! Started logfile: J2319-3656_S_2017_09_26_pus_uvs.log on Sat May 11 13:08:36 2019 obs J2319-3656_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2319-3656_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.327381 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2319-3656 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 13860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2319-3656_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2064 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992265Jy sigma=0.006273 ! Fit after self-cal, rms=0.928851Jy sigma=0.005896 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=32.64 mas, bpa=-15.38 degrees ! Estimated noise=3115.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0538853 Jy ! Component: 100 - total flux cleaned = 0.0671709 Jy ! Total flux subtracted in 100 components = 0.0671709 Jy ! Clean residual min=-0.006011 max=0.007025 Jy/beam ! Clean residual mean=-0.000149 rms=0.001878 Jy/beam ! Combined flux in latest and established models = 0.0671709 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0671709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095130Jy sigma=0.000571 ! Fit after self-cal, rms=0.094249Jy sigma=0.000565 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.553 mas, bmaj=33.52 mas, bpa=-14.85 degrees ! Estimated noise=1164.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00912046 Jy ! Component: 100 - total flux cleaned = 0.0133644 Jy ! Component: 150 - total flux cleaned = 0.0133944 Jy ! Component: 200 - total flux cleaned = 0.0131411 Jy ! Total flux subtracted in 200 components = 0.0131411 Jy ! Clean residual min=-0.003867 max=0.004266 Jy/beam ! Clean residual mean=-0.000080 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.080312 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 0.080312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093150Jy sigma=0.000561 ! Fit after self-cal, rms=0.093056Jy sigma=0.000561 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.00* KP 1.02 ! LA 1.03 MK 1.01 NL 1.00* OV 1.11 ! PT 1.13 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.03 ! LA 1.00 MK 1.03 NL 1.00* OV 0.97 ! PT 1.02 ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 0.98 ! LA 0.88 MK 1.03 NL 1.00* OV 1.03 ! PT 1.08 ! ! ! Correcting IF 4. ! A total of 474 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.00* ! LA 1.00* MK 0.88 NL 1.00* OV 1.11 ! PT 0.98 ! ! ! Fit before self-cal, rms=0.093056Jy sigma=0.000561 ! Fit after self-cal, rms=0.091722Jy sigma=0.000564 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.622 mas, bmaj=32.88 mas, bpa=-14.74 degrees ! Estimated noise=1191.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202246 Jy ! Component: 100 - total flux cleaned = -0.000362398 Jy ! Component: 150 - total flux cleaned = -0.000533044 Jy ! Component: 200 - total flux cleaned = -0.000651898 Jy ! Total flux subtracted in 200 components = -0.000651898 Jy ! Clean residual min=-0.003408 max=0.002834 Jy/beam ! Clean residual mean=-0.000016 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.0796601 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.0796601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091688Jy sigma=0.000564 ! Fit after self-cal, rms=0.091696Jy sigma=0.000563 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091696Jy sigma=0.000563 ! Fit after self-cal, rms=0.091180Jy sigma=0.000562 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.633 mas, bmaj=32.68 mas, bpa=-14.75 degrees ! Estimated noise=1186.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159891 Jy ! Component: 100 - total flux cleaned = -0.000202379 Jy ! Component: 150 - total flux cleaned = -0.000227668 Jy ! Component: 200 - total flux cleaned = -0.000251708 Jy ! Total flux subtracted in 200 components = -0.000251708 Jy ! Clean residual min=-0.002719 max=0.003099 Jy/beam ! Clean residual mean=0.000041 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0794084 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.0794084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091176Jy sigma=0.000562 ! Fit after self-cal, rms=0.091307Jy sigma=0.000561 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-87, 39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254361 