! Started logfile: J2313-3704_S_2017_10_21_pus_uvs.log on Sat May 11 21:07:52 2019 obs J2313-3704_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2313-3704_S_2017_10_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.575231 visibilities/baseline/integration-bin. ! Found source: J2313-3704 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 11928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2313-3704_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 424 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 355 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 365 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 799 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.778926Jy sigma=0.005407 ! Fit after self-cal, rms=0.747302Jy sigma=0.005195 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=36.24 mas, bpa=-13.73 degrees ! Estimated noise=1803.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186965 Jy ! Component: 100 - total flux cleaned = 0.240635 Jy ! Total flux subtracted in 100 components = 0.240635 Jy ! Clean residual min=-0.014969 max=0.023292 Jy/beam ! Clean residual mean=-0.000164 rms=0.005270 Jy/beam ! Combined flux in latest and established models = 0.240635 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.240635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131933Jy sigma=0.000826 ! Fit after self-cal, rms=0.131914Jy sigma=0.000826 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.109 mas, bmaj=37.5 mas, bpa=-13.91 degrees ! Estimated noise=1156.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329285 Jy ! Component: 100 - total flux cleaned = 0.0466472 Jy ! Component: 150 - total flux cleaned = 0.0519858 Jy ! Component: 200 - total flux cleaned = 0.0523936 Jy ! Total flux subtracted in 200 components = 0.0523936 Jy ! Clean residual min=-0.007070 max=0.009014 Jy/beam ! Clean residual mean=0.000019 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 0.293029 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 59 components and 0.293029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124118Jy sigma=0.000771 ! Fit after self-cal, rms=0.124139Jy sigma=0.000771 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.09 ! LA 1.00 MK 0.98 NL 0.93 OV 0.95 ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.30 KP 1.04 ! LA 0.96 MK 1.00 NL 1.07 OV 1.00 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.03 ! LA 0.74 MK 1.00 NL 1.30 OV 0.90 ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 1.00* ! LA 1.91 MK 1.04 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.124139Jy sigma=0.000771 ! Fit after self-cal, rms=0.122545Jy sigma=0.000726 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.122 mas, bmaj=36.91 mas, bpa=-13.99 degrees ! Estimated noise=1167.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00239543 Jy ! Component: 100 - total flux cleaned = -0.00198218 Jy ! Component: 150 - total flux cleaned = -0.00162472 Jy ! Component: 200 - total flux cleaned = -0.00131676 Jy ! Total flux subtracted in 200 components = -0.00131676 Jy ! Clean residual min=-0.003046 max=0.003579 Jy/beam ! Clean residual mean=0.000001 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.291712 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.291712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122212Jy sigma=0.000725 ! Fit after self-cal, rms=0.122511Jy sigma=0.000724 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122511Jy sigma=0.000724 ! Fit after self-cal, rms=0.123177Jy sigma=0.000721 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.13 mas, bmaj=37.09 mas, bpa=-14.04 degrees ! Estimated noise=1164.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126515 Jy ! Component: 100 - total flux cleaned = -0.00133459 Jy ! Component: 150 - total flux cleaned = -0.00133449 Jy ! Component: 200 - total flux cleaned = -0.0013887 Jy ! Total flux subtracted in 200 components = -0.0013887 Jy ! Clean residual min=-0.002564 max=0.002503 Jy/beam ! Clean residual mean=0.000021 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.290323 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.290323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123159Jy sigma=0.000720 ! Fit after self-cal, rms=0.123185Jy sigma=0.000720 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.27295e-05 