! Started logfile: J2318-4010_S_2017_01_21_pus_uvs.log on Sun May 5 16:06:42 2019 obs J2318-4010_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2318-4010_S_2017_01_21_pus_uva.fits ! AN table 1: 95 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.30848 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2318-4010 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 4220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2318-4010_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 500 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 380 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 432 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 717 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.916841Jy sigma=0.004801 ! Fit after self-cal, rms=0.860343Jy sigma=0.004524 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.31 mas, bmaj=7.93 mas, bpa=1.133 degrees ! Estimated noise=4436.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114387 Jy ! Component: 100 - total flux cleaned = 0.138434 Jy ! Total flux subtracted in 100 components = 0.138434 Jy ! Clean residual min=-0.016499 max=0.016763 Jy/beam ! Clean residual mean=-0.000269 rms=0.004533 Jy/beam ! Combined flux in latest and established models = 0.138434 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.138434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140383Jy sigma=0.000633 ! Fit after self-cal, rms=0.140241Jy sigma=0.000633 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.433 mas, bmaj=7.874 mas, bpa=-0.1252 degrees ! Estimated noise=2835.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154723 Jy ! Component: 100 - total flux cleaned = 0.0229375 Jy ! Component: 150 - total flux cleaned = 0.0271429 Jy ! Component: 200 - total flux cleaned = 0.028455 Jy ! Total flux subtracted in 200 components = 0.028455 Jy ! Clean residual min=-0.008904 max=0.009566 Jy/beam ! Clean residual mean=-0.000370 rms=0.002639 Jy/beam ! Combined flux in latest and established models = 0.166889 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.166889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139177Jy sigma=0.000620 ! Fit after self-cal, rms=0.139095Jy sigma=0.000620 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.98 ! MK 1.08 NL 1.00* OV 1.35 PT 0.94 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.31 LA 0.93 ! MK 1.08 NL 1.05 OV 1.56 PT 0.98 ! SC 1.09 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.93 ! MK 1.03 NL 1.11 OV 1.00* PT 0.96 ! SC 0.94 ! ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Fit before self-cal, rms=0.139095Jy sigma=0.000620 ! Fit after self-cal, rms=0.164969Jy sigma=0.000619 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.422 mas, bmaj=7.885 mas, bpa=1.459 degrees ! Estimated noise=3025.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000722227 Jy ! Component: 100 - total flux cleaned = -0.000982881 Jy ! Component: 150 - total flux cleaned = -0.00119864 Jy ! Component: 200 - total flux cleaned = -0.00129379 Jy ! Total flux subtracted in 200 components = -0.00129379 Jy ! Clean residual min=-0.006366 max=0.006471 Jy/beam ! Clean residual mean=-0.000057 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.165595 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 0.165595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164903Jy sigma=0.000619 ! Fit after self-cal, rms=0.165811Jy sigma=0.000618 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165811Jy sigma=0.000618 ! Fit after self-cal, rms=0.168970Jy sigma=0.000616 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.434 mas, bmaj=7.898 mas, bpa=1.62 degrees ! Estimated noise=3037.