! Started logfile: J2322+6911_S_2017_06_10_pus_uvs.log on Mon May 6 15:03:25 2019 obs J2322+6911_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J2322+6911_S_2017_06_10_pus_uva.fits ! AN table 1: 191 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.978592 visibilities/baseline/integration-bin. ! Found source: J2322+6911 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 33644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2322+6911_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 981 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.872641Jy sigma=0.008661 ! Fit after self-cal, rms=0.861865Jy sigma=0.008557 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=3.701 mas, bpa=-10.42 degrees ! Estimated noise=751.302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100738 Jy ! Component: 100 - total flux cleaned = 0.130733 Jy ! Total flux subtracted in 100 components = 0.130733 Jy ! Clean residual min=-0.007728 max=0.017011 Jy/beam ! Clean residual mean=-0.000030 rms=0.001667 Jy/beam ! Combined flux in latest and established models = 0.130733 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.130733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084869Jy sigma=0.000818 ! Fit after self-cal, rms=0.084854Jy sigma=0.000818 ! Inverting map ! Added new window around map position (-2, 13.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188963 Jy ! Component: 100 - total flux cleaned = 0.0321638 Jy ! Total flux subtracted in 100 components = 0.0321638 Jy ! Clean residual min=-0.005989 max=0.007479 Jy/beam ! Clean residual mean=-0.000020 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.162897 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.162897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078030Jy sigma=0.000745 ! Fit after self-cal, rms=0.077838Jy sigma=0.000743 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108154 Jy ! Component: 100 - total flux cleaned = 0.018846 Jy ! Total flux subtracted in 100 components = 0.018846 Jy ! Clean residual min=-0.004478 max=0.005451 Jy/beam ! Clean residual mean=-0.000015 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.181743 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 52 components and 0.181743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075268Jy sigma=0.000716 ! Fit after self-cal, rms=0.075185Jy sigma=0.000715 ! Inverting map ! Added new window around map position (-3, 18). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722192 Jy ! Component: 100 - total flux cleaned = 0.0127348 Jy ! Total flux subtracted in 100 components = 0.0127348 Jy ! Clean residual min=-0.003505 max=0.004571 Jy/beam ! Clean residual mean=-0.000012 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.194478 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 68 components and 0.194478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073996Jy sigma=0.000702 ! Fit after self-cal, rms=0.073946Jy sigma=0.000702 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=4.486 mas, bpa=-12.86 degrees ! Estimated noise=438.109 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00758431 Jy ! Component: 100 - total flux cleaned = 0.0128468 Jy ! Component: 150 - total flux cleaned = 0.0166444 Jy ! Component: 200 - total flux cleaned = 0.019439 Jy ! Total flux subtracted in 200 components = 0.019439 Jy ! Clean residual min=-0.002169 max=0.005402 Jy/beam ! Clean residual mean=-0.000019 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.213917 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 107 components and 0.213917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072954Jy sigma=0.000692 ! Fit after self-cal, rms=0.072894Jy sigma=0.000691 ! Inverting map ! Added new window around map position (9, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458471 Jy ! Component: 100 - total flux cleaned = 0.00726167 Jy ! Component: 150 - total flux cleaned = 0.00928622 Jy ! Component: 200 - total flux cleaned = 0.0108901 Jy ! Total flux subtracted in 200 components = 0.0108901 Jy ! Clean residual min=-0.001824 max=0.002522 Jy/beam ! Clean residual mean=-0.000010 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.224807 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 128 components and 0.224807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072563Jy sigma=0.000688 ! Fit after self-cal, rms=0.072540Jy sigma=0.000688 ! Inverting map ! Added new window around map position (-0.