! Started logfile: J2309-0458_S_2017_10_21_pus_uvs.log on Sat May 11 21:07:47 2019 obs J2309-0458_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2309-0458_S_2017_10_21_pus_uva.fits ! AN table 1: 234 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.947531 visibilities/baseline/integration-bin. ! Found source: J2309-0458 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 31928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2309-0458_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 291 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1072 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.954471Jy sigma=0.009182 ! Fit after self-cal, rms=0.939128Jy sigma=0.009038 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=15.64 mas, bpa=-17 degrees ! Estimated noise=1170.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0486458 Jy ! Component: 100 - total flux cleaned = 0.0592575 Jy ! Total flux subtracted in 100 components = 0.0592575 Jy ! Clean residual min=-0.004237 max=0.003959 Jy/beam ! Clean residual mean=0.000005 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.0592575 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0592575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081946Jy sigma=0.000714 ! Fit after self-cal, rms=0.081819Jy sigma=0.000713 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=17.23 mas, bpa=-16.92 degrees ! Estimated noise=492.056 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412164 Jy ! Component: 100 - total flux cleaned = 0.00588712 Jy ! Component: 150 - total flux cleaned = 0.00653231 Jy ! Component: 200 - total flux cleaned = 0.0067092 Jy ! Total flux subtracted in 200 components = 0.0067092 Jy ! Clean residual min=-0.002141 max=0.002062 Jy/beam ! Clean residual mean=0.000009 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0659667 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 30 components and 0.0659667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081575Jy sigma=0.000712 ! Fit after self-cal, rms=0.081563Jy sigma=0.000712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.00 KP 1.15 ! LA 1.02 MK 1.02 NL 0.96 OV 1.01 ! PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00 KP 1.10 ! LA 0.98 MK 1.03 NL 1.07 OV 1.09 ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.06 HN 1.01 KP 1.11 ! LA 0.81 MK 1.03 NL 1.15 OV 0.96 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.88 KP 1.00* ! LA 1.00 MK 0.92 NL 1.00* OV 1.00* ! PT 0.81 ! ! ! Fit before self-cal, rms=0.081563Jy sigma=0.000712 ! Fit after self-cal, rms=0.078270Jy sigma=0.000708 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=17.04 mas, bpa=-16.81 degrees ! Estimated noise=490.483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00025783 Jy ! Component: 100 - total flux cleaned = -0.000323672 Jy ! Component: 150 - total flux cleaned = -0.000378662 Jy ! Component: 200 - total flux cleaned = -0.000410836 Jy ! Total flux subtracted in 200 components = -0.000410836 Jy ! Clean residual min=-0.001559 max=0.001443 Jy/beam ! Clean residual mean=0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0655559 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.0655559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078267Jy sigma=0.000708 ! Fit after self-cal, rms=0.078296Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078296Jy sigma=0.000708 ! Fit after self-cal, rms=0.078209Jy sigma=0.000707 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=17.04 mas, bpa=-16.84 degrees ! Estimated noise=490.515 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019553 Jy ! Component: 100 - total flux cleaned = -0.000297496 Jy ! Component: 150 - total flux cleaned = -0.000389395 Jy ! Component: 200 - total flux cleaned = -0.000472682 Jy ! Total flux subtracted in 200 components = -0.000472682 Jy ! Clean residual min=-0.001490 max=0.001278 Jy/beam ! Clean residual mean=0.000003 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0650832 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0650832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078206Jy sigma=0.000707 ! Fit after self-cal, rms=0.078244Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.48264e-05 Jy ! Component: 100 - total flux cleaned = -2.03563e-05 Jy ! Component: 150 - total flux cleaned = -4.27551e-05 Jy ! Component: 200 - total flux cleaned = -4.78447e-05 Jy ! Total flux subtracted in 200 components = -4.78447e-05 Jy ! Clean residual min=-0.001533 max=0.001283 Jy/beam ! Clean residual mean=0.000003 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0650353 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.0650353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078242Jy sigma=0.000707 ! Fit after self-cal, rms=0.078241Jy sigma=0.000707 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078241Jy sigma=0.000707 ! Fit after self-cal, rms=0.078424Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=17.06 mas, bpa=-16.87 degrees ! Estimated noise=490.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185539 Jy ! Component: 100 - total flux cleaned = -0.000261977 Jy ! Component: 150 - total flux cleaned = -0.000311399 Jy ! Component: 200 - total flux cleaned = -0.000335606 Jy ! Total flux subtracted in 200 components = -0.000335606 Jy ! Clean residual min=-0.001476 max=0.001257 Jy/beam ! Clean residual mean=0.000003 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0646997 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.0646997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078422Jy sigma=0.000707 ! Fit after self-cal, rms=0.078442Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.44913e-05 Jy ! Component: 100 - total flux cleaned = -4.14879e-05 Jy ! Component: 150 - total flux cleaned = -6.09876e-05 Jy ! Component: 200 - total flux cleaned = -6.55881e-05 Jy ! Total flux subtracted in 200 components = -6.55881e-05 Jy ! Clean residual min=-0.001493 max=0.001253 Jy/beam ! Clean residual mean=0.000003 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0646341 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.0646341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078441Jy sigma=0.000707 ! Fit after self-cal, rms=0.078442Jy sigma=0.000707 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078442Jy sigma=0.000707 ! Fit after self-cal, rms=0.078573Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.727 mas, bmaj=17.96 mas, bpa=-9.79 degrees ! Estimated noise=588.004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129722 Jy ! Component: 100 - total flux cleaned = -0.000156599 Jy ! Component: 150 - total flux cleaned = -0.000145076 Jy ! Component: 200 - total flux cleaned = -0.000139446 Jy ! Total flux subtracted in 200 components = -0.000139446 Jy ! Clean residual min=-0.001670 max=0.001665 Jy/beam ! Clean residual mean=0.000005 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0644947 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.0644947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078573Jy sigma=0.000707 ! Fit after self-cal, rms=0.078587Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.7286e-05 Jy ! Component: 100 - total flux cleaned = 3.2717e-05 Jy ! Component: 150 - total flux cleaned = 3.78094e-05 Jy ! Component: 200 - total flux cleaned = 4.26072e-05 Jy ! Total flux subtracted in 200 components = 4.26072e-05 Jy ! Clean residual min=-0.001677 max=0.001651 Jy/beam ! Clean residual mean=0.000005 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0645373 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.0645373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078587Jy sigma=0.000707 ! Fit after self-cal, rms=0.078588Jy sigma=0.000707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=17.08 mas, bpa=-16.89 degrees ! Estimated noise=490.852 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 17.08 at -16.89 degrees (North through East) ! Clean map min=-0.0014391 max=0.062681 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=15.38 mas, bpa=-17 degrees ! Estimated noise=1170.