! Started logfile: J2325-4051_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:26:12 2019 obs J2325-4051_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2325-4051_S_2017_01_16_pus_uva.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.454795 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2325-4051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 5976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2325-4051_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 226 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 226 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 226 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.860492Jy sigma=0.004663 ! Fit after self-cal, rms=0.828024Jy sigma=0.004510 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=27.99 mas, bpa=25.84 degrees ! Estimated noise=3095.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.157373 Jy ! Component: 100 - total flux cleaned = 0.245934 Jy ! Total flux subtracted in 100 components = 0.245934 Jy ! Clean residual min=-0.030490 max=0.047357 Jy/beam ! Clean residual mean=-0.002725 rms=0.015396 Jy/beam ! Combined flux in latest and established models = 0.245934 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 68 components and 0.245934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254759Jy sigma=0.000931 ! Fit after self-cal, rms=0.254374Jy sigma=0.000927 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=29.49 mas, bpa=25.1 degrees ! Estimated noise=1799.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0685315 Jy ! Component: 100 - total flux cleaned = 0.117603 Jy ! Component: 150 - total flux cleaned = 0.155037 Jy ! Component: 200 - total flux cleaned = 0.18476 Jy ! Total flux subtracted in 200 components = 0.18476 Jy ! Clean residual min=-0.017209 max=0.017525 Jy/beam ! Clean residual mean=-0.001776 rms=0.008039 Jy/beam ! Combined flux in latest and established models = 0.430694 Jy ! Performing phase self-cal ! Adding 124 model components to the UV plane model. ! The established model now contains 192 components and 0.430694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221008Jy sigma=0.000714 ! Fit after self-cal, rms=0.220711Jy sigma=0.000712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.03 ! LA 1.02 MK 1.00* NL 1.00 OV 1.07 ! PT 0.80 SC 1.17 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 1.00* KP 1.00 ! LA 0.99 MK 1.00* NL 1.12 OV 1.08 ! PT 0.79 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.00* KP 1.04 ! LA 1.04 MK 1.00* NL 1.07 OV 1.03 ! PT 0.79 SC 1.12 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.21 HN 1.00* KP 0.97 ! LA 0.38 MK 1.00* NL 1.00* OV 0.97 ! PT 0.86 SC 0.87 ! ! ! Fit before self-cal, rms=0.220711Jy sigma=0.000712 ! Fit after self-cal, rms=0.137546Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.889 mas, bmaj=30.34 mas, bpa=25.12 degrees ! Estimated noise=1773.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146221 Jy ! Component: 100 - total flux cleaned = 0.00262162 Jy ! Component: 150 - total flux cleaned = 0.00292459 Jy ! Component: 200 - total flux cleaned = 0.00209595 Jy ! Total flux subtracted in 200 components = 0.00209595 Jy ! Clean residual min=-0.004324 max=0.004311 Jy/beam ! Clean residual mean=-0.000209 rms=0.002051 Jy/beam ! Combined flux in latest and established models = 0.43279 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 265 components and 0.43279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135665Jy sigma=0.000641 ! Fit after self-cal, rms=0.135470Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135470Jy sigma=0.000640 ! Fit after self-cal, rms=0.134520Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=30.18 mas, bpa=25.08 degrees ! Estimated noise=1766.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508041 Jy ! Component: 100 - total flux cleaned = 0.000488353 Jy ! Component: 150 - total flux cleaned = 0.000287186 Jy ! Component: 200 - total flux cleaned = 0.000614274 Jy ! Total flux subtracted in 200 components = 0.000614274 Jy ! Clean residual min=-0.002683 max=0.002703 Jy/beam ! Clean residual mean=-0.000112 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.433404 Jy selfcal ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 346 components and 0.433404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133928Jy sigma=0.000637 ! Fit after self-cal, rms=0.133971Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101458 Jy ! Component: 100 - total flux cleaned = 0.000859464 Jy ! Component: 150 - total flux cleaned = 0.000855591 Jy ! Component: 200 - total flux cleaned = 0.00096569 Jy ! Total flux subtracted in 200 components = 0.00096569 Jy ! Clean residual min=-0.001886 max=0.001867 Jy/beam ! Clean residual mean=-0.000061 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.43437 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 399 components and 0.43437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133671Jy sigma=0.000635 ! Fit after self-cal, rms=0.133643Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133643Jy sigma=0.000635 ! Fit after self-cal, rms=0.133434Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.89 mas, bmaj=30.17 mas, bpa=25.11 degrees ! Estimated noise=1762.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247621 Jy ! Component: 100 - total flux cleaned = 2.9244e-05 Jy ! Component: 150 - total flux cleaned = -0.000564178 Jy ! Component: 200 - total flux cleaned = -0.00111203 Jy ! Total flux subtracted in 200 components = -0.00111203 Jy ! Clean residual min=-0.001450 max=0.001453 Jy/beam ! Clean residual mean=-0.000042 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.433258 Jy selfcal ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 449 components and 0.433258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133244Jy sigma=0.000634 ! Fit after self-cal, rms=0.133234Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217263 Jy ! Component: 100 - total flux cleaned = -0.00056663 Jy ! Component: 150 - total flux cleaned = -0.00105408 Jy ! Component: 200 - total flux cleaned = -0.00157115 Jy ! Total flux subtracted in 200 components = -0.00157115 Jy ! Clean residual min=-0.001191 max=0.001193 Jy/beam ! Clean residual mean=-0.000023 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.431686 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 490 components and 0.431686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133101Jy sigma=0.000634 ! Fit after self-cal, rms=0.133067Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133067Jy sigma=0.000634 ! Fit after self-cal, rms=0.133085Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.05 mas, bmaj=46.25 mas, bpa=11.67 degrees ! Estimated noise=1979.