! Started logfile: J2318-4010_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:25:59 2019 obs J2318-4010_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2318-4010_S_2017_01_16_pus_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.461574 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2318-4010 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 3988 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2318-4010_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.873255Jy sigma=0.004733 ! Fit after self-cal, rms=0.843669Jy sigma=0.004583 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=29.86 mas, bpa=26.38 degrees ! Estimated noise=3105.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133983 Jy ! Component: 100 - total flux cleaned = 0.164337 Jy ! Total flux subtracted in 100 components = 0.164337 Jy ! Clean residual min=-0.009363 max=0.013420 Jy/beam ! Clean residual mean=-0.000189 rms=0.003130 Jy/beam ! Combined flux in latest and established models = 0.164337 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.164337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174154Jy sigma=0.000655 ! Fit after self-cal, rms=0.174077Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=29.3 mas, bpa=25.84 degrees ! Estimated noise=2204.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113499 Jy ! Component: 100 - total flux cleaned = 0.0174866 Jy ! Component: 150 - total flux cleaned = 0.0212932 Jy ! Component: 200 - total flux cleaned = 0.023778 Jy ! Total flux subtracted in 200 components = 0.023778 Jy ! Clean residual min=-0.005974 max=0.005967 Jy/beam ! Clean residual mean=0.000028 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 0.188115 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 51 components and 0.188116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173063Jy sigma=0.000650 ! Fit after self-cal, rms=0.173150Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.00 ! LA 1.06 MK 1.00* NL 1.00 OV 1.02 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.98 ! LA 1.00 MK 1.00* NL 1.21 OV 1.02 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.09 ! LA 1.06 MK 1.00* NL 1.04 OV 0.94 ! PT 0.96 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.96 ! LA 0.76 MK 1.00* NL 1.00* OV 0.92 ! PT 1.00 SC 0.89 ! ! ! Fit before self-cal, rms=0.173150Jy sigma=0.000650 ! Fit after self-cal, rms=0.153191Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=29.9 mas, bpa=25.82 degrees ! Estimated noise=2214.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00164215 Jy ! Component: 100 - total flux cleaned = -0.00200052 Jy ! Component: 150 - total flux cleaned = -0.00209195 Jy ! Component: 200 - total flux cleaned = -0.00213373 Jy ! Total flux subtracted in 200 components = -0.00213373 Jy ! Clean residual min=-0.004818 max=0.004458 Jy/beam ! Clean residual mean=0.000101 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.185982 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.185982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153151Jy sigma=0.000644 ! Fit after self-cal, rms=0.152850Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152850Jy sigma=0.000644 ! Fit after self-cal, rms=0.152526Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=29.99 mas, bpa=25.82 degrees ! Estimated noise=2216.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000678199 Jy ! Component: 100 - total flux cleaned = -0.000808648 Jy ! Component: 150 - total flux cleaned = -0.000849222 Jy ! Component: 200 - total flux cleaned = -0.000962646 Jy ! Total flux subtracted in 200 components = -0.000962646 Jy ! Clean residual min=-0.004712 max=0.004316 Jy/beam ! Clean residual mean=0.000101 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.185019 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.185019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152489Jy sigma=0.000644 ! Fit after self-cal, rms=0.152441Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.57282e-05 Jy ! Component: 100 - total flux cleaned = -8.75195e-06 Jy ! Component: 150 - total flux cleaned = -7.30304e-05 Jy ! Component: 200 - total flux cleaned = -0.000134595 Jy ! Total flux subtracted in 200 components = -0.000134595 Jy ! Clean residual min=-0.004657 max=0.004256 Jy/beam ! Clean residual mean=0.000099 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.184885 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 0.184885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152415Jy sigma=0.000644 ! Fit after self-cal, rms=0.152394Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152394Jy sigma=0.000644 ! Fit after self-cal, rms=0.152999Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=30.09 mas, bpa=25.82 degrees ! Estimated noise=2220.