Jy ! Component: 100 - total flux cleaned = 0.00360137 Jy ! Component: 150 - total flux cleaned = 0.00416655 Jy ! Component: 200 - total flux cleaned = 0.0046346 Jy ! Total flux subtracted in 200 components = 0.0046346 Jy ! Clean residual min=-0.002005 max=0.001627 Jy/beam ! Clean residual mean=0.000018 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.084043 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 125 components and 0.084043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091236Jy sigma=0.000561 ! Fit after self-cal, rms=0.091201Jy sigma=0.000561 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091201Jy sigma=0.000561 ! Fit after self-cal, rms=0.091486Jy sigma=0.000561 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.626 mas, bmaj=32.62 mas, bpa=-14.76 degrees ! Estimated noise=1181.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157801 Jy ! Component: 100 - total flux cleaned = 0.0023193 Jy ! Component: 150 - total flux cleaned = 0.00277697 Jy ! Component: 200 - total flux cleaned = 0.00315214 Jy ! Total flux subtracted in 200 components = 0.00315214 Jy ! Clean residual min=-0.001925 max=0.001451 Jy/beam ! Clean residual mean=0.000034 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0871952 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 155 components and 0.0871952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091457Jy sigma=0.000560 ! Fit after self-cal, rms=0.091506Jy sigma=0.000560 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000937748 Jy ! Component: 100 - total flux cleaned = 0.00131358 Jy ! Component: 150 - total flux cleaned = 0.00165451 Jy ! Component: 200 - total flux cleaned = 0.0019719 Jy ! Total flux subtracted in 200 components = 0.0019719 Jy ! Clean residual min=-0.001979 max=0.001513 Jy/beam ! Clean residual mean=0.000039 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0891671 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 175 components and 0.0891671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091491Jy sigma=0.000560 ! Fit after self-cal, rms=0.091457Jy sigma=0.000560 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091457Jy sigma=0.000560 ! Fit after self-cal, rms=0.091562Jy sigma=0.000560 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.54 mas, bmaj=42.25 mas, bpa=-0.3896 degrees ! Estimated noise=1316.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000895492 Jy ! Component: 100 - total flux cleaned = 0.0012603 Jy ! Component: 150 - total flux cleaned = 0.00140835 Jy ! Component: 200 - total flux cleaned = 0.00147598 Jy ! Total flux subtracted in 200 components = 0.00147598 Jy ! Clean residual min=-0.002346 max=0.001548 Jy/beam ! Clean residual mean=0.000046 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0906431 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 217 components and 0.0906431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091554Jy sigma=0.000560 ! Fit after self-cal, rms=0.091572Jy sigma=0.000560 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433413 Jy ! Component: 100 - total flux cleaned = 0.000603184 Jy ! Component: 150 - total flux cleaned = 0.000703197 Jy ! Component: 200 - total flux cleaned = 0.000794177 Jy ! Total flux subtracted in 200 components = 0.000794177 Jy ! Clean residual min=-0.002372 max=0.001556 Jy/beam ! Clean residual mean=0.000051 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0914373 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 238 components and 0.0914372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091568Jy sigma=0.000560 ! Fit after self-cal, rms=0.091554Jy sigma=0.000560 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.628 mas, bmaj=32.6 mas, bpa=-14.75 degrees ! Estimated noise=1180.43 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.628 x 32.6 at -14.75 degrees (North through East) ! Clean map min=-0.0021644 max=0.073615 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=32.66 mas, bpa=-15.28 degrees ! Estimated noise=3161.