! Started logfile: J2309-0458_S_2017_09_26_pus_uvs.log on Sat May 11 13:08:30 2019 obs J2309-0458_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2309-0458_S_2017_09_26_pus_uva.fits ! AN table 1: 237 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.572082 visibilities/baseline/integration-bin. ! Found source: J2309-0458 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 19524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2309-0458_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 786 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 850 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 776 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1351 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960925Jy sigma=0.008129 ! Fit after self-cal, rms=0.935905Jy sigma=0.007941 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=14.79 mas, bpa=-14.27 degrees ! Estimated noise=1366.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0546283 Jy ! Component: 100 - total flux cleaned = 0.0669172 Jy ! Total flux subtracted in 100 components = 0.0669172 Jy ! Clean residual min=-0.005813 max=0.005559 Jy/beam ! Clean residual mean=-0.000025 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.0669172 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0669172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082888Jy sigma=0.000649 ! Fit after self-cal, rms=0.082690Jy sigma=0.000648 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.261 mas, bmaj=16.27 mas, bpa=-13.34 degrees ! Estimated noise=705.034 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000690809 Jy ! Component: 100 - total flux cleaned = 0.000692838 Jy ! Component: 150 - total flux cleaned = 0.000651299 Jy ! Component: 200 - total flux cleaned = 0.000615471 Jy ! Total flux subtracted in 200 components = 0.000615471 Jy ! Clean residual min=-0.001998 max=0.001838 Jy/beam ! Clean residual mean=-0.000005 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0675327 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.0675327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082667Jy sigma=0.000648 ! Fit after self-cal, rms=0.082664Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.02 KP 1.03 ! LA 1.03 MK 0.99 NL 0.93 OV 1.03 ! PT 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.02 HN 1.00 KP 0.98 ! LA 0.98 MK 1.03 NL 1.06 OV 1.07 ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.08 HN 1.01 KP 0.96 ! LA 0.98 MK 1.07 NL 0.98 OV 1.03 ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.93 KP 1.00* ! LA 1.03 MK 0.97 NL 1.00* OV 0.77 ! PT 0.98 ! ! ! Fit before self-cal, rms=0.082664Jy sigma=0.000648 ! Fit after self-cal, rms=0.080502Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.263 mas, bmaj=16.25 mas, bpa=-13.34 degrees ! Estimated noise=706.958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128957 Jy ! Component: 100 - total flux cleaned = 4.50933e-05 Jy ! Component: 150 - total flux cleaned = 5.70384e-05 Jy ! Component: 200 - total flux cleaned = 4.55392e-05 Jy ! Total flux subtracted in 200 components = 4.55392e-05 Jy ! Clean residual min=-0.001891 max=0.001692 Jy/beam ! Clean residual mean=-0.000003 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0675782 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.0675782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080495Jy sigma=0.000645 ! Fit after self-cal, rms=0.080423Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080423Jy sigma=0.000645 ! Fit after self-cal, rms=0.079974Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.271 mas, bmaj=16.25 mas, bpa=-13.33 degrees ! Estimated noise=706.054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000357914 Jy ! Component: 100 - total flux cleaned = -0.00038484 Jy ! Component: 150 - total flux cleaned = -0.00036324 Jy ! Component: 200 - total flux cleaned = -0.000325008 Jy ! Total flux subtracted in 200 components = -0.000325008 Jy ! Clean residual min=-0.001377 max=0.001470 Jy/beam ! Clean residual mean=-0.000000 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0672532 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 0.0672532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079969Jy sigma=0.000644 ! Fit after self-cal, rms=0.079964Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.08409e-05 Jy ! Component: 100 - total flux cleaned = 7.17093e-05 Jy ! Component: 150 - total flux cleaned = 8.83118e-05 Jy ! Component: 200 - total flux cleaned = 8.86858e-05 Jy ! Total flux subtracted in 200 components = 8.86858e-05 Jy ! Clean residual min=-0.001447 max=0.001444 Jy/beam ! Clean residual mean=-0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0673419 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.0673419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079962Jy sigma=0.000644 ! Fit after self-cal, rms=0.079965Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079965Jy sigma=0.000644 ! Fit after self-cal, rms=0.079925Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.28 mas, bmaj=16.25 mas, bpa=-13.31 degrees ! Estimated noise=705.629 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214142 Jy ! Component: 100 - total flux cleaned = -0.000215697 Jy ! Component: 150 - total flux cleaned = -0.000200322 Jy ! Component: 200 - total flux cleaned = -0.000173096 Jy ! Total flux subtracted in 200 components = -0.000173096 Jy ! Clean residual min=-0.001394 max=0.001517 Jy/beam ! Clean residual mean=-0.000000 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0671688 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.0671688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079923Jy sigma=0.000644 ! Fit after self-cal, rms=0.079921Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.78059e-05 Jy ! Component: 100 - total flux cleaned = 3.23e-05 Jy ! Component: 150 - total flux cleaned = 2.71289e-05 Jy ! Component: 200 - total flux cleaned = 2.24804e-05 Jy ! Total flux subtracted in 200 components = 2.24804e-05 Jy ! Clean residual min=-0.001396 max=0.001526 Jy/beam ! Clean residual mean=-0.000000 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0671913 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.0671913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079920Jy sigma=0.000644 ! Fit after self-cal, rms=0.079919Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079919Jy sigma=0.000644 ! Fit after self-cal, rms=0.079891Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.998 mas, bmaj=17.46 mas, bpa=-5.77 degrees ! Estimated noise=789.972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.58931e-05 Jy ! Component: 100 - total flux cleaned = -8.95699e-05 Jy ! Component: 150 - total flux cleaned = -9.00292e-05 Jy ! Component: 200 - total flux cleaned = -8.47407e-05 Jy ! Total flux subtracted in 200 components = -8.47407e-05 Jy ! Clean residual min=-0.001474 max=0.001673 Jy/beam ! Clean residual mean=-0.000000 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0671066 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 79 components and 0.0671066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079891Jy sigma=0.000644 ! Fit after self-cal, rms=0.079891Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.55934e-05 Jy ! Component: 100 - total flux cleaned = -4.11312e-06 Jy ! Component: 150 - total flux cleaned = 5.76571e-06 Jy ! Component: 200 - total flux cleaned = 1.32323e-06 Jy ! Total flux subtracted in 200 components = 1.32323e-06 Jy ! Clean residual min=-0.001476 max=0.001675 Jy/beam ! Clean residual mean=-0.000000 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0671079 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 84 components and 0.0671079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079891Jy sigma=0.000644 ! Fit after self-cal, rms=0.079891Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.288 mas, bmaj=16.23 mas, bpa=-13.29 degrees ! Estimated noise=705.498 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.288 x 16.23 at -13.29 degrees (North through East) ! Clean map min=-0.0013933 max=0.067281 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=15.02 mas, bpa=-14.48 degrees ! Estimated noise=1025.