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024459 Jy ! Component: 100 - total flux cleaned = 0.00399347 Jy ! Component: 150 - total flux cleaned = 0.00482826 Jy ! Component: 200 - total flux cleaned = 0.00515928 Jy ! Total flux subtracted in 200 components = 0.00515928 Jy ! Clean residual min=-0.001558 max=0.001626 Jy/beam ! Clean residual mean=-0.000006 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.229966 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 141 components and 0.229966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072433Jy sigma=0.000687 ! Fit after self-cal, rms=0.072426Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 1.02 ! LA 1.01 MK 1.04 NL 0.91 OV 1.03 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.02 KP 0.97 ! LA 0.96 MK 1.05 NL 1.04 OV 1.03 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 1.01 KP 0.97 ! LA 0.99 MK 1.06 NL 1.00 OV 0.96 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.98 KP 1.00* ! LA 1.04 MK 1.01 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.072426Jy sigma=0.000686 ! Fit after self-cal, rms=0.072471Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=4.519 mas, bpa=-12.61 degrees ! Estimated noise=441.578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, 59). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168206 Jy ! Component: 100 - total flux cleaned = 0.00246913 Jy ! Component: 150 - total flux cleaned = 0.00298442 Jy ! Component: 200 - total flux cleaned = 0.00330288 Jy ! Total flux subtracted in 200 components = 0.00330288 Jy ! Clean residual min=-0.001361 max=0.001346 Jy/beam ! Clean residual mean=-0.000002 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.233269 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 155 components and 0.233269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072423Jy sigma=0.000682 ! Fit after self-cal, rms=0.072418Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072418Jy sigma=0.000682 ! Fit after self-cal, rms=0.072214Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.891 mas, bmaj=4.504 mas, bpa=-13.4 degrees ! Estimated noise=441.906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000797685 Jy ! Component: 100 - total flux cleaned = 0.00122704 Jy ! Component: 150 - total flux cleaned = 0.001503 Jy ! Component: 200 - total flux cleaned = 0.0015642 Jy ! Total flux subtracted in 200 components = 0.0015642 Jy ! Clean residual min=-0.001257 max=0.001353 Jy/beam ! Clean residual mean=-0.000002 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.234833 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 174 components and 0.234833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072196Jy sigma=0.000680 ! Fit after self-cal, rms=0.072196Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, -61). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115591 Jy ! Component: 100 - total flux cleaned = 0.00144183 Jy ! Component: 150 - total flux cleaned = 0.00174867 Jy ! Component: 200 - total flux cleaned = 0.00189529 Jy ! Total flux subtracted in 200 components = 0.00189529 Jy ! Clean residual min=-0.001223 max=0.001099 Jy/beam ! Clean residual mean=0.000002 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.236728 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 192 components and 0.236728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072170Jy sigma=0.000680 ! Fit after self-cal, rms=0.072169Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072169Jy sigma=0.000680 ! Fit after self-cal, rms=0.072205Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=4.502 mas, bpa=-13.43 degrees ! Estimated noise=442.