Jy ! Component: 100 - total flux cleaned = -9.25524e-05 Jy ! Component: 150 - total flux cleaned = -0.000114294 Jy ! Component: 200 - total flux cleaned = -0.000113854 Jy ! Total flux subtracted in 200 components = -0.000113854 Jy ! Clean residual min=-0.002525 max=0.002466 Jy/beam ! Clean residual mean=0.000020 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.290209 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 0.290209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123176Jy sigma=0.000720 ! Fit after self-cal, rms=0.123174Jy sigma=0.000720 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123174Jy sigma=0.000720 ! Fit after self-cal, rms=0.123644Jy sigma=0.000720 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.137 mas, bmaj=37.12 mas, bpa=-14.05 degrees ! Estimated noise=1164.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000633305 Jy ! Component: 100 - total flux cleaned = -0.000657438 Jy ! Component: 150 - total flux cleaned = -0.000677784 Jy ! Component: 200 - total flux cleaned = -0.000696057 Jy ! Total flux subtracted in 200 components = -0.000696057 Jy ! Clean residual min=-0.002538 max=0.002470 Jy/beam ! Clean residual mean=0.000020 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.289513 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 116 components and 0.289513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123636Jy sigma=0.000720 ! Fit after self-cal, rms=0.123641Jy sigma=0.000720 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.0969e-05 Jy ! Component: 100 - total flux cleaned = -7.82495e-05 Jy ! Component: 150 - total flux cleaned = -9.37702e-05 Jy ! Component: 200 - total flux cleaned = -9.38456e-05 Jy ! Total flux subtracted in 200 components = -9.38456e-05 Jy ! Clean residual min=-0.002518 max=0.002441 Jy/beam ! Clean residual mean=0.000019 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.289419 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 126 components and 0.289419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123636Jy sigma=0.000720 ! Fit after self-cal, rms=0.123635Jy sigma=0.000720 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123635Jy sigma=0.000720 ! Fit after self-cal, rms=0.123804Jy sigma=0.000720 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.45 mas, bmaj=41.59 mas, bpa=-8.045 degrees ! Estimated noise=1290.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000427139 Jy ! Component: 100 - total flux cleaned = -0.000411152 Jy ! Component: 150 - total flux cleaned = -0.000410014 Jy ! Component: 200 - total flux cleaned = -0.000388025 Jy ! Total flux subtracted in 200 components = -0.000388025 Jy ! Clean residual min=-0.002008 max=0.002040 Jy/beam ! Clean residual mean=0.000026 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.289031 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 139 components and 0.289031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123803Jy sigma=0.000720 ! Fit after self-cal, rms=0.123803Jy sigma=0.000720 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122191 Jy ! Component: 100 - total flux cleaned = -0.000121483 Jy ! Component: 150 - total flux cleaned = -0.000100412 Jy ! Component: 200 - total flux cleaned = -8.08454e-05 Jy ! Total flux subtracted in 200 components = -8.08454e-05 Jy ! Clean residual min=-0.002002 max=0.001984 Jy/beam ! Clean residual mean=0.000026 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.28895 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 141 components and 0.28895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123803Jy sigma=0.000720 ! Fit after self-cal, rms=0.123800Jy sigma=0.000720 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.14 mas, bmaj=37.14 mas, bpa=-14.05 degrees ! Estimated noise=1164.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.14 x 37.14 at -14.05 degrees (North through East) ! Clean map min=-0.002405 max=0.24928 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=36.23 mas, bpa=-13.98 degrees ! Estimated noise=1852.