! Started logfile: J2320+0513_S_2017_02_24_pus_uvs.log on Sat May 4 11:38:07 2019 obs J2320+0513_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2320+0513_S_2017_02_24_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.884722 visibilities/baseline/integration-bin. ! Found source: J2320+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 2548 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2320+0513_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.354362Jy sigma=0.050104 ! Fit after self-cal, rms=0.344558Jy sigma=0.050089 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=8.226 mas, bpa=-6.494 degrees ! Estimated noise=858.029 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222929 Jy ! Component: 100 - total flux cleaned = 0.30909 Jy ! Total flux subtracted in 100 components = 0.30909 Jy ! Clean residual min=-0.099750 max=0.136129 Jy/beam ! Clean residual mean=0.000074 rms=0.031377 Jy/beam ! Combined flux in latest and established models = 0.30909 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.30909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518208Jy sigma=0.011793 ! Fit after self-cal, rms=0.518154Jy sigma=0.011793 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=8.692 mas, bpa=-5.089 degrees ! Estimated noise=812.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0369608 Jy ! Component: 100 - total flux cleaned = 0.0262499 Jy ! Component: 150 - total flux cleaned = 0.0216839 Jy ! Component: 200 - total flux cleaned = 0.0203245 Jy ! Total flux subtracted in 200 components = 0.0203245 Jy ! Clean residual min=-0.096962 max=0.157435 Jy/beam ! Clean residual mean=0.000053 rms=0.034830 Jy/beam ! Combined flux in latest and established models = 0.329414 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.329414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.454147Jy sigma=0.013930 ! Fit after self-cal, rms=0.454118Jy sigma=0.013930 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.45 FD 0.58 HN 0.82 KP 0.65 ! LA 0.64 MK 0.83 NL 0.72 OV 0.69 ! PT 0.67 SC 0.73 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.47 FD 0.53 HN 0.83 KP 0.62 ! LA 0.60 MK 0.81 NL 0.70 OV 0.72 ! PT 0.65 SC 0.79 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.49 FD 13.99 HN 0.80 KP 0.68 ! LA 0.67 MK 0.85 NL 0.79 OV 0.65 ! PT 0.64 SC 0.78 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.48 FD 21.72 HN 0.78 KP 1.00* ! LA 0.55 MK 1.27 NL 1.00* OV 0.65 ! PT 0.65 SC 1.00* ! ! ! Fit before self-cal, rms=0.454118Jy sigma=0.013930 ! Fit after self-cal, rms=2.224406Jy sigma=0.001778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=7.798 mas, bpa=-2.315 degrees ! Estimated noise=863.804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236811 Jy ! Component: 100 - total flux cleaned = 0.0273174 Jy ! Component: 150 - total flux cleaned = 0.0295936 Jy ! Component: 200 - total flux cleaned = 0.0315274 Jy ! Total flux subtracted in 200 components = 0.0315274 Jy ! Clean residual min=-0.018323 max=0.015464 Jy/beam ! Clean residual mean=0.000071 rms=0.004376 Jy/beam ! Combined flux in latest and established models = 0.360942 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 0.360942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.219352Jy sigma=0.001709 ! Fit after self-cal, rms=2.219380Jy sigma=0.001691 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.219380Jy sigma=0.001691 ! Fit after self-cal, rms=0.055080Jy sigma=0.000881 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=7.807 mas, bpa=-2.958 degrees ! Estimated noise=857.156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020964 Jy ! Component: 100 - total flux cleaned = -0.0024245 Jy ! Component: 150 - total flux cleaned = -0.00294382 Jy ! Component: 200 - total flux cleaned = -0.00316548 Jy ! Total flux subtracted in 200 components = -0.00316548 Jy ! Clean residual min=-0.008339 max=0.006903 Jy/beam ! Clean residual mean=0.000025 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.357776 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.357776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051499Jy sigma=0.000820 ! Fit after self-cal, rms=0.051378Jy sigma=0.000818 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000174131 Jy ! Component: 100 - total flux cleaned = 2.02677e-06 Jy ! Component: 150 - total flux cleaned = 2.06953e-06 Jy ! Component: 200 - total flux cleaned = -3.28851e-07 