! Started logfile: J2325+4806_S_2017_03_23_pus_uvs.log on Mon May 13 10:11:24 2019 obs J2325+4806_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2325+4806_S_2017_03_23_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.894753 visibilities/baseline/integration-bin. ! Found source: J2325+4806 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 23192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2325+4806_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 638 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.976172Jy sigma=0.008616 ! Fit after self-cal, rms=0.946909Jy sigma=0.008385 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.969 mas, bmaj=4.781 mas, bpa=-10.07 degrees ! Estimated noise=960.684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408685 Jy ! Component: 100 - total flux cleaned = 0.0512679 Jy ! Total flux subtracted in 100 components = 0.0512679 Jy ! Clean residual min=-0.004082 max=0.006844 Jy/beam ! Clean residual mean=0.000007 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.051268 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.051268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083427Jy sigma=0.000679 ! Fit after self-cal, rms=0.083055Jy sigma=0.000677 ! Inverting map ! Added new window around map position (5, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654136 Jy ! Component: 100 - total flux cleaned = 0.0103237 Jy ! Total flux subtracted in 100 components = 0.0103237 Jy ! Clean residual min=-0.003247 max=0.004908 Jy/beam ! Clean residual mean=0.000008 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.0615917 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.0615917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082310Jy sigma=0.000670 ! Fit after self-cal, rms=0.082255Jy sigma=0.000669 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=5.631 mas, bpa=-6.268 degrees ! Estimated noise=591.818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00650823 Jy ! Component: 100 - total flux cleaned = 0.0103147 Jy ! Component: 150 - total flux cleaned = 0.0129185 Jy ! Component: 200 - total flux cleaned = 0.0148505 Jy ! Total flux subtracted in 200 components = 0.0148505 Jy ! Clean residual min=-0.002807 max=0.003534 Jy/beam ! Clean residual mean=0.000012 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0764422 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 64 components and 0.0764422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081679Jy sigma=0.000664 ! Fit after self-cal, rms=0.081567Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.05 HN 0.97 KP 1.01 ! LA 0.91 MK 1.05 NL 0.90 OV 1.05 ! PT 0.97 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.05 HN 1.07 KP 1.02 ! LA 0.89 MK 1.02 NL 1.05 OV 1.19 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.14 HN 0.96 KP 0.88 ! LA 0.71 MK 1.04 NL 1.14 OV 0.95 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.10 HN 0.91 KP 1.00* ! LA 0.77 MK 0.95 NL 1.00* OV 1.04 ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.081567Jy sigma=0.000663 ! Fit after self-cal, rms=0.078984Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.727 mas, bmaj=5.689 mas, bpa=-6.315 degrees ! Estimated noise=583.781 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284103 Jy ! Component: 100 - total flux cleaned = 0.00436118 Jy ! Component: 150 - total flux cleaned = 0.00521709 Jy ! Component: 200 - total flux cleaned = 0.0057939 Jy ! Total flux subtracted in 200 components = 0.0057939 Jy ! Clean residual min=-0.001681 max=0.001916 Jy/beam ! Clean residual mean=0.000003 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0822361 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 99 components and 0.0822361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078865Jy sigma=0.000657 ! Fit after self-cal, rms=0.078861Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078861Jy sigma=0.000656 ! Fit after self-cal, rms=0.080620Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=5.676 mas, bpa=-5.649 degrees ! Estimated noise=583.615 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167293 Jy ! Component: 100 - total flux cleaned = 0.00245783 Jy ! Component: 150 - total flux cleaned = 0.00294775 Jy ! Component: 200 - total flux cleaned = 0.00315277 Jy ! Total flux subtracted in 200 components = 0.00315277 Jy ! Clean residual min=-0.001461 max=0.001484 Jy/beam ! Clean residual mean=-0.000002 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0853889 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 119 components and 0.0853889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080576Jy sigma=0.000654 ! Fit after self-cal, rms=0.080633Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595043 Jy ! Component: 100 - total flux cleaned = 0.00100669 Jy ! Component: 150 - total flux cleaned = 0.001167 Jy ! Component: 200 - total flux cleaned = 0.00121513 Jy ! Total flux subtracted in 200 components = 0.00121513 Jy ! Clean residual min=-0.001484 max=0.001409 Jy/beam ! Clean residual mean=-0.000001 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.086604 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 132 components and 0.086604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080612Jy sigma=0.000654 ! Fit after self-cal, rms=0.080606Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080606Jy sigma=0.000654 ! Fit after self-cal, rms=0.080729Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.71 mas, bmaj=5.674 mas, bpa=-5.547 degrees ! Estimated noise=580.979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000639287 Jy ! Component: 100 - total flux cleaned = 0.000974373 Jy ! Component: 150 - total flux cleaned = 0.00109285 Jy ! Component: 200 - total flux cleaned = 0.00117893 Jy ! Total flux subtracted in 200 components = 0.00117893 Jy ! Clean residual min=-0.001437 max=0.001367 Jy/beam ! Clean residual mean=-0.000002 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0877829 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 140 components and 0.0877829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080713Jy sigma=0.000653 ! Fit after self-cal, rms=0.080716Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285718 Jy ! Component: 100 - total flux cleaned = 0.000417926 Jy ! Component: 150 - total flux cleaned = 0.000497334 Jy ! Component: 200 - total flux cleaned = 0.000534311 Jy ! Total flux subtracted in 200 components = 0.000534311 Jy ! Clean residual min=-0.001375 max=0.001386 Jy/beam ! Clean residual mean=-0.000002 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.0883172 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 141 components and 0.0883173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080705Jy sigma=0.000653 ! Fit after self-cal, rms=0.080702Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080702Jy sigma=0.000653 ! Fit after self-cal, rms=0.080512Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.361 mas, bmaj=9.327 mas, bpa=5.035 degrees ! Estimated noise=695.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569604 Jy ! Component: 100 - total flux cleaned = 0.000800331 Jy ! Component: 150 - total flux cleaned = 0.000989835 Jy ! Component: 200 - total flux cleaned = 0.00106592 Jy ! Total flux subtracted in 200 components = 0.00106592 Jy ! Clean residual min=-0.001269 max=0.001515 Jy/beam ! Clean residual mean=-0.000004 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0893832 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 163 components and 0.0893832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080506Jy sigma=0.000653 ! Fit after self-cal, rms=0.080501Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-68, 114). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656245 Jy ! Component: 100 - total flux cleaned = 0.000556862 Jy ! Component: 150 - total flux cleaned = 0.000528008 Jy ! Component: 200 - total flux cleaned = 0.000461528 Jy ! Total flux subtracted in 200 components = 0.000461528 Jy ! Clean residual min=-0.001285 max=0.001285 Jy/beam ! Clean residual mean=-0.000005 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0898447 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 193 components and 0.0898447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080474Jy sigma=0.000653 ! Fit after self-cal, rms=0.080470Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=5.672 mas, bpa=-5.377 degrees ! Estimated noise=579.388 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.713 x 5.672 at -5.377 degrees (North through East) ! Clean map min=-0.0014479 max=0.052322 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=4.779 mas, bpa=-9.094 degrees ! Estimated noise=947.907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403881 Jy ! Component: 100 - total