! Started logfile: J2320+0513_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:26:04 2019 obs J2320+0513_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2320+0513_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.202778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2320+0513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2320+0513_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.524573Jy sigma=0.003275 ! Fit after self-cal, rms=0.513308Jy sigma=0.003204 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.392 mas, bmaj=14.85 mas, bpa=17.87 degrees ! Estimated noise=7844.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.424216 Jy ! Component: 100 - total flux cleaned = 0.542883 Jy ! Total flux subtracted in 100 components = 0.542883 Jy ! Clean residual min=-0.041577 max=0.048470 Jy/beam ! Clean residual mean=0.000071 rms=0.018844 Jy/beam ! Combined flux in latest and established models = 0.542883 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.542883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129136Jy sigma=0.000861 ! Fit after self-cal, rms=0.129248Jy sigma=0.000860 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.412 mas, bmaj=15.87 mas, bpa=21.31 degrees ! Estimated noise=6655.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0574173 Jy ! Component: 100 - total flux cleaned = 0.0851645 Jy ! Component: 150 - total flux cleaned = 0.0942145 Jy ! Component: 200 - total flux cleaned = 0.0981489 Jy ! Total flux subtracted in 200 components = 0.0981489 Jy ! Clean residual min=-0.011954 max=0.012234 Jy/beam ! Clean residual mean=0.000125 rms=0.004467 Jy/beam ! Combined flux in latest and established models = 0.641032 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 84 components and 0.641032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102265Jy sigma=0.000642 ! Fit after self-cal, rms=0.102110Jy sigma=0.000639 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00* KP 1.00* ! LA 1.05 MK 1.00* NL 0.89 OV 1.00 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00* KP 1.00* ! LA 0.98 MK 1.00* NL 1.01 OV 1.04 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.00* KP 1.00* ! LA 0.95 MK 1.00* NL 1.02 OV 0.95 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.00* KP 1.00* ! LA 0.98 MK 1.00* NL 1.00* OV 0.97 ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.102110Jy sigma=0.000639 ! Fit after self-cal, rms=0.097356Jy sigma=0.000605 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.311 mas, bmaj=15.9 mas, bpa=21.19 degrees ! Estimated noise=6680.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149217 Jy ! Component: 100 - total flux cleaned = 0.000650978 Jy ! Component: 150 - total flux cleaned = 9.01273e-05 Jy ! Component: 200 - total flux cleaned = 8.06972e-05 Jy ! Total flux subtracted in 200 components = 8.06972e-05 Jy ! Clean residual min=-0.002420 max=0.002416 Jy/beam ! Clean residual mean=0.000015 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.641113 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 139 components and 0.641113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096539Jy sigma=0.000599 ! Fit after self-cal, rms=0.096573Jy sigma=0.000599 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096573Jy sigma=0.000599 ! Fit after self-cal, rms=0.096513Jy sigma=0.000599 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.312 mas, bmaj=15.9 mas, bpa=21.2 degrees ! Estimated noise=6678.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.08579e-05 Jy ! Component: 100 - total flux cleaned = 0.000360044 Jy ! Component: 150 - total flux cleaned = 0.000875978 Jy ! Component: 200 - total flux cleaned = 0.00156814 Jy ! Total flux subtracted in 200 components = 0.00156814 Jy ! Clean residual min=-0.001637 max=0.001606 Jy/beam ! Clean residual mean=0.000002 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.642681 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 176 components and 0.642681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096305Jy sigma=0.000597 ! Fit after self-cal, rms=0.096305Jy sigma=0.000597 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332922 Jy ! Component: 100 - total flux cleaned = 0.00115097 Jy ! Component: 150 - total flux cleaned = 0.00210376 Jy ! Component: 200 - total flux cleaned = 0.00288151 Jy ! Total flux subtracted in 200 components = 0.00288151 Jy ! Clean residual min=-0.001265 max=0.001278 Jy/beam ! Clean residual mean=-0.000000 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.645562 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 204 components and 0.645562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096191Jy sigma=0.000596 ! Fit after self-cal, rms=0.096191Jy sigma=0.000596 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096191Jy sigma=0.000596 ! Fit after self-cal, rms=0.096140Jy sigma=0.000596 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.312 mas, bmaj=15.9 mas, bpa=21.22 degrees ! Estimated noise=6679.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000376314 Jy ! Component: 100 - total flux cleaned = 0.000152268 Jy ! Component: 150 - total flux cleaned = 0.000524366 Jy ! Component: 200 - total flux cleaned = 0.000741433 Jy ! Total flux subtracted in 200 components = 0.000741433 Jy ! Clean residual min=-0.001195 max=0.001204 Jy/beam ! Clean residual mean=-0.000008 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.646304 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 225 components and 0.646304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096046Jy sigma=0.000595 ! Fit after self-cal, rms=0.096053Jy sigma=0.000595 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300128 Jy ! Component: 100 - total flux cleaned = 0.00085277 Jy ! Component: 150 - total flux cleaned = 0.00109327 Jy ! Component: 200 - total flux cleaned = 0.00121041 Jy ! Total flux subtracted in 200 components = 0.00121041 Jy ! Clean residual min=-0.000975 max=0.000983 Jy/beam ! Clean residual mean=-0.000003 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.647514 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 243 components and 0.647514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095988Jy sigma=0.000595 ! Fit after self-cal, rms=0.095988Jy sigma=0.000595 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095988Jy sigma=0.000595 ! Fit after self-cal, rms=0.095915Jy sigma=0.000595 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.166 mas, bmaj=16.12 mas, bpa=20.11 degrees ! Estimated noise=6797.