Jy ! Total flux subtracted in 200 components = -3.28851e-07 Jy ! Clean residual min=-0.007948 max=0.006679 Jy/beam ! Clean residual mean=0.000025 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.357776 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.357776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050187Jy sigma=0.000802 ! Fit after self-cal, rms=0.050177Jy sigma=0.000802 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050177Jy sigma=0.000802 ! Fit after self-cal, rms=0.048354Jy sigma=0.000784 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=7.8 mas, bpa=-3.276 degrees ! Estimated noise=858.377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123944 Jy ! Component: 100 - total flux cleaned = -0.00110029 Jy ! Component: 150 - total flux cleaned = -0.000387723 Jy ! Component: 200 - total flux cleaned = -0.000268062 Jy ! Total flux subtracted in 200 components = -0.000268062 Jy ! Clean residual min=-0.006759 max=0.005644 Jy/beam ! Clean residual mean=0.000019 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.357508 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 0.357508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046837Jy sigma=0.000759 ! Fit after self-cal, rms=0.046822Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147348 Jy ! Component: 100 - total flux cleaned = 0.000251862 Jy ! Component: 150 - total flux cleaned = 0.000247424 Jy ! Component: 200 - total flux cleaned = 0.00024447 Jy ! Total flux subtracted in 200 components = 0.00024447 Jy ! Clean residual min=-0.006550 max=0.005535 Jy/beam ! Clean residual mean=0.000019 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.357752 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 70 components and 0.357752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046386Jy sigma=0.000752 ! Fit after self-cal, rms=0.046386Jy sigma=0.000752 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046386Jy sigma=0.000752 ! Fit after self-cal, rms=0.045399Jy sigma=0.000742 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.784 mas, bmaj=11.79 mas, bpa=10.26 degrees ! Estimated noise=1018.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000444221 Jy ! Component: 100 - total flux cleaned = 0.000147336 Jy ! Component: 150 - total flux cleaned = -7.15517e-05 Jy ! Component: 200 - total flux cleaned = -0.000292569 Jy ! Total flux subtracted in 200 components = -0.000292569 Jy ! Clean residual min=-0.004664 max=0.005218 Jy/beam ! Clean residual mean=0.000027 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.35746 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.35746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044952Jy sigma=0.000733 ! Fit after self-cal, rms=0.044933Jy sigma=0.000733 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188485 Jy ! Component: 100 - total flux cleaned = -0.000317749 Jy ! Component: 150 - total flux cleaned = -0.000496961 Jy ! Component: 200 - total flux cleaned = -0.000588243 Jy ! Total flux subtracted in 200 components = -0.000588243 Jy ! Clean residual min=-0.004658 max=0.005155 Jy/beam ! Clean residual mean=0.000027 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.356871 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 89 components and 0.356871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044818Jy sigma=0.000731 ! Fit after self-cal, rms=0.044816Jy sigma=0.000731 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.468 mas, bmaj=7.793 mas, bpa=-3.482 degrees ! Estimated noise=859.293 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.468 x 7.793 at -3.482 degrees (North through East) ! Clean map min=-0.0060763 max=0.33651 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.213 mas, bpa=-4.484 degrees ! Estimated noise=1052.