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319837 Jy ! Component: 100 - total flux cleaned = -0.000525352 Jy ! Component: 150 - total flux cleaned = -0.000666905 Jy ! Component: 200 - total flux cleaned = -0.000733701 Jy ! Total flux subtracted in 200 components = -0.000733701 Jy ! Clean residual min=-0.005893 max=0.005439 Jy/beam ! Clean residual mean=-0.000032 rms=0.001393 Jy/beam ! Combined flux in latest and established models = 0.164862 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.164862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168936Jy sigma=0.000616 ! Fit after self-cal, rms=0.169065Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.28055e-05 Jy ! Component: 100 - total flux cleaned = -4.2623e-05 Jy ! Component: 150 - total flux cleaned = -0.000147546 Jy ! Component: 200 - total flux cleaned = -0.000147166 Jy ! Total flux subtracted in 200 components = -0.000147166 Jy ! Clean residual min=-0.005998 max=0.005514 Jy/beam ! Clean residual mean=-0.000037 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.164715 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.164715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169035Jy sigma=0.000616 ! Fit after self-cal, rms=0.169034Jy sigma=0.000616 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169034Jy sigma=0.000616 ! Fit after self-cal, rms=0.169452Jy sigma=0.000616 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.44 mas, bmaj=7.915 mas, bpa=1.693 degrees ! Estimated noise=3034.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000624147 Jy ! Component: 100 - total flux cleaned = -0.00077996 Jy ! Component: 150 - total flux cleaned = -0.000883745 Jy ! Component: 200 - total flux cleaned = -0.000949812 Jy ! Total flux subtracted in 200 components = -0.000949812 Jy ! Clean residual min=-0.005699 max=0.005156 Jy/beam ! Clean residual mean=-0.000036 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.163765 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.163765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169421Jy sigma=0.000616 ! Fit after self-cal, rms=0.169494Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.29264e-05 Jy ! Component: 100 - total flux cleaned = -8.96723e-05 Jy ! Component: 150 - total flux cleaned = -0.000153678 Jy ! Component: 200 - total flux cleaned = -0.000185091 Jy ! Total flux subtracted in 200 components = -0.000185091 Jy ! Clean residual min=-0.005735 max=0.005143 Jy/beam ! Clean residual mean=-0.000040 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.16358 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.16358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169470Jy sigma=0.000615 ! Fit after self-cal, rms=0.169467Jy sigma=0.000615 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169467Jy sigma=0.000615 ! Fit after self-cal, rms=0.169548Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.986 mas, bmaj=21.28 mas, bpa=4.714 degrees ! Estimated noise=4661.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000740783 Jy ! Component: 100 - total flux cleaned = -0.000901886 Jy ! Component: 150 - total flux cleaned = -0.0010434 Jy ! Component: 200 - total flux cleaned = -0.00110813 Jy ! Total flux subtracted in 200 components = -0.00110813 Jy ! Clean residual min=-0.006578 max=0.005666 Jy/beam ! Clean residual mean=-0.000113 rms=0.002003 Jy/beam ! Combined flux in latest and established models = 0.162472 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.162472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169504Jy sigma=0.000616 ! Fit after self-cal, rms=0.169502Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.9844e-06 Jy ! Component: 100 - total flux cleaned = -0.000144049 Jy ! Component: 150 - total flux cleaned = -0.00026413 Jy ! Component: 200 - total flux cleaned = -0.000318776 Jy ! Total flux subtracted in 200 components = -0.000318776 Jy ! Clean residual min=-0.006514 max=0.005752 Jy/beam ! Clean residual mean=-0.000126 rms=0.001989 Jy/beam ! Combined flux in latest and established models = 0.162153 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 39 components and 0.162153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169494Jy sigma=0.000616 ! Fit after self-cal, rms=0.169452Jy sigma=0.000616 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.446 mas, bmaj=7.928 mas, bpa=1.757 degrees ! Estimated noise=3030.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.446 x 7.928 at 1.757 degrees (North through East) ! Clean map min=-0.0054686 max=0.14701 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.321 mas, bmaj=7.952 mas, bpa=2.129 degrees ! Estimated noise=4978.