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000457059 Jy ! Component: 100 - total flux cleaned = -0.000601422 Jy ! Component: 150 - total flux cleaned = -0.000667528 Jy ! Component: 200 - total flux cleaned = -0.00073032 Jy ! Total flux subtracted in 200 components = -0.00073032 Jy ! Clean residual min=-0.004608 max=0.004177 Jy/beam ! Clean residual mean=0.000097 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.184154 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 0.184154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152972Jy sigma=0.000644 ! Fit after self-cal, rms=0.152965Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.02851e-05 Jy ! Component: 100 - total flux cleaned = 4.14995e-05 Jy ! Component: 150 - total flux cleaned = 1.32546e-05 Jy ! Component: 200 - total flux cleaned = -4.09969e-05 Jy ! Total flux subtracted in 200 components = -4.09969e-05 Jy ! Clean residual min=-0.004561 max=0.004126 Jy/beam ! Clean residual mean=0.000097 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.184113 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.184113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152945Jy sigma=0.000644 ! Fit after self-cal, rms=0.152931Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152931Jy sigma=0.000644 ! Fit after self-cal, rms=0.153646Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.901 mas, bmaj=45.92 mas, bpa=12.52 degrees ! Estimated noise=2503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000450517 Jy ! Component: 100 - total flux cleaned = -0.000700516 Jy ! Component: 150 - total flux cleaned = -0.000783288 Jy ! Component: 200 - total flux cleaned = -0.000801046 Jy ! Total flux subtracted in 200 components = -0.000801046 Jy ! Clean residual min=-0.005123 max=0.004138 Jy/beam ! Clean residual mean=0.000141 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.183312 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 110 components and 0.183312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153635Jy sigma=0.000644 ! Fit after self-cal, rms=0.153649Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.58229e-05 Jy ! Component: 100 - total flux cleaned = -1.89181e-05 Jy ! Component: 150 - total flux cleaned = -4.787e-05 Jy ! Component: 200 - total flux cleaned = -7.56146e-05 Jy ! Total flux subtracted in 200 components = -7.56146e-05 Jy ! Clean residual min=-0.005041 max=0.004110 Jy/beam ! Clean residual mean=0.000141 rms=0.001460 Jy/beam ! Combined flux in latest and established models = 0.183237 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 115 components and 0.183237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153644Jy sigma=0.000644 ! Fit after self-cal, rms=0.153646Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=30.19 mas, bpa=25.82 degrees ! Estimated noise=2224.47 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.808 x 30.19 at 25.82 degrees (North through East) ! Clean map min=-0.0044621 max=0.16777 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=30.68 mas, bpa=26.37 degrees ! Estimated noise=3089.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13331 Jy ! Component: 100 - total flux cleaned = 0.162719 Jy ! Component: 150 - total flux cleaned = 0.172484 Jy ! Component: 200 - total flux cleaned = 0.177561 Jy ! Total flux subtracted in 200 components = 0.177561 Jy ! Clean residual min=-0.005441 max=0.005455 Jy/beam ! Clean residual mean=0.000022 rms=0.001595 Jy/beam ! Combined flux in latest and established models = 0.177561 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.177561 Jy ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=30.19 mas, bpa=25.82 degrees ! Estimated noise=2224.