! Started logfile: J2313-3704_S_2017_05_01_pus_uvs.log on Wed May 1 18:45:13 2019 obs J2313-3704_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J2313-3704_S_2017_05_01_pus_uva.fits ! AN table 1: 117 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.688509 visibilities/baseline/integration-bin. ! Found source: J2313-3704 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 14500 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2313-3704_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 557 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.826229Jy sigma=0.003946 ! Fit after self-cal, rms=0.763750Jy sigma=0.003693 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.425 mas, bmaj=6.59 mas, bpa=0.1269 degrees ! Estimated noise=2011.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.188157 Jy ! Component: 100 - total flux cleaned = 0.240225 Jy ! Total flux subtracted in 100 components = 0.240225 Jy ! Clean residual min=-0.013511 max=0.034229 Jy/beam ! Clean residual mean=-0.000359 rms=0.004573 Jy/beam ! Combined flux in latest and established models = 0.240225 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.240225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173706Jy sigma=0.000746 ! Fit after self-cal, rms=0.173664Jy sigma=0.000745 ! Inverting map ! Added new window around map position (6, 14.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334165 Jy ! Component: 100 - total flux cleaned = 0.0535665 Jy ! Total flux subtracted in 100 components = 0.0535665 Jy ! Clean residual min=-0.009634 max=0.023307 Jy/beam ! Clean residual mean=-0.000199 rms=0.003065 Jy/beam ! Combined flux in latest and established models = 0.293791 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.293791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165245Jy sigma=0.000689 ! Fit after self-cal, rms=0.164834Jy sigma=0.000686 ! Inverting map ! Added new window around map position (-3.5, 6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196891 Jy ! Component: 100 - total flux cleaned = 0.031738 Jy ! Total flux subtracted in 100 components = 0.031738 Jy ! Clean residual min=-0.008921 max=0.011629 Jy/beam ! Clean residual mean=-0.000100 rms=0.002393 Jy/beam ! Combined flux in latest and established models = 0.325529 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.325529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161964Jy sigma=0.000671 ! Fit after self-cal, rms=0.161822Jy sigma=0.000670 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=7.861 mas, bpa=0.865 degrees ! Estimated noise=1325.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111392 Jy ! Component: 100 - total flux cleaned = 0.0173033 Jy ! Component: 150 - total flux cleaned = 0.0192761 Jy ! Component: 200 - total flux cleaned = 0.0195491 Jy ! Total flux subtracted in 200 components = 0.0195491 Jy ! Clean residual min=-0.005524 max=0.006666 Jy/beam ! Clean residual mean=-0.000037 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 0.345078 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 63 components and 0.345078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160859Jy sigma=0.000666 ! Fit after self-cal, rms=0.160815Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 1.57 KP 1.06 ! LA 0.99 MK 1.02 NL 0.92 OV 1.01 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.71 KP 0.98 ! LA 0.96 MK 1.00 NL 0.99 OV 1.03 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.54 KP 1.02 ! LA 1.01 MK 1.05 NL 1.00 OV 0.93 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.05 HN 1.30 KP 1.00* ! LA 0.79 MK 0.98 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.160815Jy sigma=0.000666 ! Fit after self-cal, rms=0.183039Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=7.856 mas, bpa=0.9997 degrees ! Estimated noise=1349.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00308238 Jy ! Component: 100 - total flux cleaned = -0.00362906 Jy ! Component: 150 - total flux cleaned = -0.00392876 Jy ! Component: 200 - total flux cleaned = -0.00412124 Jy ! Total flux subtracted in 200 components = -0.00412124 Jy ! Clean residual min=-0.005994 max=0.003840 Jy/beam ! Clean residual mean=0.000003 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.340957 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.340957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182948Jy sigma=0.000657 ! Fit after self-cal, rms=0.183019Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183019Jy sigma=0.000656 ! Fit after self-cal, rms=0.186402Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=7.848 mas, bpa=0.9935 degrees ! Estimated noise=1353.