! Started logfile: J2325-4051_S_2017_01_21_pus_uvs.log on Sun May 5 16:06:46 2019 obs J2325-4051_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2325-4051_S_2017_01_21_pus_uva.fits ! AN table 1: 102 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.160131 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2325-4051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 2352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2325-4051_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 733 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 744 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 580 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 748 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903323Jy sigma=0.004174 ! Fit after self-cal, rms=0.845259Jy sigma=0.003920 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.189 mas, bmaj=7.246 mas, bpa=-2.177 degrees ! Estimated noise=9507.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118989 Jy ! Component: 100 - total flux cleaned = 0.168951 Jy ! Total flux subtracted in 100 components = 0.168951 Jy ! Clean residual min=-0.036866 max=0.047988 Jy/beam ! Clean residual mean=-0.001614 rms=0.012331 Jy/beam ! Combined flux in latest and established models = 0.168951 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.168951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216023Jy sigma=0.000965 ! Fit after self-cal, rms=0.215285Jy sigma=0.000962 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.673 mas, bmaj=9.176 mas, bpa=-12.85 degrees ! Estimated noise=4352.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0728547 Jy ! Component: 100 - total flux cleaned = 0.108293 Jy ! Component: 150 - total flux cleaned = 0.126018 Jy ! Component: 200 - total flux cleaned = 0.134928 Jy ! Total flux subtracted in 200 components = 0.134928 Jy ! Clean residual min=-0.045810 max=0.069638 Jy/beam ! Clean residual mean=-0.005210 rms=0.024772 Jy/beam ! Combined flux in latest and established models = 0.30388 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 0.303879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205467Jy sigma=0.000774 ! Fit after self-cal, rms=0.204631Jy sigma=0.000771 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.80 ! MK 1.69 NL 1.00* OV 2.65 PT 0.84 ! SC 1.24 ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.78 ! MK 1.35 NL 1.16 OV 2.45 PT 0.82 ! SC 1.18 ! ! ! Correcting IF 3. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.88 ! MK 1.28 NL 2.48 OV 1.93 PT 0.76 ! SC 1.41 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.67 ! MK 1.10 NL 1.00* OV 2.13 PT 0.86 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.204631Jy sigma=0.000771 ! Fit after self-cal, rms=0.484311Jy sigma=0.000604 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=8.812 mas, bpa=-12.72 degrees ! Estimated noise=6004.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109556 Jy ! Component: 100 - total flux cleaned = -0.00226835 Jy ! Component: 150 - total flux cleaned = -0.00340199 Jy ! Component: 200 - total flux cleaned = -0.00431339 Jy ! Total flux subtracted in 200 components = -0.00431339 Jy ! Clean residual min=-0.023408 max=0.031533 Jy/beam ! Clean residual mean=-0.000415 rms=0.006737 Jy/beam ! Combined flux in latest and established models = 0.299566 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.299566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.481936Jy sigma=0.000607 ! Fit after self-cal, rms=0.491046Jy sigma=0.000602 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.491046Jy sigma=0.000602 ! Fit after self-cal, rms=0.594378Jy sigma=0.000598 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=8.93 mas, bpa=-12.17 degrees ! Estimated noise=6544.