! Started logfile: J2320+0513_S_2017_10_09_pus_uvs.log on Sun May 12 13:22:55 2019 obs J2320+0513_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2320+0513_S_2017_10_09_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.502778 visibilities/baseline/integration-bin. ! Found source: J2320+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2320+0513_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.259811Jy sigma=0.002136 ! Fit after self-cal, rms=0.239248Jy sigma=0.001992 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=11.97 mas, bpa=-15.77 degrees ! Estimated noise=3320.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.655913 Jy ! Component: 100 - total flux cleaned = 0.827984 Jy ! Total flux subtracted in 100 components = 0.827984 Jy ! Clean residual min=-0.035652 max=0.067123 Jy/beam ! Clean residual mean=-0.000039 rms=0.013250 Jy/beam ! Combined flux in latest and established models = 0.827983 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.827983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196440Jy sigma=0.001444 ! Fit after self-cal, rms=0.196415Jy sigma=0.001443 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.924 mas, bmaj=13.38 mas, bpa=-16.56 degrees ! Estimated noise=2822.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0803651 Jy ! Component: 100 - total flux cleaned = 0.122872 Jy ! Component: 150 - total flux cleaned = 0.148895 Jy ! Component: 200 - total flux cleaned = 0.165288 Jy ! Total flux subtracted in 200 components = 0.165288 Jy ! Clean residual min=-0.033857 max=0.029541 Jy/beam ! Clean residual mean=0.000034 rms=0.007700 Jy/beam ! Combined flux in latest and established models = 0.993271 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 62 components and 0.993271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154449Jy sigma=0.001156 ! Fit after self-cal, rms=0.154453Jy sigma=0.001156 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.92 HN 0.94 KP 1.09 ! LA 1.03 MK 1.02 NL 0.93 OV 1.00* ! PT 1.06 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.99 KP 1.04 ! LA 1.00 MK 1.00 NL 1.14 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.96 HN 0.97 KP 0.92 ! LA 0.81 MK 1.04 NL 1.08 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00 KP 1.00* ! LA 1.00* MK 1.02 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.154453Jy sigma=0.001156 ! Fit after self-cal, rms=0.118787Jy sigma=0.000881 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=13.65 mas, bpa=-16.52 degrees ! Estimated noise=2879.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00439786 Jy ! Component: 100 - total flux cleaned = -0.00642486 Jy ! Component: 150 - total flux cleaned = -0.0080684 Jy ! Component: 200 - total flux cleaned = -0.00902291 Jy ! Total flux subtracted in 200 components = -0.00902291 Jy ! Clean residual min=-0.020504 max=0.023948 Jy/beam ! Clean residual mean=-0.000001 rms=0.005701 Jy/beam ! Combined flux in latest and established models = 0.984249 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 84 components and 0.984248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116615Jy sigma=0.000872 ! Fit after self-cal, rms=0.116618Jy sigma=0.000872 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116618Jy sigma=0.000872 ! Fit after self-cal, rms=0.096083Jy sigma=0.000726 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.911 mas, bmaj=13.65 mas, bpa=-16.38 degrees ! Estimated noise=2873.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00871245 Jy ! Component: 100 - total flux cleaned = -0.0134549 Jy ! Component: 150 - total flux cleaned = -0.0158367 Jy ! Component: 200 - total flux cleaned = -0.016491 Jy ! Total flux subtracted in 200 components = -0.016491 Jy ! Clean residual min=-0.011746 max=0.009567 Jy/beam ! Clean residual mean=0.000025 rms=0.002710 Jy/beam ! Combined flux in latest and established models = 0.967757 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 93 components and 0.967757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095251Jy sigma=0.000719 ! Fit after self-cal, rms=0.095260Jy sigma=0.000719 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00058177 Jy ! Component: 100 - total flux cleaned = -0.000859716 Jy ! Component: 150 - total flux cleaned = -0.000918055 Jy ! Component: 200 - total flux cleaned = -0.000916197 Jy ! Total flux subtracted in 200 components = -0.000916197 Jy ! Clean residual min=-0.011483 max=0.009428 Jy/beam ! Clean residual mean=0.000025 rms=0.002693 Jy/beam ! Combined flux in latest and established models = 0.966841 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 104 components and 0.966841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095177Jy sigma=0.000719 ! Fit after self-cal, rms=0.095176Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095176Jy sigma=0.000719 ! Fit after self-cal, rms=0.095488Jy sigma=0.000716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=13.72 mas, bpa=-16.39 degrees ! Estimated noise=2875.