! Started logfile: J2312+1615_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:51:07 2019 obs J2312+1615_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J2312+1615_S_2017_03_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.902924 visibilities/baseline/integration-bin. ! Found source: J2312+1615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 18528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2312+1615_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 542 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927818Jy sigma=0.008312 ! Fit after self-cal, rms=0.920680Jy sigma=0.008255 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=6.517 mas, bpa=-5.146 degrees ! Estimated noise=1020.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0640106 Jy ! Component: 100 - total flux cleaned = 0.0780162 Jy ! Total flux subtracted in 100 components = 0.0780162 Jy ! Clean residual min=-0.002766 max=0.004276 Jy/beam ! Clean residual mean=0.000000 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0780163 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0780163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079211Jy sigma=0.000669 ! Fit after self-cal, rms=0.079189Jy sigma=0.000669 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=7.269 mas, bpa=-2.922 degrees ! Estimated noise=646.837 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429771 Jy ! Component: 100 - total flux cleaned = 0.00584206 Jy ! Component: 150 - total flux cleaned = 0.00612378 Jy ! Component: 200 - total flux cleaned = 0.00612373 Jy ! Total flux subtracted in 200 components = 0.00612373 Jy ! Clean residual min=-0.001823 max=0.001986 Jy/beam ! Clean residual mean=0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.08414 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 22 components and 0.08414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078984Jy sigma=0.000667 ! Fit after self-cal, rms=0.078992Jy sigma=0.000667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.00 KP 1.04 ! LA 1.00 MK 1.02 NL 0.95 OV 1.04 ! PT 0.99 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.05 HN 1.02 KP 1.03 ! LA 0.94 MK 1.01 NL 0.99 OV 1.03 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.04 HN 0.98 KP 0.96 ! LA 0.97 MK 0.99 NL 1.03 OV 0.98 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.95 KP 1.00* ! LA 1.00* MK 1.06 NL 1.00* OV 1.05 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.078992Jy sigma=0.000667 ! Fit after self-cal, rms=0.078897Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=7.266 mas, bpa=-2.742 degrees ! Estimated noise=645.367 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240626 Jy ! Component: 100 - total flux cleaned = -0.000270801 Jy ! Component: 150 - total flux cleaned = -0.000283286 Jy ! Component: 200 - total flux cleaned = -0.000317139 Jy ! Total flux subtracted in 200 components = -0.000317139 Jy ! Clean residual min=-0.001757 max=0.001768 Jy/beam ! Clean residual mean=0.000000 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0838229 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0838229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078891Jy sigma=0.000666 ! Fit after self-cal, rms=0.078917Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078917Jy sigma=0.000666 ! Fit after self-cal, rms=0.080568Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=7.271 mas, bpa=-2.7 degrees ! Estimated noise=646.223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.75109e-05 Jy ! Component: 100 - total flux cleaned = -6.77992e-05 Jy ! Component: 150 - total flux cleaned = -6.79047e-05 Jy ! Component: 200 - total flux cleaned = -6.08903e-05 Jy ! Total flux subtracted in 200 components = -6.08903e-05 Jy ! Clean residual min=-0.001641 max=0.001844 Jy/beam ! Clean residual mean=-0.000003 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.083762 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.083762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080565Jy sigma=0.000664 ! Fit after self-cal, rms=0.080632Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (97.5, 122). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142197 Jy ! Component: 100 - total flux cleaned = 0.00152662 Jy ! Component: 150 - total flux cleaned = 0.00152751 Jy ! Component: 200 - total flux cleaned = 0.0015055 Jy ! Total flux subtracted in 200 components = 0.0015055 Jy ! Clean residual min=-0.001628 max=0.001551 Jy/beam ! Clean residual mean=-0.000001 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0852675 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.0852675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080594Jy sigma=0.000664 ! Fit after self-cal, rms=0.080587Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080587Jy sigma=0.000664 ! Fit after self-cal, rms=0.081175Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.446 mas, bmaj=7.265 mas, bpa=-2.586 degrees ! Estimated noise=646.549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000444942 Jy ! Component: 100 - total flux cleaned = 0.000425024 Jy ! Component: 150 - total flux cleaned = 0.000425002 Jy ! Component: 200 - total flux cleaned = 0.000441442 Jy ! Total flux subtracted in 200 components = 0.000441442 Jy ! Clean residual min=-0.001587 max=0.001495 Jy/beam ! Clean residual mean=-0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0857089 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.0857089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081162Jy sigma=0.000664 ! Fit after self-cal, rms=0.081178Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.97199e-05 Jy ! Component: 100 - total flux cleaned = 9.46236e-05 Jy ! Component: 150 - total flux cleaned = 0.000123983 Jy ! Component: 200 - total flux cleaned = 0.000151381 Jy ! Total flux subtracted in 200 components = 0.000151381 Jy ! Clean residual min=-0.001579 max=0.001481 Jy/beam ! Clean residual mean=-0.000003 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0858603 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.0858603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081172Jy sigma=0.000664 ! Fit after self-cal, rms=0.081172Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081172Jy sigma=0.000664 ! Fit after self-cal, rms=0.081201Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.77 mas, bmaj=10.54 mas, bpa=-0.322 degrees ! Estimated noise=785.636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151682 Jy ! Component: 100 - total flux cleaned = 0.000208915 Jy ! Component: 150 - total flux cleaned = 0.000220245 Jy ! Component: 200 - total flux cleaned = 0.000241113 Jy ! Total flux subtracted in 200 components = 0.000241113 Jy ! Clean residual min=-0.001325 max=0.001407 Jy/beam ! Clean residual mean=-0.000004 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0861014 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 81 components and 0.0861014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081200Jy sigma=0.000664 ! Fit after self-cal, rms=0.081205Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.73923e-06 Jy ! Component: 100 - total flux cleaned = 2.0545e-05 Jy ! Component: 150 - total flux cleaned = 4.88676e-05 Jy ! Component: 200 - total flux cleaned = 7.50049e-05 Jy ! Total flux subtracted in 200 components = 7.50049e-05 Jy ! Clean residual min=-0.001322 max=0.001413 Jy/beam ! Clean residual mean=-0.000004 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0861764 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 0.0861764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081205Jy sigma=0.000664 ! Fit after self-cal, rms=0.081206Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.446 mas, bmaj=7.26 mas, bpa=-2.536 degrees ! Estimated noise=646.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.446 x 7.26 at -2.536 degrees (North through East) ! Clean map min=-0.0014753 max=0.08271 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=6.497 mas, bpa=-4.473 degrees ! Estimated noise=1020.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.063889 Jy ! Component: 100 - total flux cleaned = 0.0778254 Jy ! Component: 150 - total flux cleaned = 0.0819156 Jy ! Component: 200 - total flux cleaned = 0.0837504 Jy ! Total flux subtracted in 200 components = 0.0837504 Jy ! Clean residual min=-0.002210 max=0.002295 Jy/beam ! Clean residual mean=-0.000001 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0837504 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0837504 Jy ! Inverting map and beam ! Estimated beam: bmin=3.446 mas, bmaj=7.26 mas, bpa=-2.536 degrees ! Estimated noise=646.