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00212191 Jy ! Component: 100 - total flux cleaned = -0.00273286 Jy ! Component: 150 - total flux cleaned = -0.00292121 Jy ! Component: 200 - total flux cleaned = -0.00314177 Jy ! Total flux subtracted in 200 components = -0.00314177 Jy ! Clean residual min=-0.005570 max=0.003793 Jy/beam ! Clean residual mean=0.000006 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.337815 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 0.337815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186340Jy sigma=0.000655 ! Fit after self-cal, rms=0.186379Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000486966 Jy ! Component: 100 - total flux cleaned = -0.000680261 Jy ! Component: 150 - total flux cleaned = -0.000725022 Jy ! Component: 200 - total flux cleaned = -0.000802491 Jy ! Total flux subtracted in 200 components = -0.000802491 Jy ! Clean residual min=-0.005386 max=0.003794 Jy/beam ! Clean residual mean=0.000001 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.337013 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 107 components and 0.337013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186355Jy sigma=0.000655 ! Fit after self-cal, rms=0.186360Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186360Jy sigma=0.000655 ! Fit after self-cal, rms=0.189317Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=7.846 mas, bpa=0.9651 degrees ! Estimated noise=1355.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144521 Jy ! Component: 100 - total flux cleaned = -0.00164948 Jy ! Component: 150 - total flux cleaned = -0.00178541 Jy ! Component: 200 - total flux cleaned = -0.00186465 Jy ! Total flux subtracted in 200 components = -0.00186465 Jy ! Clean residual min=-0.005178 max=0.003763 Jy/beam ! Clean residual mean=0.000007 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.335148 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 123 components and 0.335148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189286Jy sigma=0.000655 ! Fit after self-cal, rms=0.189327Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000280208 Jy ! Component: 100 - total flux cleaned = -0.000355321 Jy ! Component: 150 - total flux cleaned = -0.000388145 Jy ! Component: 200 - total flux cleaned = -0.000419837 Jy ! Total flux subtracted in 200 components = -0.000419837 Jy ! Clean residual min=-0.005026 max=0.003775 Jy/beam ! Clean residual mean=0.000005 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.334728 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 125 components and 0.334728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189312Jy sigma=0.000655 ! Fit after self-cal, rms=0.189318Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189318Jy sigma=0.000655 ! Fit after self-cal, rms=0.191435Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.722 mas, bmaj=27.06 mas, bpa=6.745 degrees ! Estimated noise=1642.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117058 Jy ! Component: 100 - total flux cleaned = -0.00130955 Jy ! Component: 150 - total flux cleaned = -0.00138279 Jy ! Component: 200 - total flux cleaned = -0.0014481 Jy ! Total flux subtracted in 200 components = -0.0014481 Jy ! Clean residual min=-0.004372 max=0.003846 Jy/beam ! Clean residual mean=0.000012 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.33328 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 134 components and 0.33328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191432Jy sigma=0.000655 ! Fit after self-cal, rms=0.191460Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196655 Jy ! Component: 100 - total flux cleaned = -0.000234607 Jy ! Component: 150 - total flux cleaned = -0.000285076 Jy ! Component: 200 - total flux cleaned = -0.000315156 Jy ! Total flux subtracted in 200 components = -0.000315156 Jy ! Clean residual min=-0.004240 max=0.003867 Jy/beam ! Clean residual mean=0.000008 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.332965 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 137 components and 0.332965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191462Jy sigma=0.000655 ! Fit after self-cal, rms=0.191465Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=7.842 mas, bpa=0.9393 degrees ! Estimated noise=1355.