! Started logfile: J2325+3957_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:26:07 2019 obs J2325+3957_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2325+3957_S_2017_01_16_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.760582 visibilities/baseline/integration-bin. ! Found source: J2325+3957 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 11500 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2325+3957_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 283 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.941065Jy sigma=0.007990 ! Fit after self-cal, rms=0.924150Jy sigma=0.007913 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.89 mas, bmaj=6.412 mas, bpa=19.15 degrees ! Estimated noise=1040.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0622719 Jy ! Component: 100 - total flux cleaned = 0.0759889 Jy ! Total flux subtracted in 100 components = 0.0759889 Jy ! Clean residual min=-0.003436 max=0.004454 Jy/beam ! Clean residual mean=-0.000000 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.0759889 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0759889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109412Jy sigma=0.000656 ! Fit after self-cal, rms=0.109374Jy sigma=0.000656 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.557 mas, bmaj=7.142 mas, bpa=20.31 degrees ! Estimated noise=842.912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00566489 Jy ! Component: 100 - total flux cleaned = 0.00789715 Jy ! Component: 150 - total flux cleaned = 0.00845838 Jy ! Component: 200 - total flux cleaned = 0.00863472 Jy ! Total flux subtracted in 200 components = 0.00863472 Jy ! Clean residual min=-0.002809 max=0.003046 Jy/beam ! Clean residual mean=0.000000 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0846236 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.0846236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109203Jy sigma=0.000653 ! Fit after self-cal, rms=0.109202Jy sigma=0.000652 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.93 KP 0.98 ! LA 0.97 MK 1.00* NL 0.86 OV 0.97 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.97 KP 0.96 ! LA 0.93 MK 1.00* NL 1.02 OV 1.01 ! PT 1.02 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.04 HN 1.03 KP 0.98 ! LA 0.98 MK 1.00* NL 0.93 OV 0.92 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 0.91 KP 1.00* ! LA 1.03 MK 1.00* NL 1.00* OV 1.03 ! PT 1.01 SC 0.62 ! ! ! Fit before self-cal, rms=0.109202Jy sigma=0.000652 ! Fit after self-cal, rms=0.092504Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.583 mas, bmaj=7.138 mas, bpa=19.42 degrees ! Estimated noise=833.092 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000801047 Jy ! Component: 100 - total flux cleaned = -0.00105776 Jy ! Component: 150 - total flux cleaned = -0.00117084 Jy ! Component: 200 - total flux cleaned = -0.00117144 Jy ! Total flux subtracted in 200 components = -0.00117144 Jy ! Clean residual min=-0.002346 max=0.002384 Jy/beam ! Clean residual mean=0.000001 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0834522 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.0834522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092460Jy sigma=0.000650 ! Fit after self-cal, rms=0.092438Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092438Jy sigma=0.000649 ! Fit after self-cal, rms=0.095147Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.567 mas, bmaj=7.108 mas, bpa=18.91 degrees ! Estimated noise=834.162 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000935187 Jy ! Component: 100 - total flux cleaned = 0.00095554 Jy ! Component: 150 - total flux cleaned = 0.000938325 Jy ! Component: 200 - total flux cleaned = 0.000952634 Jy ! Total flux subtracted in 200 components = 0.000952634 Jy ! Clean residual min=-0.001910 max=0.001703 Jy/beam ! Clean residual mean=-0.000008 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0844048 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.0844048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095133Jy sigma=0.000646 ! Fit after self-cal, rms=0.095311Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156698 Jy ! Component: 100 - total