! Started logfile: J2311-1306_S_2017_03_23_pus_uvs.log on Mon May 13 10:11:11 2019 obs J2311-1306_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2311-1306_S_2017_03_23_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.790895 visibilities/baseline/integration-bin. ! Found source: J2311-1306 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 20500 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2311-1306_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 499 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878425Jy sigma=0.006212 ! Fit after self-cal, rms=0.849231Jy sigma=0.006015 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=6.733 mas, bpa=-5.691 degrees ! Estimated noise=1044.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111064 Jy ! Component: 100 - total flux cleaned = 0.144743 Jy ! Total flux subtracted in 100 components = 0.144743 Jy ! Clean residual min=-0.010021 max=0.019700 Jy/beam ! Clean residual mean=-0.000011 rms=0.002360 Jy/beam ! Combined flux in latest and established models = 0.144743 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.144743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122187Jy sigma=0.000788 ! Fit after self-cal, rms=0.122140Jy sigma=0.000788 ! Inverting map ! Added new window around map position (-4, 20). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208326 Jy ! Component: 100 - total flux cleaned = 0.0346983 Jy ! Total flux subtracted in 100 components = 0.0346983 Jy ! Clean residual min=-0.007134 max=0.010627 Jy/beam ! Clean residual mean=-0.000010 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 0.179441 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.179441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116257Jy sigma=0.000746 ! Fit after self-cal, rms=0.116002Jy sigma=0.000744 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118948 Jy ! Component: 100 - total flux cleaned = 0.0201759 Jy ! Total flux subtracted in 100 components = 0.0201759 Jy ! Clean residual min=-0.005685 max=0.010369 Jy/beam ! Clean residual mean=-0.000008 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.199617 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 37 components and 0.199617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113723Jy sigma=0.000728 ! Fit after self-cal, rms=0.113633Jy sigma=0.000727 ! Inverting map ! Added new window around map position (-4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00971912 Jy ! Component: 100 - total flux cleaned = 0.0158848 Jy ! Total flux subtracted in 100 components = 0.0158848 Jy ! Clean residual min=-0.005268 max=0.006780 Jy/beam ! Clean residual mean=-0.000007 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.215502 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 60 components and 0.215502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112171Jy sigma=0.000718 ! Fit after self-cal, rms=0.112118Jy sigma=0.000717 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=7.554 mas, bpa=-4.8 degrees ! Estimated noise=761.043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100171 Jy ! Component: 100 - total flux cleaned = 0.016955 Jy ! Component: 150 - total flux cleaned = 0.0222118 Jy ! Component: 200 - total flux cleaned = 0.0263115 Jy ! Total flux subtracted in 200 components = 0.0263115 Jy ! Clean residual min=-0.006026 max=0.006944 Jy/beam ! Clean residual mean=0.000008 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.241813 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 91 components and 0.241813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110711Jy sigma=0.000710 ! Fit after self-cal, rms=0.110666Jy sigma=0.000709 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.89 HN 0.98 KP 1.02 ! LA 0.96 MK 1.00 NL 0.88 OV 1.01 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.93 HN 1.02 KP 0.99 ! LA 0.93 MK 0.99 NL 1.25 OV 1.04 ! PT 0.96 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.02 KP 0.88 ! LA 0.73 MK 1.02 NL 1.35 OV 0.98 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.09 HN 0.98 KP 1.00* ! LA 0.75 MK 1.15 NL 1.00* OV 1.40 ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.110666Jy sigma=0.000709 ! Fit after self-cal, rms=0.110350Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.639 mas, bpa=-4.521 degrees ! Estimated noise=764.156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337384 Jy ! Component: 100 - total flux cleaned = 0.00355347 Jy ! Component: 150 - total flux cleaned = 0.00388157 Jy ! Component: 200 - total flux cleaned = 0.00409828 Jy ! Total flux subtracted in 200 components = 0.00409828 Jy ! Clean residual min=-0.003676 max=0.003800 Jy/beam ! Clean residual mean=0.000011 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.245912 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 110 components and 0.245912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110141Jy sigma=0.000683 ! Fit after self-cal, rms=0.110158Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110158Jy sigma=0.000682 ! Fit after self-cal, rms=0.107633Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=7.616 mas, bpa=-4.632 degrees ! Estimated noise=761.