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.029 x 7.842 at 0.9393 degrees (North through East) ! Clean map min=-0.004427 max=0.23587 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.449 mas, bmaj=6.512 mas, bpa=0.2458 degrees ! Estimated noise=2100.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195288 Jy ! Component: 100 - total flux cleaned = 0.250533 Jy ! Component: 150 - total flux cleaned = 0.281138 Jy ! Component: 200 - total flux cleaned = 0.300155 Jy ! Total flux subtracted in 200 components = 0.300155 Jy ! Clean residual min=-0.008022 max=0.011344 Jy/beam ! Clean residual mean=-0.000110 rms=0.002068 Jy/beam ! Combined flux in latest and established models = 0.300155 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.300155 Jy ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=7.842 mas, bpa=0.9393 degrees ! Estimated noise=1355.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164307 Jy ! Component: 100 - total flux cleaned = 0.024563 Jy ! Component: 150 - total flux cleaned = 0.0290573 Jy ! Component: 200 - total flux cleaned = 0.0313169 Jy ! Total flux subtracted in 200 components = 0.0313169 Jy ! Clean residual min=-0.004270 max=0.003833 Jy/beam ! Clean residual mean=-0.000006 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.331472 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 63 components and 0.331472 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.722 mas, bmaj=27.06 mas, bpa=6.745 degrees ! Estimated noise=1642.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192799 Jy ! Component: 100 - total flux cleaned = 0.00196453 Jy ! Component: 150 - total flux cleaned = 0.00196427 Jy ! Component: 200 - total flux cleaned = 0.00196517 Jy ! Total flux subtracted in 200 components = 0.00196517 Jy ! Clean residual min=-0.004342 max=0.003629 Jy/beam ! Clean residual mean=0.000014 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.333437 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.09319e-07 Jy ! Component: 100 - total flux cleaned = 2.40965e-07 Jy ! Component: 150 - total flux cleaned = -9.20467e-07 Jy ! Component: 200 - total flux cleaned = -1.26011e-06 Jy ! Total flux subtracted in 200 components = -1.26011e-06 Jy ! Clean residual min=-0.004295 max=0.003624 Jy/beam ! Clean residual mean=0.000014 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.333436 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 74 components and 0.333436 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=7.842 mas, bpa=0.9393 degrees ! Estimated noise=1355.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.91193e-05 Jy ! Component: 100 - total flux cleaned = -3.13649e-05 Jy ! Component: 150 - total flux cleaned = -3.1374e-05 Jy ! Component: 200 - total flux cleaned = 6.31489e-05 Jy ! Total flux subtracted in 200 components = 6.31489e-05 Jy ! Clean residual min=-0.004024 max=0.003707 Jy/beam ! Clean residual mean=0.000007 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.333499 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.333499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191601Jy sigma=0.000655 ! Fit after self-cal, rms=0.191600Jy sigma=0.000655 wmodel J2313-3704_S_2017_05_01_pus_map.mod ! Writing 85 model components to file: J2313-3704_S_2017_05_01_pus_map.mod wobs J2313-3704_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J2313-3704_S_2017_05_01_pus_uvs.fits wwins J2313-3704_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J2313-3704_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000815914 Jy ! Component: 100 - total flux cleaned = -0.000259056 Jy ! Component: 150 - total flux cleaned = 8.9964e-05 Jy ! Component: 200 - total flux cleaned = 0.000471338 Jy ! Component: 250 - total flux cleaned = 0.000892102 Jy ! Component: 300 - total flux cleaned = 0.00109566 Jy ! Component: 350 - total flux cleaned = 0.00119317 Jy ! Component: 400 - total flux cleaned = 0.00133449 Jy ! Component: 450 - total flux cleaned = 0.00137982 Jy ! Component: 500 - total flux cleaned = 0.00137909 Jy ! Component: 550 - total flux cleaned = 0.00142169 Jy ! Component: 600 - total flux cleaned = 0.00137901 Jy ! Component: 650 - total flux cleaned = 0.00125591 Jy ! Component: 700 - total flux cleaned = 0.00117592 Jy ! Component: 750 - total flux cleaned = 0.00109781 Jy ! Component: 800 - total flux cleaned = 0.00109656 Jy ! Component: 850 - total flux cleaned = 0.00102159 Jy ! Component: 900 - total flux cleaned = 0.00109543 Jy ! Component: 950 - total flux cleaned = 0.00105936 Jy ! Component: 1000 - total flux cleaned = 0.00105907 Jy ! Component: 1050 - total