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.271996 Jy ! Component: 100 - total flux cleaned = 0.333097 Jy ! Component: 150 - total flux cleaned = 0.356848 Jy ! Component: 200 - total flux cleaned = 0.358559 Jy ! Total flux subtracted in 200 components = 0.358559 Jy ! Clean residual min=-0.007522 max=0.010740 Jy/beam ! Clean residual mean=0.000008 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.358559 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.358559 Jy ! Inverting map and beam ! Estimated beam: bmin=3.468 mas, bmaj=7.793 mas, bpa=-3.482 degrees ! Estimated noise=859.293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283966 Jy ! Component: 100 - total flux cleaned = 0.00313478 Jy ! Component: 150 - total flux cleaned = 0.00312906 Jy ! Component: 200 - total flux cleaned = 0.00290624 Jy ! Total flux subtracted in 200 components = 0.00290624 Jy ! Clean residual min=-0.005373 max=0.005774 Jy/beam ! Clean residual mean=0.000018 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.361465 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 31 components and 0.361465 Jy ! Inverting map ! Added new window around map position (-15.5, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026283 Jy ! Component: 100 - total flux cleaned = 0.00262647 Jy ! Component: 150 - total flux cleaned = 0.00229761 Jy ! Component: 200 - total flux cleaned = 0.00200566 Jy ! Total flux subtracted in 200 components = 0.00200566 Jy ! Clean residual min=-0.004780 max=0.004757 Jy/beam ! Clean residual mean=0.000020 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.363471 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 46 components and 0.363471 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.784 mas, bmaj=11.79 mas, bpa=10.26 degrees ! Estimated noise=1018.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00248018 Jy ! Component: 100 - total flux cleaned = -0.00330353 Jy ! Component: 150 - total flux cleaned = -0.00364493 Jy ! Component: 200 - total flux cleaned = -0.00394442 Jy ! Total flux subtracted in 200 components = -0.00394442 Jy ! Clean residual min=-0.004677 max=0.004332 Jy/beam ! Clean residual mean=0.000031 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.359526 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000332093 Jy ! Component: 100 - total flux cleaned = -0.000449672 Jy ! Component: 150 - total flux cleaned = -0.000663564 Jy ! Component: 200 - total flux cleaned = -0.000713198 Jy ! Total flux subtracted in 200 components = -0.000713198 Jy ! Clean residual min=-0.004677 max=0.004316 Jy/beam ! Clean residual mean=0.000029 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.358813 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 86 components and 0.358813 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.468 mas, bmaj=7.793 mas, bpa=-3.482 degrees ! Estimated noise=859.293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159033 Jy ! Component: 100 - total flux cleaned = 0.00147774 Jy ! Component: 150 - total flux cleaned = 0.00167757 Jy ! Component: 200 - total flux cleaned = 0.00186245 Jy ! Total flux subtracted in 200 components = 0.00186245 Jy ! Clean residual min=-0.004531 max=0.004138 Jy/beam ! Clean residual mean=0.000017 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.360675 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.360675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043799Jy sigma=0.000713 ! Fit after self-cal, rms=0.043703Jy sigma=0.000711 wmodel J2320+0513_S_2017_02_24_pus_map.mod ! Writing 102 model components to file: J2320+0513_S_2017_02_24_pus_map.mod wobs J2320+0513_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2320+0513_S_2017_02_24_pus_uvs.fits wwins J2320+0513_S_2017_02_24_pus_map.win ! wwins: Wrote 4 windows to J2320+0513_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464966 Jy ! Component: 100 - total flux cleaned = -0.00110355 Jy ! Component: 150 - total flux cleaned = -0.00143531 Jy ! Component: 200 - total flux cleaned = -0.00194204 Jy ! Component: 250 - total flux cleaned = -0.00200439 Jy ! Component: 300 - total flux cleaned = -0.00194673 Jy ! Component: 350 - total flux cleaned = -0.00189018 Jy ! Component: 400 - total flux cleaned = -0.00166972 Jy ! Component: 450 - total flux cleaned = -0.00145669 Jy ! Component: 500 - total flux cleaned = -0.00119772 Jy ! Component: 550 - total flux cleaned = -0.00109805 Jy ! Component: 600 - total flux cleaned = -0.000998382 Jy ! Component: 650 - total flux cleaned = -0.000806962 Jy ! Component: 700 - total flux cleaned = -0.000856313 Jy ! Component: 750 - total flux cleaned = -0.00071714 Jy ! Component: 800 - total flux cleaned = -0.000626813 Jy ! Component: 850 - total flux cleaned = -0.000449498 Jy ! Component: 900 - total flux cleaned = -0.000362775 Jy ! Component: 950 - total flux cleaned = -0.000191359 Jy ! Component: 1000 - total flux cleaned = 6.11848e-05 Jy ! Component: 1050 - total flux cleaned = 0.000266946 Jy ! Component: 1100 - total flux