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048502 Jy ! Component: 100 - total flux cleaned = 0.059079 Jy ! Component: 150 - total flux cleaned = 0.0617722 Jy ! Component: 200 - total flux cleaned = 0.0627188 Jy ! Total flux subtracted in 200 components = 0.0627188 Jy ! Clean residual min=-0.003109 max=0.003363 Jy/beam ! Clean residual mean=0.000003 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.0627188 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0627188 Jy ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=17.08 mas, bpa=-16.89 degrees ! Estimated noise=490.852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173893 Jy ! Component: 100 - total flux cleaned = 0.00182876 Jy ! Component: 150 - total flux cleaned = 0.0018028 Jy ! Component: 200 - total flux cleaned = 0.00173804 Jy ! Total flux subtracted in 200 components = 0.00173804 Jy ! Clean residual min=-0.001528 max=0.001305 Jy/beam ! Clean residual mean=0.000003 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0644569 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 36 components and 0.0644569 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.727 mas, bmaj=17.96 mas, bpa=-9.79 degrees ! Estimated noise=588.004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257646 Jy ! Component: 100 - total flux cleaned = 0.000259311 Jy ! Component: 150 - total flux cleaned = 0.000236134 Jy ! Component: 200 - total flux cleaned = 0.000214943 Jy ! Total flux subtracted in 200 components = 0.000214943 Jy ! Clean residual min=-0.001684 max=0.001633 Jy/beam ! Clean residual mean=0.000005 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0646718 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.84798e-05 Jy ! Component: 100 - total flux cleaned = -2.67477e-05 Jy ! Component: 150 - total flux cleaned = -3.41812e-05 Jy ! Component: 200 - total flux cleaned = -4.81931e-05 Jy ! Total flux subtracted in 200 components = -4.81931e-05 Jy ! Clean residual min=-0.001683 max=0.001616 Jy/beam ! Clean residual mean=0.000005 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0646236 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 61 components and 0.0646236 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=17.08 mas, bpa=-16.89 degrees ! Estimated noise=490.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.92747e-05 Jy ! Component: 100 - total flux cleaned = -5.00794e-06 Jy ! Component: 150 - total flux cleaned = -7.04027e-05 Jy ! Component: 200 - total flux cleaned = -0.000119789 Jy ! Total flux subtracted in 200 components = -0.000119789 Jy ! Clean residual min=-0.001497 max=0.001280 Jy/beam ! Clean residual mean=0.000003 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.0645038 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.0645038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078588Jy sigma=0.000707 ! Fit after self-cal, rms=0.078590Jy sigma=0.000707 wmodel J2309-0458_S_2017_10_21_pus_map.mod ! Writing 76 model components to file: J2309-0458_S_2017_10_21_pus_map.mod wobs J2309-0458_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2309-0458_S_2017_10_21_pus_uvs.fits wwins J2309-0458_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2309-0458_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150214 Jy ! Component: 100 - total flux cleaned = -0.000106534 Jy ! Component: 150 - total flux cleaned = -6.59762e-05 Jy ! Component: 200 - total flux cleaned = -0.000122513 Jy ! Component: 250 - total flux cleaned = -0.000159107 Jy ! Component: 300 - total flux cleaned = -0.000246594 Jy ! Component: 350 - total flux cleaned = -0.000381465 Jy ! Component: 400 - total flux cleaned = -0.000512282 Jy ! Component: 450 - total flux cleaned = -0.000670826 Jy ! Component: 500 - total flux cleaned = -0.000824917 Jy ! Component: 550 - total flux cleaned = -0.000900119 Jy ! Component: 600 - total flux cleaned = -0.00103249 Jy ! Component: 650 - total flux cleaned = -0.00113287 Jy ! Component: 700 - total flux cleaned = -0.001203 Jy ! Component: 750 - total flux cleaned = -0.00128537 Jy ! Component: 800 - total flux cleaned = -0.00133904 Jy ! Component: 850 - total flux cleaned = -0.00139155 Jy ! Component: 900 - total flux cleaned = -0.00145579 Jy ! Component: 950 - total flux cleaned = -0.00149333 Jy ! Component: 1000 - total flux cleaned = -0.00151807 Jy ! Component: 1050 - total flux cleaned = -0.00156639 Jy ! Component: 1100 - total flux cleaned = -0.00157811 Jy ! Component: 1150 - total flux cleaned = -0.0015898 Jy ! Component: 1200 - total flux cleaned = -0.00162419 Jy ! Component: 1250 - total