flux cleaned = 0.00102511 Jy ! Component: 1100 - total flux cleaned = 0.00109321 Jy ! Component: 1150 - total flux cleaned = 0.000959015 Jy ! Component: 1200 - total flux cleaned = 0.000992444 Jy ! Component: 1250 - total flux cleaned = 0.000959395 Jy ! Component: 1300 - total flux cleaned = 0.000863268 Jy ! Component: 1350 - total flux cleaned = 0.000737431 Jy ! Component: 1400 - total flux cleaned = 0.000737383 Jy ! Component: 1450 - total flux cleaned = 0.000706968 Jy ! Component: 1500 - total flux cleaned = 0.000706184 Jy ! Component: 1550 - total flux cleaned = 0.000529074 Jy ! Component: 1600 - total flux cleaned = 0.000500081 Jy ! Component: 1650 - total flux cleaned = 0.000499276 Jy ! Component: 1700 - total flux cleaned = 0.000300426 Jy ! Component: 1750 - total flux cleaned = 0.000104271 Jy ! Component: 1800 - total flux cleaned = -6.35363e-06 Jy ! Component: 1850 - total flux cleaned = -0.000143133 Jy ! Component: 1900 - total flux cleaned = -0.000170307 Jy ! Component: 1950 - total flux cleaned = -0.00035705 Jy ! Component: 2000 - total flux cleaned = -0.000383415 Jy ! Component: 2050 - total flux cleaned = -0.000513738 Jy ! Component: 2100 - total flux cleaned = -0.000539801 Jy ! Component: 2150 - total flux cleaned = -0.000641572 Jy ! Component: 2200 - total flux cleaned = -0.000666586 Jy ! Component: 2250 - total flux cleaned = -0.000766598 Jy ! Component: 2300 - total flux cleaned = -0.000791316 Jy ! Component: 2350 - total flux cleaned = -0.000865203 Jy ! Component: 2400 - total flux cleaned = -0.00103548 Jy ! Component: 2450 - total flux cleaned = -0.00108334 Jy ! Component: 2500 - total flux cleaned = -0.00108326 Jy ! Component: 2550 - total flux cleaned = -0.00120197 Jy ! Component: 2600 - total flux cleaned = -0.00120218 Jy ! Component: 2650 - total flux cleaned = -0.00131847 Jy ! Component: 2700 - total flux cleaned = -0.00136432 Jy ! Component: 2750 - total flux cleaned = -0.00136431 Jy ! Component: 2800 - total flux cleaned = -0.00134143 Jy ! Component: 2850 - total flux cleaned = -0.00134149 Jy ! Component: 2900 - total flux cleaned = -0.00134146 Jy ! Component: 2950 - total flux cleaned = -0.00129681 Jy ! Component: 3000 - total flux cleaned = -0.00118635 Jy ! Component: 3050 - total flux cleaned = -0.00114247 Jy ! Component: 3100 - total flux cleaned = -0.00114255 Jy ! Component: 3150 - total flux cleaned = -0.00112098 Jy ! Component: 3200 - total flux cleaned = -0.00103533 Jy ! Component: 3250 - total flux cleaned = -0.00112067 Jy ! Component: 3300 - total flux cleaned = -0.0011419 Jy ! Component: 3350 - total flux cleaned = -0.00118392 Jy ! Component: 3400 - total flux cleaned = -0.00118383 Jy ! Component: 3450 - total flux cleaned = -0.00120471 Jy ! Component: 3500 - total flux cleaned = -0.0012254 Jy ! Component: 3550 - total flux cleaned = -0.00116366 Jy ! Component: 3600 - total flux cleaned = -0.00118406 Jy ! Component: 3650 - total flux cleaned = -0.00120432 Jy ! Component: 3700 - total flux cleaned = -0.00114406 Jy ! Component: 3750 - total flux cleaned = -0.0012041 Jy ! Component: 3800 - total flux cleaned = -0.00118435 Jy ! Component: 3850 - total flux cleaned = -0.00122388 Jy ! Component: 3900 - total flux cleaned = -0.0012043 Jy ! Component: 3950 - total flux cleaned = -0.00124342 Jy ! Component: 4000 - total flux cleaned = -0.00122395 Jy ! Component: 4050 - total flux cleaned = -0.00120446 Jy ! Total flux subtracted in 4096 components = -0.00116599 Jy ! Clean residual min=-0.001088 max=0.001195 Jy/beam ! Clean residual mean=-0.000005 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.332333 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 363 components and 0.332333 Jy ![Exited script file: muppet] wmap "J2313-3704_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.029 x 7.842 at 0.9393 degrees (North through East) ! Clean map min=-0.0024405 max=0.2438 Jy/beam ! Writing clean map to FITS file: J2313-3704_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.243801 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000350516 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.431314 0.431314 0.862628 1.72526 3.45051 6.90102 13.802 27.6041 55.2082 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.243 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.029 x 7.842 at 0.9393 degrees (North through East) ! Clean map min=-0.0024405 max=0.2438 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2313-3704_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:45:17 2019