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.054174 Jy ! Component: 100 - total flux cleaned = 0.0677912 Jy ! Component: 150 - total flux cleaned = 0.075898 Jy ! Component: 200 - total flux cleaned = 0.0817495 Jy ! Total flux subtracted in 200 components = 0.0817495 Jy ! Clean residual min=-0.003962 max=0.004048 Jy/beam ! Clean residual mean=-0.000022 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.0817495 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0817495 Jy ! Inverting map and beam ! Estimated beam: bmin=4.628 mas, bmaj=32.6 mas, bpa=-14.75 degrees ! Estimated noise=1180.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416657 Jy ! Component: 100 - total flux cleaned = 0.00690937 Jy ! Component: 150 - total flux cleaned = 0.0088962 Jy ! Component: 200 - total flux cleaned = 0.0100712 Jy ! Total flux subtracted in 200 components = 0.0100712 Jy ! Clean residual min=-0.002618 max=0.001966 Jy/beam ! Clean residual mean=0.000040 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0918207 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 100 components and 0.0918206 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.54 mas, bmaj=42.25 mas, bpa=-0.3896 degrees ! Estimated noise=1316.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000933542 Jy ! Component: 100 - total flux cleaned = 0.00107418 Jy ! Component: 150 - total flux cleaned = 0.000965182 Jy ! Component: 200 - total flux cleaned = 0.000836855 Jy ! Total flux subtracted in 200 components = 0.000836855 Jy ! Clean residual min=-0.002663 max=0.001724 Jy/beam ! Clean residual mean=0.000061 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0926575 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140175 Jy ! Component: 100 - total flux cleaned = -0.000240153 Jy ! Component: 150 - total flux cleaned = -0.000305873 Jy ! Component: 200 - total flux cleaned = -0.000364041 Jy ! Total flux subtracted in 200 components = -0.000364041 Jy ! Clean residual min=-0.002494 max=0.001664 Jy/beam ! Clean residual mean=0.000058 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.0922935 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 185 components and 0.0922935 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.628 mas, bmaj=32.6 mas, bpa=-14.75 degrees ! Estimated noise=1180.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03023e-05 Jy ! Component: 100 - total flux cleaned = -7.30365e-05 Jy ! Component: 150 - total flux cleaned = -0.000131244 Jy ! Component: 200 - total flux cleaned = -0.000166253 Jy ! Total flux subtracted in 200 components = -0.000166253 Jy ! Clean residual min=-0.002110 max=0.001633 Jy/beam ! Clean residual mean=0.000041 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0921272 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 206 components and 0.0921272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091560Jy sigma=0.000560 ! Fit after self-cal, rms=0.091541Jy sigma=0.000560 wmodel J2319-3656_S_2017_09_26_pus_map.mod ! Writing 206 model components to file: J2319-3656_S_2017_09_26_pus_map.mod wobs J2319-3656_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2319-3656_S_2017_09_26_pus_uvs.fits wwins J2319-3656_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J2319-3656_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000582863 Jy ! Component: 100 - total flux cleaned = -0.000611151 Jy ! Component: 150 - total flux cleaned = -0.000312744 Jy ! Component: 200 - total flux cleaned = -0.000105657 Jy ! Component: 250 - total flux cleaned = 8.30916e-05 Jy ! Component: 300 - total flux cleaned = 0.000310788 Jy ! Component: 350 - total flux cleaned = 0.000492842 Jy ! Component: 400 - total flux cleaned = 0.000634384 Jy ! Component: 450 - total flux cleaned = 0.000770371 Jy ! Component: 500 - total flux cleaned = 0.000858287 Jy ! Component: 550 - total flux cleaned = 0.000986399 Jy ! Component: 600 - total flux cleaned = 0.00109686 Jy ! Component: 650 - total flux cleaned = 0.00119096 Jy ! Component: 700 - total flux cleaned = 0.0012566 Jy ! Component: 750 - total flux cleaned = 0.00133372 Jy ! Component: 800 - total flux cleaned = 0.00144753 Jy ! Component: 850 - total flux cleaned = 0.00150992 Jy ! Component: 900 - total flux cleaned = 0.00158399 Jy ! Component: 950 - total flux cleaned = 0.00162065 Jy ! Component: 1000 - total flux cleaned = 0.00163287 Jy ! Component: 1050 - total flux cleaned = 0.0016208 Jy ! Component: 1100 - total flux cleaned = 0.00160876 Jy ! Component: 1150 - total flux cleaned = 0.00159688 Jy ! Component: 1200 - total flux