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000675131 Jy ! Component: 100 - total flux cleaned = 0.00125651 Jy ! Component: 150 - total flux cleaned = 0.00149126 Jy ! Component: 200 - total flux cleaned = 0.0015982 Jy ! Total flux subtracted in 200 components = 0.0015982 Jy ! Clean residual min=-0.000895 max=0.000895 Jy/beam ! Clean residual mean=-0.000019 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.433285 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 532 components and 0.433285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133021Jy sigma=0.000633 ! Fit after self-cal, rms=0.133031Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000318454 Jy ! Component: 100 - total flux cleaned = -0.000748048 Jy ! Component: 150 - total flux cleaned = -0.0013235 Jy ! Component: 200 - total flux cleaned = -0.00174387 Jy ! Total flux subtracted in 200 components = -0.00174387 Jy ! Clean residual min=-0.001236 max=0.001237 Jy/beam ! Clean residual mean=-0.000069 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.431541 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 562 components and 0.431541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132985Jy sigma=0.000633 ! Fit after self-cal, rms=0.132959Jy sigma=0.000633 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=30.16 mas, bpa=25.13 degrees ! Estimated noise=1764.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 30.16 at 25.13 degrees (North through East) ! Clean map min=-0.0053797 max=0.08494 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=28.94 mas, bpa=25.88 degrees ! Estimated noise=3044.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151269 Jy ! Component: 100 - total flux cleaned = 0.234163 Jy ! Component: 150 - total flux cleaned = 0.287798 Jy ! Component: 200 - total flux cleaned = 0.302982 Jy ! Total flux subtracted in 200 components = 0.302982 Jy ! Clean residual min=-0.025747 max=0.026081 Jy/beam ! Clean residual mean=-0.001296 rms=0.008719 Jy/beam ! Combined flux in latest and established models = 0.302982 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 108 model components to the UV plane model. ! The established model now contains 108 components and 0.302982 Jy ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=30.16 mas, bpa=25.13 degrees ! Estimated noise=1764.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353808 Jy ! Component: 100 - total flux cleaned = 0.0514243 Jy ! Component: 150 - total flux cleaned = 0.0565459 Jy ! Component: 200 - total flux cleaned = 0.0565503 Jy ! Total flux subtracted in 200 components = 0.0565503 Jy ! Clean residual min=-0.012013 max=0.011972 Jy/beam ! Clean residual mean=-0.000426 rms=0.004539 Jy/beam ! Combined flux in latest and established models = 0.359532 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 217 components and 0.359532 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.05 mas, bmaj=46.25 mas, bpa=11.67 degrees ! Estimated noise=1979.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00775953 Jy ! Component: 100 - total flux cleaned = -0.00425878 Jy ! Component: 150 - total flux cleaned = 0.000565579 Jy ! Component: 200 - total flux cleaned = 0.00349001 Jy ! Total flux subtracted in 200 components = 0.00349001 Jy ! Clean residual min=-0.004909 max=0.004922 Jy/beam ! Clean residual mean=-0.000187 rms=0.002378 Jy/beam ! Combined flux in latest and established models = 0.363022 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301078 Jy ! Component: 100 - total flux cleaned = 0.00619482 Jy ! Component: 150 - total flux cleaned = 0.00884573 Jy ! Component: 200 - total flux cleaned = 0.00968913 Jy ! Total flux subtracted in 200 components = 0.00968913 Jy ! Clean residual min=-0.003554 max=0.003541 Jy/beam ! Clean residual mean=-0.000063 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.372711 Jy ! Adding 177 model components to the UV plane model. ! The established model now contains 391 components and 0.372712 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=30.16 mas, bpa=25.13 degrees ! Estimated noise=1764.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017868 Jy ! Component: 100 - total flux cleaned = 0.000826017 Jy ! Component: 150 - total flux cleaned = -2.36218e-05 Jy ! Component: 200 - total flux cleaned = -0.00141808 Jy ! Total flux subtracted in 200 components = -0.00141808 Jy ! Clean residual min=-0.002030 max=0.002026 Jy/beam ! Clean residual mean=-0.000030 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.371294 Jy selfcal ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 453 components and 0.371294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133565Jy sigma=0.000635 ! Fit after self-cal, rms=0.133319Jy sigma=0.000634 wmodel J2325-4051_S_2017_01_16_pus_map.mod ! Writing 453 model components to file: J2325-4051_S_2017_01_16_pus_map.mod wobs J2325-4051_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2325-4051_S_2017_01_16_pus_uvs.fits wwins J2325-4051_S_2017_01_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2325-4051_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 30.16 at 25.13 degrees (North through East) ! Clean map min=-0.01281 max=0.082144 Jy/beam ! Writing clean map to FITS file: J2325-4051_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0821436 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000680375 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.48482 2.48482 4.96965 9.93929 19.8786 39.7572 79.5144 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 30.16 at 25.13 degrees (North through East) ! Clean map min=-0.01281 max=0.082144 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2325-4051_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:26:16 2019