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110548 Jy ! Component: 100 - total flux cleaned = -0.000572602 Jy ! Component: 150 - total flux cleaned = -0.00107144 Jy ! Component: 200 - total flux cleaned = -0.0014867 Jy ! Total flux subtracted in 200 components = -0.0014867 Jy ! Clean residual min=-0.021708 max=0.021992 Jy/beam ! Clean residual mean=-0.000197 rms=0.005475 Jy/beam ! Combined flux in latest and established models = 0.298079 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 67 components and 0.298079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.592994Jy sigma=0.000599 ! Fit after self-cal, rms=0.594553Jy sigma=0.000599 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.49162e-05 Jy ! Component: 100 - total flux cleaned = -0.000575362 Jy ! Component: 150 - total flux cleaned = -0.000577785 Jy ! Component: 200 - total flux cleaned = -0.000578363 Jy ! Total flux subtracted in 200 components = -0.000578363 Jy ! Clean residual min=-0.021515 max=0.021487 Jy/beam ! Clean residual mean=-0.000219 rms=0.005435 Jy/beam ! Combined flux in latest and established models = 0.297501 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.297501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.594307Jy sigma=0.000598 ! Fit after self-cal, rms=0.594319Jy sigma=0.000598 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.594319Jy sigma=0.000598 ! Fit after self-cal, rms=0.642876Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=8.976 mas, bpa=-11.44 degrees ! Estimated noise=6825.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00229421 Jy ! Component: 100 - total flux cleaned = -0.00254328 Jy ! Component: 150 - total flux cleaned = -0.00305555 Jy ! Component: 200 - total flux cleaned = -0.00334213 Jy ! Total flux subtracted in 200 components = -0.00334213 Jy ! Clean residual min=-0.022384 max=0.021694 Jy/beam ! Clean residual mean=-0.000300 rms=0.005561 Jy/beam ! Combined flux in latest and established models = 0.294159 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.294159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.641513Jy sigma=0.000593 ! Fit after self-cal, rms=0.642745Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.47231e-06 Jy ! Component: 100 - total flux cleaned = -0.00044866 Jy ! Component: 150 - total flux cleaned = -0.000443651 Jy ! Component: 200 - total flux cleaned = -0.00057926 Jy ! Total flux subtracted in 200 components = -0.00057926 Jy ! Clean residual min=-0.022202 max=0.021489 Jy/beam ! Clean residual mean=-0.000324 rms=0.005558 Jy/beam ! Combined flux in latest and established models = 0.29358 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.29358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.642481Jy sigma=0.000593 ! Fit after self-cal, rms=0.642400Jy sigma=0.000593 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.642400Jy sigma=0.000593 ! Fit after self-cal, rms=0.702854Jy sigma=0.000591 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.1 mas, bmaj=39.44 mas, bpa=-3.603 degrees ! Estimated noise=7517.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00218707 Jy ! Component: 100 - total flux cleaned = -0.0021915 Jy ! Component: 150 - total flux cleaned = -0.00219243 Jy ! Component: 200 - total flux cleaned = -0.00219238 Jy ! Total flux subtracted in 200 components = -0.00219238 Jy ! Clean residual min=-0.012231 max=0.009654 Jy/beam ! Clean residual mean=-0.000410 rms=0.004123 Jy/beam ! Combined flux in latest and established models = 0.291387 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 77 components and 0.291387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.702428Jy sigma=0.000591 ! Fit after self-cal, rms=0.703946Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135846 Jy ! Component: 100 - total flux cleaned = -0.000139254 Jy ! Component: 150 - total flux cleaned = -0.000140754 Jy ! Component: 200 - total flux cleaned = -0.000141738 Jy ! Total flux subtracted in 200 components = -0.000141738 Jy ! Clean residual min=-0.012218 max=0.009648 Jy/beam ! Clean residual mean=-0.000415 rms=0.004238 Jy/beam ! Combined flux in latest and established models = 0.291245 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 78 components and 0.291245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.703659Jy sigma=0.000591 ! Fit after self-cal, rms=0.703487Jy sigma=0.000591 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=8.954 mas, bpa=-10.47 degrees ! Estimated noise=7045.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 8.954 at -10.47 degrees (North through East) ! Clean map min=-0.020587 max=0.22807 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=7.353 mas, bpa=0.9755 degrees ! Estimated noise=19032.