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00448795 Jy ! Component: 100 - total flux cleaned = -0.00592637 Jy ! Component: 150 - total flux cleaned = -0.00668298 Jy ! Component: 200 - total flux cleaned = -0.00731649 Jy ! Total flux subtracted in 200 components = -0.00731649 Jy ! Clean residual min=-0.010821 max=0.008934 Jy/beam ! Clean residual mean=0.000021 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 0.959525 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 0.959525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095212Jy sigma=0.000714 ! Fit after self-cal, rms=0.095216Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000563154 Jy ! Component: 100 - total flux cleaned = -0.000982715 Jy ! Component: 150 - total flux cleaned = -0.00120199 Jy ! Component: 200 - total flux cleaned = -0.00125611 Jy ! Total flux subtracted in 200 components = -0.00125611 Jy ! Clean residual min=-0.010666 max=0.008863 Jy/beam ! Clean residual mean=0.000021 rms=0.002531 Jy/beam ! Combined flux in latest and established models = 0.958269 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.958269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095147Jy sigma=0.000714 ! Fit after self-cal, rms=0.095148Jy sigma=0.000714 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095148Jy sigma=0.000714 ! Fit after self-cal, rms=0.095498Jy sigma=0.000712 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.602 mas, bmaj=13.79 mas, bpa=-16.77 degrees ! Estimated noise=3307.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00229838 Jy ! Component: 100 - total flux cleaned = -0.00249595 Jy ! Component: 150 - total flux cleaned = -0.00255435 Jy ! Component: 200 - total flux cleaned = -0.0026029 Jy ! Total flux subtracted in 200 components = -0.0026029 Jy ! Clean residual min=-0.009772 max=0.008844 Jy/beam ! Clean residual mean=0.000034 rms=0.002568 Jy/beam ! Combined flux in latest and established models = 0.955666 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 131 components and 0.955666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095422Jy sigma=0.000712 ! Fit after self-cal, rms=0.095428Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204298 Jy ! Component: 100 - total flux cleaned = 0.000212621 Jy ! Component: 150 - total flux cleaned = 0.000212936 Jy ! Component: 200 - total flux cleaned = 0.000173155 Jy ! Total flux subtracted in 200 components = 0.000173155 Jy ! Clean residual min=-0.009830 max=0.008788 Jy/beam ! Clean residual mean=0.000034 rms=0.002557 Jy/beam ! Combined flux in latest and established models = 0.955839 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 135 components and 0.955839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095405Jy sigma=0.000712 ! Fit after self-cal, rms=0.095410Jy sigma=0.000712 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=13.78 mas, bpa=-16.41 degrees ! Estimated noise=2877.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.912 x 13.78 at -16.41 degrees (North through East) ! Clean map min=-0.014942 max=0.84522 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095410Jy sigma=0.000712 ! Fit after self-cal, rms=0.081782Jy sigma=0.000610 ! Inverting map and beam ! Estimated beam: bmin=3.914 mas, bmaj=13.78 mas, bpa=-16.42 degrees ! Estimated noise=2874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00223545 Jy ! Component: 100 - total flux cleaned = -0.00232466 Jy ! Component: 150 - total flux cleaned = -0.0024761 Jy ! Component: 200 - total flux cleaned = -0.00276451 Jy ! Total flux subtracted in 200 components = -0.00276451 Jy ! Clean residual min=-0.010511 max=0.008386 Jy/beam ! Clean residual mean=0.000019 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 0.953075 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 144 components and 0.953075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081602Jy sigma=0.000609 ! Fit after self-cal, rms=0.081596Jy sigma=0.000609 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232617 Jy ! Component: 100 - total flux cleaned = -0.000423731 Jy ! Component: 150 - total flux cleaned = -0.000486614 Jy ! Component: 200 - total flux cleaned = -0.000599077 Jy ! Total flux subtracted in 200 components = -0.000599077 Jy ! Clean residual min=-0.010432 max=0.008233 Jy/beam ! Clean residual mean=0.000019 rms=0.002357 Jy/beam ! Combined flux in latest and established models = 0.952475 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 149 components and 0.952475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081517Jy sigma=0.000608 ! Fit after self-cal, rms=0.081513Jy sigma=0.000608 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081513Jy sigma=0.000608 ! Fit after self-cal, rms=0.081624Jy sigma=0.000607 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.461 mas, bmaj=12.45 mas, bpa=-15.74 degrees ! Estimated noise=3382.