flux cleaned = 8.45703e-05 Jy ! Component: 150 - total flux cleaned = 4.72137e-05 Jy ! Component: 200 - total flux cleaned = 2.56635e-05 Jy ! Total flux subtracted in 200 components = 2.56635e-05 Jy ! Clean residual min=-0.001945 max=0.001644 Jy/beam ! Clean residual mean=-0.000009 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0844304 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.0844305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095305Jy sigma=0.000646 ! Fit after self-cal, rms=0.095308Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095308Jy sigma=0.000646 ! Fit after self-cal, rms=0.096288Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.558 mas, bmaj=7.088 mas, bpa=18.54 degrees ! Estimated noise=835.249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718125 Jy ! Component: 100 - total flux cleaned = 0.000770659 Jy ! Component: 150 - total flux cleaned = 0.00077053 Jy ! Component: 200 - total flux cleaned = 0.00078046 Jy ! Total flux subtracted in 200 components = 0.00078046 Jy ! Clean residual min=-0.001892 max=0.001650 Jy/beam ! Clean residual mean=-0.000009 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0852109 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.0852109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096281Jy sigma=0.000645 ! Fit after self-cal, rms=0.096310Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.35507e-05 Jy ! Component: 100 - total flux cleaned = 6.35891e-05 Jy ! Component: 150 - total flux cleaned = 5.51576e-05 Jy ! Component: 200 - total flux cleaned = 4.69981e-05 Jy ! Total flux subtracted in 200 components = 4.69981e-05 Jy ! Clean residual min=-0.001877 max=0.001639 Jy/beam ! Clean residual mean=-0.000009 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0852579 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.0852579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096307Jy sigma=0.000645 ! Fit after self-cal, rms=0.096309Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096309Jy sigma=0.000645 ! Fit after self-cal, rms=0.096587Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=9.25 mas, bpa=-0.3249 degrees ! Estimated noise=983.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635202 Jy ! Component: 100 - total flux cleaned = 0.000900403 Jy ! Component: 150 - total flux cleaned = 0.000943385 Jy ! Component: 200 - total flux cleaned = 0.000972887 Jy ! Total flux subtracted in 200 components = 0.000972887 Jy ! Clean residual min=-0.002020 max=0.001657 Jy/beam ! Clean residual mean=-0.000018 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0862308 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.0862308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096587Jy sigma=0.000645 ! Fit after self-cal, rms=0.096598Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.1638e-05 Jy ! Component: 100 - total flux cleaned = 9.02877e-05 Jy ! Component: 150 - total flux cleaned = 0.000113734 Jy ! Component: 200 - total flux cleaned = 0.000123543 Jy ! Total flux subtracted in 200 components = 0.000123543 Jy ! Clean residual min=-0.002017 max=0.001666 Jy/beam ! Clean residual mean=-0.000019 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0863544 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.0863544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096598Jy sigma=0.000645 ! Fit after self-cal, rms=0.096600Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.551 mas, bmaj=7.076 mas, bpa=18.34 degrees ! Estimated noise=836.047 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.551 x 7.076 at 18.34 degrees (North through East) ! Clean map min=-0.0018453 max=0.079736 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.867 mas, bmaj=6.363 mas, bpa=17.31 degrees ! Estimated noise=1022.