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334145 Jy ! Component: 100 - total flux cleaned = 0.00431178 Jy ! Component: 150 - total flux cleaned = 0.00460471 Jy ! Component: 200 - total flux cleaned = 0.0047776 Jy ! Total flux subtracted in 200 components = 0.0047776 Jy ! Clean residual min=-0.004293 max=0.004292 Jy/beam ! Clean residual mean=0.000082 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.182339 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 84 components and 0.182339 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.901 mas, bmaj=45.92 mas, bpa=12.52 degrees ! Estimated noise=2503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327316 Jy ! Component: 100 - total flux cleaned = 0.00030037 Jy ! Component: 150 - total flux cleaned = 0.000276909 Jy ! Component: 200 - total flux cleaned = 0.000236235 Jy ! Total flux subtracted in 200 components = 0.000236235 Jy ! Clean residual min=-0.004808 max=0.004278 Jy/beam ! Clean residual mean=0.000130 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.182575 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.51525e-05 Jy ! Component: 100 - total flux cleaned = -5.11413e-05 Jy ! Component: 150 - total flux cleaned = -6.55525e-05 Jy ! Component: 200 - total flux cleaned = -6.55298e-05 Jy ! Total flux subtracted in 200 components = -6.55298e-05 Jy ! Clean residual min=-0.004839 max=0.004220 Jy/beam ! Clean residual mean=0.000129 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.18251 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 108 components and 0.18251 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=30.19 mas, bpa=25.82 degrees ! Estimated noise=2224.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254619 Jy ! Component: 100 - total flux cleaned = 0.000215938 Jy ! Component: 150 - total flux cleaned = 0.000213767 Jy ! Component: 200 - total flux cleaned = 0.000273876 Jy ! Total flux subtracted in 200 components = 0.000273876 Jy ! Clean residual min=-0.004363 max=0.004033 Jy/beam ! Clean residual mean=0.000087 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.182784 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 117 components and 0.182784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153678Jy sigma=0.000644 ! Fit after self-cal, rms=0.153659Jy sigma=0.000644 wmodel J2318-4010_S_2017_01_16_pus_map.mod ! Writing 117 model components to file: J2318-4010_S_2017_01_16_pus_map.mod wobs J2318-4010_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2318-4010_S_2017_01_16_pus_uvs.fits wwins J2318-4010_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2318-4010_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127755 Jy ! Component: 100 - total flux cleaned = -0.00148906 Jy ! Component: 150 - total flux cleaned = -0.00107157 Jy ! Component: 200 - total flux cleaned = -0.000413176 Jy ! Component: 250 - total flux cleaned = 9.56145e-05 Jy ! Component: 300 - total flux cleaned = 0.000568823 Jy ! Component: 350 - total flux cleaned = 0.000790633 Jy ! Component: 400 - total flux cleaned = 0.00100315 Jy ! Component: 450 - total flux cleaned = 0.00112468 Jy ! Component: 500 - total flux cleaned = 0.00124024 Jy ! Component: 550 - total flux cleaned = 0.00127666 Jy ! Component: 600 - total flux cleaned = 0.0014945 Jy ! Component: 650 - total flux cleaned = 0.00177734 Jy ! Component: 700 - total flux cleaned = 0.0019845 Jy ! Component: 750 - total flux cleaned = 0.00218805 Jy ! Component: 800 - total flux cleaned = 0.00238809 Jy ! Component: 850 - total flux cleaned = 0.00258453 Jy ! Component: 900 - total flux cleaned = 0.00274551 Jy ! Component: 950 - total flux cleaned = 0.00296752 Jy ! Component: 1000 - total flux cleaned = 0.00312374 Jy ! Component: 1050 - total flux cleaned = 0.00327799 Jy ! Component: 1100 - total flux cleaned = 0.00343018 Jy ! Component: 1150 - total flux cleaned = 0.00361068 Jy ! Component: 1200 - total flux cleaned = 0.0037898 Jy ! Component: 1250 - total flux cleaned = 0.00390851 Jy ! Component: 1300 - total flux cleaned = 0.00417457 Jy ! Component: 1350 - total