! Started logfile: J2320+0513_S_2017_04_28_pus_uvs.log on Thu May 2 16:35:18 2019 obs J2320+0513_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J2320+0513_S_2017_04_28_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.717284 visibilities/baseline/integration-bin. ! Found source: J2320+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 2324 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2320+0513_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.295252Jy sigma=0.032378 ! Fit after self-cal, rms=0.287884Jy sigma=0.032370 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.916 mas, bmaj=8.422 mas, bpa=-0.9219 degrees ! Estimated noise=1553.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.391444 Jy ! Component: 100 - total flux cleaned = 0.482852 Jy ! Total flux subtracted in 100 components = 0.482852 Jy ! Clean residual min=-0.172650 max=0.220345 Jy/beam ! Clean residual mean=-0.000963 rms=0.065023 Jy/beam ! Combined flux in latest and established models = 0.482852 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.482852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340829Jy sigma=0.015050 ! Fit after self-cal, rms=0.340783Jy sigma=0.015049 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.632 mas, bmaj=9.324 mas, bpa=3.476 degrees ! Estimated noise=1299.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0362499 Jy ! Component: 100 - total flux cleaned = -0.050188 Jy ! Component: 150 - total flux cleaned = -0.061296 Jy ! Component: 200 - total flux cleaned = -0.070251 Jy ! Total flux subtracted in 200 components = -0.070251 Jy ! Clean residual min=-0.155578 max=0.201152 Jy/beam ! Clean residual mean=-0.002113 rms=0.055750 Jy/beam ! Combined flux in latest and established models = 0.412601 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.412601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316622Jy sigma=0.014535 ! Fit after self-cal, rms=0.316517Jy sigma=0.014535 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.74 HN 0.81 KP 0.74 ! LA 0.77 MK 1.01 NL 0.70 OV 0.77 ! PT 0.77 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.68 HN 0.85 KP 0.70 ! LA 0.75 MK 1.05 NL 0.89 OV 0.79 ! PT 0.75 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.71 HN 0.83 KP 0.73 ! LA 0.75 MK 1.07 NL 0.82 OV 0.72 ! PT 0.74 SC 1.08 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.72 HN 0.83 KP 1.00* ! LA 28.22 MK 1.68 NL 1.00* OV 1.00* ! PT 0.78 SC 1.00* ! ! ! Fit before self-cal, rms=0.316517Jy sigma=0.014535 ! Fit after self-cal, rms=2.560140Jy sigma=0.000967 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.37 mas, bmaj=8.879 mas, bpa=4.269 degrees ! Estimated noise=1288.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017799 Jy ! Component: 100 - total flux cleaned = 0.0275436 Jy ! Component: 150 - total flux cleaned = 0.0298921 Jy ! Component: 200 - total flux cleaned = 0.0313229 Jy ! Total flux subtracted in 200 components = 0.0313229 Jy ! Clean residual min=-0.009936 max=0.013529 Jy/beam ! Clean residual mean=-0.000032 rms=0.002636 Jy/beam ! Combined flux in latest and established models = 0.443924 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.443924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.559058Jy sigma=0.000919 ! Fit after self-cal, rms=2.559315Jy sigma=0.000902 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.559315Jy sigma=0.000902 ! Fit after self-cal, rms=0.082876Jy sigma=0.000755 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.327 mas, bmaj=8.796 mas, bpa=4.188 degrees ! Estimated noise=1286.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00988769 Jy ! Component: 100 - total flux cleaned = 0.0125279 Jy ! Component: 150 - total flux cleaned = 0.0125229 Jy ! Component: 200 - total flux cleaned = 0.012528 Jy ! Total flux subtracted in 200 components = 0.012528 Jy ! Clean residual min=-0.006401 max=0.007083 Jy/beam ! Clean residual mean=0.000004 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.456452 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.456452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080615Jy sigma=0.000733 ! Fit after self-cal, rms=0.080515Jy sigma=0.000733 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019448 Jy ! Component: 100 - total flux cleaned = -0.000199383 Jy ! Component: 150 - total flux cleaned = -0.000204831 Jy ! Component: 200 - total flux cleaned = 0.000110365 Jy ! Total flux subtracted in 200 components = 0.000110365 Jy ! Clean residual min=-0.006148 max=0.006383 Jy/beam ! Clean residual mean=0.000004 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.456563 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 0.456563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079481Jy sigma=0.000726 ! Fit after self-cal, rms=0.079489Jy sigma=0.000726 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079489Jy sigma=0.000726 ! Fit after self-cal, rms=0.077080Jy sigma=0.000719 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.291 mas, bmaj=8.734 mas, bpa=4.283 degrees ! Estimated noise=1288.