! Adding 581 model components to the UV plane model. ! The established model now contains 657 components and 0.244102 Jy ![Exited script file: muppet] wmap "J2325-4051_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.413 x 12.09 at -12.42 degrees (North through East) ! Clean map min=-0.0061877 max=0.093194 Jy/beam ! Writing clean map to FITS file: J2325-4051_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0931943 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00121342 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.90609 3.90609 7.81218 15.6244 31.2487 62.4974 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.413 x 12.09 at -12.42 degrees (North through East) ! Clean map min=-0.0061877 max=0.093194 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2325-4051_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:35:30 2019