flux cleaned = 0.00438078 Jy ! Component: 1400 - total flux cleaned = 0.00464536 Jy ! Component: 1450 - total flux cleaned = 0.00490949 Jy ! Component: 1500 - total flux cleaned = 0.00520271 Jy ! Component: 1550 - total flux cleaned = 0.00543743 Jy ! Component: 1600 - total flux cleaned = 0.00552565 Jy ! Component: 1650 - total flux cleaned = 0.0056149 Jy ! Component: 1700 - total flux cleaned = 0.00564501 Jy ! Component: 1750 - total flux cleaned = 0.0057356 Jy ! Component: 1800 - total flux cleaned = 0.00582721 Jy ! Component: 1850 - total flux cleaned = 0.00588887 Jy ! Component: 1900 - total flux cleaned = 0.00598269 Jy ! Component: 1950 - total flux cleaned = 0.0060458 Jy ! Component: 2000 - total flux cleaned = 0.0061732 Jy ! Component: 2050 - total flux cleaned = 0.00620538 Jy ! Component: 2100 - total flux cleaned = 0.00627058 Jy ! Component: 2150 - total flux cleaned = 0.00637037 Jy ! Component: 2200 - total flux cleaned = 0.00643755 Jy ! Component: 2250 - total flux cleaned = 0.00643705 Jy ! Component: 2300 - total flux cleaned = 0.00650678 Jy ! Component: 2350 - total flux cleaned = 0.00654159 Jy ! Component: 2400 - total flux cleaned = 0.00661387 Jy ! Component: 2450 - total flux cleaned = 0.0067246 Jy ! Component: 2500 - total flux cleaned = 0.00676224 Jy ! Component: 2550 - total flux cleaned = 0.00687758 Jy ! Component: 2600 - total flux cleaned = 0.00691668 Jy ! Component: 2650 - total flux cleaned = 0.00703726 Jy ! Component: 2700 - total flux cleaned = 0.00707801 Jy ! Component: 2750 - total flux cleaned = 0.00716105 Jy ! Component: 2800 - total flux cleaned = 0.00724586 Jy ! Component: 2850 - total flux cleaned = 0.00733376 Jy ! Component: 2900 - total flux cleaned = 0.007468 Jy ! Component: 2950 - total flux cleaned = 0.00755965 Jy ! Component: 3000 - total flux cleaned = 0.00765273 Jy ! Component: 3050 - total flux cleaned = 0.00779545 Jy ! Component: 3100 - total flux cleaned = 0.007941 Jy ! Component: 3150 - total flux cleaned = 0.00804108 Jy ! Component: 3200 - total flux cleaned = 0.00814216 Jy ! Component: 3250 - total flux cleaned = 0.00829793 Jy ! Component: 3300 - total flux cleaned = 0.00840444 Jy ! Component: 3350 - total flux cleaned = 0.00856688 Jy ! Component: 3400 - total flux cleaned = 0.00867799 Jy ! Component: 3450 - total flux cleaned = 0.0087925 Jy ! Component: 3500 - total flux cleaned = 0.00890979 Jy ! Component: 3550 - total flux cleaned = 0.00902986 Jy ! Component: 3600 - total flux cleaned = 0.00909166 Jy ! Component: 3650 - total flux cleaned = 0.0092169 Jy ! Component: 3700 - total flux cleaned = 0.00934581 Jy ! Component: 3750 - total flux cleaned = 0.00947836 Jy ! Component: 3800 - total flux cleaned = 0.0095467 Jy ! Component: 3850 - total flux cleaned = 0.00968517 Jy ! Component: 3900 - total flux cleaned = 0.00975684 Jy ! Component: 3950 - total flux cleaned = 0.00982953 Jy ! Component: 4000 - total flux cleaned = 0.00990485 Jy ! Component: 4050 - total flux cleaned = 0.00998323 Jy ! Total flux subtracted in 4096 components = 0.010062 Jy ! Clean residual min=-0.004769 max=0.004435 Jy/beam ! Clean residual mean=0.000029 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.192846 Jy keep ! Adding 189 model components to the UV plane model. ! The established model now contains 306 components and 0.192846 Jy ![Exited script file: muppet] wmap "J2318-4010_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.808 x 30.19 at 25.82 degrees (North through East) ! Clean map min=-0.0096338 max=0.16469 Jy/beam ! Writing clean map to FITS file: J2318-4010_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.164689 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00143076 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.6063 2.6063 5.21261 10.4252 20.8504 41.7008 83.4017 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0042 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.164 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.808 x 30.19 at 25.82 degrees (North through East) ! Clean map min=-0.0096338 max=0.16469 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2318-4010_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:26:04 2019