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724717 Jy ! Component: 100 - total flux cleaned = 0.00916435 Jy ! Component: 150 - total flux cleaned = 0.00930891 Jy ! Component: 200 - total flux cleaned = 0.009306 Jy ! Total flux subtracted in 200 components = 0.009306 Jy ! Clean residual min=-0.005517 max=0.005531 Jy/beam ! Clean residual mean=0.000009 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.465869 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.465869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075878Jy sigma=0.000708 ! Fit after self-cal, rms=0.075876Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000267442 Jy ! Component: 100 - total flux cleaned = -0.000390333 Jy ! Component: 150 - total flux cleaned = -0.000388489 Jy ! Component: 200 - total flux cleaned = -0.000496246 Jy ! Total flux subtracted in 200 components = -0.000496246 Jy ! Clean residual min=-0.005304 max=0.005294 Jy/beam ! Clean residual mean=0.000009 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.465373 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 64 components and 0.465373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075354Jy sigma=0.000704 ! Fit after self-cal, rms=0.075359Jy sigma=0.000704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075359Jy sigma=0.000704 ! Fit after self-cal, rms=0.073954Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.863 mas, bmaj=12.15 mas, bpa=7.792 degrees ! Estimated noise=1419.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392954 Jy ! Component: 100 - total flux cleaned = 0.00498478 Jy ! Component: 150 - total flux cleaned = 0.0049908 Jy ! Component: 200 - total flux cleaned = 0.00494312 Jy ! Total flux subtracted in 200 components = 0.00494312 Jy ! Clean residual min=-0.004442 max=0.004364 Jy/beam ! Clean residual mean=0.000020 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.470316 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.470316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073549Jy sigma=0.000696 ! Fit after self-cal, rms=0.073541Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.42781e-05 Jy ! Component: 100 - total flux cleaned = -0.000174244 Jy ! Component: 150 - total flux cleaned = -0.00017376 Jy ! Component: 200 - total flux cleaned = -0.000210832 Jy ! Total flux subtracted in 200 components = -0.000210832 Jy ! Clean residual min=-0.004341 max=0.004277 Jy/beam ! Clean residual mean=0.000020 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.470105 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.470105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073463Jy sigma=0.000695 ! Fit after self-cal, rms=0.073466Jy sigma=0.000695 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.262 mas, bmaj=8.688 mas, bpa=4.358 degrees ! Estimated noise=1289.82 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.262 x 8.688 at 4.358 degrees (North through East) ! Clean map min=-0.0050775 max=0.50022 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073466Jy sigma=0.000695 ! Fit after self-cal, rms=0.069829Jy sigma=0.000644 ! Inverting map and beam ! Estimated beam: bmin=4.245 mas, bmaj=8.662 mas, bpa=4.366 degrees ! Estimated noise=1292.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043969 Jy ! Component: 100 - total flux cleaned = 0.00566 Jy ! Component: 150 - total flux cleaned = 0.00575519 Jy ! Component: 200 - total flux cleaned = 0.00584059 Jy ! Total flux subtracted in 200 components = 0.00584059 Jy ! Clean residual min=-0.004239 max=0.004636 Jy/beam ! Clean residual mean=0.000013 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.475945 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.475945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069307Jy sigma=0.000639 ! Fit after self-cal, rms=0.069316Jy sigma=0.000639 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.17767e-06 Jy ! Component: 100 - total flux cleaned = -7.62394e-05 Jy ! Component: 150 - total flux cleaned = -7.49937e-05 Jy ! Component: 200 - total flux cleaned = -0.000141597 Jy ! Total flux subtracted in 200 components = -0.000141597 Jy ! Clean residual min=-0.004211 max=0.004409 Jy/beam ! Clean residual mean=0.000013 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.475804 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 94 components and 0.475804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069116Jy sigma=0.000638 ! Fit after self-cal, rms=0.069121Jy sigma=0.000638 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069121Jy sigma=0.000638 ! Fit after self-cal, rms=0.068596Jy sigma=0.000636 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=7.974 mas, bpa=0.6643 degrees ! Estimated noise=1568.