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516767 Jy ! Component: 100 - total flux cleaned = 0.062988 Jy ! Component: 150 - total flux cleaned = 0.0660538 Jy ! Component: 200 - total flux cleaned = 0.0672884 Jy ! Total flux subtracted in 200 components = 0.0672884 Jy ! Clean residual min=-0.002051 max=0.002136 Jy/beam ! Clean residual mean=0.000001 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0672884 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0672884 Jy ! Inverting map and beam ! Estimated beam: bmin=4.288 mas, bmaj=16.23 mas, bpa=-13.29 degrees ! Estimated noise=705.498 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.44226e-05 Jy ! Component: 100 - total flux cleaned = -0.000217343 Jy ! Component: 150 - total flux cleaned = -0.000296318 Jy ! Component: 200 - total flux cleaned = -0.00031837 Jy ! Total flux subtracted in 200 components = -0.00031837 Jy ! Clean residual min=-0.001404 max=0.001430 Jy/beam ! Clean residual mean=0.000000 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.06697 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.06697 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.998 mas, bmaj=17.46 mas, bpa=-5.77 degrees ! Estimated noise=789.972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128899 Jy ! Component: 100 - total flux cleaned = 0.000129388 Jy ! Component: 150 - total flux cleaned = 0.000140967 Jy ! Component: 200 - total flux cleaned = 0.000140847 Jy ! Total flux subtracted in 200 components = 0.000140847 Jy ! Clean residual min=-0.001453 max=0.001643 Jy/beam ! Clean residual mean=-0.000000 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0671108 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40364e-07 Jy ! Component: 100 - total flux cleaned = 9.22979e-06 Jy ! Component: 150 - total flux cleaned = 9.30426e-06 Jy ! Component: 200 - total flux cleaned = 1.69532e-05 Jy ! Total flux subtracted in 200 components = 1.69532e-05 Jy ! Clean residual min=-0.001461 max=0.001652 Jy/beam ! Clean residual mean=-0.000000 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0671278 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.0671278 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.288 mas, bmaj=16.23 mas, bpa=-13.29 degrees ! Estimated noise=705.498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.3906e-05 Jy ! Component: 100 - total flux cleaned = -1.76742e-06 Jy ! Component: 150 - total flux cleaned = -2.05164e-05 Jy ! Component: 200 - total flux cleaned = -2.91181e-05 Jy ! Total flux subtracted in 200 components = -2.91181e-05 Jy ! Clean residual min=-0.001403 max=0.001525 Jy/beam ! Clean residual mean=-0.000000 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0670987 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.0670987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079894Jy sigma=0.000644 ! Fit after self-cal, rms=0.079891Jy sigma=0.000644 wmodel J2309-0458_S_2017_09_26_pus_map.mod ! Writing 55 model components to file: J2309-0458_S_2017_09_26_pus_map.mod wobs J2309-0458_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2309-0458_S_2017_09_26_pus_uvs.fits wwins J2309-0458_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J2309-0458_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362789 Jy ! Component: 100 - total flux cleaned = 0.000510669 Jy ! Component: 150 - total flux cleaned = 0.00053414 Jy ! Component: 200 - total flux cleaned = 0.000579 Jy ! Component: 250 - total flux cleaned = 0.000601407 Jy ! Component: 300 - total flux cleaned = 0.000642639 Jy ! Component: 350 - total flux cleaned = 0.000721324 Jy ! Component: 400 - total flux cleaned = 0.000683895 Jy ! Component: 450 - total flux cleaned = 0.000776827 Jy ! Component: 500 - total flux cleaned = 0.00083074 Jy ! Component: 550 - total flux cleaned = 0.000900898 Jy ! Component: 600 - total flux cleaned = 0.000969394 Jy ! Component: 650 - total flux cleaned = 0.00103624 Jy ! Component: 700 - total flux cleaned = 0.00108513 Jy ! Component: 750 - total flux cleaned = 0.00119674 Jy ! Component: 800 - total flux cleaned = 0.00129018 Jy ! Component: 850 - total flux cleaned = 0.00135102 Jy ! Component: 900 - total flux cleaned = 0.00144045 Jy ! Component: 950 - total flux cleaned = 0.00157134 Jy ! Component: 1000 - total flux cleaned = 0.00162839 Jy ! Component: 1050 - total flux cleaned = 0.00174066 Jy ! Component: 1100 - total flux cleaned = 0.001837 Jy ! Component: 1150 - total flux cleaned = 0.00191771 Jy ! Component: 