! Started logfile: J2316+0405_S_2017_02_19_pus_uvs.log on Sat May 4 19:01:33 2019 obs J2316+0405_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2316+0405_S_2017_02_19_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781246 visibilities/baseline/integration-bin. ! Found source: J2316+0405 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 24328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2316+0405_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 718 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918579Jy sigma=0.007127 ! Fit after self-cal, rms=0.892626Jy sigma=0.006941 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=6.508 mas, bpa=-5.13 degrees ! Estimated noise=1036.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0755571 Jy ! Component: 100 - total flux cleaned = 0.113109 Jy ! Total flux subtracted in 100 components = 0.113109 Jy ! Clean residual min=-0.014915 max=0.037060 Jy/beam ! Clean residual mean=0.000051 rms=0.004886 Jy/beam ! Combined flux in latest and established models = 0.113109 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.113109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173251Jy sigma=0.001226 ! Fit after self-cal, rms=0.172521Jy sigma=0.001220 ! Inverting map ! Added new window around map position (-4.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0370568 Jy ! Component: 100 - total flux cleaned = 0.0630447 Jy ! Total flux subtracted in 100 components = 0.0630447 Jy ! Clean residual min=-0.013346 max=0.037026 Jy/beam ! Clean residual mean=0.000040 rms=0.004095 Jy/beam ! Combined flux in latest and established models = 0.176154 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 54 components and 0.176154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155405Jy sigma=0.001099 ! Fit after self-cal, rms=0.153784Jy sigma=0.001085 ! Inverting map ! Added new window around map position (5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0318836 Jy ! Component: 100 - total flux cleaned = 0.0548461 Jy ! Total flux subtracted in 100 components = 0.0548461 Jy ! Clean residual min=-0.011753 max=0.021056 Jy/beam ! Clean residual mean=0.000029 rms=0.003308 Jy/beam ! Combined flux in latest and established models = 0.231 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 79 components and 0.231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140095Jy sigma=0.000987 ! Fit after self-cal, rms=0.139179Jy sigma=0.000980 ! Inverting map ! Added new window around map position (-8.5, 7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238637 Jy ! Component: 100 - total flux cleaned = 0.0426394 Jy ! Total flux subtracted in 100 components = 0.0426394 Jy ! Clean residual min=-0.011453 max=0.011464 Jy/beam ! Clean residual mean=0.000024 rms=0.002884 Jy/beam ! Combined flux in latest and established models = 0.273639 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 107 components and 0.273639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129878Jy sigma=0.000914 ! Fit after self-cal, rms=0.129431Jy sigma=0.000911 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=7.18 mas, bpa=-4.525 degrees ! Estimated noise=646.615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032586 Jy ! Component: 100 - total flux cleaned = 0.057477 Jy ! Component: 150 - total flux cleaned = 0.0779122 Jy ! Component: 200 - total flux cleaned = 0.0950375 Jy ! Total flux subtracted in 200 components = 0.0950375 Jy ! Clean residual min=-0.014735 max=0.013718 Jy/beam ! Clean residual mean=0.000045 rms=0.003721 Jy/beam ! Combined flux in latest and established models = 0.368676 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 157 components and 0.368676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114973Jy sigma=0.000812 ! Fit after self-cal, rms=0.113977Jy sigma=0.000804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.94 HN 1.03 KP 0.95 ! LA 0.82 MK 1.16 NL 0.86 OV 1.16 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.07 KP 0.94 ! LA 0.79 MK 1.02 NL 0.99 OV 1.20 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.04 HN 1.03 KP 0.85 ! LA 0.64 MK 1.08 NL 1.10 OV 1.21 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.99 KP 1.00* ! LA 0.72 MK 1.07 NL 1.00* OV 1.09 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.113977Jy sigma=0.000804 ! Fit after self-cal, rms=0.098115Jy sigma=0.000746 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=7.24 mas, bpa=-3.485 degrees ! Estimated noise=612.711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378625 Jy ! Component: 100 - total flux cleaned = 0.00714106 Jy ! Component: 150 - total flux cleaned = 0.0101196 Jy ! Component: 200 - total flux cleaned = 0.0120672 Jy ! Total flux subtracted in 200 components = 0.0120672 Jy ! Clean residual min=-0.008670 max=0.009086 Jy/beam ! Clean residual mean=0.000017 