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.395092 Jy ! Component: 100 - total flux cleaned = 0.481248 Jy ! Component: 150 - total flux cleaned = 0.48261 Jy ! Component: 200 - total flux cleaned = 0.479244 Jy ! Total flux subtracted in 200 components = 0.479244 Jy ! Clean residual min=-0.010868 max=0.009852 Jy/beam ! Clean residual mean=0.000004 rms=0.002165 Jy/beam ! Combined flux in latest and established models = 0.479244 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.479244 Jy ! Inverting map and beam ! Estimated beam: bmin=4.227 mas, bmaj=8.635 mas, bpa=4.425 degrees ! Estimated noise=1294.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00216646 Jy ! Component: 100 - total flux cleaned = -0.0014697 Jy ! Component: 150 - total flux cleaned = -0.00179387 Jy ! Component: 200 - total flux cleaned = -0.00206443 Jy ! Total flux subtracted in 200 components = -0.00206443 Jy ! Clean residual min=-0.007564 max=0.006686 Jy/beam ! Clean residual mean=0.000014 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.477179 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.477179 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.828 mas, bmaj=12.11 mas, bpa=7.931 degrees ! Estimated noise=1435.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803417 Jy ! Component: 100 - total flux cleaned = 0.000580359 Jy ! Component: 150 - total flux cleaned = 0.000579565 Jy ! Component: 200 - total flux cleaned = 0.000505715 Jy ! Total flux subtracted in 200 components = 0.000505715 Jy ! Clean residual min=-0.003515 max=0.004347 Jy/beam ! Clean residual mean=0.000026 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.477685 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.43403e-06 Jy ! Component: 100 - total flux cleaned = -5.76893e-05 Jy ! Component: 150 - total flux cleaned = -0.000225107 Jy ! Component: 200 - total flux cleaned = -0.000330645 Jy ! Total flux subtracted in 200 components = -0.000330645 Jy ! Clean residual min=-0.003534 max=0.004043 Jy/beam ! Clean residual mean=0.000026 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.477354 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 55 components and 0.477354 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.227 mas, bmaj=8.635 mas, bpa=4.425 degrees ! Estimated noise=1294.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101794 Jy ! Component: 100 - total flux cleaned = 0.00155897 Jy ! Component: 150 - total flux cleaned = 0.0010749 Jy ! Component: 200 - total flux cleaned = 0.000775864 Jy ! Total flux subtracted in 200 components = 0.000775864 Jy ! Clean residual min=-0.005663 max=0.005363 Jy/beam ! Clean residual mean=0.000014 rms=0.001250 Jy/beam ! Combined flux in latest and established models = 0.47813 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 71 components and 0.47813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070100Jy sigma=0.000649 ! Fit after self-cal, rms=0.070077Jy sigma=0.000648 wmodel J2320+0513_S_2017_04_28_pus_map.mod ! Writing 71 model components to file: J2320+0513_S_2017_04_28_pus_map.mod wobs J2320+0513_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J2320+0513_S_2017_04_28_pus_uvs.fits wwins J2320+0513_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J2320+0513_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000318789 Jy ! Component: 100 - total flux cleaned = -0.000494178 Jy ! Component: 150 - total flux cleaned = -0.000409059 Jy ! Component: 200 - total flux cleaned = -0.000407757 Jy ! Component: 250 - total flux cleaned = -0.000333184 Jy ! Component: 300 - total flux cleaned = -0.00026167 Jy ! Component: 350 - total flux cleaned = -0.000604185 Jy ! Component: 400 - total flux cleaned = -0.000669049 Jy ! Component: 450 - total flux cleaned = -0.000990625 Jy ! Component: 500 - total flux cleaned = -0.00117932 Jy ! Component: 550 - total flux cleaned = -0.00148648 Jy ! Component: 600 - total flux cleaned = -0.00190608 Jy ! Component: 650 - total flux cleaned = -0.0021384 Jy ! Component: 700 - total flux cleaned = -0.00253784 Jy ! Component: 750 - total flux cleaned = -0.00270548 Jy ! Component: 800 - total flux cleaned = -0.0028703 Jy ! Component: 850 - total flux cleaned = -0.00319235 Jy ! Component: 