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117025 Jy ! Component: 100 - total flux cleaned = 0.142804 Jy ! Component: 150 - total flux cleaned = 0.146891 Jy ! Component: 200 - total flux cleaned = 0.149576 Jy ! Total flux subtracted in 200 components = 0.149576 Jy ! Clean residual min=-0.014141 max=0.011619 Jy/beam ! Clean residual mean=-0.000125 rms=0.003728 Jy/beam ! Combined flux in latest and established models = 0.149576 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.149576 Jy ! Inverting map and beam ! Estimated beam: bmin=2.446 mas, bmaj=7.928 mas, bpa=1.757 degrees ! Estimated noise=3030.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00745898 Jy ! Component: 100 - total flux cleaned = 0.0102162 Jy ! Component: 150 - total flux cleaned = 0.0109215 Jy ! Component: 200 - total flux cleaned = 0.011455 Jy ! Total flux subtracted in 200 components = 0.011455 Jy ! Clean residual min=-0.005972 max=0.005822 Jy/beam ! Clean residual mean=-0.000062 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.161031 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 26 components and 0.161031 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.986 mas, bmaj=21.28 mas, bpa=4.714 degrees ! Estimated noise=4661.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132408 Jy ! Component: 100 - total flux cleaned = 0.00123577 Jy ! Component: 150 - total flux cleaned = 0.00114913 Jy ! Component: 200 - total flux cleaned = 0.000987611 Jy ! Total flux subtracted in 200 components = 0.000987611 Jy ! Clean residual min=-0.006877 max=0.006049 Jy/beam ! Clean residual mean=-0.000127 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 0.162018 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145701 Jy ! Component: 100 - total flux cleaned = -0.000209334 Jy ! Component: 150 - total flux cleaned = -0.000328407 Jy ! Component: 200 - total flux cleaned = -0.000383259 Jy ! Total flux subtracted in 200 components = -0.000383259 Jy ! Clean residual min=-0.006683 max=0.005943 Jy/beam ! Clean residual mean=-0.000146 rms=0.002013 Jy/beam ! Combined flux in latest and established models = 0.161635 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.161635 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.446 mas, bmaj=7.928 mas, bpa=1.757 degrees ! Estimated noise=3030.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356609 Jy ! Component: 100 - total flux cleaned = 0.000720233 Jy ! Component: 150 - total flux cleaned = 0.00084303 Jy ! Component: 200 - total flux cleaned = 0.00075434 Jy ! Total flux subtracted in 200 components = 0.00075434 Jy ! Clean residual min=-0.005616 max=0.004858 Jy/beam ! Clean residual mean=-0.000040 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.16239 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.16239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169443Jy sigma=0.000615 ! Fit after self-cal, rms=0.169503Jy sigma=0.000615 wmodel J2318-4010_S_2017_01_21_pus_map.mod ! Writing 42 model components to file: J2318-4010_S_2017_01_21_pus_map.mod wobs J2318-4010_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2318-4010_S_2017_01_21_pus_uvs.fits wwins J2318-4010_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J2318-4010_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175569 Jy ! Component: 100 - total flux cleaned = -0.00296696 Jy ! Component: 150 - total flux cleaned = -0.00354124 Jy ! Component: 200 - total flux cleaned = -0.0037443 Jy ! Component: 250 - total flux cleaned = -0.003745 Jy ! Component: 300 - total flux cleaned = -0.0036251 Jy ! Component: 350 - total flux cleaned = -0.00345463 Jy ! Component: 400 - total flux cleaned = -0.00312385 Jy ! Component: 450 - total flux cleaned = -0.0027534 Jy ! Component: 500 - total flux cleaned = -0.00239328 Jy ! Component: 550 - total flux cleaned = -0.00219379 Jy ! Component: 600 - total flux cleaned = -0.00204819 Jy ! Component: 650 - total flux cleaned = -0.00195526 Jy ! Component: 700 - total flux cleaned = -0.00209359 Jy ! Component: 750 - total flux cleaned = -0.00213825 Jy ! Component: 800 - total flux cleaned = -0.00227014 Jy ! Component: 850 - total flux cleaned = -0.00231282 Jy ! Component: 900 - total flux cleaned = -0.00248087 Jy ! Component: 950 - total flux cleaned = -0.0025211 Jy ! Component: 1000 - total flux cleaned = -0.00256093 Jy ! Component: 1050 - total flux cleaned = -0.00256076 Jy ! Component: 1100 - total flux cleaned = -0.00259958 Jy ! Component: 1150 - total flux cleaned = -0.00256192 Jy ! Component: 1200 - total flux cleaned = -0.00263744 