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000580625 Jy ! Component: 100 - total flux cleaned = 0.000858561 Jy ! Component: 150 - total flux cleaned = 0.000994931 Jy ! Component: 200 - total flux cleaned = 0.00104953 Jy ! Total flux subtracted in 200 components = 0.00104953 Jy ! Clean residual min=-0.001192 max=0.001076 Jy/beam ! Clean residual mean=0.000000 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.237778 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 203 components and 0.237778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072194Jy sigma=0.000680 ! Fit after self-cal, rms=0.072194Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206529 Jy ! Component: 100 - total flux cleaned = 0.000258272 Jy ! Component: 150 - total flux cleaned = 0.000323572 Jy ! Component: 200 - total flux cleaned = 0.000369835 Jy ! Total flux subtracted in 200 components = 0.000369835 Jy ! Clean residual min=-0.001186 max=0.001083 Jy/beam ! Clean residual mean=0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.238148 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 209 components and 0.238148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072188Jy sigma=0.000680 ! Fit after self-cal, rms=0.072188Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072188Jy sigma=0.000680 ! Fit after self-cal, rms=0.072238Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.471 mas, bmaj=8.621 mas, bpa=-7.756 degrees ! Estimated noise=560.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585886 Jy ! Component: 100 - total flux cleaned = 0.000838282 Jy ! Component: 150 - total flux cleaned = 0.000919388 Jy ! Component: 200 - total flux cleaned = 0.000929835 Jy ! Total flux subtracted in 200 components = 0.000929835 Jy ! Clean residual min=-0.001202 max=0.001099 Jy/beam ! Clean residual mean=0.000001 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.239078 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 234 components and 0.239078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072235Jy sigma=0.000680 ! Fit after self-cal, rms=0.072235Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.60011e-05 Jy ! Component: 100 - total flux cleaned = 9.84871e-05 Jy ! Component: 150 - total flux cleaned = 7.94814e-05 Jy ! Component: 200 - total flux cleaned = 6.1776e-05 Jy ! Total flux subtracted in 200 components = 6.1776e-05 Jy ! Clean residual min=-0.001186 max=0.001097 Jy/beam ! Clean residual mean=0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.239139 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 254 components and 0.239139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072233Jy sigma=0.000680 ! Fit after self-cal, rms=0.072233Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.894 mas, bmaj=4.501 mas, bpa=-13.48 degrees ! Estimated noise=442.352 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.894 x 4.501 at -13.48 degrees (North through East) ! Clean map min=-0.0011282 max=0.13557 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=3.712 mas, bpa=-10.98 degrees ! Estimated noise=759.913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101124 Jy ! Component: 100 - total flux cleaned = 0.132828 Jy ! Component: 150 - total flux cleaned = 0.152693 Jy ! Component: 200 - total flux cleaned = 0.166799 Jy ! Total flux subtracted in 200 components = 0.166799 Jy ! Clean residual min=-0.003955 max=0.008076 Jy/beam ! Clean residual mean=-0.000022 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.166799 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.166799 Jy ! Inverting map and beam ! Estimated beam: bmin=3.894 mas, bmaj=4.501 mas, bpa=-13.48 degrees ! Estimated noise=442.352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168842 Jy ! Component: 100 - total flux cleaned = 0.0285379 Jy ! Component: 150 - total flux cleaned = 0.0370773 Jy ! Component: 200 - total flux cleaned = 0.0435776 Jy ! Total flux subtracted in 200 components = 0.0435776 Jy ! Clean residual min=-0.001885 max=0.003909 Jy/beam ! Clean residual mean=-0.000028 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.210377 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 91 components and 0.210377 Jy ! Inverting map ! Added new window around map position (2, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504381 Jy ! Component: 100 - total flux cleaned = 0.00900472 Jy ! Component: 150 - total flux cleaned = 0.0121563 Jy ! Component: 200 - total flux cleaned = 0.01468 Jy ! Total flux subtracted in 200 components = 0.01468 Jy ! Clean residual min=-0.001379 max=0.001613 Jy/beam ! Clean residual mean=-0.000014 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.225057 