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.191603 Jy ! Component: 100 - total flux cleaned = 0.24079 Jy ! Component: 150 - total flux cleaned = 0.262192 Jy ! Component: 200 - total flux cleaned = 0.273336 Jy ! Total flux subtracted in 200 components = 0.273336 Jy ! Clean residual min=-0.005625 max=0.005577 Jy/beam ! Clean residual mean=-0.000042 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.273336 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.273336 Jy ! Inverting map and beam ! Estimated beam: bmin=4.14 mas, bmaj=37.14 mas, bpa=-14.05 degrees ! Estimated noise=1164.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0086896 Jy ! Component: 100 - total flux cleaned = 0.012516 Jy ! Component: 150 - total flux cleaned = 0.0145857 Jy ! Component: 200 - total flux cleaned = 0.0153312 Jy ! Total flux subtracted in 200 components = 0.0153312 Jy ! Clean residual min=-0.002592 max=0.002423 Jy/beam ! Clean residual mean=0.000016 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.288667 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 100 components and 0.288668 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.45 mas, bmaj=41.59 mas, bpa=-8.045 degrees ! Estimated noise=1290.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382612 Jy ! Component: 100 - total flux cleaned = 0.000381396 Jy ! Component: 150 - total flux cleaned = 0.000379943 Jy ! Component: 200 - total flux cleaned = 0.000354389 Jy ! Total flux subtracted in 200 components = 0.000354389 Jy ! Clean residual min=-0.002057 max=0.001924 Jy/beam ! Clean residual mean=0.000026 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.289022 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.62183e-05 Jy ! Component: 100 - total flux cleaned = 6.57062e-05 Jy ! Component: 150 - total flux cleaned = 8.29423e-05 Jy ! Component: 200 - total flux cleaned = 8.18247e-05 Jy ! Total flux subtracted in 200 components = 8.18247e-05 Jy ! Clean residual min=-0.002052 max=0.001945 Jy/beam ! Clean residual mean=0.000027 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.289104 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 152 components and 0.289104 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.14 mas, bmaj=37.14 mas, bpa=-14.05 degrees ! Estimated noise=1164.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218359 Jy ! Component: 100 - total flux cleaned = 0.000220488 Jy ! Component: 150 - total flux cleaned = 0.000126674 Jy ! Component: 200 - total flux cleaned = 7.08781e-05 Jy ! Total flux subtracted in 200 components = 7.08781e-05 Jy ! Clean residual min=-0.002438 max=0.002413 Jy/beam ! Clean residual mean=0.000020 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.289175 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 177 components and 0.289175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123879Jy sigma=0.000720 ! Fit after self-cal, rms=0.123858Jy sigma=0.000720 wmodel J2313-3704_S_2017_10_21_pus_map.mod ! Writing 177 model components to file: J2313-3704_S_2017_10_21_pus_map.mod wobs J2313-3704_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2313-3704_S_2017_10_21_pus_uvs.fits wwins J2313-3704_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2313-3704_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.62247e-05 Jy ! Component: 100 - total flux cleaned = -4.18448e-05 Jy ! Component: 150 - total flux cleaned = -0.000108138 Jy ! Component: 200 - total flux cleaned = -0.000170549 Jy ! Component: 250 - total flux cleaned = -0.00034525 Jy ! Component: 300 - total flux cleaned = -0.000484418 Jy ! Component: 350 - total flux cleaned = -0.000591237 Jy ! Component: 400 - total flux cleaned = -0.000616566 Jy ! Component: 450 - total flux cleaned = -0.00071577 Jy ! Component: 500 - total flux cleaned = -0.000740134 Jy ! Component: 550 - total flux cleaned = -0.00081032 Jy ! Component: 600 - total flux cleaned = -0.000833463 Jy ! Component: 650 - total flux cleaned = -0.000856182 Jy ! Component: 700 - total flux cleaned = -0.000856586 Jy ! Component: 750 - total flux cleaned = -0.000814682 Jy ! Component: 800 - total flux cleaned = -0.000835616 Jy ! Component: 850 - total flux cleaned = -0.000815248 Jy ! Component: 900 - total flux cleaned = -0.000795603 Jy ! Component: 950 - total flux cleaned = -0.000776405 Jy ! Component: 1000 - total flux cleaned = -0.000718872 Jy ! Component: 1050 - total flux cleaned = -0.000642921 Jy ! Component: 1100 - total flux cleaned = -0.000568467 Jy ! Component: 1150 - total flux cleaned = -0.000458896 Jy ! Component: 1200 - total flux cleaned = -0.00038683 Jy ! Component: 1250 - total flux