cleaned = 0.00158495 Jy ! Component: 1250 - total flux cleaned = 0.00156124 Jy ! Component: 1300 - total flux cleaned = 0.00153773 Jy ! Component: 1350 - total flux cleaned = 0.00149078 Jy ! Component: 1400 - total flux cleaned = 0.00147912 Jy ! Component: 1450 - total flux cleaned = 0.00144397 Jy ! Component: 1500 - total flux cleaned = 0.00140897 Jy ! Component: 1550 - total flux cleaned = 0.00140902 Jy ! Component: 1600 - total flux cleaned = 0.00138563 Jy ! Component: 1650 - total flux cleaned = 0.00138569 Jy ! Component: 1700 - total flux cleaned = 0.00136243 Jy ! Component: 1750 - total flux cleaned = 0.0013975 Jy ! Component: 1800 - total flux cleaned = 0.00133905 Jy ! Component: 1850 - total flux cleaned = 0.00133902 Jy ! Component: 1900 - total flux cleaned = 0.00131541 Jy ! Component: 1950 - total flux cleaned = 0.00128015 Jy ! Component: 2000 - total flux cleaned = 0.001233 Jy ! Component: 2050 - total flux cleaned = 0.00120932 Jy ! Component: 2100 - total flux cleaned = 0.00114993 Jy ! Component: 2150 - total flux cleaned = 0.00110221 Jy ! Component: 2200 - total flux cleaned = 0.00104229 Jy ! Component: 2250 - total flux cleaned = 0.000982 Jy ! Component: 2300 - total flux cleaned = 0.000945524 Jy ! Component: 2350 - total flux cleaned = 0.000896873 Jy ! Component: 2400 - total flux cleaned = 0.000860213 Jy ! Component: 2450 - total flux cleaned = 0.000761789 Jy ! Component: 2500 - total flux cleaned = 0.00067502 Jy ! Component: 2550 - total flux cleaned = 0.000612499 Jy ! Component: 2600 - total flux cleaned = 0.000524165 Jy ! Component: 2650 - total flux cleaned = 0.000498688 Jy ! Component: 2700 - total flux cleaned = 0.000396151 Jy ! Component: 2750 - total flux cleaned = 0.000292755 Jy ! Component: 2800 - total flux cleaned = 0.000175401 Jy ! Component: 2850 - total flux cleaned = 4.3482e-05 Jy ! Component: 2900 - total flux cleaned = -4.97683e-05 Jy ! Component: 2950 - total flux cleaned = -0.000157269 Jy ! Component: 3000 - total flux cleaned = -0.000320466 Jy ! Component: 3050 - total flux cleaned = -0.00040296 Jy ! Component: 3100 - total flux cleaned = -0.000513844 Jy ! Component: 3150 - total flux cleaned = -0.00065377 Jy ! Component: 3200 - total flux cleaned = -0.000809331 Jy ! Component: 3250 - total flux cleaned = -0.000938008 Jy ! Component: 3300 - total flux cleaned = -0.00108244 Jy ! Component: 3350 - total flux cleaned = -0.00124287 Jy ! Component: 3400 - total flux cleaned = -0.00137585 Jy ! Component: 3450 - total flux cleaned = -0.00152508 Jy ! Component: 3500 - total flux cleaned = -0.00164568 Jy ! Component: 3550 - total flux cleaned = -0.0018134 Jy ! Component: 3600 - total flux cleaned = -0.00198307 Jy ! Component: 3650 - total flux cleaned = -0.0021234 Jy ! Component: 3700 - total flux cleaned = -0.00226516 Jy ! Component: 3750 - total flux cleaned = -0.00244093 Jy ! Component: 3800 - total flux cleaned = -0.00255405 Jy ! Component: 3850 - total flux cleaned = -0.00271727 Jy ! Component: 3900 - total flux cleaned = -0.00286604 Jy ! Component: 3950 - total flux cleaned = -0.00299982 Jy ! Component: 4000 - total flux cleaned = -0.00315192 Jy ! Component: 4050 - total flux cleaned = -0.00330579 Jy ! Total flux subtracted in 4096 components = -0.00344414 Jy ! Clean residual min=-0.000957 max=0.001056 Jy/beam ! Clean residual mean=-0.000021 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.0886831 Jy keep ! Adding 189 model components to the UV plane model. ! The established model now contains 395 components and 0.0886831 Jy ![Exited script file: muppet] wmap "J2319-3656_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.628 x 32.6 at -14.75 degrees (North through East) ! Clean map min=-0.0028046 max=0.07248 Jy/beam ! Writing clean map to FITS file: J2319-3656_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0724795 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000360111 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.49054 1.49054 2.98107 5.96215 11.9243 23.8486 47.6972 95.3944 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.628 x 32.6 at -14.75 degrees (North through East) ! Clean map min=-0.0028046 max=0.07248 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2319-3656_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:08:43 2019