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.662947 Jy ! Component: 100 - total flux cleaned = 0.820289 Jy ! Component: 150 - total flux cleaned = 0.877749 Jy ! Component: 200 - total flux cleaned = 0.907224 Jy ! Total flux subtracted in 200 components = 0.907224 Jy ! Clean residual min=-0.016996 max=0.016704 Jy/beam ! Clean residual mean=0.000005 rms=0.004582 Jy/beam ! Combined flux in latest and established models = 0.907224 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.907224 Jy ! Inverting map and beam ! Estimated beam: bmin=3.914 mas, bmaj=13.82 mas, bpa=-16.44 degrees ! Estimated noise=2874.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248498 Jy ! Component: 100 - total flux cleaned = 0.0362605 Jy ! Component: 150 - total flux cleaned = 0.0380969 Jy ! Component: 200 - total flux cleaned = 0.038146 Jy ! Total flux subtracted in 200 components = 0.038146 Jy ! Clean residual min=-0.011382 max=0.009401 Jy/beam ! Clean residual mean=0.000023 rms=0.002571 Jy/beam ! Combined flux in latest and established models = 0.94537 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 107 components and 0.94537 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.605 mas, bmaj=13.83 mas, bpa=-16.88 degrees ! Estimated noise=3301.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00704006 Jy ! Component: 100 - total flux cleaned = 0.00775992 Jy ! Component: 150 - total flux cleaned = 0.00794085 Jy ! Component: 200 - total flux cleaned = 0.00793978 Jy ! Total flux subtracted in 200 components = 0.00793978 Jy ! Clean residual min=-0.007985 max=0.007769 Jy/beam ! Clean residual mean=0.000033 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 0.953309 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124056 Jy ! Component: 100 - total flux cleaned = 0.000123698 Jy ! Component: 150 - total flux cleaned = 0.000231151 Jy ! Component: 200 - total flux cleaned = 0.00022985 Jy ! Total flux subtracted in 200 components = 0.00022985 Jy ! Clean residual min=-0.007654 max=0.007156 Jy/beam ! Clean residual mean=0.000032 rms=0.002023 Jy/beam ! Combined flux in latest and established models = 0.953539 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 146 components and 0.953539 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.914 mas, bmaj=13.82 mas, bpa=-16.44 degrees ! Estimated noise=2874.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299619 Jy ! Component: 100 - total flux cleaned = 3.31718e-05 Jy ! Component: 150 - total flux cleaned = 0.000194351 Jy ! Component: 200 - total flux cleaned = 7.80756e-05 Jy ! Total flux subtracted in 200 components = 7.80756e-05 Jy ! Clean residual min=-0.007419 max=0.007813 Jy/beam ! Clean residual mean=0.000017 rms=0.001953 Jy/beam ! Combined flux in latest and established models = 0.953617 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 170 components and 0.953617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080672Jy sigma=0.000596 ! Fit after self-cal, rms=0.080514Jy sigma=0.000595 wmodel J2320+0513_S_2017_10_09_pus_map.mod ! Writing 170 model components to file: J2320+0513_S_2017_10_09_pus_map.mod wobs J2320+0513_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2320+0513_S_2017_10_09_pus_uvs.fits wwins J2320+0513_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J2320+0513_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110399 Jy ! Component: 100 - total flux cleaned = 0.0019907 Jy ! Component: 150 - total flux cleaned = 0.00256516 Jy ! Component: 200 - total flux cleaned = 0.00309579 Jy ! Component: 250 - total flux cleaned = 0.00389364 Jy ! Component: 300 - total flux cleaned = 0.00465185 Jy ! Component: 350 - total flux cleaned = 0.00564064 Jy ! Component: 400 - total flux cleaned = 0.00649781 Jy ! Component: 450 - total flux cleaned = 0.00698904 Jy ! Component: 500 - total flux cleaned = 0.00769872 Jy ! Component: 550 - total flux cleaned = 0.00830786 Jy ! Component: 600 - total flux cleaned = 0.00919006 Jy ! Component: 650 - total flux cleaned = 0.00983012 Jy ! Component: 700 - total flux cleaned = 0.0106588 Jy ! Component: 750 - total flux cleaned = 0.0111293 Jy ! Component: 800 - total flux cleaned = 0.0114547 