1200 - total flux cleaned = 0.00201004 Jy ! Component: 1250 - total flux cleaned = 0.00207522 Jy ! Component: 1300 - total flux cleaned = 0.00215188 Jy ! Component: 1350 - total flux cleaned = 0.00220223 Jy ! Component: 1400 - total flux cleaned = 0.00230093 Jy ! Component: 1450 - total flux cleaned = 0.00238566 Jy ! Component: 1500 - total flux cleaned = 0.00243335 Jy ! Component: 1550 - total flux cleaned = 0.00251555 Jy ! Component: 1600 - total flux cleaned = 0.00261936 Jy ! Component: 1650 - total flux cleaned = 0.00273293 Jy ! Component: 1700 - total flux cleaned = 0.00278866 Jy ! Component: 1750 - total flux cleaned = 0.00285487 Jy ! Component: 1800 - total flux cleaned = 0.00297442 Jy ! Component: 1850 - total flux cleaned = 0.00306008 Jy ! Component: 1900 - total flux cleaned = 0.00313397 Jy ! Component: 1950 - total flux cleaned = 0.00322752 Jy ! Component: 2000 - total flux cleaned = 0.00323781 Jy ! Component: 2050 - total flux cleaned = 0.00331894 Jy ! Component: 2100 - total flux cleaned = 0.00337896 Jy ! Component: 2150 - total flux cleaned = 0.00342816 Jy ! Component: 2200 - total flux cleaned = 0.00346711 Jy ! Component: 2250 - total flux cleaned = 0.00352463 Jy ! Component: 2300 - total flux cleaned = 0.00357205 Jy ! Component: 2350 - total flux cleaned = 0.0036002 Jy ! Component: 2400 - total flux cleaned = 0.00363731 Jy ! Component: 2450 - total flux cleaned = 0.00364644 Jy ! Component: 2500 - total flux cleaned = 0.00367368 Jy ! Component: 2550 - total flux cleaned = 0.00368268 Jy ! Component: 2600 - total flux cleaned = 0.00369157 Jy ! Component: 2650 - total flux cleaned = 0.00371793 Jy ! Component: 2700 - total flux cleaned = 0.00374411 Jy ! Component: 2750 - total flux cleaned = 0.0037872 Jy ! Component: 2800 - total flux cleaned = 0.00382978 Jy ! Component: 2850 - total flux cleaned = 0.00387202 Jy ! Component: 2900 - total flux cleaned = 0.00390546 Jy ! Component: 2950 - total flux cleaned = 0.00396339 Jy ! Component: 3000 - total flux cleaned = 0.00401238 Jy ! Component: 3050 - total flux cleaned = 0.00405292 Jy ! Component: 3100 - total flux cleaned = 0.00411729 Jy ! Component: 3150 - total flux cleaned = 0.00414113 Jy ! Component: 3200 - total flux cleaned = 0.00419633 Jy ! Component: 3250 - total flux cleaned = 0.00421985 Jy ! Component: 3300 - total flux cleaned = 0.00428186 Jy ! Component: 3350 - total flux cleaned = 0.0043126 Jy ! Component: 3400 - total flux cleaned = 0.00436611 Jy ! Component: 3450 - total flux cleaned = 0.00438124 Jy ! Component: 3500 - total flux cleaned = 0.00444132 Jy ! Component: 3550 - total flux cleaned = 0.00447863 Jy ! Component: 3600 - total flux cleaned = 0.00450816 Jy ! Component: 3650 - total flux cleaned = 0.00455214 Jy ! Component: 3700 - total flux cleaned = 0.00456678 Jy ! Component: 3750 - total flux cleaned = 0.00461747 Jy ! Component: 3800 - total flux cleaned = 0.00466058 Jy ! Component: 3850 - total flux cleaned = 0.00469614 Jy ! Component: 3900 - total flux cleaned = 0.00470328 Jy ! Component: 3950 - total flux cleaned = 0.00474547 Jy ! Component: 4000 - total flux cleaned = 0.00475242 Jy ! Component: 4050 - total flux cleaned = 0.00478718 Jy ! Total flux subtracted in 4096 components = 0.00480102 Jy ! Clean residual min=-0.000464 max=0.000468 Jy/beam ! Clean residual mean=0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0718997 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 357 components and 0.0718997 Jy ![Exited script file: muppet] wmap "J2309-0458_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.288 x 16.23 at -13.29 degrees (North through East) ! Clean map min=-0.0010791 max=0.067228 Jy/beam ! Writing clean map to FITS file: J2309-0458_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0672282 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000127711 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.569899 0.569899 1.1398 2.2796 4.55919 9.11838 18.2368 36.4735 72.9471 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.288 x 16.23 at -13.29 degrees (North through East) ! Clean map min=-0.0010791 max=0.067228 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2309-0458_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:08:36 2019