flux cleaned = 0.0525048 Jy ! Component: 150 - total flux cleaned = 0.0601757 Jy ! Component: 200 - total flux cleaned = 0.0656383 Jy ! Total flux subtracted in 200 components = 0.0656383 Jy ! Clean residual min=-0.003414 max=0.003291 Jy/beam ! Clean residual mean=0.000001 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.0656383 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0656383 Jy ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=5.672 mas, bpa=-5.377 degrees ! Estimated noise=579.388 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606322 Jy ! Component: 100 - total flux cleaned = 0.0102444 Jy ! Component: 150 - total flux cleaned = 0.0133488 Jy ! Component: 200 - total flux cleaned = 0.015418 Jy ! Total flux subtracted in 200 components = 0.015418 Jy ! Clean residual min=-0.001598 max=0.001661 Jy/beam ! Clean residual mean=-0.000000 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0810563 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 66 components and 0.0810563 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.361 mas, bmaj=9.327 mas, bpa=5.035 degrees ! Estimated noise=695.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296077 Jy ! Component: 100 - total flux cleaned = 0.00478151 Jy ! Component: 150 - total flux cleaned = 0.00578704 Jy ! Component: 200 - total flux cleaned = 0.00645096 Jy ! Total flux subtracted in 200 components = 0.00645096 Jy ! Clean residual min=-0.001345 max=0.001445 Jy/beam ! Clean residual mean=-0.000004 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0875073 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427312 Jy ! Component: 100 - total flux cleaned = 0.000722858 Jy ! Component: 150 - total flux cleaned = 0.000977364 Jy ! Component: 200 - total flux cleaned = 0.0011016 Jy ! Total flux subtracted in 200 components = 0.0011016 Jy ! Clean residual min=-0.001326 max=0.001320 Jy/beam ! Clean residual mean=-0.000005 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0886089 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 159 components and 0.0886089 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=5.672 mas, bpa=-5.377 degrees ! Estimated noise=579.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203195 Jy ! Component: 100 - total flux cleaned = 0.000320284 Jy ! Component: 150 - total flux cleaned = 0.000462905 Jy ! Component: 200 - total flux cleaned = 0.00049603 Jy ! Total flux subtracted in 200 components = 0.00049603 Jy ! Clean residual min=-0.001209 max=0.001247 Jy/beam ! Clean residual mean=-0.000003 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.0891049 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 184 components and 0.0891049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080479Jy sigma=0.000653 ! Fit after self-cal, rms=0.080476Jy sigma=0.000653 wmodel J2325+4806_S_2017_03_23_pus_map.mod ! Writing 184 model components to file: J2325+4806_S_2017_03_23_pus_map.mod wobs J2325+4806_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2325+4806_S_2017_03_23_pus_uvs.fits wwins J2325+4806_S_2017_03_23_pus_map.win ! wwins: Wrote 5 windows to J2325+4806_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 7.73452e-05 Jy ! Component: 100 - total flux cleaned = 3.30477e-05 Jy ! Component: 150 - total flux cleaned = -7.13337e-05 Jy ! Component: 200 - total flux cleaned = -5.11508e-05 Jy ! Component: 250 - total flux cleaned = 7.4997e-06 Jy ! Component: 300 - total flux cleaned = 0.000102691 Jy ! Component: 350 - total flux cleaned = 0.00017716 Jy ! Component: 400 - total flux cleaned = 0.00019575 Jy ! Component: 450 - total flux cleaned = 0.000231855 Jy ! Component: 500 - total flux cleaned = 0.000231891 Jy ! Component: 550 - total flux cleaned = 0.000163044 Jy ! Component: 600 - total flux cleaned = 0.000146108 Jy ! Component: 650 - total flux cleaned = 0.000129447 Jy ! Component: 700 - total flux cleaned = 0.000145958 Jy ! Component: 750 - total flux cleaned = 9.68853e-05 Jy ! Component: 800 - total flux cleaned = 3.29064e-05 Jy ! Component: 850 - total flux cleaned = 4.86446e-05 Jy ! Component: 900 - total flux cleaned = -1.37153e-05 Jy ! Component: 950 - total flux cleaned = -1.40131e-05 Jy ! Component: 1000 - total flux cleaned = -5.92882e-05 Jy ! Component: 1050 - total flux cleaned = -0.000104096 Jy ! Component: 1100 - total flux cleaned = -5.96106e-05 Jy ! Component: 1150 - total flux cleaned = -5.96765e-05 Jy ! Component: 1200 - total flux cleaned = -0.000103115 Jy ! Component: 1250 - total flux cleaned = -7.43512e-05 Jy ! Component: 1300 - total flux cleaned = -8.85933e-05 Jy ! Component: 1350 - total flux cleaned = -0.000102618 Jy ! Component: 1400 - total flux cleaned = -6.11191e-05 Jy ! Component: 1450 - total flux cleaned = -8.86006e-05 Jy ! Component: 1500 - total flux cleaned = -0.000129445 Jy ! Component: 1550 - total flux cleaned = -7.56719e-05 Jy ! Component: 1600 - total flux cleaned = -8.90822e-05 Jy ! Component: 1650 - total flux cleaned = -7.57811e-05 Jy ! Component: 1700 - total flux cleaned = -4.96511e-05 Jy ! Component: 1750 - total flux cleaned = -0.00010181 Jy ! Component: 1800 - total flux cleaned = -7.60634e-05 Jy ! Component: 1850 - total flux cleaned = -0.000140184 Jy ! Component: 1900 - total flux cleaned = -0.000152925 Jy ! Component: 1950 - total flux cleaned = -0.000152954 Jy ! Component: 2000 - total flux cleaned = -0.00020286 Jy ! Component: 2050 - total flux cleaned = -0.000202772 Jy ! Component: 2100 - total flux cleaned = -0.000202776 Jy ! Component: 2150 - total flux cleaned = -0.000239331 Jy ! Component: 2200 - total flux cleaned = -0.000251614 Jy ! Component: 2250 - total flux cleaned = -0.000263636 Jy ! Component: 2300 - total flux cleaned = -0.000275692 Jy ! Component: 2350 - total flux cleaned = -0.000323224 Jy ! Component: 2400 - total flux cleaned = -0.00032319 Jy ! Component: 2450 - total flux cleaned = -0.000370028 Jy ! Component: 2500 - total flux cleaned = -0.00033511 Jy ! Component: 2550 - total flux cleaned = -0.000404291 Jy ! Component: 2600 - total flux cleaned = -0.000392886 Jy ! Component: 2650 - total flux cleaned = -0.000427083 Jy ! Component: 2700 - total flux cleaned = -0.000404372 Jy ! Component: 2750 - total flux cleaned = -0.000382039 Jy ! Component: 2800 - total flux cleaned = -0.000437746 Jy ! Component: 2850 - total flux cleaned = -0.000404546 Jy ! Component: 2900 - total flux cleaned = -0.000393499 Jy ! Component: 2950 - total flux cleaned = -0.00044832 Jy ! Component: 3000 - total flux cleaned = -0.000415624 Jy ! Component: 3050 - total flux cleaned = -0.000458879 Jy ! Component: 3100 - total flux cleaned = -0.000437373 Jy ! Component: 3150 - total flux cleaned = -0.000405506 Jy ! Component: 3200 - total flux cleaned = -0.000405503 Jy ! Component: 3250 - total flux cleaned = -0.000447673 Jy ! Component: 3300 - total flux cleaned = -0.000458166 Jy ! Component: 3350 - total flux cleaned = -0.000447731 Jy ! Component: 3400 - total flux cleaned = -0.000437338 Jy ! Component: 3450 - total flux cleaned = -0.000478358 Jy ! Component: 3500 - total flux cleaned = -0.000498837 Jy ! Component: 3550 - total flux cleaned = -0.000498829 Jy ! Component: 3600 - total flux cleaned = -0.000498829 Jy ! Component: 3650 - total flux cleaned = -0.000458691 Jy ! Component: 3700 - total flux cleaned = -0.000468707 Jy ! Component: 3750 - total flux cleaned = -0.000468704 Jy ! Component: 3800 - total flux cleaned = -0.000498376 Jy ! Component: 3850 - total flux cleaned = -0.000449286 Jy ! Component: 3900 - total flux cleaned = -0.000429856 Jy ! Component: 3950 - total flux cleaned = -0.000468738 Jy ! Component: 4000 - total flux cleaned = -0.000468758 Jy ! Component: 4050 - total flux cleaned = -0.000459173 Jy ! Total flux subtracted in 4096 components = -0.000506889 Jy ! Clean residual min=-0.000581 max=0.000477 Jy/beam ! Clean residual mean=-0.000001 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.088598 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 466 components and 0.088598 Jy ![Exited script file: muppet] wmap "J2325+4806_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.713 x 5.672 at -5.377 degrees (North through East) ! Clean map min=-0.0017921 max=0.051724 Jy/beam ! Writing clean map to FITS file: J2325+4806_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0517244 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0001735 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0063 1.0063 2.01259 4.02519 8.05037 16.1007 32.2015 64.403 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.713 x 5.672 at -5.377 degrees (North through East) ! Clean map min=-0.0017921 max=0.051724 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2325+4806_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:11:30 2019