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.176299 Jy ! Component: 100 - total flux cleaned = 0.245038 Jy ! Component: 150 - total flux cleaned = 0.277758 Jy ! Component: 200 - total flux cleaned = 0.293427 Jy ! Total flux subtracted in 200 components = 0.293427 Jy ! Clean residual min=-0.055695 max=0.054306 Jy/beam ! Clean residual mean=-0.000042 rms=0.014620 Jy/beam ! Combined flux in latest and established models = 0.293427 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.293427 Jy ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=8.954 mas, bpa=-10.47 degrees ! Estimated noise=7045.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198026 Jy ! Component: 100 - total flux cleaned = -0.00220944 Jy ! Component: 150 - total flux cleaned = -0.00240477 Jy ! Component: 200 - total flux cleaned = -0.00257475 Jy ! Total flux subtracted in 200 components = -0.00257475 Jy ! Clean residual min=-0.022245 max=0.023782 Jy/beam ! Clean residual mean=-0.000273 rms=0.006072 Jy/beam ! Combined flux in latest and established models = 0.290852 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.290852 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.1 mas, bmaj=39.44 mas, bpa=-3.603 degrees ! Estimated noise=7517.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000649646 Jy ! Component: 100 - total flux cleaned = -0.000648613 Jy ! Component: 150 - total flux cleaned = -0.000648687 Jy ! Component: 200 - total flux cleaned = -0.000648422 Jy ! Total flux subtracted in 200 components = -0.000648422 Jy ! Clean residual min=-0.013470 max=0.011461 Jy/beam ! Clean residual mean=-0.000539 rms=0.004775 Jy/beam ! Combined flux in latest and established models = 0.290204 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.32071e-06 Jy ! Component: 100 - total flux cleaned = 5.15752e-06 Jy ! Component: 150 - total flux cleaned = 8.17798e-06 Jy ! Component: 200 - total flux cleaned = 1.15154e-05 Jy ! Total flux subtracted in 200 components = 1.15154e-05 Jy ! Clean residual min=-0.013385 max=0.011343 Jy/beam ! Clean residual mean=-0.000537 rms=0.004742 Jy/beam ! Combined flux in latest and established models = 0.290215 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 34 components and 0.290215 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=8.954 mas, bpa=-10.47 degrees ! Estimated noise=7045.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525761 Jy ! Component: 100 - total flux cleaned = 0.00036113 Jy ! Component: 150 - total flux cleaned = 0.00023178 Jy ! Component: 200 - total flux cleaned = 0.000226163 Jy ! Total flux subtracted in 200 components = 0.000226163 Jy ! Clean residual min=-0.022555 max=0.023820 Jy/beam ! Clean residual mean=-0.000297 rms=0.006032 Jy/beam ! Combined flux in latest and established models = 0.290442 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.290442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.703720Jy sigma=0.000594 ! Fit after self-cal, rms=0.704373Jy sigma=0.000593 wmodel J2325-4051_S_2017_01_21_pus_map.mod ! Writing 40 model components to file: J2325-4051_S_2017_01_21_pus_map.mod wobs J2325-4051_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2325-4051_S_2017_01_21_pus_uvs.fits wwins J2325-4051_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J2325-4051_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132282 Jy ! Component: 100 - total flux cleaned = -0.000521913 Jy ! Component: 150 - total flux cleaned = 0.00144961 Jy ! Component: 200 - total flux cleaned = 0.00329527 Jy ! Component: 250 - total flux cleaned = 0.00527039 Jy ! Component: 300 - total flux cleaned = 0.0075857 Jy ! Component: 350 - total flux cleaned = 0.00955234 Jy ! Component: 400 - total flux cleaned = 0.0120559 Jy ! Component: 450 - total flux cleaned = 0.0146828 Jy ! Component: 500 - total flux cleaned = 0.0172375 Jy ! Component: 550 - total flux cleaned = 0.0203181 Jy ! Component: 600 - total flux cleaned = 0.021837 Jy ! Component: 650 - total flux cleaned = 0.0229685 Jy ! Component: 700 - total flux cleaned = 0.0235338 Jy ! Component: 750 - total flux cleaned = 0.0244754 Jy ! Component: 800 - total flux cleaned = 0.0244733 Jy ! Component: 850 - total flux cleaned = 0.0239023 Jy ! Component: 900 - total flux cleaned = 0.0223526 Jy ! Component: 950 - total flux cleaned = 0.0205692 Jy ! Component: 1000 - total flux cleaned = 0.0189478 Jy ! Component: 1050 - total flux cleaned = 0.0168678 Jy ! Component: 1100 - total flux cleaned = 0.0147247 Jy ! Component: 1150 - total flux cleaned = 