rms=0.002185 Jy/beam ! Combined flux in latest and established models = 0.380744 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 175 components and 0.380744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096743Jy sigma=0.000736 ! Fit after self-cal, rms=0.096667Jy sigma=0.000733 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096667Jy sigma=0.000733 ! Fit after self-cal, rms=0.097030Jy sigma=0.000723 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=7.196 mas, bpa=-2.991 degrees ! Estimated noise=612.655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123054 Jy ! Component: 100 - total flux cleaned = 0.00362559 Jy ! Component: 150 - total flux cleaned = 0.00557184 Jy ! Component: 200 - total flux cleaned = 0.00665072 Jy ! Total flux subtracted in 200 components = 0.00665072 Jy ! Clean residual min=-0.007759 max=0.008714 Jy/beam ! Clean residual mean=0.000003 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 0.387394 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 181 components and 0.387394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096333Jy sigma=0.000718 ! Fit after self-cal, rms=0.096285Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00863005 Jy ! Component: 100 - total flux cleaned = 0.0138433 Jy ! Component: 150 - total flux cleaned = 0.0172804 Jy ! Component: 200 - total flux cleaned = 0.0202537 Jy ! Total flux subtracted in 200 components = 0.0202537 Jy ! Clean residual min=-0.006906 max=0.008093 Jy/beam ! Clean residual mean=0.000008 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 0.407648 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 211 components and 0.407648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095294Jy sigma=0.000708 ! Fit after self-cal, rms=0.095118Jy sigma=0.000706 ! Inverting map ! Added new window around map position (19.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00877962 Jy ! Component: 100 - total flux cleaned = 0.0147443 Jy ! Component: 150 - total flux cleaned = 0.0189213 Jy ! Component: 200 - total flux cleaned = 0.0223999 Jy ! Total flux subtracted in 200 components = 0.0223999 Jy ! Clean residual min=-0.005722 max=0.005308 Jy/beam ! Clean residual mean=0.000001 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.430048 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 246 components and 0.430048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094030Jy sigma=0.000696 ! Fit after self-cal, rms=0.093859Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093859Jy sigma=0.000695 ! Fit after self-cal, rms=0.092239Jy sigma=0.000692 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=7.179 mas, bpa=-2.457 degrees ! Estimated noise=597.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386745 Jy ! Component: 100 - total flux cleaned = 0.00739858 Jy ! Component: 150 - total flux cleaned = 0.0107112 Jy ! Component: 200 - total flux cleaned = 0.0136676 Jy ! Total flux subtracted in 200 components = 0.0136676 Jy ! Clean residual min=-0.004707 max=0.004459 Jy/beam ! Clean residual mean=0.000001 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.443715 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 271 components and 0.443715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091628Jy sigma=0.000686 ! Fit after self-cal, rms=0.091544Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250383 Jy ! Component: 100 - total flux cleaned = 0.00507317 Jy ! Component: 150 - total flux cleaned = 0.00736166 Jy ! Component: 200 - total flux cleaned = 0.00931864 Jy ! Total flux subtracted in 200 components = 0.00931864 Jy ! Clean residual min=-0.004152 max=0.004172 Jy/beam ! Clean residual mean=-0.000000 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.453034 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 286 components and 0.453034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091175Jy sigma=0.000682 ! Fit after self-cal, rms=0.091106Jy sigma=0.000682 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091106Jy sigma=0.000682 ! Fit after self-cal, rms=0.089528Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.98 mas, bmaj=10.56 mas, bpa=3.003 degrees ! Estimated noise=759.