flux cleaned = -0.00163519 Jy ! Component: 1300 - total flux cleaned = -0.00166808 Jy ! Component: 1350 - total flux cleaned = -0.00166785 Jy ! Component: 1400 - total flux cleaned = -0.00171066 Jy ! Component: 1450 - total flux cleaned = -0.00175257 Jy ! Component: 1500 - total flux cleaned = -0.00180396 Jy ! Component: 1550 - total flux cleaned = -0.00178365 Jy ! Component: 1600 - total flux cleaned = -0.00183402 Jy ! Component: 1650 - total flux cleaned = -0.00186373 Jy ! Component: 1700 - total flux cleaned = -0.00189308 Jy ! Component: 1750 - total flux cleaned = -0.00192199 Jy ! Component: 1800 - total flux cleaned = -0.00195049 Jy ! Component: 1850 - total flux cleaned = -0.00196908 Jy ! Component: 1900 - total flux cleaned = -0.00195982 Jy ! Component: 1950 - total flux cleaned = -0.00200579 Jy ! Component: 2000 - total flux cleaned = -0.002051 Jy ! Component: 2050 - total flux cleaned = -0.00205106 Jy ! Component: 2100 - total flux cleaned = -0.00211305 Jy ! Component: 2150 - total flux cleaned = -0.00213067 Jy ! Component: 2200 - total flux cleaned = -0.00219122 Jy ! Component: 2250 - total flux cleaned = -0.00219129 Jy ! Component: 2300 - total flux cleaned = -0.00224205 Jy ! Component: 2350 - total flux cleaned = -0.00228397 Jy ! Component: 2400 - total flux cleaned = -0.00230066 Jy ! Component: 2450 - total flux cleaned = -0.00233353 Jy ! Component: 2500 - total flux cleaned = -0.0023579 Jy ! Component: 2550 - total flux cleaned = -0.00239006 Jy ! Component: 2600 - total flux cleaned = -0.00242967 Jy ! Component: 2650 - total flux cleaned = -0.00243767 Jy ! Component: 2700 - total flux cleaned = -0.00244548 Jy ! Component: 2750 - total flux cleaned = -0.00244548 Jy ! Component: 2800 - total flux cleaned = -0.00247596 Jy ! Component: 2850 - total flux cleaned = -0.00246836 Jy ! Component: 2900 - total flux cleaned = -0.00249077 Jy ! Component: 2950 - total flux cleaned = -0.00251295 Jy ! Component: 3000 - total flux cleaned = -0.00251289 Jy ! Component: 3050 - total flux cleaned = -0.00250564 Jy ! Component: 3100 - total flux cleaned = -0.00253453 Jy ! Component: 3150 - total flux cleaned = -0.00253452 Jy ! Component: 3200 - total flux cleaned = -0.00254159 Jy ! Component: 3250 - total flux cleaned = -0.00253456 Jy ! Component: 3300 - total flux cleaned = -0.00256961 Jy ! Component: 3350 - total flux cleaned = -0.00258348 Jy ! Component: 3400 - total flux cleaned = -0.00259722 Jy ! Component: 3450 - total flux cleaned = -0.00259038 Jy ! Component: 3500 - total flux cleaned = -0.0025972 Jy ! Component: 3550 - total flux cleaned = -0.00260404 Jy ! Component: 3600 - total flux cleaned = -0.00262412 Jy ! Component: 3650 - total flux cleaned = -0.00261752 Jy ! Component: 3700 - total flux cleaned = -0.00261097 Jy ! Component: 3750 - total flux cleaned = -0.00261097 Jy ! Component: 3800 - total flux cleaned = -0.00260445 Jy ! Component: 3850 - total flux cleaned = -0.00259151 Jy ! Component: 3900 - total flux cleaned = -0.00259157 Jy ! Component: 3950 - total flux cleaned = -0.00257883 Jy ! Component: 4000 - total flux cleaned = -0.00258514 Jy ! Component: 4050 - total flux cleaned = -0.00255357 Jy ! Total flux subtracted in 4096 components = -0.0025536 Jy ! Clean residual min=-0.000459 max=0.000350 Jy/beam ! Clean residual mean=0.000001 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.0619502 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 362 components and 0.0619502 Jy ![Exited script file: muppet] wmap "J2309-0458_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 17.08 at -16.89 degrees (North through East) ! Clean map min=-0.00097551 max=0.06268 Jy/beam ! Writing clean map to FITS file: J2309-0458_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0626802 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000116426 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.55724 0.55724 1.11448 2.22896 4.45792 8.91583 17.8317 35.6633 71.3267 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 17.08 at -16.89 degrees (North through East) ! Clean map min=-0.00097551 max=0.06268 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2309-0458_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:07:52 2019