0.0125096 Jy ! Component: 1200 - total flux cleaned = 0.0104522 Jy ! Component: 1250 - total flux cleaned = 0.00808767 Jy ! Component: 1300 - total flux cleaned = 0.00563862 Jy ! Component: 1350 - total flux cleaned = 0.00310228 Jy ! Component: 1400 - total flux cleaned = 0.000205288 Jy ! Component: 1450 - total flux cleaned = -0.0022583 Jy ! Component: 1500 - total flux cleaned = -0.00509517 Jy ! Component: 1550 - total flux cleaned = -0.00804625 Jy ! Component: 1600 - total flux cleaned = -0.0111151 Jy ! Component: 1650 - total flux cleaned = -0.0146281 Jy ! Component: 1700 - total flux cleaned = -0.0179526 Jy ! Component: 1750 - total flux cleaned = -0.0221088 Jy ! Component: 1800 - total flux cleaned = -0.0257175 Jy ! Component: 1850 - total flux cleaned = -0.0298511 Jy ! Component: 1900 - total flux cleaned = -0.0345572 Jy ! Component: 1950 - total flux cleaned = -0.0386549 Jy ! Component: 2000 - total flux cleaned = -0.0433598 Jy ! Component: 2050 - total flux cleaned = -0.0487382 Jy ! Component: 2100 - total flux cleaned = -0.0553092 Jy ! Component: 2150 - total flux cleaned = -0.062685 Jy ! Component: 2200 - total flux cleaned = -0.0698935 Jy ! Component: 2250 - total flux cleaned = -0.0774717 Jy ! Component: 2300 - total flux cleaned = -0.0843081 Jy ! Component: 2350 - total flux cleaned = -0.0915003 Jy ! Component: 2400 - total flux cleaned = -0.0984372 Jy ! Component: 2450 - total flux cleaned = -0.10573 Jy ! Component: 2500 - total flux cleaned = -0.113431 Jy ! Component: 2550 - total flux cleaned = -0.120844 Jy ! Component: 2600 - total flux cleaned = -0.12865 Jy ! Component: 2650 - total flux cleaned = -0.136886 Jy ! Component: 2700 - total flux cleaned = -0.145599 Jy ! Component: 2750 - total flux cleaned = -0.15478 Jy ! Component: 2800 - total flux cleaned = -0.164474 Jy ! Component: 2850 - total flux cleaned = -0.173692 Jy ! Component: 2900 - total flux cleaned = -0.1856 Jy ! Component: 2950 - total flux cleaned = -0.197085 Jy ! Component: 3000 - total flux cleaned = -0.209218 Jy ! Component: 3050 - total flux cleaned = -0.222062 Jy ! Component: 3100 - total flux cleaned = -0.235611 Jy ! Component: 3150 - total flux cleaned = -0.251367 Jy ! Component: 3200 - total flux cleaned = -0.268044 Jy ! Component: 3250 - total flux cleaned = -0.284083 Jy ! Component: 3300 - total flux cleaned = -0.302736 Jy ! Component: 3350 - total flux cleaned = -0.322516 Jy ! Component: 3400 - total flux cleaned = -0.339568 Jy ! Component: 3450 - total flux cleaned = -0.361597 Jy ! Component: 3500 - total flux cleaned = -0.384839 Jy ! Component: 3550 - total flux cleaned = -0.409538 Jy ! Component: 3600 - total flux cleaned = -0.433321 Jy ! Component: 3650 - total flux cleaned = -0.460866 Jy ! Component: 3700 - total flux cleaned = -0.487355 Jy ! Component: 3750 - total flux cleaned = -0.518074 Jy ! Component: 3800 - total flux cleaned = -0.550678 Jy ! Component: 3850 - total flux cleaned = -0.581928 Jy ! Component: 3900 - total flux cleaned = -0.618439 Jy ! Component: 3950 - total flux cleaned = -0.656966 Jy ! Component: 4000 - total flux cleaned = -0.697532 Jy ! Component: 4050 - total flux cleaned = -0.740558 Jy ! Total flux subtracted in 4096 components = -0.786238 Jy ! Clean residual min=-0.258241 max=0.277054 Jy/beam ! Clean residual mean=-0.006541 rms=0.070668 Jy/beam ! Combined flux in latest and established models = -0.495797 Jy keep ! Adding 211 model components to the UV plane model. ! The established model now contains 251 components and -0.495797 Jy ![Exited script file: muppet] wmap "J2325-4051_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 8.954 at -10.47 degrees (North through East) ! Clean map min=-0.21913 max=0.27747 Jy/beam ! Writing clean map to FITS file: J2325-4051_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.277469 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0478698 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -51.757 51.757 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.1436 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.277 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 8.954 at -10.47 degrees (North through East) ! Clean map min=-0.21913 max=0.27747 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2325-4051_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:06:51 2019