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00610865 Jy ! Component: 100 - total flux cleaned = 0.00967618 Jy ! Component: 150 - total flux cleaned = 0.0126642 Jy ! Component: 200 - total flux cleaned = 0.0150462 Jy ! Total flux subtracted in 200 components = 0.0150462 Jy ! Clean residual min=-0.004357 max=0.004727 Jy/beam ! Clean residual mean=0.000001 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 0.46808 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 323 components and 0.46808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089265Jy sigma=0.000678 ! Fit after self-cal, rms=0.089184Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231115 Jy ! Component: 100 - total flux cleaned = 0.00444439 Jy ! Component: 150 - total flux cleaned = 0.00624826 Jy ! Component: 200 - total flux cleaned = 0.007819 Jy ! Total flux subtracted in 200 components = 0.007819 Jy ! Clean residual min=-0.003852 max=0.004290 Jy/beam ! Clean residual mean=-0.000002 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.475899 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 348 components and 0.475899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089084Jy sigma=0.000677 ! Fit after self-cal, rms=0.089058Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=7.166 mas, bpa=-2.355 degrees ! Estimated noise=585.921 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 7.166 at -2.355 degrees (North through East) ! Clean map min=-0.0033641 max=0.088537 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=6.455 mas, bpa=-2.991 degrees ! Estimated noise=947.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0680988 Jy ! Component: 100 - total flux cleaned = 0.113854 Jy ! Component: 150 - total flux cleaned = 0.150207 Jy ! Component: 200 - total flux cleaned = 0.180023 Jy ! Total flux subtracted in 200 components = 0.180023 Jy ! Clean residual min=-0.011588 max=0.018119 Jy/beam ! Clean residual mean=0.000026 rms=0.003434 Jy/beam ! Combined flux in latest and established models = 0.180023 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.180023 Jy ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=7.166 mas, bpa=-2.355 degrees ! Estimated noise=585.921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0417528 Jy ! Component: 100 - total flux cleaned = 0.0734711 Jy ! Component: 150 - total flux cleaned = 0.0989983 Jy ! Component: 200 - total flux cleaned = 0.120058 Jy ! Total flux subtracted in 200 components = 0.120058 Jy ! Clean residual min=-0.010719 max=0.012783 Jy/beam ! Clean residual mean=0.000031 rms=0.003181 Jy/beam ! Combined flux in latest and established models = 0.300081 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 126 components and 0.300081 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.98 mas, bmaj=10.56 mas, bpa=3.003 degrees ! Estimated noise=759.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329563 Jy ! Component: 100 - total flux cleaned = 0.056133 Jy ! Component: 150 - total flux cleaned = 0.0742319 Jy ! Component: 200 - total flux cleaned = 0.088946 Jy ! Total flux subtracted in 200 components = 0.088946 Jy ! Clean residual min=-0.011247 max=0.010029 Jy/beam ! Clean residual mean=0.000027 rms=0.003122 Jy/beam ! Combined flux in latest and established models = 0.389027 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122842 Jy ! Component: 100 - total flux cleaned = 0.022653 Jy ! Component: 150 - total flux cleaned = 0.0314988 Jy ! Component: 200 - total flux cleaned = 0.0391522 Jy ! Total flux subtracted in 200 components = 0.0391522 Jy ! Clean residual min=-0.007021 max=0.006531 Jy/beam ! Clean residual mean=0.000013 rms=0.001992 Jy/beam ! Combined flux in latest and established models = 0.428179 Jy ! Adding 132 model components to the UV plane model. ! The established model now contains 233 components and 0.428179 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=7.166 mas, bpa=-2.355 degrees ! Estimated noise=585.921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725247 Jy ! Component: 100 - total flux cleaned = 0.0110511 Jy ! Component: 150 - total flux cleaned = 0.0150222 Jy ! Component: 200 - total flux cleaned = 0.0184368 Jy ! Total flux subtracted in 200 components = 0.0184368 Jy ! Clean residual min=-0.004910 max=0.005310 Jy/beam ! Clean residual mean=0.000003 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.446616 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 258 components and 0.446616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090139Jy sigma=0.000685 ! Fit after self-cal, rms=0.089471Jy sigma=0.000681 wmodel J2316+0405_S_2017_02_19_pus_map.mod ! Writing 258 model components to file: J2316+0405_S_2017_02_19_pus_map.mod wobs J2316+0405_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2316+0405_S_2017_02_19_pus_uvs.fits wwins J2316+0405_S_2017_02_19_pus_map.win ! wwins: Wrote 6 windows to J2316+0405_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037505 Jy ! Component: 100 - total flux cleaned = 0.000350969 Jy ! Component: 150 - total flux cleaned = 0.00109528 Jy ! Component: 200 - total flux cleaned = 0.0018705 Jy ! Component: 250 - total flux cleaned = 0.00249438 Jy ! Component: 300 - total flux cleaned = 0.0027976 Jy ! Component: 350 - total flux cleaned = 0.00326516 Jy ! Component: 400 - total flux cleaned = 0.00371879 Jy ! Component: 450 - total flux cleaned = 0.00421653 Jy ! Component: 500 - total flux cleaned = 0.00475506 Jy ! Component: 550 - total