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111602 Jy ! Component: 100 - total flux cleaned = 0.00170081 Jy ! Component: 150 - total flux cleaned = 0.00207446 Jy ! Component: 200 - total flux cleaned = 0.00213961 Jy ! Total flux subtracted in 200 components = 0.00213961 Jy ! Clean residual min=-0.002067 max=0.004104 Jy/beam ! Clean residual mean=0.000004 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.248051 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 0.248051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107596Jy sigma=0.000677 ! Fit after self-cal, rms=0.107586Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, 53.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345524 Jy ! Component: 100 - total flux cleaned = 0.00483246 Jy ! Component: 150 - total flux cleaned = 0.00525909 Jy ! Component: 200 - total flux cleaned = 0.00548021 Jy ! Total flux subtracted in 200 components = 0.00548021 Jy ! Clean residual min=-0.002008 max=0.002155 Jy/beam ! Clean residual mean=0.000003 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.253531 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 154 components and 0.253531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107483Jy sigma=0.000676 ! Fit after self-cal, rms=0.107471Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107471Jy sigma=0.000676 ! Fit after self-cal, rms=0.106179Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=7.618 mas, bpa=-4.656 degrees ! Estimated noise=759.285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128439 Jy ! Component: 100 - total flux cleaned = 0.00184978 Jy ! Component: 150 - total flux cleaned = 0.00227108 Jy ! Component: 200 - total flux cleaned = 0.00255758 Jy ! Total flux subtracted in 200 components = 0.00255758 Jy ! Clean residual min=-0.001919 max=0.001965 Jy/beam ! Clean residual mean=-0.000001 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.256089 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 178 components and 0.256089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106154Jy sigma=0.000674 ! Fit after self-cal, rms=0.106146Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-85.5, 105.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166154 Jy ! Component: 100 - total flux cleaned = 0.00181688 Jy ! Component: 150 - total flux cleaned = 0.00184921 Jy ! Component: 200 - total flux cleaned = 0.00200075 Jy ! Total flux subtracted in 200 components = 0.00200075 Jy ! Clean residual min=-0.001918 max=0.001727 Jy/beam ! Clean residual mean=-0.000002 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.25809 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 195 components and 0.25809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106107Jy sigma=0.000674 ! Fit after self-cal, rms=0.106105Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106105Jy sigma=0.000674 ! Fit after self-cal, rms=0.105627Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.301 mas, bmaj=14.23 mas, bpa=3.13 degrees ! Estimated noise=970.806 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011635 Jy ! Component: 100 - total flux cleaned = 0.00184456 Jy ! Component: 150 - total flux cleaned = 0.00214445 Jy ! Component: 200 - total flux cleaned = 0.00236179 Jy ! Total flux subtracted in 200 components = 0.00236179 Jy ! Clean residual min=-0.001496 max=0.001843 Jy/beam ! Clean residual mean=-0.000005 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.260452 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 222 components and 0.260452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105618Jy sigma=0.000674 ! Fit after self-cal, rms=0.105613Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341852 Jy ! Component: 100 - total flux cleaned = 0.000470095 Jy ! Component: 150 - total flux cleaned = 0.000529108 Jy ! Component: 200 - total flux cleaned = 0.00056643 Jy ! Total flux subtracted in 200 components = 0.00056643 Jy ! Clean residual min=-0.001448 max=0.001824 Jy/beam ! Clean residual mean=-0.000005 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.261018 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 236 components and 0.261018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105609Jy sigma=0.000674 ! Fit after self-cal, rms=0.105609Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.612 mas, bpa=-4.729 degrees ! Estimated noise=757.599 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.612 at -4.729 degrees (North through East) ! Clean map min=-0.0017883 max=0.14754 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.54 mas, bmaj=6.73 mas, bpa=-5.533 degrees ! Estimated noise=1049.