cleaned = -0.000333447 Jy ! Component: 1300 - total flux cleaned = -0.000298264 Jy ! Component: 1350 - total flux cleaned = -0.000246337 Jy ! Component: 1400 - total flux cleaned = -0.000246459 Jy ! Component: 1450 - total flux cleaned = -0.000263182 Jy ! Component: 1500 - total flux cleaned = -0.000246779 Jy ! Component: 1550 - total flux cleaned = -0.000230398 Jy ! Component: 1600 - total flux cleaned = -0.000214161 Jy ! Component: 1650 - total flux cleaned = -0.000181998 Jy ! Component: 1700 - total flux cleaned = -0.000166202 Jy ! Component: 1750 - total flux cleaned = -0.000213685 Jy ! Component: 1800 - total flux cleaned = -0.000182309 Jy ! Component: 1850 - total flux cleaned = -0.000197808 Jy ! Component: 1900 - total flux cleaned = -0.000259618 Jy ! Component: 1950 - total flux cleaned = -0.000305526 Jy ! Component: 2000 - total flux cleaned = -0.000336003 Jy ! Component: 2050 - total flux cleaned = -0.000351214 Jy ! Component: 2100 - total flux cleaned = -0.000396495 Jy ! Component: 2150 - total flux cleaned = -0.000471512 Jy ! Component: 2200 - total flux cleaned = -0.000456558 Jy ! Component: 2250 - total flux cleaned = -0.000501157 Jy ! Component: 2300 - total flux cleaned = -0.000515972 Jy ! Component: 2350 - total flux cleaned = -0.000560144 Jy ! Component: 2400 - total flux cleaned = -0.000604066 Jy ! Component: 2450 - total flux cleaned = -0.000618813 Jy ! Component: 2500 - total flux cleaned = -0.000647914 Jy ! Component: 2550 - total flux cleaned = -0.000677022 Jy ! Component: 2600 - total flux cleaned = -0.00064805 Jy ! Component: 2650 - total flux cleaned = -0.000619047 Jy ! Component: 2700 - total flux cleaned = -0.000604482 Jy ! Component: 2750 - total flux cleaned = -0.000532082 Jy ! Component: 2800 - total flux cleaned = -0.000474093 Jy ! Component: 2850 - total flux cleaned = -0.000401338 Jy ! Component: 2900 - total flux cleaned = -0.000328318 Jy ! Component: 2950 - total flux cleaned = -0.000284207 Jy ! Component: 3000 - total flux cleaned = -0.000210482 Jy ! Component: 3050 - total flux cleaned = -0.000106388 Jy ! Component: 3100 - total flux cleaned = -7.62103e-05 Jy ! Component: 3150 - total flux cleaned = -4.58693e-05 Jy ! Component: 3200 - total flux cleaned = -3.05674e-05 Jy ! Component: 3250 - total flux cleaned = -1.54537e-05 Jy ! Component: 3300 - total flux cleaned = 3.08037e-05 Jy ! Component: 3350 - total flux cleaned = 1.5312e-05 Jy ! Component: 3400 - total flux cleaned = -1.18212e-07 Jy ! Component: 3450 - total flux cleaned = 1.5838e-05 Jy ! Component: 3500 - total flux cleaned = -1.61001e-05 Jy ! Component: 3550 - total flux cleaned = -1.09017e-07 Jy ! Component: 3600 - total flux cleaned = 1.61529e-05 Jy ! Component: 3650 - total flux cleaned = -1.66873e-05 Jy ! Component: 3700 - total flux cleaned = -2.98296e-07 Jy ! Component: 3750 - total flux cleaned = -4.17313e-07 Jy ! Component: 3800 - total flux cleaned = 1.67739e-05 Jy ! Component: 3850 - total flux cleaned = -1.73444e-05 Jy ! Component: 3900 - total flux cleaned = -1.72879e-05 Jy ! Component: 3950 - total flux cleaned = 1.7813e-05 Jy ! Component: 4000 - total flux cleaned = 1.80298e-05 Jy ! Component: 4050 - total flux cleaned = 7.17079e-05 Jy ! Total flux subtracted in 4096 components = 5.37264e-05 Jy ! Clean residual min=-0.000997 max=0.000974 Jy/beam ! Clean residual mean=-0.000009 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.289228 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 427 components and 0.289228 Jy ![Exited script file: muppet] wmap "J2313-3704_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.14 x 37.14 at -14.05 degrees (North through East) ! Clean map min=-0.0025977 max=0.25147 Jy/beam ! Writing clean map to FITS file: J2313-3704_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.25147 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000321204 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.383192 0.383192 0.766383 1.53277 3.06553 6.13107 12.2621 24.5243 49.0485 98.097 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.251 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.14 x 37.14 at -14.05 degrees (North through East) ! Clean map min=-0.0025977 max=0.25147 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2313-3704_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:07:57 2019