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178534 Jy ! Component: 100 - total flux cleaned = -1.88043e-05 Jy ! Component: 150 - total flux cleaned = 0.000190725 Jy ! Component: 200 - total flux cleaned = 0.00019193 Jy ! Total flux subtracted in 200 components = 0.00019193 Jy ! Clean residual min=-0.000848 max=0.000861 Jy/beam ! Clean residual mean=-0.000006 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.647706 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 268 components and 0.647706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095862Jy sigma=0.000595 ! Fit after self-cal, rms=0.095865Jy sigma=0.000595 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198928 Jy ! Component: 100 - total flux cleaned = 0.000378066 Jy ! Component: 150 - total flux cleaned = 0.000594618 Jy ! Component: 200 - total flux cleaned = 0.000895378 Jy ! Total flux subtracted in 200 components = 0.000895378 Jy ! Clean residual min=-0.000704 max=0.000713 Jy/beam ! Clean residual mean=-0.000002 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.648601 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 294 components and 0.648601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095826Jy sigma=0.000594 ! Fit after self-cal, rms=0.095825Jy sigma=0.000594 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.313 mas, bmaj=15.9 mas, bpa=21.23 degrees ! Estimated noise=6678.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.313 x 15.9 at 21.23 degrees (North through East) ! Clean map min=-0.0096169 max=0.3999 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.447 mas, bmaj=14.71 mas, bpa=17.25 degrees ! Estimated noise=7797.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.417627 Jy ! Component: 100 - total flux cleaned = 0.535535 Jy ! Component: 150 - total flux cleaned = 0.586982 Jy ! Component: 200 - total flux cleaned = 0.605877 Jy ! Total flux subtracted in 200 components = 0.605877 Jy ! Clean residual min=-0.020926 max=0.020926 Jy/beam ! Clean residual mean=0.000144 rms=0.007325 Jy/beam ! Combined flux in latest and established models = 0.605877 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.605877 Jy ! Inverting map and beam ! Estimated beam: bmin=8.313 mas, bmaj=15.9 mas, bpa=21.23 degrees ! Estimated noise=6678.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201293 Jy ! Component: 100 - total flux cleaned = 0.0274063 Jy ! Component: 150 - total flux cleaned = 0.0279019 Jy ! Component: 200 - total flux cleaned = 0.0275063 Jy ! Total flux subtracted in 200 components = 0.0275063 Jy ! Clean residual min=-0.005829 max=0.005875 Jy/beam ! Clean residual mean=0.000011 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 0.633383 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 113 components and 0.633383 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.166 mas, bmaj=16.12 mas, bpa=20.11 degrees ! Estimated noise=6797.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00408512 Jy ! Component: 100 - total flux cleaned = -0.00749371 Jy ! Component: 150 - total flux cleaned = -0.00856164 Jy ! Component: 200 - total flux cleaned = -0.008856 Jy ! Total flux subtracted in 200 components = -0.008856 Jy ! Clean residual min=-0.002353 max=0.002381 Jy/beam ! Clean residual mean=-0.000005 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.624527 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00095585 Jy ! Component: 100 - total flux cleaned = 0.00200623 Jy ! Component: 150 - total flux cleaned = 0.0030479 Jy ! Component: 200 - total flux cleaned = 0.0039718 Jy ! Total flux subtracted in 200 components = 0.0039718 Jy ! Clean residual min=-0.002191 max=0.002219 Jy/beam ! Clean residual mean=-0.000005 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.628498 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 212 components and 0.628499 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.313 mas, bmaj=15.9 mas, bpa=21.23 degrees ! Estimated noise=6678.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215813 Jy ! Component: 100 - total flux cleaned = 5.26858e-05 Jy ! Component: 150 - total flux cleaned = 0.00039451 Jy ! Component: 200 - total flux cleaned = 0.000888365 Jy ! Total flux subtracted in 200 components = 0.000888365 Jy ! Clean residual min=-0.001335 max=0.001340 Jy/beam ! Clean residual mean=-0.000008 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.629387 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 257 components and 0.629387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096204Jy sigma=0.000597 ! Fit after self-cal, rms=0.096163Jy sigma=0.000597 wmodel J2320+0513_S_2017_01_16_pus_map.mod ! Writing 257 model components to file: J2320+0513_S_2017_01_16_pus_map.mod wobs J2320+0513_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2320+0513_S_2017_01_16_pus_uvs.fits wwins J2320+0513_S_2017_01_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2320+0513_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.313 x 15.9 at 21.23 degrees (North through East) ! Clean map min=-0.0053559 max=0.38085 Jy/beam ! Writing clean map to FITS file: J2320+0513_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.380845 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000424672 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.334523 0.334523 0.669047 1.33809 2.67619 5.35237 10.7047 21.4095 42.819 85.638 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.38 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.313 x 15.9 at 21.23 degrees (North through East) ! Clean map min=-0.0053559 max=0.38085 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2320+0513_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:26:07 2019