flux cleaned = 0.0052803 Jy ! Component: 600 - total flux cleaned = 0.0057932 Jy ! Component: 650 - total flux cleaned = 0.00619452 Jy ! Component: 700 - total flux cleaned = 0.00653849 Jy ! Component: 750 - total flux cleaned = 0.00697062 Jy ! Component: 800 - total flux cleaned = 0.00734671 Jy ! Component: 850 - total flux cleaned = 0.00789753 Jy ! Component: 900 - total flux cleaned = 0.00821284 Jy ! Component: 950 - total flux cleaned = 0.00861176 Jy ! Component: 1000 - total flux cleaned = 0.00900276 Jy ! Component: 1050 - total flux cleaned = 0.00942906 Jy ! Component: 1100 - total flux cleaned = 0.00976291 Jy ! Component: 1150 - total flux cleaned = 0.0100098 Jy ! Component: 1200 - total flux cleaned = 0.0104158 Jy ! Component: 1250 - total flux cleaned = 0.0106149 Jy ! Component: 1300 - total flux cleaned = 0.0109677 Jy ! Component: 1350 - total flux cleaned = 0.011084 Jy ! Component: 1400 - total flux cleaned = 0.0113508 Jy ! Component: 1450 - total flux cleaned = 0.0115017 Jy ! Component: 1500 - total flux cleaned = 0.0117238 Jy ! Component: 1550 - total flux cleaned = 0.0119058 Jy ! Component: 1600 - total flux cleaned = 0.0121208 Jy ! Component: 1650 - total flux cleaned = 0.012368 Jy ! Component: 1700 - total flux cleaned = 0.0125068 Jy ! Component: 1750 - total flux cleaned = 0.0126776 Jy ! Component: 1800 - total flux cleaned = 0.0129139 Jy ! Component: 1850 - total flux cleaned = 0.0130475 Jy ! Component: 1900 - total flux cleaned = 0.0132444 Jy ! Component: 1950 - total flux cleaned = 0.0134382 Jy ! Component: 2000 - total flux cleaned = 0.0136619 Jy ! Component: 2050 - total flux cleaned = 0.0137562 Jy ! Component: 2100 - total flux cleaned = 0.0140669 Jy ! Component: 2150 - total flux cleaned = 0.0142511 Jy ! Component: 2200 - total flux cleaned = 0.0144326 Jy ! Component: 2250 - total flux cleaned = 0.0146418 Jy ! Component: 2300 - total flux cleaned = 0.0148194 Jy ! Component: 2350 - total flux cleaned = 0.0149938 Jy ! Component: 2400 - total flux cleaned = 0.0150795 Jy ! Component: 2450 - total flux cleaned = 0.0153639 Jy ! Component: 2500 - total flux cleaned = 0.0154202 Jy ! Component: 2550 - total flux cleaned = 0.0155875 Jy ! Component: 2600 - total flux cleaned = 0.0157246 Jy ! Component: 2650 - total flux cleaned = 0.0159419 Jy ! Component: 2700 - total flux cleaned = 0.0159687 Jy ! Component: 2750 - total flux cleaned = 0.016208 Jy ! Component: 2800 - total flux cleaned = 0.0162864 Jy ! Component: 2850 - total flux cleaned = 0.016469 Jy ! Component: 2900 - total flux cleaned = 0.0166754 Jy ! Component: 2950 - total flux cleaned = 0.0168285 Jy ! Component: 3000 - total flux cleaned = 0.0169292 Jy ! Component: 3050 - total flux cleaned = 0.0170541 Jy ! Component: 3100 - total flux cleaned = 0.0171529 Jy ! Component: 3150 - total flux cleaned = 0.0172999 Jy ! Component: 3200 - total flux cleaned = 0.0174698 Jy ! Component: 3250 - total flux cleaned = 0.0175423 Jy ! Component: 3300 - total flux cleaned = 0.0177088 Jy ! Component: 3350 - total flux cleaned = 0.0177792 Jy ! Component: 3400 - total flux cleaned = 0.0179194 Jy ! Component: 3450 - total flux cleaned = 0.0181272 Jy ! Component: 3500 - total flux cleaned = 0.0182643 Jy ! Component: 3550 - total flux cleaned = 0.0184005 Jy ! Component: 3600 - total flux cleaned = 0.0185575 Jy ! Component: 3650 - total flux cleaned = 0.0186689 Jy ! Component: 3700 - total flux cleaned = 0.0189112 Jy ! Component: 3750 - total flux cleaned = 0.0189548 Jy ! Component: 3800 - total flux cleaned = 0.0191929 Jy ! Component: 3850 - total flux cleaned = 0.0194072 Jy ! Component: 3900 - total flux cleaned = 0.0195136 Jy ! Component: 3950 - total flux cleaned = 0.0197032 Jy ! Component: 4000 - total flux cleaned = 0.0197866 Jy ! Component: 4050 - total flux cleaned = 0.019973 Jy ! Total flux subtracted in 4096 components = 0.0200553 Jy ! Clean residual min=-0.001115 max=0.001173 Jy/beam ! Clean residual mean=0.000002 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.466671 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 575 components and 0.466672 Jy ![Exited script file: muppet] wmap "J2316+0405_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 7.166 at -2.355 degrees (North through East) ! Clean map min=-0.0024755 max=0.087749 Jy/beam ! Writing clean map to FITS file: J2316+0405_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0877494 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000385823 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.31906 1.31906 2.63812 5.27625 10.5525 21.105 42.21 84.42 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 7.166 at -2.355 degrees (North through East) ! Clean map min=-0.0024755 max=0.087749 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2316+0405_S_2017_02_19_pus_uvs.log closed on Sat May 4 19:01:40 2019