Jy ! Component: 1250 - total flux cleaned = -0.00271169 Jy ! Component: 1300 - total flux cleaned = -0.00282105 Jy ! Component: 1350 - total flux cleaned = -0.00282095 Jy ! Component: 1400 - total flux cleaned = -0.0027857 Jy ! Component: 1450 - total flux cleaned = -0.00275079 Jy ! Component: 1500 - total flux cleaned = -0.00275073 Jy ! Component: 1550 - total flux cleaned = -0.00271658 Jy ! Component: 1600 - total flux cleaned = -0.00268292 Jy ! Component: 1650 - total flux cleaned = -0.00275054 Jy ! Component: 1700 - total flux cleaned = -0.00264981 Jy ! Component: 1750 - total flux cleaned = -0.00261657 Jy ! Component: 1800 - total flux cleaned = -0.00264964 Jy ! Component: 1850 - total flux cleaned = -0.0026167 Jy ! Component: 1900 - total flux cleaned = -0.0025516 Jy ! Component: 1950 - total flux cleaned = -0.00258444 Jy ! Component: 2000 - total flux cleaned = -0.00255176 Jy ! Component: 2050 - total flux cleaned = -0.0025196 Jy ! Component: 2100 - total flux cleaned = -0.00239142 Jy ! Component: 2150 - total flux cleaned = -0.0023275 Jy ! Component: 2200 - total flux cleaned = -0.00219993 Jy ! Component: 2250 - total flux cleaned = -0.00204073 Jy ! Component: 2300 - total flux cleaned = -0.00185014 Jy ! Component: 2350 - total flux cleaned = -0.00169129 Jy ! Component: 2400 - total flux cleaned = -0.00150129 Jy ! Component: 2450 - total flux cleaned = -0.00134305 Jy ! Component: 2500 - total flux cleaned = -0.00118493 Jy ! Component: 2550 - total flux cleaned = -0.000995614 Jy ! Component: 2600 - total flux cleaned = -0.000838153 Jy ! Component: 2650 - total flux cleaned = -0.000838075 Jy ! Component: 2700 - total flux cleaned = -0.000774868 Jy ! Component: 2750 - total flux cleaned = -0.000648185 Jy ! Component: 2800 - total flux cleaned = -0.000584519 Jy ! Component: 2850 - total flux cleaned = -0.000520804 Jy ! Component: 2900 - total flux cleaned = -0.000424851 Jy ! Component: 2950 - total flux cleaned = -0.000328725 Jy ! Component: 3000 - total flux cleaned = -0.000296487 Jy ! Component: 3050 - total flux cleaned = -0.000231915 Jy ! Component: 3100 - total flux cleaned = -0.000167271 Jy ! Component: 3150 - total flux cleaned = -4.17148e-06 Jy ! Component: 3200 - total flux cleaned = 9.4342e-05 Jy ! Component: 3250 - total flux cleaned = 9.43405e-05 Jy ! Component: 3300 - total flux cleaned = 0.000226352 Jy ! Component: 3350 - total flux cleaned = 0.000326344 Jy ! Component: 3400 - total flux cleaned = 0.000393354 Jy ! Component: 3450 - total flux cleaned = 0.000494162 Jy ! Component: 3500 - total flux cleaned = 0.000494184 Jy ! Component: 3550 - total flux cleaned = 0.000562102 Jy ! Component: 3600 - total flux cleaned = 0.000561912 Jy ! Component: 3650 - total flux cleaned = 0.00059606 Jy ! Component: 3700 - total flux cleaned = 0.000630309 Jy ! Component: 3750 - total flux cleaned = 0.000630228 Jy ! Component: 3800 - total flux cleaned = 0.000700104 Jy ! Component: 3850 - total flux cleaned = 0.0006643 Jy ! Component: 3900 - total flux cleaned = 0.000664566 Jy ! Component: 3950 - total flux cleaned = 0.000628865 Jy ! Component: 4000 - total flux cleaned = 0.000593159 Jy ! Component: 4050 - total flux cleaned = 0.000629073 Jy ! Total flux subtracted in 4096 components = 0.000664921 Jy ! Clean residual min=-0.002012 max=0.002041 Jy/beam ! Clean residual mean=0.000027 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.163054 Jy keep ! Adding 194 model components to the UV plane model. ! The established model now contains 236 components and 0.163055 Jy ![Exited script file: muppet] wmap "J2318-4010_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.446 x 7.928 at 1.757 degrees (North through East) ! Clean map min=-0.0033199 max=0.14863 Jy/beam ! Writing clean map to FITS file: J2318-4010_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.148627 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000644557 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30102 1.30102 2.60204 5.20407 10.4081 20.8163 41.6326 83.2651 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.446 x 7.928 at 1.757 degrees (North through East) ! Clean map min=-0.0033199 max=0.14863 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2318-4010_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:06:46 2019