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 129 components and 0.225057 Jy ! Inverting map ! Added new window around map position (9, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209307 Jy ! Component: 100 - total flux cleaned = 0.00388456 Jy ! Component: 150 - total flux cleaned = 0.0054373 Jy ! Component: 200 - total flux cleaned = 0.00680438 Jy ! Total flux subtracted in 200 components = 0.00680438 Jy ! Clean residual min=-0.001200 max=0.001200 Jy/beam ! Clean residual mean=-0.000007 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.231861 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 151 components and 0.231861 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.471 mas, bmaj=8.621 mas, bpa=-7.756 degrees ! Estimated noise=560.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179021 Jy ! Component: 100 - total flux cleaned = 0.00304735 Jy ! Component: 150 - total flux cleaned = 0.00402835 Jy ! Component: 200 - total flux cleaned = 0.00482091 Jy ! Total flux subtracted in 200 components = 0.00482091 Jy ! Clean residual min=-0.001258 max=0.001284 Jy/beam ! Clean residual mean=-0.000004 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.236682 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000599926 Jy ! Component: 100 - total flux cleaned = 0.000973924 Jy ! Component: 150 - total flux cleaned = 0.00127865 Jy ! Component: 200 - total flux cleaned = 0.00152952 Jy ! Total flux subtracted in 200 components = 0.00152952 Jy ! Clean residual min=-0.001229 max=0.001219 Jy/beam ! Clean residual mean=-0.000001 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.238212 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 240 components and 0.238212 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.894 mas, bmaj=4.501 mas, bpa=-13.48 degrees ! Estimated noise=442.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133951 Jy ! Component: 100 - total flux cleaned = 3.32062e-05 Jy ! Component: 150 - total flux cleaned = 0.000236749 Jy ! Component: 200 - total flux cleaned = 0.000378406 Jy ! Total flux subtracted in 200 components = 0.000378406 Jy ! Clean residual min=-0.001170 max=0.001071 Jy/beam ! Clean residual mean=0.000000 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.23859 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 261 components and 0.23859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072265Jy sigma=0.000680 ! Fit after self-cal, rms=0.072258Jy sigma=0.000680 wmodel J2322+6911_S_2017_06_10_pus_map.mod ! Writing 261 model components to file: J2322+6911_S_2017_06_10_pus_map.mod wobs J2322+6911_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J2322+6911_S_2017_06_10_pus_uvs.fits wwins J2322+6911_S_2017_06_10_pus_map.win ! wwins: Wrote 9 windows to J2322+6911_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.4899e-05 Jy ! Component: 100 - total flux cleaned = -2.5483e-05 Jy ! Component: 150 - total flux cleaned = 1.17694e-05 Jy ! Component: 200 - total flux cleaned = 2.91381e-05 Jy ! Component: 250 - total flux cleaned = -4.11195e-05 Jy ! Component: 300 - total flux cleaned = -0.000126555 Jy ! Component: 350 - total flux cleaned = -0.000210084 Jy ! Component: 400 - total flux cleaned = -0.000292218 Jy ! Component: 450 - total flux cleaned = -0.000388762 Jy ! Component: 500 - total flux cleaned = -0.000467508 Jy ! Component: 550 - total flux cleaned = -0.000514041 Jy ! Component: 600 - total flux cleaned = -0.000590515 Jy ! Component: 650 - total flux cleaned = -0.000605554 Jy ! Component: 700 - total flux cleaned = -0.000694497 Jy ! Component: 750 - total flux cleaned = -0.000709042 Jy ! Component: 800 - total flux cleaned = -0.000781019 Jy ! Component: 850 - total flux cleaned = -0.000837812 Jy ! Component: 900 - total flux cleaned = -0.000879714 Jy ! Component: 950 - total flux cleaned = -0.000865911 Jy ! Component: 1000 - total flux cleaned = -0.000866123 Jy ! Component: 1050 - total flux cleaned = -0.000906739 Jy ! Component: 1100 - total flux cleaned = -0.000893474 Jy ! Component: 1150 - total flux cleaned = -0.00089364 Jy ! Component: 1200 - total flux cleaned = -0.000919671 Jy ! Component: 1250 - total flux cleaned = -0.000867512 Jy ! Component: 1300 - total flux cleaned = -0.000829107 Jy ! Component: 1350 - total flux cleaned = -0.000841819 Jy ! Component: 1400 - total flux cleaned = -0.000791378 Jy ! Component: 1450 - total flux cleaned = -0.000766326 Jy ! Component: 1500 - total flux cleaned = -0.00074142 Jy ! Component: 1550 - total flux cleaned = -0.000704546 Jy ! Component: 1600 - total flux cleaned = -0.000680312 Jy ! Component: 1650 - total flux cleaned = -0.000668413 Jy ! Component: 1700 - total flux cleaned = -0.000644458 Jy ! Component: 1750 - total flux cleaned = -0.000656427 Jy ! Component: 1800 - total flux cleaned = -0.00067981 Jy ! Component: 1850 - total flux cleaned = -0.00067964 Jy ! Component: 1900 - total flux cleaned = -0.000621694 Jy ! Component: 1950 - total flux cleaned = -0.000598744 Jy ! Component: 2000 - total flux cleaned = -0.000587397 Jy ! Component: 2050 - total flux cleaned = -0.000564741 Jy ! Component: 2100 - total flux cleaned = -0.000576093 Jy ! Component: 2150 - total flux cleaned = -0.000587209 Jy ! Component: 2200 - total flux cleaned = -0.000598215 Jy ! Component: 2250 - total flux cleaned = -0.000554353 Jy ! Component: 2300 - total flux cleaned = -0.000565336 Jy ! Component: 2350 - total flux cleaned = -0.000587002 Jy ! Component: 2400 - total flux cleaned = -0.000597713 Jy ! Component: 2450 - total flux cleaned = -0.000587122 Jy ! Component: 2500 - total flux cleaned = -0.000576556 Jy ! Component: 2550 - total flux cleaned = -0.000524101 Jy ! Component: 2600 - total flux cleaned = -0.0005763 Jy ! Component: 2650 - total flux cleaned = -0.000565952 Jy ! Component: 2700 - total flux cleaned = -0.000576338 Jy ! Component: 2750 - total flux cleaned = -0.000545611 Jy ! Component: 2800 - total flux cleaned = -0.000525185 Jy ! Component: 2850 - total flux cleaned = -0.000515204 Jy ! Component: 2900 - total flux cleaned = -0.00053528 Jy ! Component: 2950 - total flux cleaned = -0.000505205 Jy ! Component: 3000 - total flux cleaned = -0.00048542 Jy ! Component: 3050 - total flux cleaned = -0.000465697 Jy ! Component: 3100 - total flux cleaned = -0.00047552 Jy ! Component: 3150 - total flux cleaned = -0.000446219 Jy ! Component: 3200 - total flux cleaned = -0.000397657 Jy ! Component: 3250 - total flux cleaned = -0.000407315 Jy ! Component: 3300 - total flux cleaned = -0.000416991 Jy ! Component: 3350 - total flux cleaned = -0.000388267 Jy ! Component: 3400 - total flux cleaned = -0.000359793 Jy ! Component: 3450 - total flux cleaned = -0.000340824 Jy ! Component: 3500 - total flux cleaned = -0.000350222 Jy ! Component: 3550 - total flux cleaned = -0.000369043 Jy ! Component: 3600 - total flux cleaned = -0.000275868 Jy ! Component: 3650 - total flux cleaned = -0.000331571 Jy ! Component: 3700 - total flux cleaned = -0.000285518 Jy ! Component: 3750 - total flux cleaned = -0.000303973 Jy ! Component: 3800 - total flux cleaned = -0.000285728 Jy ! Component: 3850 - total flux cleaned = -0.000340264 Jy ! Component: 3900 - total flux cleaned = -0.0003131 Jy ! Component: 3950 - total flux cleaned = -0.000277062 Jy ! Component: 4000 - total flux cleaned = -0.00021435 Jy ! Component: 4050 - total flux cleaned = -0.000276788 Jy ! Total flux subtracted in 4096 components = -0.000267895 Jy ! Clean residual min=-0.000552 max=0.000502 Jy/beam ! Clean residual mean=0.000002 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.238322 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 543 components and 0.238322 Jy ![Exited script file: muppet] wmap "J2322+6911_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.894 x 4.501 at -13.48 degrees (North through East) ! Clean map min=-0.00086243 max=0.13609 Jy/beam ! Writing clean map to FITS file: J2322+6911_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.136089 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000160073 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.352872 0.352872 0.705745 1.41149 2.82298 5.64596 11.2919 22.5838 45.1677 90.3353 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.136 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.894 x 4.501 at -13.48 degrees (North through East) ! Clean map min=-0.00086243 max=0.13609 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2322+6911_S_2017_06_10_pus_uvs.log closed on Mon May 6 15:03:31 2019