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149168 Jy ! Component: 100 - total flux cleaned = 0.00203624 Jy ! Component: 150 - total flux cleaned = 0.00217705 Jy ! Component: 200 - total flux cleaned = 0.0021762 Jy ! Total flux subtracted in 200 components = 0.0021762 Jy ! Clean residual min=-0.001610 max=0.001593 Jy/beam ! Clean residual mean=-0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0859266 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 31 components and 0.0859266 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.77 mas, bmaj=10.54 mas, bpa=-0.322 degrees ! Estimated noise=785.636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142946 Jy ! Component: 100 - total flux cleaned = 0.000384223 Jy ! Component: 150 - total flux cleaned = 0.000423045 Jy ! Component: 200 - total flux cleaned = 0.000405616 Jy ! Total flux subtracted in 200 components = 0.000405616 Jy ! Clean residual min=-0.001350 max=0.001438 Jy/beam ! Clean residual mean=-0.000004 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0863322 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.07752e-07 Jy ! Component: 100 - total flux cleaned = -1.43668e-05 Jy ! Component: 150 - total flux cleaned = -1.4681e-05 Jy ! Component: 200 - total flux cleaned = -3.84139e-05 Jy ! Total flux subtracted in 200 components = -3.84139e-05 Jy ! Clean residual min=-0.001349 max=0.001434 Jy/beam ! Clean residual mean=-0.000004 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0862938 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.0862938 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.446 mas, bmaj=7.26 mas, bpa=-2.536 degrees ! Estimated noise=646.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.29139e-05 Jy ! Component: 100 - total flux cleaned = -0.00011727 Jy ! Component: 150 - total flux cleaned = -0.000116138 Jy ! Component: 200 - total flux cleaned = -0.000152262 Jy ! Total flux subtracted in 200 components = -0.000152262 Jy ! Clean residual min=-0.001552 max=0.001469 Jy/beam ! Clean residual mean=-0.000003 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0861415 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.0861415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081213Jy sigma=0.000664 ! Fit after self-cal, rms=0.081214Jy sigma=0.000664 wmodel J2312+1615_S_2017_03_27_pus_map.mod ! Writing 62 model components to file: J2312+1615_S_2017_03_27_pus_map.mod wobs J2312+1615_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J2312+1615_S_2017_03_27_pus_uvs.fits wwins J2312+1615_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J2312+1615_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000358092 Jy ! Component: 100 - total flux cleaned = -0.000584757 Jy ! Component: 150 - total flux cleaned = -0.000751937 Jy ! Component: 200 - total flux cleaned = -0.000843764 Jy ! Component: 250 - total flux cleaned = -0.000910884 Jy ! Component: 300 - total flux cleaned = -0.000975973 Jy ! Component: 350 - total flux cleaned = -0.00101856 Jy ! Component: 400 - total flux cleaned = -0.0010397 Jy ! Component: 450 - total flux cleaned = -0.00108081 Jy ! Component: 500 - total flux cleaned = -0.00110095 Jy ! Component: 550 - total flux cleaned = -0.00112084 Jy ! Component: 600 - total flux cleaned = -0.00115979 Jy ! Component: 650 - total flux cleaned = -0.00114067 Jy ! Component: 700 - total flux cleaned = -0.0012162 Jy ! Component: 750 - total flux cleaned = -0.00123465 Jy ! Component: 800 - total flux cleaned = -0.00125313 Jy ! Component: 850 - total flux cleaned = -0.00127153 Jy ! Component: 900 - total flux cleaned = -0.00136082 Jy ! Component: 950 - total flux cleaned = -0.0013431 Jy ! Component: 1000 - total flux cleaned = -0.00132616 Jy ! Component: 1050 - total flux cleaned = -0.00141288 Jy ! Component: 1100 - total flux cleaned = -0.00143009 Jy ! Component: 1150 - total flux cleaned = -0.00148048 Jy ! Component: 1200 - total flux cleaned = -0.00153081 Jy ! Component: 1250 - total flux cleaned = -0.00158071 Jy ! Component: 1300 - total flux cleaned = -0.00166263 Jy ! Component: 1350 - total flux cleaned = -0.00167899 Jy ! Component: 1400 - total flux cleaned = -0.00175926 Jy ! Component: 1450 - total flux cleaned = -0.00182286 Jy ! Component: 1500 - total flux cleaned = -0.00186995 Jy ! Component: 1550 - total flux cleaned = -0.00190126 Jy ! Component: 1600 - total flux cleaned = -0.00196313 Jy ! Component: 1650 - total flux cleaned = -0.00199391 Jy ! Component: 1700 - total flux cleaned = -0.00213062 Jy ! Component: 1750 - total flux cleaned = -0.00214558 Jy ! Component: 1800 - total flux cleaned = -0.00217555 Jy ! Component: 1850 - total flux cleaned = -0.00216098 Jy ! Component: 1900 - total flux cleaned = -0.00221982 Jy ! Component: 1950 - total flux cleaned = -0.00223456 Jy ! Component: 2000 - total flux cleaned = -0.00224899 Jy ! Component: 2050 - total flux cleaned = -0.00224903 Jy ! Component: 2100 - total flux cleaned = -0.00229176 Jy ! Component: 2150 - total flux cleaned = -0.00230602 Jy ! Component: 2200 - total flux cleaned = -0.00227807 Jy ! Component: 2250 - total flux cleaned = -0.00233369 Jy ! Component: 2300 - total flux cleaned = -0.00234752 Jy ! Component: 2350 - total flux cleaned = -0.00241612 Jy ! Component: 2400 - total flux cleaned = -0.0024569 Jy ! Component: 2450 - total flux cleaned = -0.00241642 Jy ! Component: 2500 - total flux cleaned = -0.00248354 Jy ! Component: 2550 - total flux cleaned = -0.0024435 Jy ! Component: 2600 - total flux cleaned = -0.00248329 Jy ! Component: 2650 - total flux cleaned = -0.002457 Jy ! Component: 2700 - total flux cleaned = -0.00247006 Jy ! Component: 2750 - total flux cleaned = -0.00250908 Jy ! Component: 2800 - total flux cleaned = -0.00250906 Jy ! Component: 2850 - total flux cleaned = -0.00249633 Jy ! Component: 2900 - total flux cleaned = -0.00252182 Jy ! Component: 2950 - total flux cleaned = -0.00258524 Jy ! Component: 3000 - total flux cleaned = -0.00261038 Jy ! Component: 3050 - total flux cleaned = -0.00268521 Jy ! Component: 3100 - total flux cleaned = -0.00272245 Jy ! Component: 3150 - total flux cleaned = -0.00275939 Jy ! Component: 3200 - total flux cleaned = -0.00280827 Jy ! Component: 3250 - total flux cleaned = -0.00283274 Jy ! Component: 3300 - total flux cleaned = -0.00288119 Jy ! Component: 3350 - total flux cleaned = -0.00291733 Jy ! Component: 3400 - total flux cleaned = -0.00296516 Jy ! Component: 3450 - total flux cleaned = -0.00301266 Jy ! Component: 3500 - total flux cleaned = -0.00301276 Jy ! Component: 3550 - total flux cleaned = -0.00307163 Jy ! Component: 3600 - total flux cleaned = -0.00310669 Jy ! Component: 3650 - total flux cleaned = -0.00314147 Jy ! Component: 3700 - total flux cleaned = -0.0031877 Jy ! Component: 3750 - total flux cleaned = -0.00319921 Jy ! Component: 3800 - total flux cleaned = -0.00318765 Jy ! Component: 3850 - total flux cleaned = -0.00327874 Jy ! Component: 3900 - total flux cleaned = -0.00332402 Jy ! Component: 3950 - total flux cleaned = -0.00334662 Jy ! Component: 4000 - total flux cleaned = -0.00333542 Jy ! Component: 4050 - total flux cleaned = -0.00333545 Jy ! Total flux subtracted in 4096 components = -0.00345759 Jy ! Clean residual min=-0.000639 max=0.000639 Jy/beam ! Clean residual mean=-0.000002 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0826839 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 360 components and 0.0826839 Jy ![Exited script file: muppet] wmap "J2312+1615_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.446 x 7.26 at -2.536 degrees (North through East) ! Clean map min=-0.0013242 max=0.082626 Jy/beam ! Writing clean map to FITS file: J2312+1615_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0826259 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205824 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.747308 0.747308 1.49462 2.98923 5.97847 11.9569 23.9139 47.8277 95.6555 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.446 x 7.26 at -2.536 degrees (North through East) ! Clean map min=-0.0013242 max=0.082626 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2312+1615_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:51:12 2019