cleaned = 0.00054967 Jy ! Component: 1150 - total flux cleaned = 0.000707238 Jy ! Component: 1200 - total flux cleaned = 0.000862365 Jy ! Component: 1250 - total flux cleaned = 0.00105376 Jy ! Component: 1300 - total flux cleaned = 0.00112898 Jy ! Component: 1350 - total flux cleaned = 0.00124056 Jy ! Component: 1400 - total flux cleaned = 0.00145943 Jy ! Component: 1450 - total flux cleaned = 0.00167456 Jy ! Component: 1500 - total flux cleaned = 0.00181492 Jy ! Component: 1550 - total flux cleaned = 0.00202401 Jy ! Component: 1600 - total flux cleaned = 0.00219518 Jy ! Component: 1650 - total flux cleaned = 0.0023972 Jy ! Component: 1700 - total flux cleaned = 0.00253115 Jy ! Component: 1750 - total flux cleaned = 0.00272832 Jy ! Component: 1800 - total flux cleaned = 0.00292141 Jy ! Component: 1850 - total flux cleaned = 0.00301671 Jy ! Component: 1900 - total flux cleaned = 0.00317355 Jy ! Component: 1950 - total flux cleaned = 0.00323451 Jy ! Component: 2000 - total flux cleaned = 0.00332664 Jy ! Component: 2050 - total flux cleaned = 0.00350753 Jy ! Component: 2100 - total flux cleaned = 0.00362645 Jy ! Component: 2150 - total flux cleaned = 0.00380209 Jy ! Component: 2200 - total flux cleaned = 0.00385912 Jy ! Component: 2250 - total flux cleaned = 0.00397318 Jy ! Component: 2300 - total flux cleaned = 0.00411338 Jy ! Component: 2350 - total flux cleaned = 0.00405801 Jy ! Component: 2400 - total flux cleaned = 0.00413976 Jy ! Component: 2450 - total flux cleaned = 0.00416663 Jy ! Component: 2500 - total flux cleaned = 0.00424711 Jy ! Component: 2550 - total flux cleaned = 0.00432638 Jy ! Component: 2600 - total flux cleaned = 0.00435184 Jy ! Component: 2650 - total flux cleaned = 0.00435247 Jy ! Component: 2700 - total flux cleaned = 0.00435329 Jy ! Component: 2750 - total flux cleaned = 0.00448048 Jy ! Component: 2800 - total flux cleaned = 0.00468087 Jy ! Component: 2850 - total flux cleaned = 0.00470536 Jy ! Component: 2900 - total flux cleaned = 0.00477852 Jy ! Component: 2950 - total flux cleaned = 0.00489903 Jy ! Component: 3000 - total flux cleaned = 0.00492242 Jy ! Component: 3050 - total flux cleaned = 0.00489883 Jy ! Component: 3100 - total flux cleaned = 0.00496872 Jy ! Component: 3150 - total flux cleaned = 0.00499203 Jy ! Component: 3200 - total flux cleaned = 0.00496928 Jy ! Component: 3250 - total flux cleaned = 0.00494669 Jy ! Component: 3300 - total flux cleaned = 0.00505855 Jy ! Component: 3350 - total flux cleaned = 0.00499188 Jy ! Component: 3400 - total flux cleaned = 0.00501386 Jy ! Component: 3450 - total flux cleaned = 0.00505689 Jy ! Component: 3500 - total flux cleaned = 0.00505668 Jy ! Component: 3550 - total flux cleaned = 0.00509922 Jy ! Component: 3600 - total flux cleaned = 0.00505679 Jy ! Component: 3650 - total flux cleaned = 0.00505665 Jy ! Component: 3700 - total flux cleaned = 0.00505639 Jy ! Component: 3750 - total flux cleaned = 0.00503583 Jy ! Component: 3800 - total flux cleaned = 0.0049754 Jy ! Component: 3850 - total flux cleaned = 0.00497571 Jy ! Component: 3900 - total flux cleaned = 0.00509474 Jy ! Component: 3950 - total flux cleaned = 0.00495674 Jy ! Component: 4000 - total flux cleaned = 0.00507363 Jy ! Component: 4050 - total flux cleaned = 0.00511225 Jy ! Total flux subtracted in 4096 components = 0.00503572 Jy ! Clean residual min=-0.001256 max=0.000959 Jy/beam ! Clean residual mean=0.000004 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.365711 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 366 components and 0.365711 Jy ![Exited script file: muppet] wmap "J2320+0513_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.468 x 7.793 at -3.482 degrees (North through East) ! Clean map min=-0.0048287 max=0.33687 Jy/beam ! Writing clean map to FITS file: J2320+0513_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.336871 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000350355 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.312008 0.312008 0.624016 1.24803 2.49607 4.99213 9.98426 19.9685 39.937 79.8741 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.336 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.468 x 7.793 at -3.482 degrees (North through East) ! Clean map min=-0.0048287 max=0.33687 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2320+0513_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:38:11 2019