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608201 Jy ! Component: 100 - total flux cleaned = 0.0750368 Jy ! Component: 150 - total flux cleaned = 0.0808622 Jy ! Component: 200 - total flux cleaned = 0.0835598 Jy ! Total flux subtracted in 200 components = 0.0835598 Jy ! Clean residual min=-0.002706 max=0.002228 Jy/beam ! Clean residual mean=-0.000002 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0835598 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0835598 Jy ! Inverting map and beam ! Estimated beam: bmin=4.551 mas, bmaj=7.076 mas, bpa=18.34 degrees ! Estimated noise=836.047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205033 Jy ! Component: 100 - total flux cleaned = 0.00215035 Jy ! Component: 150 - total flux cleaned = 0.00219178 Jy ! Component: 200 - total flux cleaned = 0.00225665 Jy ! Total flux subtracted in 200 components = 0.00225665 Jy ! Clean residual min=-0.001963 max=0.001568 Jy/beam ! Clean residual mean=-0.000009 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0858165 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.0858165 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=9.25 mas, bpa=-0.3249 degrees ! Estimated noise=983.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517937 Jy ! Component: 100 - total flux cleaned = 0.000526373 Jy ! Component: 150 - total flux cleaned = 0.0005199 Jy ! Component: 200 - total flux cleaned = 0.000514062 Jy ! Total flux subtracted in 200 components = 0.000514062 Jy ! Clean residual min=-0.002032 max=0.001657 Jy/beam ! Clean residual mean=-0.000019 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0863305 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.7468e-06 Jy ! Component: 100 - total flux cleaned = -4.28287e-06 Jy ! Component: 150 - total flux cleaned = -4.09453e-06 Jy ! Component: 200 - total flux cleaned = -3.8976e-06 Jy ! Total flux subtracted in 200 components = -3.8976e-06 Jy ! Clean residual min=-0.002030 max=0.001655 Jy/beam ! Clean residual mean=-0.000019 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0863266 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.0863266 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.551 mas, bmaj=7.076 mas, bpa=18.34 degrees ! Estimated noise=836.047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239217 Jy ! Component: 100 - total flux cleaned = -0.000314246 Jy ! Component: 150 - total flux cleaned = -0.000394351 Jy ! Component: 200 - total flux cleaned = -0.000450476 Jy ! Total flux subtracted in 200 components = -0.000450476 Jy ! Clean residual min=-0.001882 max=0.001604 Jy/beam ! Clean residual mean=-0.000009 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0858762 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.0858762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096610Jy sigma=0.000645 ! Fit after self-cal, rms=0.096600Jy sigma=0.000645 wmodel J2325+3957_S_2017_01_16_pus_map.mod ! Writing 51 model components to file: J2325+3957_S_2017_01_16_pus_map.mod wobs J2325+3957_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2325+3957_S_2017_01_16_pus_uvs.fits wwins J2325+3957_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2325+3957_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000875248 Jy ! Component: 100 - total flux cleaned = -0.00168395 Jy ! Component: 150 - total flux cleaned = -0.00235918 Jy ! Component: 200 - total flux cleaned = -0.00292043 Jy ! Component: 250 - total flux cleaned = -0.0034061 Jy ! Component: 300 - total flux cleaned = -0.00387819 Jy ! Component: 350 - total flux cleaned = -0.00425688 Jy ! Component: 400 - total flux cleaned = -0.00452088 Jy ! Component: 450 - total flux cleaned = -0.00477984 Jy ! Component: 500 - total flux cleaned = -0.00503303 Jy ! Component: 550 - total flux cleaned = -0.00518169 Jy ! Component: 600 - total flux cleaned = -0.00530335 Jy ! Component: 650 - total flux cleaned = -0.00535158 Jy ! Component: 700 - total flux cleaned = -0.00546943 Jy ! Component: 750 - total flux cleaned = -0.00549245 Jy ! Component: 800 - total flux cleaned = -0.00556155 Jy ! Component: 850 - total flux cleaned = -0.00556188 Jy ! Component: 900 - total flux cleaned = -0.00569593 Jy ! Component: 950 - total flux cleaned = -0.00571792 Jy ! Component: 1000 - total flux cleaned = -0.00576153 Jy ! Component: 1050 - total flux cleaned = -0.00578298 Jy ! Component: 1100 - total flux cleaned = -0.00584693 Jy ! Component: 1150 - total flux cleaned = -0.00582626 Jy ! Component: 1200 - total flux cleaned = -0.00588856 Jy ! Component: 1250 - total flux cleaned = -0.00592963 Jy ! Component: 1300 - total flux cleaned = -0.00599029 Jy ! Component: 1350 - total flux cleaned = -0.00601027 Jy ! Component: 1400 - total flux cleaned = -0.00599068 Jy ! Component: 1450 - total flux cleaned = -0.00606909 Jy ! Component: 1500 - total flux cleaned = -0.00608839 Jy ! Component: 1550 - total flux cleaned = -0.0061457 Jy ! Component: 1600 - total flux cleaned = -0.00616452 Jy ! Component: 1650 - total flux cleaned = -0.00620165 Jy ! Component: 1700 - total flux cleaned = -0.00616441 Jy ! Component: 1750 - total flux cleaned = -0.00627503 Jy ! Component: 1800 - total flux cleaned = -0.00631142 Jy ! Component: 1850 - total flux cleaned = -0.00632952 Jy ! Component: 1900 - total flux cleaned = -0.00634722 Jy ! Component: 1950 - total flux cleaned = -0.00634703 Jy ! Component: 2000 - total flux cleaned = -0.00634649 Jy ! Component: 2050 - total flux cleaned = -0.00634675 Jy ! Component: 2100 - total flux cleaned = -0.00632944 Jy ! Component: 2150 - total flux cleaned = -0.00639785 Jy ! Component: 2200 - total flux cleaned = -0.00634696 Jy ! Component: 2250 - total flux cleaned = -0.00641404 Jy ! Component: 2300 - total flux cleaned = -0.00644718 Jy ! Component: 2350 - total flux cleaned = -0.00641406 Jy ! Component: 2400 - total flux cleaned = -0.00644678 Jy ! Component: 2450 - total flux cleaned = -0.00643054 Jy ! Component: 2500 - total flux cleaned = -0.00644668 Jy ! Component: 2550 - total flux cleaned = -0.00638281 Jy ! Component: 2600 - total flux cleaned = -0.00649424 Jy ! Component: 2650 - total flux cleaned = -0.00643102 Jy ! Component: 2700 - total flux cleaned = -0.00646239 Jy ! Component: 2750 - total flux cleaned = -0.0064624 Jy ! Component: 2800 - total flux cleaned = -0.00647768 Jy ! Component: 2850 - total flux cleaned = -0.00644727 Jy ! Component: 2900 - total flux cleaned = -0.00646263 Jy ! Component: 2950 - total flux cleaned = -0.00650789 Jy ! Component: 3000 - total flux cleaned = -0.00649286 Jy ! Component: 3050 - total flux cleaned = -0.00652253 Jy ! Component: 3100 - total flux cleaned = -0.00650781 Jy ! Component: 3150 - total flux cleaned = -0.0065955 Jy ! Component: 3200 - total flux cleaned = -0.00656627 Jy ! Component: 3250 - total flux cleaned = -0.00658079 Jy ! Component: 3300 - total flux cleaned = -0.00663815 Jy ! Component: 3350 - total flux cleaned = -0.00660965 Jy ! Component: 3400 - total flux cleaned = -0.00665194 Jy ! Component: 3450 - total flux cleaned = -0.00663781 Jy ! Component: 3500 - total flux cleaned = -0.00662392 Jy ! Component: 3550 - total flux cleaned = -0.00663771 Jy ! Component: 3600 - total flux cleaned = -0.00659653 Jy ! Component: 3650 - total flux cleaned = -0.00662401 Jy ! Component: 3700 - total flux cleaned = -0.00665134 Jy ! Component: 3750 - total flux cleaned = -0.00666498 Jy ! Component: 3800 - total flux cleaned = -0.00670524 Jy ! Component: 3850 - total flux cleaned = -0.00670518 Jy ! Component: 3900 - total flux cleaned = -0.00670513 Jy ! Component: 3950 - total flux cleaned = -0.00673128 Jy ! Component: 4000 - total flux cleaned = -0.00683585 Jy ! Component: 4050 - total flux cleaned = -0.00679681 Jy ! Total flux subtracted in 4096 components = -0.00679684 Jy ! Clean residual min=-0.000793 max=0.000830 Jy/beam ! Clean residual mean=-0.000006 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.0790793 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 330 components and 0.0790793 Jy ![Exited script file: muppet] wmap "J2325+3957_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.551 x 7.076 at 18.34 degrees (North through East) ! Clean map min=-0.0014599 max=0.079664 Jy/beam ! Writing clean map to FITS file: J2325+3957_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0796639 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000242306 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.912483 0.912483 1.82497 3.64993 7.29986 14.5997 29.1994 58.3989 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.551 x 7.076 at 18.34 degrees (North through East) ! Clean map min=-0.0014599 max=0.079664 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2325+3957_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:26:12 2019