900 - total flux cleaned = -0.00335004 Jy ! Component: 950 - total flux cleaned = -0.00371083 Jy ! Component: 1000 - total flux cleaned = -0.00391298 Jy ! Component: 1050 - total flux cleaned = -0.00425956 Jy ! Component: 1100 - total flux cleaned = -0.00435663 Jy ! Component: 1150 - total flux cleaned = -0.00459555 Jy ! Component: 1200 - total flux cleaned = -0.00473668 Jy ! Component: 1250 - total flux cleaned = -0.00501461 Jy ! Component: 1300 - total flux cleaned = -0.0052414 Jy ! Component: 1350 - total flux cleaned = -0.00541985 Jy ! Component: 1400 - total flux cleaned = -0.00568354 Jy ! Component: 1450 - total flux cleaned = -0.00594247 Jy ! Component: 1500 - total flux cleaned = -0.006155 Jy ! Component: 1550 - total flux cleaned = -0.00640607 Jy ! Component: 1600 - total flux cleaned = -0.00669422 Jy ! Component: 1650 - total flux cleaned = -0.00685576 Jy ! Component: 1700 - total flux cleaned = -0.00701637 Jy ! Component: 1750 - total flux cleaned = -0.00721388 Jy ! Component: 1800 - total flux cleaned = -0.00736842 Jy ! Component: 1850 - total flux cleaned = -0.00752203 Jy ! Component: 1900 - total flux cleaned = -0.00771071 Jy ! Component: 1950 - total flux cleaned = -0.00778488 Jy ! Component: 2000 - total flux cleaned = -0.00793227 Jy ! Component: 2050 - total flux cleaned = -0.00818757 Jy ! Component: 2100 - total flux cleaned = -0.00843921 Jy ! Component: 2150 - total flux cleaned = -0.00865219 Jy ! Component: 2200 - total flux cleaned = -0.00886316 Jy ! Component: 2250 - total flux cleaned = -0.00903669 Jy ! Component: 2300 - total flux cleaned = -0.00934507 Jy ! Component: 2350 - total flux cleaned = -0.00964899 Jy ! Component: 2400 - total flux cleaned = -0.00981603 Jy ! Component: 2450 - total flux cleaned = -0.0100805 Jy ! Component: 2500 - total flux cleaned = -0.0102439 Jy ! Component: 2550 - total flux cleaned = -0.010535 Jy ! Component: 2600 - total flux cleaned = -0.0107586 Jy ! Component: 2650 - total flux cleaned = -0.0109482 Jy ! Component: 2700 - total flux cleaned = -0.0111349 Jy ! Component: 2750 - total flux cleaned = -0.0113201 Jy ! Component: 2800 - total flux cleaned = -0.0114115 Jy ! Component: 2850 - total flux cleaned = -0.0114721 Jy ! Component: 2900 - total flux cleaned = -0.0115918 Jy ! Component: 2950 - total flux cleaned = -0.0118285 Jy ! Component: 3000 - total flux cleaned = -0.0120038 Jy ! Component: 3050 - total flux cleaned = -0.0121198 Jy ! Component: 3100 - total flux cleaned = -0.0124354 Jy ! Component: 3150 - total flux cleaned = -0.0124637 Jy ! Component: 3200 - total flux cleaned = -0.0126606 Jy ! Component: 3250 - total flux cleaned = -0.0128279 Jy ! Component: 3300 - total flux cleaned = -0.0131592 Jy ! Component: 3350 - total flux cleaned = -0.0132959 Jy ! Component: 3400 - total flux cleaned = -0.0135128 Jy ! Component: 3450 - total flux cleaned = -0.0137275 Jy ! Component: 3500 - total flux cleaned = -0.0139937 Jy ! Component: 3550 - total flux cleaned = -0.0141253 Jy ! Component: 3600 - total flux cleaned = -0.0142561 Jy ! Component: 3650 - total flux cleaned = -0.0144896 Jy ! Component: 3700 - total flux cleaned = -0.0147465 Jy ! Component: 3750 - total flux cleaned = -0.0148993 Jy ! Component: 3800 - total flux cleaned = -0.0151269 Jy ! Component: 3850 - total flux cleaned = -0.015202 Jy ! Component: 3900 - total flux cleaned = -0.0153015 Jy ! Component: 3950 - total flux cleaned = -0.0154991 Jy ! Component: 4000 - total flux cleaned = -0.015646 Jy ! Component: 4050 - total flux cleaned = -0.0157915 Jy ! Total flux subtracted in 4096 components = -0.0158637 Jy ! Clean residual min=-0.001251 max=0.001229 Jy/beam ! Clean residual mean=0.000002 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.462266 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 308 components and 0.462266 Jy ![Exited script file: muppet] wmap "J2320+0513_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.227 x 8.635 at 4.425 degrees (North through East) ! Clean map min=-0.0044345 max=0.50271 Jy/beam ! Writing clean map to FITS file: J2320+0513_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.502714 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000432236 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.257942 0.257942 0.515883 1.03177 2.06353 4.12707 8.25413 16.5083 33.0165 66.0331 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.502 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.227 x 8.635 at 4.425 degrees (North through East) ! Clean map min=-0.0044345 max=0.50271 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2320+0513_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:35:23 2019