Jy ! Component: 850 - total flux cleaned = 0.0116453 Jy ! Component: 900 - total flux cleaned = 0.0118921 Jy ! Component: 950 - total flux cleaned = 0.0121933 Jy ! Component: 1000 - total flux cleaned = 0.0121922 Jy ! Component: 1050 - total flux cleaned = 0.0122497 Jy ! Component: 1100 - total flux cleaned = 0.0124186 Jy ! Component: 1150 - total flux cleaned = 0.0123644 Jy ! Component: 1200 - total flux cleaned = 0.0123659 Jy ! Component: 1250 - total flux cleaned = 0.0123134 Jy ! Component: 1300 - total flux cleaned = 0.0118988 Jy ! Component: 1350 - total flux cleaned = 0.0115919 Jy ! Component: 1400 - total flux cleaned = 0.0110886 Jy ! Component: 1450 - total flux cleaned = 0.0107412 Jy ! Component: 1500 - total flux cleaned = 0.0103506 Jy ! Component: 1550 - total flux cleaned = 0.0100613 Jy ! Component: 1600 - total flux cleaned = 0.00963336 Jy ! Component: 1650 - total flux cleaned = 0.00935146 Jy ! Component: 1700 - total flux cleaned = 0.00898068 Jy ! Component: 1750 - total flux cleaned = 0.00847749 Jy ! Component: 1800 - total flux cleaned = 0.00834178 Jy ! Component: 1850 - total flux cleaned = 0.00807394 Jy ! Component: 1900 - total flux cleaned = 0.00785242 Jy ! Component: 1950 - total flux cleaned = 0.00754687 Jy ! Component: 2000 - total flux cleaned = 0.00737411 Jy ! Component: 2050 - total flux cleaned = 0.00716048 Jy ! Component: 2100 - total flux cleaned = 0.00699186 Jy ! Component: 2150 - total flux cleaned = 0.0070337 Jy ! Component: 2200 - total flux cleaned = 0.00686737 Jy ! Component: 2250 - total flux cleaned = 0.00686763 Jy ! Component: 2300 - total flux cleaned = 0.006705 Jy ! Component: 2350 - total flux cleaned = 0.00670554 Jy ! Component: 2400 - total flux cleaned = 0.00678541 Jy ! Component: 2450 - total flux cleaned = 0.00666695 Jy ! Component: 2500 - total flux cleaned = 0.0065105 Jy ! Component: 2550 - total flux cleaned = 0.00654925 Jy ! Component: 2600 - total flux cleaned = 0.00631833 Jy ! Component: 2650 - total flux cleaned = 0.00620412 Jy ! Component: 2700 - total flux cleaned = 0.00612813 Jy ! Component: 2750 - total flux cleaned = 0.00590139 Jy ! Component: 2800 - total flux cleaned = 0.00586434 Jy ! Component: 2850 - total flux cleaned = 0.00578937 Jy ! Component: 2900 - total flux cleaned = 0.00567771 Jy ! Component: 2950 - total flux cleaned = 0.00545612 Jy ! Component: 3000 - total flux cleaned = 0.00534612 Jy ! Component: 3050 - total flux cleaned = 0.0052732 Jy ! Component: 3100 - total flux cleaned = 0.00523662 Jy ! Component: 3150 - total flux cleaned = 0.00501973 Jy ! Component: 3200 - total flux cleaned = 0.0048759 Jy ! Component: 3250 - total flux cleaned = 0.00480437 Jy ! Component: 3300 - total flux cleaned = 0.00466187 Jy ! Component: 3350 - total flux cleaned = 0.00452033 Jy ! Component: 3400 - total flux cleaned = 0.00441486 Jy ! Component: 3450 - total flux cleaned = 0.00434451 Jy ! Component: 3500 - total flux cleaned = 0.00416999 Jy ! Component: 3550 - total flux cleaned = 0.00396183 Jy ! Component: 3600 - total flux cleaned = 0.00389284 Jy ! Component: 3650 - total flux cleaned = 0.00361781 Jy ! Component: 3700 - total flux cleaned = 0.00354937 Jy ! Component: 3750 - total flux cleaned = 0.00341283 Jy ! Component: 3800 - total flux cleaned = 0.00324305 Jy ! Component: 3850 - total flux cleaned = 0.00317548 Jy ! Component: 3900 - total flux cleaned = 0.00304029 Jy ! Component: 3950 - total flux cleaned = 0.00293953 Jy ! Component: 4000 - total flux cleaned = 0.00273822 Jy ! Component: 4050 - total flux cleaned = 0.00263827 Jy ! Total flux subtracted in 4096 components = 0.00247184 Jy ! Clean residual min=-0.001956 max=0.001994 Jy/beam ! Clean residual mean=0.000004 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.956089 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 411 components and 0.956089 Jy ![Exited script file: muppet] wmap "J2320+0513_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.914 x 13.82 at -16.44 degrees (North through East) ! Clean map min=-0.007759 max=0.85598 Jy/beam ! Writing clean map to FITS file: J2320+0513_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.855985 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000564503 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.197843 0.197843 0.395687 0.791373 1.58275 3.16549 6.33098 12.662 25.3239 50.6479 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.855 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.914 x 13.82 at -16.44 degrees (North through East) ! Clean map min=-0.007759 max=0.85598 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2320+0513_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:23:00 2019