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110275 Jy ! Component: 100 - total flux cleaned = 0.14706 Jy ! Component: 150 - total flux cleaned = 0.169835 Jy ! Component: 200 - total flux cleaned = 0.186121 Jy ! Total flux subtracted in 200 components = 0.186121 Jy ! Clean residual min=-0.005572 max=0.009563 Jy/beam ! Clean residual mean=-0.000003 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.186121 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.186121 Jy ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.612 mas, bpa=-4.729 degrees ! Estimated noise=757.599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175938 Jy ! Component: 100 - total flux cleaned = 0.0293775 Jy ! Component: 150 - total flux cleaned = 0.0376695 Jy ! Component: 200 - total flux cleaned = 0.0438342 Jy ! Total flux subtracted in 200 components = 0.0438342 Jy ! Clean residual min=-0.003092 max=0.003651 Jy/beam ! Clean residual mean=-0.000001 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.229955 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 66 components and 0.229955 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.301 mas, bmaj=14.23 mas, bpa=3.13 degrees ! Estimated noise=970.806 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073531 Jy ! Component: 100 - total flux cleaned = 0.0123026 Jy ! Component: 150 - total flux cleaned = 0.0158882 Jy ! Component: 200 - total flux cleaned = 0.0186552 Jy ! Total flux subtracted in 200 components = 0.0186552 Jy ! Clean residual min=-0.002302 max=0.002846 Jy/beam ! Clean residual mean=-0.000003 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.24861 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222972 Jy ! Component: 100 - total flux cleaned = 0.00406402 Jy ! Component: 150 - total flux cleaned = 0.00559314 Jy ! Component: 200 - total flux cleaned = 0.0068735 Jy ! Total flux subtracted in 200 components = 0.0068735 Jy ! Clean residual min=-0.001786 max=0.002263 Jy/beam ! Clean residual mean=-0.000005 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.255484 Jy ! Adding 112 model components to the UV plane model. ! The established model now contains 172 components and 0.255484 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.612 mas, bpa=-4.729 degrees ! Estimated noise=757.599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130018 Jy ! Component: 100 - total flux cleaned = 0.00194862 Jy ! Component: 150 - total flux cleaned = 0.00253237 Jy ! Component: 200 - total flux cleaned = 0.00296708 Jy ! Total flux subtracted in 200 components = 0.00296708 Jy ! Clean residual min=-0.001964 max=0.001807 Jy/beam ! Clean residual mean=-0.000002 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.258451 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 202 components and 0.258451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105660Jy sigma=0.000674 ! Fit after self-cal, rms=0.105637Jy sigma=0.000674 wmodel J2311-1306_S_2017_03_23_pus_map.mod ! Writing 202 model components to file: J2311-1306_S_2017_03_23_pus_map.mod wobs J2311-1306_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2311-1306_S_2017_03_23_pus_uvs.fits wwins J2311-1306_S_2017_03_23_pus_map.win ! wwins: Wrote 6 windows to J2311-1306_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000577949 Jy ! Component: 100 - total flux cleaned = -0.000641023 Jy ! Component: 150 - total flux cleaned = -0.000640323 Jy ! Component: 200 - total flux cleaned = -0.000611823 Jy ! Component: 250 - total flux cleaned = -0.000695004 Jy ! Component: 300 - total flux cleaned = -0.00083069 Jy ! Component: 350 - total flux cleaned = -0.00101623 Jy ! Component: 400 - total flux cleaned = -0.00119769 Jy ! Component: 450 - total flux cleaned = -0.00140113 Jy ! Component: 500 - total flux cleaned = -0.00150105 Jy ! Component: 550 - total flux cleaned = -0.00164823 Jy ! Component: 600 - total flux cleaned = -0.00172006 Jy ! Component: 650 - total flux cleaned = -0.00179102 Jy ! Component: 700 - total flux cleaned = -0.00186092 Jy ! Component: 750 - total flux cleaned = -0.00202179 Jy ! Component: 800 - total flux cleaned = -0.00206651 Jy ! Component: 850 - total flux cleaned = -0.00211104 Jy ! Component: 900 - total flux cleaned = -0.00213317 Jy ! Component: 950 - total flux cleaned = -0.00217697 Jy ! Component: 1000 - total flux cleaned = -0.00226314 Jy ! Component: 1050 - total flux cleaned = -0.00230556 Jy ! Component: 1100 - total flux cleaned = -0.00241096 Jy ! Component: 1150 - total flux cleaned = -0.00241066 Jy ! Component: 1200 - total flux cleaned = -0.0025342 Jy ! Component: 1250 - total flux cleaned = -0.00255437 Jy ! Component: 1300 - total flux cleaned = -0.00265559 Jy ! Component: 1350 - total flux cleaned = -0.00271555 Jy ! Component: 1400 - total flux cleaned = -0.00275499 Jy ! Component: 1450 - total flux cleaned = -0.0027745 Jy ! Component: 1500 - total flux cleaned = -0.00285236 Jy ! Component: 1550 - total flux cleaned = -0.00289104 Jy ! Component: 1600 - total flux cleaned = -0.00292925 Jy ! Component: 1650 - total flux cleaned = -0.00296708 Jy ! Component: 1700 - total flux cleaned = -0.00307953 Jy ! Component: 1750 - total flux cleaned = -0.0030797 Jy ! Component: 1800 - total flux cleaned = -0.00319024 Jy ! Component: 1850 - total flux cleaned = -0.00315378 Jy ! Component: 1900 - total flux cleaned = -0.00313558 Jy ! Component: 1950 - total flux cleaned = -0.00313586 Jy ! Component: 2000 - total flux cleaned = -0.00310023 Jy ! Component: 2050 - total flux cleaned = -0.00313594 Jy ! Component: 2100 - total flux cleaned = -0.00318891 Jy ! Component: 2150 - total flux cleaned = -0.00320611 Jy ! Component: 2200 - total flux cleaned = -0.00320602 Jy ! Component: 2250 - total flux cleaned = -0.00318879 Jy ! Component: 2300 - total flux cleaned = -0.00322309 Jy ! Component: 2350 - total flux cleaned = -0.00320599 Jy ! Component: 2400 - total flux cleaned = -0.00313871 Jy ! Component: 2450 - total flux cleaned = -0.00318933 Jy ! Component: 2500 - total flux cleaned = -0.00315617 Jy ! Component: 2550 - total flux cleaned = -0.00312316 Jy ! Component: 2600 - total flux cleaned = -0.00309044 Jy ! Component: 2650 - total flux cleaned = -0.00317224 Jy ! Component: 2700 - total flux cleaned = -0.0030419 Jy ! Component: 2750 - total flux cleaned = -0.00302566 Jy ! Component: 2800 - total flux cleaned = -0.00304165 Jy ! Component: 2850 - total flux cleaned = -0.0029617 Jy ! Component: 2900 - total flux cleaned = -0.00296174 Jy ! Component: 2950 - total flux cleaned = -0.00291451 Jy ! Component: 3000 - total flux cleaned = -0.00291458 Jy ! Component: 3050 - total flux cleaned = -0.00289895 Jy ! Component: 3100 - total flux cleaned = -0.00283704 Jy ! Component: 3150 - total flux cleaned = -0.00288326 Jy ! Component: 3200 - total flux cleaned = -0.00279132 Jy ! Component: 3250 - total flux cleaned = -0.00282183 Jy ! Component: 3300 - total flux cleaned = -0.00279151 Jy ! Component: 3350 - total flux cleaned = -0.00274639 Jy ! Component: 3400 - total flux cleaned = -0.00280629 Jy ! Component: 3450 - total flux cleaned = -0.00282118 Jy ! Component: 3500 - total flux cleaned = -0.00282116 Jy ! Component: 3550 - total flux cleaned = -0.00276203 Jy ! Component: 3600 - total flux cleaned = -0.00274744 Jy ! Component: 3650 - total flux cleaned = -0.00277674 Jy ! Component: 3700 - total flux cleaned = -0.00279124 Jy ! Component: 3750 - total flux cleaned = -0.00280571 Jy ! Component: 3800 - total flux cleaned = -0.00286302 Jy ! Component: 3850 - total flux cleaned = -0.00282014 Jy ! Component: 3900 - total flux cleaned = -0.00286284 Jy ! Component: 3950 - total flux cleaned = -0.00286276 Jy ! Component: 4000 - total flux cleaned = -0.00286275 Jy ! Component: 4050 - total flux cleaned = -0.00286282 Jy ! Total flux subtracted in 4096 components = -0.00284892 Jy ! Clean residual min=-0.000864 max=0.000824 Jy/beam ! Clean residual mean=-0.000001 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.255602 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 473 components and 0.255602 Jy ![Exited script file: muppet] wmap "J2311-1306_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.612 at -4.729 degrees (North through East) ! Clean map min=-0.0015877 max=0.14848 Jy/beam ! Writing clean map to FITS file: J2311-1306_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.148478 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254406 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.514027 0.514027 1.02805 2.05611 4.11222 8.22444 16.4489 32.8978 65.7955 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.612 at -4.729 degrees (North through East) ! Clean map min=-0.0015877 max=0.14848 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2311-1306_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:11:18 2019